Move Zephyr app into subdirectory.

18 files changed, 0 insertions, 594 deletions

diff --git a/boards/Kconfig b/boards/Kconfig
deleted file mode 100644
index 1c645e6..0000000
--- a/boards/Kconfig
+++ /dev/null
@@ -1 +0,0 @@
-rsource "shields/*/Kconfig.shield"
diff --git a/boards/arm/planck/CMakeLists.txt b/boards/arm/planck/CMakeLists.txt
deleted file mode 100644
index f26de66..0000000
--- a/boards/arm/planck/CMakeLists.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-list(APPEND EXTRA_DTC_FLAGS "-qq")
-
-if(CONFIG_PINMUX)
-zephyr_library()
-zephyr_library_sources(pinmux.c)
-zephyr_library_include_directories(${ZEPHYR_BASE}/drivers)
-endif()
diff --git a/boards/arm/planck/Kconfig.board b/boards/arm/planck/Kconfig.board
deleted file mode 100644
index 280b48f..0000000
--- a/boards/arm/planck/Kconfig.board
+++ /dev/null
@@ -1,8 +0,0 @@
-# STM32F3DISCOVERY board configuration
-
-# Copyright (c) 2017 I-SENSE group of ICCS
-# SPDX-License-Identifier: Apache-2.0
-
-config BOARD_STM32F3_DISCO
-	bool "STM32F3DISCOVERY Development Board"
-	depends on SOC_STM32F303XC
diff --git a/boards/arm/planck/Kconfig.defconfig b/boards/arm/planck/Kconfig.defconfig
deleted file mode 100644
index 3ccd178..0000000
--- a/boards/arm/planck/Kconfig.defconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-# Planck keyboard configuration
-
-# Copyright (c) 2017 I-SENSE group of ICCS
-# SPDX-License-Identifier: Apache-2.0
-
-if BOARD_PLANCK_REV6
-
-config BOARD
-	default "planck_rev6"
-
-config UART_1
-	default y
-	depends on UART_CONSOLE
-
-if I2C
-
-config I2C_1
-	default y
-
-config I2C_2
-	default y
-
-endif # I2C
-
-if SPI
-
-config SPI_1
-	default y
-
-config SPI_2
-	default y
-
-endif # SPI
-
-config CAN_1
-	default y
-	depends on CAN
-
-endif # BOARD_PLANCK_REV6
diff --git a/boards/arm/planck/board.cmake b/boards/arm/planck/board.cmake
deleted file mode 100644
index e2bdf48..0000000
--- a/boards/arm/planck/board.cmake
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-board_runner_args(jlink "--device=STM32F303VC" "--speed=4000")
-
-include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
-include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
diff --git a/boards/arm/planck/pinmux.c b/boards/arm/planck/pinmux.c
deleted file mode 100644
index 76bd6d1..0000000
--- a/boards/arm/planck/pinmux.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (c) 2017 I-SENSE group of ICCS
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-#include <kernel.h>
-#include <device.h>
-#include <init.h>
-#include <drivers/pinmux.h>
-#include <sys/sys_io.h>
-
-#include <pinmux/stm32/pinmux_stm32.h>
-
-/* pin assignments for STM32F3DISCOVERY board */
-static const struct pin_config pinconf[] = {
-#ifdef CONFIG_UART_1
-	{STM32_PIN_PC4, STM32F3_PINMUX_FUNC_PC4_USART1_TX},
-	{STM32_PIN_PC5, STM32F3_PINMUX_FUNC_PC5_USART1_RX},
-#endif	/* CONFIG_UART_1 */
-#ifdef CONFIG_UART_2
-	{STM32_PIN_PA2, STM32F3_PINMUX_FUNC_PA2_USART2_TX},
-	{STM32_PIN_PA3, STM32F3_PINMUX_FUNC_PA3_USART2_RX},
-#endif	/* CONFIG_UART_2 */
-#ifdef CONFIG_I2C_1
-	{STM32_PIN_PB6, STM32F3_PINMUX_FUNC_PB6_I2C1_SCL},
-	{STM32_PIN_PB7, STM32F3_PINMUX_FUNC_PB7_I2C1_SDA},
-#endif /* CONFIG_I2C_1 */
-#ifdef CONFIG_I2C_2
-	{STM32_PIN_PA9, STM32F3_PINMUX_FUNC_PA9_I2C2_SCL},
-	{STM32_PIN_PA10, STM32F3_PINMUX_FUNC_PA10_I2C2_SDA},
-#endif /* CONFIG_I2C_2 */
-#ifdef CONFIG_SPI_1
-#ifdef CONFIG_SPI_STM32_USE_HW_SS
-	{STM32_PIN_PA4, STM32F3_PINMUX_FUNC_PA4_SPI1_NSS},
-#endif /* CONFIG_SPI_STM32_USE_HW_SS */
-	{STM32_PIN_PA5, STM32F3_PINMUX_FUNC_PA5_SPI1_SCK},
-	{STM32_PIN_PA6, STM32F3_PINMUX_FUNC_PA6_SPI1_MISO},
-	{STM32_PIN_PA7, STM32F3_PINMUX_FUNC_PA7_SPI1_MOSI},
-#endif /* CONFIG_SPI_1 */
-#ifdef CONFIG_SPI_2
-#ifdef CONFIG_SPI_STM32_USE_HW_SS
-	{STM32_PIN_PB12, STM32F3_PINMUX_FUNC_PB12_SPI2_NSS},
-#endif /* CONFIG_SPI_STM32_USE_HW_SS */
-	{STM32_PIN_PB13, STM32F3_PINMUX_FUNC_PB13_SPI2_SCK},
-	{STM32_PIN_PB14, STM32F3_PINMUX_FUNC_PB14_SPI2_MISO},
-	{STM32_PIN_PB15, STM32F3_PINMUX_FUNC_PB15_SPI2_MOSI},
-#endif /* CONFIG_SPI_2 */
-#ifdef CONFIG_USB_DC_STM32
-	{STM32_PIN_PA11, STM32F3_PINMUX_FUNC_PA11_USB_DM},
-	{STM32_PIN_PA12, STM32F3_PINMUX_FUNC_PA12_USB_DP},
-#endif	/* CONFIG_USB_DC_STM32 */
-#ifdef CONFIG_CAN_1
-	{STM32_PIN_PD0, STM32F3_PINMUX_FUNC_PD0_CAN1_RX},
-	{STM32_PIN_PD1, STM32F3_PINMUX_FUNC_PD1_CAN1_TX},
-#endif /* CONFIG_CAN_1 */
-};
-
-static int pinmux_stm32_init(struct device *port)
-{
-	ARG_UNUSED(port);
-
-	stm32_setup_pins(pinconf, ARRAY_SIZE(pinconf));
-
-	return 0;
-}
-
-SYS_INIT(pinmux_stm32_init, PRE_KERNEL_1,
-		CONFIG_PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY);
diff --git a/boards/arm/planck/planck_rev6.dts b/boards/arm/planck/planck_rev6.dts
deleted file mode 100644
index 58de7a4..0000000
--- a/boards/arm/planck/planck_rev6.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (c) 2017 I-SENSE group of ICCS
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-/dts-v1/;
-#include <st/f3/stm32f303.dtsi>
-
-/ {
-	model = "Plack PCD, rev6";
-	compatible = "planck,rev6", "st,stm32f303";
-
-	chosen {
-		zephyr,console = &usart1;
-		zephyr,shell-uart = &usart1;
-		zephyr,sram = &sram0;
-		zephyr,flash = &flash0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		red_led_3: led_3 {
-			gpios = <&gpioe 9 GPIO_ACTIVE_HIGH>;
-			label = "User LD3";
-		};
-		blue_led_4: led_4 {
-			gpios = <&gpioe 8 GPIO_ACTIVE_HIGH>;
-			label = "User LD4";
-		};
-		orange_led_5: led_5 {
-			gpios = <&gpioe 10 GPIO_ACTIVE_HIGH>;
-			label = "User LD5";
-		};
-		green_led_6: led_6 {
-			gpios = <&gpioe 15 GPIO_ACTIVE_HIGH>;
-			label = "User LD6";
-		};
-		green_led_7: led_7 {
-			gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>;
-			label = "User LD7";
-		};
-		orange_led_8: led_8 {
-			gpios = <&gpioe 14 GPIO_ACTIVE_HIGH>;
-			label = "User LD8";
-		};
-		blue_led_9: led_9 {
-			gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>;
-			label = "User LD9";
-		};
-		red_led_10: led_10 {
-			gpios = <&gpioe 13 GPIO_ACTIVE_HIGH>;
-			label = "User LD10";
-		};
-	};
-
-	kscan {
-		compatible = "gpio-kscan";
-		label = "Keyscan Matrix";
-		row-gpios = <&gpioa 10 GPIO_ACTIVE_HIGH>,
-			       <&gpioa 9 GPIO_ACTIVE_HIGH>,
-			       <&gpioa 8 GPIO_ACTIVE_HIGH>,
-			       <&gpiob 15 GPIO_ACTIVE_HIGH>,
-			       <&gpioc 13 GPIO_ACTIVE_HIGH>,
-			       <&gpioc 14 GPIO_ACTIVE_HIGH>,
-			       <&gpioc 15 GPIO_ACTIVE_HIGH>,
-			       <&gpioa 2 GPIO_ACTIVE_HIGH>;
-		col-gpios = <&gpiob 11 GPIO_ACTIVE_HIGH>,
-				<&gpiob 10 GPIO_ACTIVE_HIGH>,
-				<&gpiob 2 GPIO_ACTIVE_HIGH>,
-				<&gpiob 1 GPIO_ACTIVE_HIGH>,
-				<&gpioa 7 GPIO_ACTIVE_HIGH>,
-				<&gpiob 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		user_button: button {
-			label = "User";
-			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	aliases {
-		led0 = &green_led_6;
-		led1 = &green_led_7;
-		sw0 = &user_button;
-		can-primary = &can1;
-	};
-};
-
-&usart1 {
-	current-speed = <115200>;
-	status = "okay";
-};
-
-&usart2 {
-	current-speed = <115200>;
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <I2C_BITRATE_FAST>;
-
-	lsm303dlhc-magn@1e {
-		compatible = "st,lsm303dlhc-magn";
-		reg = <0x1e>;
-		label = "LSM303DLHC-MAGN";
-	};
-
-	lsm303dlhc-accel@19 {
-		compatible = "st,lis2dh", "st,lsm303dlhc-accel";
-		reg = <0x19>;
-		irq-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>,
-			  <&gpioe 5 GPIO_ACTIVE_HIGH>;
-		label = "LSM303DLHC-ACCEL";
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	clock-frequency = <I2C_BITRATE_FAST>;
-};
-
-&spi1 {
-	status = "okay";
-};
-
-&spi2 {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&flash0 {
-	/*
-	 * For more information, see:
-	 * http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions
-	 */
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* Set 6Kb of storage at the end of the 256Kb of flash */
-		storage_partition: partition@3e800 {
-			label = "storage";
-			reg = <0x0003e800 0x00001800>;
-		};
-	};
-};
diff --git a/boards/arm/planck/planck_rev6.yaml b/boards/arm/planck/planck_rev6.yaml
deleted file mode 100644
index 9c5af3f..0000000
--- a/boards/arm/planck/planck_rev6.yaml
+++ /dev/null
@@ -1,19 +0,0 @@
-identifier: planck_rev6
-name: PLANKREV6
-type: keyboard
-arch: arm
-toolchain:
-  - zephyr
-  - gnuarmemb
-  - xtools
-ram: 40
-supported:
-  - gpio
-  - i2c
-  - counter
-  - spi
-  - usb_device
-  - lsm303dlhc
-  - nvs
-  - can
-  - kscan
diff --git a/boards/arm/planck/planck_rev6_defconfig b/boards/arm/planck/planck_rev6_defconfig
deleted file mode 100644
index 17330e2..0000000
--- a/boards/arm/planck/planck_rev6_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-CONFIG_SOC_SERIES_STM32F3X=y
-CONFIG_SOC_STM32F303XC=y
-# 72MHz system clock
-CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=72000000
-
-# Floating Point Options
-CONFIG_FLOAT=y
-
-# enable uart driver
-CONFIG_SERIAL=y
-
-# enable console
-CONFIG_CONSOLE=y
-CONFIG_UART_CONSOLE=y
-
-#enable I2C
-CONFIG_I2C=y
-
-#enable SPI
-CONFIG_SPI=y
-
-# enable pinmux
-CONFIG_PINMUX=y
-
-# enable GPIO
-CONFIG_GPIO=y
-
-# clock configuration
-CONFIG_CLOCK_CONTROL=y
-
-# kscan matrix
-CONFIG_KSCAN=y
-CONFIG_KSCAN_GPIO=y
-
-# Clock configuration for Cube Clock control driver
-CONFIG_CLOCK_STM32_HSE_CLOCK=8000000
-CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
-# use HSE as PLL input
-CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
-# however, the board does not have an external oscillator, so just use
-# the 8MHz clock signal coming from integrated STLink
-CONFIG_CLOCK_STM32_HSE_BYPASS=y
-# produce 72MHz clock at PLL output
-CONFIG_CLOCK_STM32_PLL_PREDIV=1
-CONFIG_CLOCK_STM32_PLL_MULTIPLIER=9
-CONFIG_CLOCK_STM32_AHB_PRESCALER=1
-CONFIG_CLOCK_STM32_APB1_PRESCALER=2
-CONFIG_CLOCK_STM32_APB2_PRESCALER=1
diff --git a/boards/native_posix.conf b/boards/native_posix.conf
deleted file mode 100644
index 5bfb366..0000000
--- a/boards/native_posix.conf
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_KSCAN=n
-CONFIG_ZMK_KSCAN_MOCK_DRIVER=y
-CONFIG_ZMK_KSCAN_COMPOSITE_DRIVER=y
-CONFIG_ZMK_KSCAN_GPIO_DRIVER=n
-CONFIG_GPIO=n
-CONFIG_ZMK_BLE=n
-CONFIG_LOG=y
-CONFIG_KSCAN_LOG_LEVEL_DBG=y
-CONFIG_ZMK_LOG_LEVEL_DBG=y
diff --git a/boards/native_posix.overlay b/boards/native_posix.overlay
deleted file mode 100644
index 9d92bee..0000000
--- a/boards/native_posix.overlay
+++ /dev/null
@@ -1,79 +0,0 @@
-#include <dt-bindings/zmk/keys.h>
-#include <zmk/kscan-mock.h>
-
-/ {
-	chosen {
-		zmk,kscan = &kscan0;
-		zmk,keymap = &keymap0;
-	};
-
-	kscan0: kscan_0 {
-		compatible = "zmk,kscan-composite";
-		label = "KSCAN_COMP";
-		rows = <2>;
-		columns = <4>;
-
-		left: left {
-			kscan = <&left_hand>;
-		};
-
-		right: right {
-			kscan = <&right_hand>;
-			column-offset = <2>;
-		};
-	};
-
-	left_hand: kscan_1 {
-		compatible = "zmk,kscan-mock";
-		label = "KSCAN_LEFT";
-
-		rows = <2>;
-		columns = <2>;
-		events = <ZMK_MOCK_PRESS(0,1,300) ZMK_MOCK_PRESS(0,0,300) ZMK_MOCK_RELEASE(0,0,300) ZMK_MOCK_RELEASE(0,1,300)>;
-		// events = <ZMK_MOCK_PRESS(0,0,800) ZMK_MOCK_RELEASE(0,0,800) ZMK_MOCK_PRESS(0,1,800) ZMK_MOCK_RELEASE(0,1,800)>;
-	};
-
-	right_hand: kscan_2 {
-		compatible = "zmk,kscan-mock";
-		label = "KSCAN_RIGHT";
-
-		rows = <2>;
-		columns = <2>;
-		events = <ZMK_MOCK_PRESS(1,1,800) ZMK_MOCK_RELEASE(1,1,100) ZMK_MOCK_PRESS(0,1,800) ZMK_MOCK_RELEASE(0,1,100)>;
-	};
-
-	keymap0: keymap {
-		compatible = "zmk,keymap";
-		label ="Default keymap";
-		layers = <&default &lower &raise>;
-	};
-
-	layers {
-		compatible = "zmk,layers";
-
-		default: layer_0 {
-			label = "DEFAULT";
-			keys =
-			<
-				KC_A MT(MOD_LSFT, KC_B) KC_C KC_D
-				KC_E KC_F KC_G KC_H
-			>;
-		};
-
-		lower: layer_1 {
-			label = "LOWER";
-			keys = <
-				KC_A KC_B KC_C KC_D
-				KC_E KC_F KC_G KC_H
-			>;
-		};
-
-		raise: layer_2 {
-			label = "RAISE";
-			keys = <
-				KC_E KC_F KC_G KC_H 
-				KC_A KC_B KC_C KC_D
-			>;
-		};
-	};
-};
diff --git a/boards/shields/petejohanson_handwire/Kconfig.defconfig b/boards/shields/petejohanson_handwire/Kconfig.defconfig
deleted file mode 100644
index 7da09ac..0000000
--- a/boards/shields/petejohanson_handwire/Kconfig.defconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-
-if SHIELD_PETEJOHANSON_HANDWIRE
-
-config ZMK_KEYBOARD_NAME
-	default "Pete's Handwire Breadboard"
-
-config ZMK_BLE
-	default y
-
-config ZMK_ACTION_MOD_TAP
-	default y
-
-endif
diff --git a/boards/shields/petejohanson_handwire/Kconfig.shield b/boards/shields/petejohanson_handwire/Kconfig.shield
deleted file mode 100644
index f6e8a3f..0000000
--- a/boards/shields/petejohanson_handwire/Kconfig.shield
+++ /dev/null
@@ -1,5 +0,0 @@
-# Copyright (c) 2019 Linaro Limited
-# SPDX-License-Identifier: Apache-2.0
-
-config SHIELD_PETEJOHANSON_HANDWIRE
-	def_bool $(shields_list_contains,petejohanson_handwire)
diff --git a/boards/shields/petejohanson_handwire/keymaps/default/include/keymap.h b/boards/shields/petejohanson_handwire/keymaps/default/include/keymap.h
deleted file mode 100644
index 01cd9e5..0000000
--- a/boards/shields/petejohanson_handwire/keymaps/default/include/keymap.h
+++ /dev/null
@@ -1,5 +0,0 @@
-
-#include <dt-bindings/zmk/keys.h>
-
-#define CC_RAIS ZC_CSTM(1)
-#define CC_LOWR ZC_CSTM(2)
\ No newline at end of file
diff --git a/boards/shields/petejohanson_handwire/keymaps/default/keymap.c b/boards/shields/petejohanson_handwire/keymaps/default/keymap.c
deleted file mode 100644
index 067cd08..0000000
--- a/boards/shields/petejohanson_handwire/keymaps/default/keymap.c
+++ /dev/null
@@ -1,34 +0,0 @@
-
-#include <zmk/keys.h>
-#include <zmk/keymap.h>
-#include <keymap.h>
-
-bool zmk_handle_key_user(struct zmk_key_event *key_event)
-{
-	switch (key_event->key)
-	{
-	case CC_LOWR:
-		if (key_event->pressed)
-		{
-			zmk_keymap_layer_activate(1);
-		}
-		else
-		{
-			zmk_keymap_layer_deactivate(1);
-		}
-
-		return false;
-	case CC_RAIS:
-		if (key_event->pressed)
-		{
-			zmk_keymap_layer_activate(2);
-		}
-		else
-		{
-			zmk_keymap_layer_deactivate(2);
-		}
-		return false;
-	}
-
-	return true;
-};
diff --git a/boards/shields/petejohanson_handwire/keymaps/default/keymap.overlay b/boards/shields/petejohanson_handwire/keymaps/default/keymap.overlay
deleted file mode 100644
index d87363f..0000000
--- a/boards/shields/petejohanson_handwire/keymaps/default/keymap.overlay
+++ /dev/null
@@ -1,41 +0,0 @@
-#include <dt-bindings/zmk/keys.h>
-#include <keymap.h>
-
-/ {
-	chosen {
-		zmk,keymap = &keymap0;
-	};
-	keymap0: keymap {
-		compatible = "zmk,keymap";
-		label ="Default keymap";
-		layers = <&default &lower &raise>;
-	};
-
-	layers {
-		compatible = "zmk,layers";
-
-		default: layer_0 {
-			label = "DEFAULT";
-			keys =
-	<
-	KC_A MT(MOD_LSFT, KC_B)    ZC_NO ZC_NO
-	CC_RAIS CC_LOWR            ZC_NO ZC_NO
-	>;
-		};
-
-		lower: layer_1 {
-			label = "LOWER";
-			keys = <
-			KC_MPLY KC_MNXT    ZC_NO ZC_NO
-			ZC_TRNS ZC_TRNS    ZC_NO ZC_NO
-			>;
-		};
-
-		raise: layer_2 {
-			label = "RAISE";
-			keys = <
-			KC_C KC_D          ZC_NO ZC_NO
-			ZC_TRNS ZC_TRNS    ZC_NO ZC_NO>;
-		};
-	};
-};
diff --git a/boards/shields/petejohanson_handwire/petejohanson_handwire.conf b/boards/shields/petejohanson_handwire/petejohanson_handwire.conf
deleted file mode 100644
index 63829ba..0000000
--- a/boards/shields/petejohanson_handwire/petejohanson_handwire.conf
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_ZMK_KSCAN_COMPOSITE_DRIVER=y
diff --git a/boards/shields/petejohanson_handwire/petejohanson_handwire.overlay b/boards/shields/petejohanson_handwire/petejohanson_handwire.overlay
deleted file mode 100644
index d65b3b1..0000000
--- a/boards/shields/petejohanson_handwire/petejohanson_handwire.overlay
+++ /dev/null
@@ -1,44 +0,0 @@
-
-/ {
-	chosen {
-		zmk,kscan = &kscan0;
-	};
-
-	kscan0: kscan_0 {
-		compatible = "zmk,kscan-composite";
-		label = "KSCAN_COMP";
-		rows = <2>;
-		columns = <4>;
-
-		left {
-			kscan = <&left_hand>;
-		};
-
-		right {
-			kscan = <&right_hand>;
-			column-offset = <2>;
-		};
-	};
-
-	left_hand: kscan_1 {
-		compatible = "gpio-kscan";
-		label = "KSCAN_LEFT";
-
-		diode-direction = "row2col";
-		row-gpios = <&arduino_header 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
-		            <&arduino_header 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
-		col-gpios = <&arduino_header 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
-		            <&arduino_header 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
-	};
-
-	right_hand: kscan_2 {
-		compatible = "gpio-kscan";
-		label = "KSCAN_RIGHT";
-
-		diode-direction = "row2col";
-		row-gpios = <&arduino_header 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
-		            <&arduino_header 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
-		col-gpios = <&arduino_header 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>,
-		            <&arduino_header 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
-	};
-};