summaryrefslogtreecommitdiff
path: root/firmware/target/arm/as3525
AgeCommit message (Expand)Author
2010-02-21sd-as3525v2: name interrupt bits (no description yet)Rafaël Carré
2010-02-21sd-as3525v2: describe CTYPE bitRafaël Carré
2010-02-21sd-as3525v2: detail MCI_CTRL bitsRafaël Carré
2010-02-21as3525v2: full list of registers + descriptionRafaël Carré
2010-02-17as3525: make clear the CCU bit we can't reset is the IDE interfaceRafaël Carré
2010-02-17as3525v2: use CGU_BASE instead of hardcoded address for unknown registerRafaël Carré
2010-02-17as3525v2: make clear the SD code is debug only and display a messageRafaël Carré
2010-02-17Clip+: LCD display (with FlynDice help)Rafaël Carré
2010-02-15Sansa Clip+: Implement button driver.Jack Halpin
2010-02-08Sansa Clip+: use 8 bits transfers, like DMA transfersRafaël Carré
2010-02-08Add DMA line for SSP as used in Clip+Rafaël Carré
2010-02-08Sansa Clip+: use correct SSP settingsRafaël Carré
2010-02-08Sansa Clip+ has no button lightRafaël Carré
2010-02-07Sansa AMS AS3525v2 SD: remove a case which is never runRafaël Carré
2010-02-07Sansa AMS: do not init memory for AS3525v2Rafaël Carré
2010-02-06as3525: add a few more CGU_PERI definitionsBertrik Sikken
2010-02-05Untested attempt at a Clip+ LCD driver using SSP (PrimeCell PL022)Rafaël Carré
2010-02-05Sansa ASM: clock-target.h needs to know the CPURafaël Carré
2010-02-05Make Clip+ bootloader buildRafaël Carré
2010-01-28sd as3535v2 : remove functions already present in sd.cRafaël Carré
2010-01-26Update on even pixel boundaries on the e200v2 for best performance (was forgo...Thomas Martitz
2010-01-17Sansa c200v2: enable battery chargingBertrik Sikken
2010-01-15Sansa AMS: remove "ata" from SD drivers filenamesRafaël Carré
2010-01-13Sansa as3525v2: move SD embryo code to a common dirRafaël Carré
2010-01-12SansaAMS: Disable voltage scaling.Jack Halpin
2010-01-10Fix svn:keywords property in as3525 target treeBertrik Sikken
2010-01-10Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% inst...Bertrik Sikken
2010-01-08Sansa e200v2/Fuze: Optimize YUV blitting by writing 2 pixel at once to the DB...Thomas Martitz
2010-01-08Clivp2: Fix typo when applying FS#10047Rafaël Carré
2010-01-07Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much...Thomas Martitz
2010-01-07e200v2/Fuze: Correct and simplify clipping clipping code in lcd_update_rect().Thomas Martitz
2010-01-06Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2)Rafaël Carré
2010-01-04Sansa e200v2: LCDRafaël Carré
2010-01-04Sansa Fuze: LCDRafaël Carré
2010-01-03Fix tabsAndree Buschmann
2010-01-01Simplify some expressions using the ? operatorBertrik Sikken
2009-12-31FS#10047 : Clipv2Rafaël Carré
2009-12-20Code police: add missing header file, make some local functions staticBertrik Sikken
2009-12-17Sansa AMS: Fix Red. Write delay is not included for non HAVE_MULTIDRIVE.Jack Halpin
2009-12-17Sansa AMS: Revert 4 bit widebusJack Halpin
2009-12-16Sansa AMS: Make write delay work for non-MULTIDRIVE.Jack Halpin
2009-12-16Sansa AMS: Use small write delay for all non-HS cards including the internal...Jack Halpin
2009-12-15Sansa AMS: Add MCI_RESPONSE_ERROR macro to make code function more obvious.Jack Halpin
2009-12-13Sansa AMS: Implement 4 bit widebus mode for SD cards.Jack Halpin
2009-12-11Sansa AMS: Assume IDE_CLK is used as MCLK for internal SD. We assumed PCLK ...Jack Halpin
2009-12-10Sansa AMS: Add extra delay to the uSD init sequence to enhance card compata...Jack Halpin
2009-12-08Sansa AMS: Run all SD cards within SD Specification frequencies.Jack Halpin
2009-12-06Sansa AMS: Move the boost from SD ident to operating frequency to after the ...Jack Halpin
2009-12-03Sansa AMS: The internal SD does not use the IDE AHB interface so remove refe...Jack Halpin
2009-12-03Sansa AMS: Reduce MCICLK speed on SD cards to 31 MHz.Jack Halpin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 19:40:04 +0000