diff options
Diffstat (limited to 'boards/arm/planck/planck_rev6_defconfig')
| -rw-r--r-- | boards/arm/planck/planck_rev6_defconfig | 50 |
1 files changed, 0 insertions, 50 deletions
diff --git a/boards/arm/planck/planck_rev6_defconfig b/boards/arm/planck/planck_rev6_defconfig deleted file mode 100644 index 17330e2..0000000 --- a/boards/arm/planck/planck_rev6_defconfig +++ /dev/null @@ -1,50 +0,0 @@ -# SPDX-License-Identifier: Apache-2.0 - -CONFIG_SOC_SERIES_STM32F3X=y -CONFIG_SOC_STM32F303XC=y -# 72MHz system clock -CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=72000000 - -# Floating Point Options -CONFIG_FLOAT=y - -# enable uart driver -CONFIG_SERIAL=y - -# enable console -CONFIG_CONSOLE=y -CONFIG_UART_CONSOLE=y - -#enable I2C -CONFIG_I2C=y - -#enable SPI -CONFIG_SPI=y - -# enable pinmux -CONFIG_PINMUX=y - -# enable GPIO -CONFIG_GPIO=y - -# clock configuration -CONFIG_CLOCK_CONTROL=y - -# kscan matrix -CONFIG_KSCAN=y -CONFIG_KSCAN_GPIO=y - -# Clock configuration for Cube Clock control driver -CONFIG_CLOCK_STM32_HSE_CLOCK=8000000 -CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y -# use HSE as PLL input -CONFIG_CLOCK_STM32_PLL_SRC_HSE=y -# however, the board does not have an external oscillator, so just use -# the 8MHz clock signal coming from integrated STLink -CONFIG_CLOCK_STM32_HSE_BYPASS=y -# produce 72MHz clock at PLL output -CONFIG_CLOCK_STM32_PLL_PREDIV=1 -CONFIG_CLOCK_STM32_PLL_MULTIPLIER=9 -CONFIG_CLOCK_STM32_AHB_PRESCALER=1 -CONFIG_CLOCK_STM32_APB1_PRESCALER=2 -CONFIG_CLOCK_STM32_APB2_PRESCALER=1 |