Meg-FX: s3c register definitions really should be unsigned. Switch from 'int' to 'unsigned long' like other targets.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19325 a1c6a512-1295-4272-9138-f99709370657

9 files changed, 427 insertions, 424 deletions

diff --git a/firmware/export/s3c2440.h b/firmware/export/s3c2440.h
index fe45a1c1ce..f1d41dbae3 100644
--- a/firmware/export/s3c2440.h
+++ b/firmware/export/s3c2440.h
@@ -24,65 +24,65 @@
 #define LCD_BUFFER_SIZE (320*240*2)
 #define TTB_SIZE (0x4000)
 /* must be 16Kb (0x4000) aligned */
-#define TTB_BASE   ((unsigned int *)(0x30000000 + (32*1024*1024) - TTB_SIZE)) /* End of memory */
-#define FRAME   ((short *) ((char *)TTB_BASE - LCD_BUFFER_SIZE))  /* Right before TTB */
+#define TTB_BASE   ((unsigned long *)(0x30000000 + (32*1024*1024) - TTB_SIZE)) /* End of memory */
+#define FRAME   ((unsigned short *)((unsigned char *)TTB_BASE - LCD_BUFFER_SIZE))  /* Right before TTB */
 
 /* Memory Controllers */
 
-#define BWSCON (*(volatile int *)0x48000000) /* Bus width & wait status control */
-#define BANKCON0 (*(volatile int *)0x48000004) /* Boot ROM control */
-#define BANKCON1 (*(volatile int *)0x48000008) /* BANK1 control */
-#define BANKCON2 (*(volatile int *)0x4800000C) /* BANK2 control */
-#define BANKCON3 (*(volatile int *)0x48000010) /* BANK3 control */
-#define BANKCON4 (*(volatile int *)0x48000014) /* BANK4 control */
-#define BANKCON5 (*(volatile int *)0x48000018) /* BANK5 control */
-#define BANKCON6 (*(volatile int *)0x4800001C) /* BANK6 control */
-#define BANKCON7 (*(volatile int *)0x48000020) /* BANK7 control */
-#define REFRESH (*(volatile int *)0x48000024) /* DRAM/SDRAM refresh control */
-#define BANKSIZE (*(volatile int *)0x48000028) /* Flexible bank size */
-#define MRSRB6 (*(volatile int *)0x4800002C) /* Mode register set for SDRAM BANK6 */
-#define MRSRB7 (*(volatile int *)0x48000030) /* Mode register set for SDRAM BANK7 */
+#define BWSCON (*(volatile unsigned long *)0x48000000) /* Bus width & wait status control */
+#define BANKCON0 (*(volatile unsigned long *)0x48000004) /* Boot ROM control */
+#define BANKCON1 (*(volatile unsigned long *)0x48000008) /* BANK1 control */
+#define BANKCON2 (*(volatile unsigned long *)0x4800000C) /* BANK2 control */
+#define BANKCON3 (*(volatile unsigned long *)0x48000010) /* BANK3 control */
+#define BANKCON4 (*(volatile unsigned long *)0x48000014) /* BANK4 control */
+#define BANKCON5 (*(volatile unsigned long *)0x48000018) /* BANK5 control */
+#define BANKCON6 (*(volatile unsigned long *)0x4800001C) /* BANK6 control */
+#define BANKCON7 (*(volatile unsigned long *)0x48000020) /* BANK7 control */
+#define REFRESH (*(volatile unsigned long *)0x48000024) /* DRAM/SDRAM refresh control */
+#define BANKSIZE (*(volatile unsigned long *)0x48000028) /* Flexible bank size */
+#define MRSRB6 (*(volatile unsigned long *)0x4800002C) /* Mode register set for SDRAM BANK6 */
+#define MRSRB7 (*(volatile unsigned long *)0x48000030) /* Mode register set for SDRAM BANK7 */
 
 /* USB Host Controller */
 
 /* Control and status group */
-#define HcRevision (*(volatile int *)0x49000000)
-#define HcControl (*(volatile int *)0x49000004)
-#define HcCommonStatus (*(volatile int *)0x49000008)
-#define HcInterruptStatus (*(volatile int *)0x4900000C)
-#define HcInterruptEnable (*(volatile int *)0x49000010)
-#define HcInterruptDisable (*(volatile int *)0x49000014)
+#define HcRevision (*(volatile unsigned long *)0x49000000)
+#define HcControl (*(volatile unsigned long *)0x49000004)
+#define HcCommonStatus (*(volatile unsigned long *)0x49000008)
+#define HcInterruptStatus (*(volatile unsigned long *)0x4900000C)
+#define HcInterruptEnable (*(volatile unsigned long *)0x49000010)
+#define HcInterruptDisable (*(volatile unsigned long *)0x49000014)
 /* Memory pointer group */
-#define HcHCCA (*(volatile int *)0x49000018)
-#define HcPeriodCuttentED (*(volatile int *)0x4900001C)
-#define HcControlHeadED (*(volatile int *)0x49000020)
-#define HcControlCurrentED (*(volatile int *)0x49000024)
-#define HcBulkHeadED (*(volatile int *)0x49000028)
-#define HcBulkCurrentED (*(volatile int *)0x4900002C)
+#define HcHCCA (*(volatile unsigned long *)0x49000018)
+#define HcPeriodCuttentED (*(volatile unsigned long *)0x4900001C)
+#define HcControlHeadED (*(volatile unsigned long *)0x49000020)
+#define HcControlCurrentED (*(volatile unsigned long *)0x49000024)
+#define HcBulkHeadED (*(volatile unsigned long *)0x49000028)
+#define HcBulkCurrentED (*(volatile unsigned long *)0x4900002C)
 /* Frame counter group */
-#define HcDoneHead (*(volatile int *)0x49000030)
-#define HcRmInterval (*(volatile int *)0x49000034)
-#define HcFmRemaining (*(volatile int *)0x49000038)
-#define HcFmNumber (*(volatile int *)0x4900003C)
-#define HcPeriodicStart (*(volatile int *)0x49000040)
-#define HcLSThreshold (*(volatile int *)0x49000044)
+#define HcDoneHead (*(volatile unsigned long *)0x49000030)
+#define HcRmInterval (*(volatile unsigned long *)0x49000034)
+#define HcFmRemaining (*(volatile unsigned long *)0x49000038)
+#define HcFmNumber (*(volatile unsigned long *)0x4900003C)
+#define HcPeriodicStart (*(volatile unsigned long *)0x49000040)
+#define HcLSThreshold (*(volatile unsigned long *)0x49000044)
 /* Root hub group */
-#define HcRhDescriptorA (*(volatile int *)0x49000048)
-#define HcRhDescriptorB (*(volatile int *)0x4900004C)
-#define HcRhStatus (*(volatile int *)0x49000050)
-#define HcRhPortStatus1 (*(volatile int *)0x49000054)
-#define HcRhPortStatus2 (*(volatile int *)0x49000058)
+#define HcRhDescriptorA (*(volatile unsigned long *)0x49000048)
+#define HcRhDescriptorB (*(volatile unsigned long *)0x4900004C)
+#define HcRhStatus (*(volatile unsigned long *)0x49000050)
+#define HcRhPortStatus1 (*(volatile unsigned long *)0x49000054)
+#define HcRhPortStatus2 (*(volatile unsigned long *)0x49000058)
 
 /* Interrupt Controller */
 
-#define SRCPND (*(volatile int *)0x4A000000) /* Interrupt request status */
-#define INTMOD (*(volatile int *)0x4A000004) /* Interrupt mode control */
-#define INTMSK (*(volatile int *)0x4A000008) /* Interrupt mask control */
-#define PRIORITY (*(volatile int *)0x4A00000C) /* IRQ priority control */
-#define INTPND (*(volatile int *)0x4A000010) /* Interrupt request status */
-#define INTOFFSET (*(volatile int *)0x4A000014) /* Interrupt request source offset */
-#define SUBSRCPND (*(volatile int *)0x4A000018) /* Sub source pending */
-#define INTSUBMSK (*(volatile int *)0x4A00001C) /* Interrupt sub mask */
+#define SRCPND (*(volatile unsigned long *)0x4A000000) /* Interrupt request status */
+#define INTMOD (*(volatile unsigned long *)0x4A000004) /* Interrupt mode control */
+#define INTMSK (*(volatile unsigned long *)0x4A000008) /* Interrupt mask control */
+#define PRIORITY (*(volatile unsigned long *)0x4A00000C) /* IRQ priority control */
+#define INTPND (*(volatile unsigned long *)0x4A000010) /* Interrupt request status */
+#define INTOFFSET (*(volatile unsigned long *)0x4A000014) /* Interrupt request source offset */
+#define SUBSRCPND (*(volatile unsigned long *)0x4A000018) /* Sub source pending */
+#define INTSUBMSK (*(volatile unsigned long *)0x4A00001C) /* Interrupt sub mask */
 
 /* Interrupt indexes - INTOFFSET - IRQ mode only */
 /* Arbiter 5 => Arbiter 6 Req 5 */
@@ -166,376 +166,376 @@
 
 /* DMA */
 
-#define DISRC0 (*(volatile int *)0x4B000000) /* DMA 0 initial source */
-#define DISRCC0 (*(volatile int *)0x4B000004) /* DMA 0 initial source control */
-#define DIDST0 (*(volatile int *)0x4B000008) /* DMA 0 initial destination */
-#define DIDSTC0 (*(volatile int *)0x4B00000C) /* DMA 0 initial destination control */
-#define DCON0 (*(volatile int *)0x4B000010) /* DMA 0 control */
-#define DSTAT0 (*(volatile int *)0x4B000014) /* DMA 0 count */
-#define DCSRC0 (*(volatile int *)0x4B000018) /* DMA 0 current source */
-#define DCDST0 (*(volatile int *)0x4B00001C) /* DMA 0 current destination */
-#define DMASKTRIG0 (*(volatile int *)0x4B000020) /* DMA 0 mask trigger */
-#define DISRC1 (*(volatile int *)0x4B000040) /* DMA 1 initial source */
-#define DISRCC1 (*(volatile int *)0x4B000044) /* DMA 1 initial source control */
-#define DIDST1 (*(volatile int *)0x4B000048) /* DMA 1 initial destination */
-#define DIDSTC1 (*(volatile int *)0x4B00004C) /* DMA 1 initial destination control */
-#define DCON1 (*(volatile int *)0x4B000050) /* DMA 1 control */
-#define DSTAT1 (*(volatile int *)0x4B000054) /* DMA 1 count */
-#define DCSRC1 (*(volatile int *)0x4B000058) /* DMA 1 current source */
-#define DCDST1 (*(volatile int *)0x4B00005C) /* DMA 1 current destination */
-#define DMASKTRIG1 (*(volatile int *)0x4B000060) /* DMA 1 mask trigger */
-#define DISRC2 (*(volatile int *)0x4B000080) /* DMA 2 initial source */
-#define DISRCC2 (*(volatile int *)0x4B000084) /* DMA 2 initial source control */
-#define DIDST2 (*(volatile int *)0x4B000088) /* DMA 2 initial destination */
-#define DIDSTC2 (*(volatile int *)0x4B00008C) /* DMA 2 initial destination control */
-#define DCON2 (*(volatile int *)0x4B000090) /* DMA 2 control */
-#define DSTAT2 (*(volatile int *)0x4B000094) /* DMA 2 count */
-#define DCSRC2 (*(volatile int *)0x4B000098) /* DMA 2 current source */
-#define DCDST2 (*(volatile int *)0x4B00009C) /* DMA 2 current destination */
-#define DMASKTRIG2 (*(volatile int *)0x4B0000A0) /* DMA 2 mask trigger */
-#define DISRC3 (*(volatile int *)0x4B0000C0) /* DMA 3 initial source */
-#define DISRCC3 (*(volatile int *)0x4B0000C4) /* DMA 3 initial source control */
-#define DIDST3 (*(volatile int *)0x4B0000C8) /* DMA 3 initial destination */
-#define DIDSTC3 (*(volatile int *)0x4B0000CC) /* DMA 3 initial destination control */
-#define DCON3 (*(volatile int *)0x4B0000D0) /* DMA 3 control */
-#define DSTAT3 (*(volatile int *)0x4B0000D4) /* DMA 3 count */
-#define DCSRC3 (*(volatile int *)0x4B0000D8) /* DMA 3 current source */
-#define DCDST3 (*(volatile int *)0x4B0000DC) /* DMA 3 current destination */
-#define DMASKTRIG3 (*(volatile int *)0x4B0000E0) /* DMA 3 mask trigger */
+#define DISRC0 (*(volatile unsigned long *)0x4B000000) /* DMA 0 initial source */
+#define DISRCC0 (*(volatile unsigned long *)0x4B000004) /* DMA 0 initial source control */
+#define DIDST0 (*(volatile unsigned long *)0x4B000008) /* DMA 0 initial destination */
+#define DIDSTC0 (*(volatile unsigned long *)0x4B00000C) /* DMA 0 initial destination control */
+#define DCON0 (*(volatile unsigned long *)0x4B000010) /* DMA 0 control */
+#define DSTAT0 (*(volatile unsigned long *)0x4B000014) /* DMA 0 count */
+#define DCSRC0 (*(volatile unsigned long *)0x4B000018) /* DMA 0 current source */
+#define DCDST0 (*(volatile unsigned long *)0x4B00001C) /* DMA 0 current destination */
+#define DMASKTRIG0 (*(volatile unsigned long *)0x4B000020) /* DMA 0 mask trigger */
+#define DISRC1 (*(volatile unsigned long *)0x4B000040) /* DMA 1 initial source */
+#define DISRCC1 (*(volatile unsigned long *)0x4B000044) /* DMA 1 initial source control */
+#define DIDST1 (*(volatile unsigned long *)0x4B000048) /* DMA 1 initial destination */
+#define DIDSTC1 (*(volatile unsigned long *)0x4B00004C) /* DMA 1 initial destination control */
+#define DCON1 (*(volatile unsigned long *)0x4B000050) /* DMA 1 control */
+#define DSTAT1 (*(volatile unsigned long *)0x4B000054) /* DMA 1 count */
+#define DCSRC1 (*(volatile unsigned long *)0x4B000058) /* DMA 1 current source */
+#define DCDST1 (*(volatile unsigned long *)0x4B00005C) /* DMA 1 current destination */
+#define DMASKTRIG1 (*(volatile unsigned long *)0x4B000060) /* DMA 1 mask trigger */
+#define DISRC2 (*(volatile unsigned long *)0x4B000080) /* DMA 2 initial source */
+#define DISRCC2 (*(volatile unsigned long *)0x4B000084) /* DMA 2 initial source control */
+#define DIDST2 (*(volatile unsigned long *)0x4B000088) /* DMA 2 initial destination */
+#define DIDSTC2 (*(volatile unsigned long *)0x4B00008C) /* DMA 2 initial destination control */
+#define DCON2 (*(volatile unsigned long *)0x4B000090) /* DMA 2 control */
+#define DSTAT2 (*(volatile unsigned long *)0x4B000094) /* DMA 2 count */
+#define DCSRC2 (*(volatile unsigned long *)0x4B000098) /* DMA 2 current source */
+#define DCDST2 (*(volatile unsigned long *)0x4B00009C) /* DMA 2 current destination */
+#define DMASKTRIG2 (*(volatile unsigned long *)0x4B0000A0) /* DMA 2 mask trigger */
+#define DISRC3 (*(volatile unsigned long *)0x4B0000C0) /* DMA 3 initial source */
+#define DISRCC3 (*(volatile unsigned long *)0x4B0000C4) /* DMA 3 initial source control */
+#define DIDST3 (*(volatile unsigned long *)0x4B0000C8) /* DMA 3 initial destination */
+#define DIDSTC3 (*(volatile unsigned long *)0x4B0000CC) /* DMA 3 initial destination control */
+#define DCON3 (*(volatile unsigned long *)0x4B0000D0) /* DMA 3 control */
+#define DSTAT3 (*(volatile unsigned long *)0x4B0000D4) /* DMA 3 count */
+#define DCSRC3 (*(volatile unsigned long *)0x4B0000D8) /* DMA 3 current source */
+#define DCDST3 (*(volatile unsigned long *)0x4B0000DC) /* DMA 3 current destination */
+#define DMASKTRIG3 (*(volatile unsigned long *)0x4B0000E0) /* DMA 3 mask trigger */
 
 /* Clock & Power Management */
 
-#define LOCKTIME (*(volatile int *)0x4C000000) /* PLL lock time counter */
-#define MPLLCON (*(volatile int *)0x4C000004) /* MPLL control */
-#define UPLLCON (*(volatile int *)0x4C000008) /* UPLL control */
-#define CLKCON (*(volatile int *)0x4C00000C) /* Clock generator control */
-#define CLKSLOW (*(volatile int *)0x4C000010) /* Slow clock control */
-#define CLKDIVN (*(volatile int *)0x4C000014) /* Clock divider control */
-#define CAMDIVN (*(volatile int *)0x4C000018) /* Camera clock divider control */
+#define LOCKTIME (*(volatile unsigned long *)0x4C000000) /* PLL lock time counter */
+#define MPLLCON (*(volatile unsigned long *)0x4C000004) /* MPLL control */
+#define UPLLCON (*(volatile unsigned long *)0x4C000008) /* UPLL control */
+#define CLKCON (*(volatile unsigned long *)0x4C00000C) /* Clock generator control */
+#define CLKSLOW (*(volatile unsigned long *)0x4C000010) /* Slow clock control */
+#define CLKDIVN (*(volatile unsigned long *)0x4C000014) /* Clock divider control */
+#define CAMDIVN (*(volatile unsigned long *)0x4C000018) /* Camera clock divider control */
 
 /* LCD Controller */
 
-#define LCDCON1 (*(volatile int *)0x4D000000) /* LCD control 1 */
-#define LCDCON2 (*(volatile int *)0x4D000004) /* LCD control 2 */
-#define LCDCON3 (*(volatile int *)0x4D000008) /* LCD control 3 */
-#define LCDCON4 (*(volatile int *)0x4D00000C) /* LCD control 4 */
-#define LCDCON5 (*(volatile int *)0x4D000010) /* LCD control 5 */
-#define LCDSADDR1 (*(volatile int *)0x4D000014) /* STN/TFT: frame buffer start address 1 */
-#define LCDSADDR2 (*(volatile int *)0x4D000018) /* STN/TFT: frame buffer start address 2 */
-#define LCDSADDR3 (*(volatile int *)0x4D00001C) /* STN/TFT: virtual screen address set */
-#define REDLUT (*(volatile int *)0x4D000020) /* STN: red lookup table */
-#define GREENLUT (*(volatile int *)0x4D000024) /* STN: green lookup table */
-#define BLUELUT (*(volatile int *)0x4D000028) /* STN: blue lookup table */
-#define DITHMODE (*(volatile int *)0x4D00004C) /* STN: dithering mode */
-#define TPAL (*(volatile int *)0x4D000050) /* TFT: temporary palette */
-#define LCDINTPND (*(volatile int *)0x4D000054) /* LCD interrupt pending */
-#define LCDSRCPND (*(volatile int *)0x4D000058) /* LCD interrupt source */
-#define LCDINTMSK (*(volatile int *)0x4D00005C) /* LCD interrupt mask */
-#define TCONSEL (*(volatile int *)0x4D000060) /* TCON(LPC3600/LCC3600) control */
+#define LCDCON1 (*(volatile unsigned long *)0x4D000000) /* LCD control 1 */
+#define LCDCON2 (*(volatile unsigned long *)0x4D000004) /* LCD control 2 */
+#define LCDCON3 (*(volatile unsigned long *)0x4D000008) /* LCD control 3 */
+#define LCDCON4 (*(volatile unsigned long *)0x4D00000C) /* LCD control 4 */
+#define LCDCON5 (*(volatile unsigned long *)0x4D000010) /* LCD control 5 */
+#define LCDSADDR1 (*(volatile unsigned long *)0x4D000014) /* STN/TFT: frame buffer start address 1 */
+#define LCDSADDR2 (*(volatile unsigned long *)0x4D000018) /* STN/TFT: frame buffer start address 2 */
+#define LCDSADDR3 (*(volatile unsigned long *)0x4D00001C) /* STN/TFT: virtual screen address set */
+#define REDLUT (*(volatile unsigned long *)0x4D000020) /* STN: red lookup table */
+#define GREENLUT (*(volatile unsigned long *)0x4D000024) /* STN: green lookup table */
+#define BLUELUT (*(volatile unsigned long *)0x4D000028) /* STN: blue lookup table */
+#define DITHMODE (*(volatile unsigned long *)0x4D00004C) /* STN: dithering mode */
+#define TPAL (*(volatile unsigned long *)0x4D000050) /* TFT: temporary palette */
+#define LCDINTPND (*(volatile unsigned long *)0x4D000054) /* LCD interrupt pending */
+#define LCDSRCPND (*(volatile unsigned long *)0x4D000058) /* LCD interrupt source */
+#define LCDINTMSK (*(volatile unsigned long *)0x4D00005C) /* LCD interrupt mask */
+#define TCONSEL (*(volatile unsigned long *)0x4D000060) /* TCON(LPC3600/LCC3600) control */
 
 /* NAND Flash */
 
-#define NFCONF (*(volatile int *)0x4E000000) /* NAND flash configuration */
-#define NFCONT (*(volatile int *)0x4E000004) /* NAND flash control */
-#define NFCMD (*(volatile int *)0x4E000008) /* NAND flash command */
-#define NFADDR (*(volatile int *)0x4E00000C) /* NAND flash address */
-#define NFDATA (*(volatile int *)0x4E000010) /* NAND flash data */
-#define NFMECC0 (*(volatile int *)0x4E000014) /* NAND flash main area ECC0/1 */
-#define NFMECC1 (*(volatile int *)0x4E000018) /* NAND flash main area ECC2/3 */
-#define NFSECC (*(volatile int *)0x4E00001C) /* NAND flash spare area ECC */
-#define NFSTAT (*(volatile int *)0x4E000020) /* NAND flash operation status */
-#define NFESTAT0 (*(volatile int *)0x4E000024) /* NAND flash ECC status for I/O[7:0] */
-#define NFESTAT1 (*(volatile int *)0x4E000028) /* NAND flash ECC status for I/O[15:8] */
-#define NFMECCSTAT0 (*(volatile int *)0x4E00002C) /* NAND flash main area ECC0 status */
-#define NFMECCSTAT1 (*(volatile int *)0x4E000030) /* NAND flash main area ECC1 status */
-#define NFSECCSTAT (*(volatile int *)0x4E000034) /* NAND flash spare area ECC status */
-#define NFSBLK (*(volatile int *)0x4E000038) /* NAND flash start block address */
-#define NFEBLK (*(volatile int *)0x4E00003C) /* NAND flash end block address */
+#define NFCONF (*(volatile unsigned long *)0x4E000000) /* NAND flash configuration */
+#define NFCONT (*(volatile unsigned long *)0x4E000004) /* NAND flash control */
+#define NFCMD (*(volatile unsigned long *)0x4E000008) /* NAND flash command */
+#define NFADDR (*(volatile unsigned long *)0x4E00000C) /* NAND flash address */
+#define NFDATA (*(volatile unsigned long *)0x4E000010) /* NAND flash data */
+#define NFMECC0 (*(volatile unsigned long *)0x4E000014) /* NAND flash main area ECC0/1 */
+#define NFMECC1 (*(volatile unsigned long *)0x4E000018) /* NAND flash main area ECC2/3 */
+#define NFSECC (*(volatile unsigned long *)0x4E00001C) /* NAND flash spare area ECC */
+#define NFSTAT (*(volatile unsigned long *)0x4E000020) /* NAND flash operation status */
+#define NFESTAT0 (*(volatile unsigned long *)0x4E000024) /* NAND flash ECC status for I/O[7:0] */
+#define NFESTAT1 (*(volatile unsigned long *)0x4E000028) /* NAND flash ECC status for I/O[15:8] */
+#define NFMECCSTAT0 (*(volatile unsigned long *)0x4E00002C) /* NAND flash main area ECC0 status */
+#define NFMECCSTAT1 (*(volatile unsigned long *)0x4E000030) /* NAND flash main area ECC1 status */
+#define NFSECCSTAT (*(volatile unsigned long *)0x4E000034) /* NAND flash spare area ECC status */
+#define NFSBLK (*(volatile unsigned long *)0x4E000038) /* NAND flash start block address */
+#define NFEBLK (*(volatile unsigned long *)0x4E00003C) /* NAND flash end block address */
 
 /* Camera Interface */
 
-#define CISRCFMT (*(volatile int *)0x4F000000) /* Input source format */
-#define CIWDOFST (*(volatile int *)0x4F000004) /* Window offset register */
-#define CIGCTRL (*(volatile int *)0x4F000008) /* Global control register */
-#define CICOYSA1 (*(volatile int *)0x4F000018) /* Y 1st frame start address for codec DMA */
-#define CICOYSA2 (*(volatile int *)0x4F00001C) /* Y 2nd frame start address for codec DMA */
-#define CICOYSA3 (*(volatile int *)0x4F000020) /* Y 3nd frame start address for codec DMA */
-#define CICOYSA4 (*(volatile int *)0x4F000024) /* Y 4th frame start address for codec DMA */
-#define CICOCBSA1 (*(volatile int *)0x4F000028) /* Cb 1st frame start address for codec DMA */
-#define CICOCBSA2 (*(volatile int *)0x4F00002C) /* Cb 2nd frame start address for codec DMA */
-#define CICOCBSA3 (*(volatile int *)0x4F000030) /* Cb 3nd frame start address for codec DMA */
-#define CICOCBSA4 (*(volatile int *)0x4F000034) /* Cb 4th frame start address for codec DMA */
-#define CICOCRSA1 (*(volatile int *)0x4F000038) /* Cr 1st frame start address for codec DMA */
-#define CICOCRSA2 (*(volatile int *)0x4F00003C) /* Cr 2nd frame start address for codec DMA */
-#define CICOCRSA3 (*(volatile int *)0x4F000040) /* Cr 3nd frame start address for codec DMA */
-#define CICOCRSA4 (*(volatile int *)0x4F000044) /* Cr 4th frame start address for codec DMA */
-#define CICOTRGFMT (*(volatile int *)0x4F000048) /* Target image format of codec DMA */
-#define CICOCTRL (*(volatile int *)0x4F00004C
+#define CISRCFMT (*(volatile unsigned long *)0x4F000000) /* Input source format */
+#define CIWDOFST (*(volatile unsigned long *)0x4F000004) /* Window offset register */
+#define CIGCTRL (*(volatile unsigned long *)0x4F000008) /* Global control register */
+#define CICOYSA1 (*(volatile unsigned long *)0x4F000018) /* Y 1st frame start address for codec DMA */
+#define CICOYSA2 (*(volatile unsigned long *)0x4F00001C) /* Y 2nd frame start address for codec DMA */
+#define CICOYSA3 (*(volatile unsigned long *)0x4F000020) /* Y 3nd frame start address for codec DMA */
+#define CICOYSA4 (*(volatile unsigned long *)0x4F000024) /* Y 4th frame start address for codec DMA */
+#define CICOCBSA1 (*(volatile unsigned long *)0x4F000028) /* Cb 1st frame start address for codec DMA */
+#define CICOCBSA2 (*(volatile unsigned long *)0x4F00002C) /* Cb 2nd frame start address for codec DMA */
+#define CICOCBSA3 (*(volatile unsigned long *)0x4F000030) /* Cb 3nd frame start address for codec DMA */
+#define CICOCBSA4 (*(volatile unsigned long *)0x4F000034) /* Cb 4th frame start address for codec DMA */
+#define CICOCRSA1 (*(volatile unsigned long *)0x4F000038) /* Cr 1st frame start address for codec DMA */
+#define CICOCRSA2 (*(volatile unsigned long *)0x4F00003C) /* Cr 2nd frame start address for codec DMA */
+#define CICOCRSA3 (*(volatile unsigned long *)0x4F000040) /* Cr 3nd frame start address for codec DMA */
+#define CICOCRSA4 (*(volatile unsigned long *)0x4F000044) /* Cr 4th frame start address for codec DMA */
+#define CICOTRGFMT (*(volatile unsigned long *)0x4F000048) /* Target image format of codec DMA */
+#define CICOCTRL (*(volatile unsigned long *)0x4F00004C)
 
 /* Codec DMA control related */
 
-#define CICOSCPRERATIO (*(volatile int *)0x4F000050) /* Codec pre-scaler ratio control */
-#define CICOSCPREDST (*(volatile int *)0x4F000054) /* Codec pre-scaler destination format */
-#define CICOSCCTRL (*(volatile int *)0x4F000058) /* Codec main-scaler control */
-#define CICOTAREA (*(volatile int *)0x4F00005C) /* Codec scaler target area */
-#define CICOSTATUS (*(volatile int *)0x4F000064) /* Codec path status */
-#define CIPRCLRSA1 (*(volatile int *)0x4F00006C) /* RGB 1st frame start address for preview DMA */
-#define CIPRCLRSA2 (*(volatile int *)0x4F000070) /* RGB 2nd frame start address for preview DMA */
-#define CIPRCLRSA3 (*(volatile int *)0x4F000074) /* RGB 3nd frame start address for preview DMA */
-#define CIPRCLRSA4 (*(volatile int *)0x4F000078) /* RGB 4th frame start address for preview DMA */
-#define CIPRTRGFMT (*(volatile int *)0x4F00007C) /* Target image format of preview DMA */
-#define CIPRCTRL (*(volatile int *)0x4F000080) /* Preview DMA control related */
-#define CIPRSCPRERATIO (*(volatile int *)0x4F000084) /* Preview pre-scaler ratio control */
-#define CIPRSCPREDST (*(volatile int *)0x4F000088) /* Preview pre-scaler destination format */
-#define CIPRSCCTRL (*(volatile int *)0x4F00008C) /* Preview main-scaler control */
-#define CIPRTAREA (*(volatile int *)0x4F000090) /* Preview scaler target area */
-#define CIPRSTATUS (*(volatile int *)0x4F000098) /* Preview path status */
-#define CIIMGCPT (*(volatile int *)0x4F0000A0) /* Image capture enable command */
+#define CICOSCPRERATIO (*(volatile unsigned long *)0x4F000050) /* Codec pre-scaler ratio control */
+#define CICOSCPREDST (*(volatile unsigned long *)0x4F000054) /* Codec pre-scaler destination format */
+#define CICOSCCTRL (*(volatile unsigned long *)0x4F000058) /* Codec main-scaler control */
+#define CICOTAREA (*(volatile unsigned long *)0x4F00005C) /* Codec scaler target area */
+#define CICOSTATUS (*(volatile unsigned long *)0x4F000064) /* Codec path status */
+#define CIPRCLRSA1 (*(volatile unsigned long *)0x4F00006C) /* RGB 1st frame start address for preview DMA */
+#define CIPRCLRSA2 (*(volatile unsigned long *)0x4F000070) /* RGB 2nd frame start address for preview DMA */
+#define CIPRCLRSA3 (*(volatile unsigned long *)0x4F000074) /* RGB 3nd frame start address for preview DMA */
+#define CIPRCLRSA4 (*(volatile unsigned long *)0x4F000078) /* RGB 4th frame start address for preview DMA */
+#define CIPRTRGFMT (*(volatile unsigned long *)0x4F00007C) /* Target image format of preview DMA */
+#define CIPRCTRL (*(volatile unsigned long *)0x4F000080) /* Preview DMA control related */
+#define CIPRSCPRERATIO (*(volatile unsigned long *)0x4F000084) /* Preview pre-scaler ratio control */
+#define CIPRSCPREDST (*(volatile unsigned long *)0x4F000088) /* Preview pre-scaler destination format */
+#define CIPRSCCTRL (*(volatile unsigned long *)0x4F00008C) /* Preview main-scaler control */
+#define CIPRTAREA (*(volatile unsigned long *)0x4F000090) /* Preview scaler target area */
+#define CIPRSTATUS (*(volatile unsigned long *)0x4F000098) /* Preview path status */
+#define CIIMGCPT (*(volatile unsigned long *)0x4F0000A0) /* Image capture enable command */
 
 /* UART */
 
-#define ULCON0 (*(volatile int *)0x50000000) /* UART 0 line control */
-#define UCON0 (*(volatile int *)0x50000004) /* UART 0 control */
-#define UFCON0 (*(volatile int *)0x50000008) /* UART 0 FIFO control */
-#define UMCON0 (*(volatile int *)0x5000000C) /* UART 0 modem control */
-#define UTRSTAT0 (*(volatile int *)0x50000010) /* UART 0 Tx/Rx status */
-#define UERSTAT0 (*(volatile int *)0x50000014) /* UART 0 Rx error status */
-#define UFSTAT0 (*(volatile int *)0x50000018) /* UART 0 FIFO status */
-#define UMSTAT0 (*(volatile int *)0x5000001C) /* UART 0 modem status */
-#define UTXH0 (*(volatile char *)0x50000020) /* UART 0 transmission hold */
-#define URXH0 (*(volatile char *)0x50000024) /* UART 0 receive buffer */
-#define UBRDIV0 (*(volatile int *)0x50000028) /* UART 0 baud rate divisor */
-#define ULCON1 (*(volatile int *)0x50004000) /* UART 1 line control */
-#define UCON1 (*(volatile int *)0x50004004) /* UART 1 control */
-#define UFCON1 (*(volatile int *)0x50004008) /* UART 1 FIFO control */
-#define UMCON1 (*(volatile int *)0x5000400C) /* UART 1 modem control */
-#define UTRSTAT1 (*(volatile int *)0x50004010) /* UART 1 Tx/Rx status */
-#define UERSTAT1 (*(volatile int *)0x50004014) /* UART 1 Rx error status */
-#define UFSTAT1 (*(volatile int *)0x50004018) /* UART 1 FIFO status */
-#define UMSTAT1 (*(volatile int *)0x5000401C) /* UART 1 modem status */
-#define UTXH1 (*(volatile char*)0x50004020) /* UART 1 transmission hold */
-#define URXH1 (*(volatile char*)0x50004024) /* UART 1 receive buffer */
-#define UBRDIV1 (*(volatile int *)0x50004028) /* UART 1 baud rate divisor */
-#define ULCON2 (*(volatile int *)0x50008000) /* UART 2 line control */
-#define UCON2 (*(volatile int *)0x50008004) /* UART 2 control */
-#define UFCON2 (*(volatile int *)0x50008008) /* UART 2 FIFO control */
-#define UTRSTAT2 (*(volatile int *)0x50008010) /* UART 2 Tx/Rx status */
-#define UERSTAT2 (*(volatile int *)0x50008014) /* UART 2 Rx error status */
-#define UFSTAT2 (*(volatile int *)0x50008018) /* UART 2 FIFO status */
-#define UTXH2 (*(volatile char*)0x50008020) /* UART 2 transmission hold */
-#define URXH2 (*(volatile char*)0x50008024) /* UART 2 receive buffer */
-#define UBRDIV2 (*(volatile int *)0x50008028) /* UART 2 baud rate divisor */
+#define ULCON0 (*(volatile unsigned long *)0x50000000) /* UART 0 line control */
+#define UCON0 (*(volatile unsigned long *)0x50000004) /* UART 0 control */
+#define UFCON0 (*(volatile unsigned long *)0x50000008) /* UART 0 FIFO control */
+#define UMCON0 (*(volatile unsigned long *)0x5000000C) /* UART 0 modem control */
+#define UTRSTAT0 (*(volatile unsigned long *)0x50000010) /* UART 0 Tx/Rx status */
+#define UERSTAT0 (*(volatile unsigned long *)0x50000014) /* UART 0 Rx error status */
+#define UFSTAT0 (*(volatile unsigned long *)0x50000018) /* UART 0 FIFO status */
+#define UMSTAT0 (*(volatile unsigned long *)0x5000001C) /* UART 0 modem status */
+#define UTXH0 (*(volatile unsigned char *)0x50000020) /* UART 0 transmission hold */
+#define URXH0 (*(volatile unsigned char *)0x50000024) /* UART 0 receive buffer */
+#define UBRDIV0 (*(volatile unsigned long *)0x50000028) /* UART 0 baud rate divisor */
+#define ULCON1 (*(volatile unsigned long *)0x50004000) /* UART 1 line control */
+#define UCON1 (*(volatile unsigned long *)0x50004004) /* UART 1 control */
+#define UFCON1 (*(volatile unsigned long *)0x50004008) /* UART 1 FIFO control */
+#define UMCON1 (*(volatile unsigned long *)0x5000400C) /* UART 1 modem control */
+#define UTRSTAT1 (*(volatile unsigned long *)0x50004010) /* UART 1 Tx/Rx status */
+#define UERSTAT1 (*(volatile unsigned long *)0x50004014) /* UART 1 Rx error status */
+#define UFSTAT1 (*(volatile unsigned long *)0x50004018) /* UART 1 FIFO status */
+#define UMSTAT1 (*(volatile unsigned long *)0x5000401C) /* UART 1 modem status */
+#define UTXH1 (*(volatile unsigned char*)0x50004020) /* UART 1 transmission hold */
+#define URXH1 (*(volatile unsigned char*)0x50004024) /* UART 1 receive buffer */
+#define UBRDIV1 (*(volatile unsigned long *)0x50004028) /* UART 1 baud rate divisor */
+#define ULCON2 (*(volatile unsigned long *)0x50008000) /* UART 2 line control */
+#define UCON2 (*(volatile unsigned long *)0x50008004) /* UART 2 control */
+#define UFCON2 (*(volatile unsigned long *)0x50008008) /* UART 2 FIFO control */
+#define UTRSTAT2 (*(volatile unsigned long *)0x50008010) /* UART 2 Tx/Rx status */
+#define UERSTAT2 (*(volatile unsigned long *)0x50008014) /* UART 2 Rx error status */
+#define UFSTAT2 (*(volatile unsigned long *)0x50008018) /* UART 2 FIFO status */
+#define UTXH2 (*(volatile unsigned char*)0x50008020) /* UART 2 transmission hold */
+#define URXH2 (*(volatile unsigned char*)0x50008024) /* UART 2 receive buffer */
+#define UBRDIV2 (*(volatile unsigned long *)0x50008028) /* UART 2 baud rate divisor */
 
 /* PWM Timer */
 
-#define TCFG0 (*(volatile int *)0x51000000) /* Timer configuration */
-#define TCFG1 (*(volatile int *)0x51000004) /* Timer configuration */
-#define TCON (*(volatile int *)0x51000008) /* Timer control */
-#define TCNTB0 (*(volatile int *)0x5100000C) /* Timer count buffer 0 */
-#define TCMPB0 (*(volatile int *)0x51000010) /* Timer compare buffer 0 */
-#define TCNTO0 (*(volatile int *)0x51000014) /* Timer count observation 0 */
-#define TCNTB1 (*(volatile int *)0x51000018) /* Timer count buffer 1 */
-#define TCMPB1 (*(volatile int *)0x5100001C) /* Timer compare buffer 1 */
-#define TCNTO1 (*(volatile int *)0x51000020) /* Timer count observation 1 */
-#define TCNTB2 (*(volatile int *)0x51000024) /* Timer count buffer 2 */
-#define TCMPB2 (*(volatile int *)0x51000028) /* Timer compare buffer 2 */
-#define TCNTO2 (*(volatile int *)0x5100002C) /* Timer count observation 2 */
-#define TCNTB3 (*(volatile int *)0x51000030) /* Timer count buffer 3 */
-#define TCMPB3 (*(volatile int *)0x51000034) /* Timer compare buffer 3 */
-#define TCNTO3 (*(volatile int *)0x51000038) /* Timer count observation 3 */
-#define TCNTB4 (*(volatile int *)0x5100003C) /* Timer count buffer 4 */
-#define TCNTO4 (*(volatile int *)0x51000040) /* Timer count observation 4 */
+#define TCFG0 (*(volatile unsigned long *)0x51000000) /* Timer configuration */
+#define TCFG1 (*(volatile unsigned long *)0x51000004) /* Timer configuration */
+#define TCON (*(volatile unsigned long *)0x51000008) /* Timer control */
+#define TCNTB0 (*(volatile unsigned long *)0x5100000C) /* Timer count buffer 0 */
+#define TCMPB0 (*(volatile unsigned long *)0x51000010) /* Timer compare buffer 0 */
+#define TCNTO0 (*(volatile unsigned long *)0x51000014) /* Timer count observation 0 */
+#define TCNTB1 (*(volatile unsigned long *)0x51000018) /* Timer count buffer 1 */
+#define TCMPB1 (*(volatile unsigned long *)0x5100001C) /* Timer compare buffer 1 */
+#define TCNTO1 (*(volatile unsigned long *)0x51000020) /* Timer count observation 1 */
+#define TCNTB2 (*(volatile unsigned long *)0x51000024) /* Timer count buffer 2 */
+#define TCMPB2 (*(volatile unsigned long *)0x51000028) /* Timer compare buffer 2 */
+#define TCNTO2 (*(volatile unsigned long *)0x5100002C) /* Timer count observation 2 */
+#define TCNTB3 (*(volatile unsigned long *)0x51000030) /* Timer count buffer 3 */
+#define TCMPB3 (*(volatile unsigned long *)0x51000034) /* Timer compare buffer 3 */
+#define TCNTO3 (*(volatile unsigned long *)0x51000038) /* Timer count observation 3 */
+#define TCNTB4 (*(volatile unsigned long *)0x5100003C) /* Timer count buffer 4 */
+#define TCNTO4 (*(volatile unsigned long *)0x51000040) /* Timer count observation 4 */
 
 /* USB Device */
 
-#define FUNC_ADDR_REG (*(volatile char *)0x52000140) /* Function address */
-#define PWR_REG (*(volatile char *)0x52000144) /* Power management */
-#define EP_INT_REG (*(volatile char *)0x52000148) /* EP interrupt pending and clear */
-#define USB_INT_REG (*(volatile char *)0x52000158) /* USB interrupt pending and clear */
-#define EP_INT_EN_REG (*(volatile char *)0x5200015C) /* Interrupt enable */
-#define USB_INT_EN_REG (*(volatile char *)0x5200016C) /* Interrupt enable */
-#define FRAME_NUM1_REG (*(volatile char *)0x52000170) /* Frame number lower byte */
-#define FRAME_NUM2_REG (*(volatile char *)0x52000174) /* Frame number higher byte */
-#define INDEX_REG (*(volatile char *)0x52000178) /* Register index */
-#define EP0_CSR (*(volatile char *)0x52000184) /* Endpoint 0 status */
-#define IN_CSR1_REG (*(volatile char *)0x52000184) /* In endpoint control status */
-#define IN_CSR2_REG (*(volatile char *)0x52000188) /* In endpoint control status */
-#define MAXP_REG (*(volatile char *)0x52000180) /* Endpoint max packet */
-#define OUT_CSR1_REG (*(volatile char *)0x52000190) /* Out endpoint control status */
-#define OUT_CSR2_REG (*(volatile char *)0x52000194) /* Out endpoint control status */
-#define OUT_FIFO_CNT1_REG (*(volatile char *)0x52000198) /* Endpoint out write count */
-#define OUT_FIFO_CNT2_REG (*(volatile char *)0x5200019C) /* Endpoint out write count */
-#define EP0_FIFO (*(volatile char *)0x520001C0) /* Endpoint 0 FIFO */
-#define EP1_FIFO (*(volatile char *)0x520001C4) /* Endpoint 1 FIFO */
-#define EP2_FIFO (*(volatile char *)0x520001C8) /* Endpoint 2 FIFO */
-#define EP3_FIFO (*(volatile char *)0x520001CC) /* Endpoint 3 FIFO */
-#define EP4_FIFO (*(volatile char *)0x520001D0) /* Endpoint 4 FIFO */
-#define EP1_DMA_CON (*(volatile char *)0x52000200) /* EP1 DMA Interface control */
-#define EP1_DMA_UNIT (*(volatile char *)0x52000204) /* EP1 DMA Tx unit counter */
-#define EP1_DMA_FIFO (*(volatile char *)0x52000208) /* EP1 DMA Tx FIFO counter */
-#define EP1_DMA_TTC_L (*(volatile char *)0x5200020C) /* EP1 DMA Total Tx counter */
-#define EP1_DMA_TTC_M (*(volatile char *)0x52000210) /* EP1 DMA Total Tx counter */
-#define EP1_DMA_TTC_H (*(volatile char *)0x52000214) /* EP1 DMA Total Tx counter */
-#define EP2_DMA_CON (*(volatile char *)0x52000218) /* EP2 DMA interface control */
-#define EP2_DMA_UNIT (*(volatile char *)0x5200021C) /* EP2 DMA Tx Unit counter */
-#define EP2_DMA_FIFO (*(volatile char *)0x52000220) /* EP2 DMA Tx FIFO counter */
-#define EP2_DMA_TTC_L (*(volatile char *)0x52000224) /* EP2 DMA total Tx counter */
-#define EP2_DMA_TTC_M (*(volatile char *)0x52000228) /* EP2 DMA total Tx counter */
-#define EP2_DMA_TTC_H (*(volatile char *)0x5200022C) /* EP2 DMA Total Tx counter */
-#define EP3_DMA_CON (*(volatile char *)0x52000240) /* EP3 DMA Interface control */
-#define EP3_DMA_UNIT (*(volatile char *)0x52000244) /* EP3 DMA Tx Unit counter */
-#define EP3_DMA_FIFO (*(volatile char *)0x52000248) /* EP3 DMA Tx FIFO counter */
-#define EP3_DMA_TTC_L (*(volatile char *)0x5200024C) /* EP3 DMA Total Tx counter */
-#define EP3_DMA_TTC_M (*(volatile char *)0x52000250) /* EP3 DMA Total Tx counter */
-#define EP3_DMA_TTC_H (*(volatile char *)0x52000254) /* EP3 DMA Total Tx counter */
-#define EP4_DMA_CON (*(volatile char *)0x52000258) /* EP4 DMA Interface control */
-#define EP4_DMA_UNIT (*(volatile char *)0x5200025C) /* EP4 DMA Tx Unit counter */
-#define EP4_DMA_FIFO (*(volatile char *)0x52000260) /* EP4 DMA Tx FIFO counter */
-#define EP4_DMA_TTC_L (*(volatile char *)0x52000264) /* EP4 DMA Total Tx counter */
-#define EP4_DMA_TTC_M (*(volatile char *)0x52000268) /* EP4 DMA Total Tx counter */
-#define EP4_DMA_TTC_H (*(volatile char *)0x5200026C) /* EP4 DMA Total Tx counter */
+#define FUNC_ADDR_REG (*(volatile unsigned char *)0x52000140) /* Function address */
+#define PWR_REG (*(volatile unsigned char *)0x52000144) /* Power management */
+#define EP_INT_REG (*(volatile unsigned char *)0x52000148) /* EP interrupt pending and clear */
+#define USB_INT_REG (*(volatile unsigned char *)0x52000158) /* USB interrupt pending and clear */
+#define EP_INT_EN_REG (*(volatile unsigned char *)0x5200015C) /* Interrupt enable */
+#define USB_INT_EN_REG (*(volatile unsigned char *)0x5200016C) /* Interrupt enable */
+#define FRAME_NUM1_REG (*(volatile unsigned char *)0x52000170) /* Frame number lower byte */
+#define FRAME_NUM2_REG (*(volatile unsigned char *)0x52000174) /* Frame number higher byte */
+#define INDEX_REG (*(volatile unsigned char *)0x52000178) /* Register index */
+#define EP0_CSR (*(volatile unsigned char *)0x52000184) /* Endpoint 0 status */
+#define IN_CSR1_REG (*(volatile unsigned char *)0x52000184) /* In endpoint control status */
+#define IN_CSR2_REG (*(volatile unsigned char *)0x52000188) /* In endpoint control status */
+#define MAXP_REG (*(volatile unsigned char *)0x52000180) /* Endpoint max packet */
+#define OUT_CSR1_REG (*(volatile unsigned char *)0x52000190) /* Out endpoint control status */
+#define OUT_CSR2_REG (*(volatile unsigned char *)0x52000194) /* Out endpoint control status */
+#define OUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x52000198) /* Endpoint out write count */
+#define OUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019C) /* Endpoint out write count */
+#define EP0_FIFO (*(volatile unsigned char *)0x520001C0) /* Endpoint 0 FIFO */
+#define EP1_FIFO (*(volatile unsigned char *)0x520001C4) /* Endpoint 1 FIFO */
+#define EP2_FIFO (*(volatile unsigned char *)0x520001C8) /* Endpoint 2 FIFO */
+#define EP3_FIFO (*(volatile unsigned char *)0x520001CC) /* Endpoint 3 FIFO */
+#define EP4_FIFO (*(volatile unsigned char *)0x520001D0) /* Endpoint 4 FIFO */
+#define EP1_DMA_CON (*(volatile unsigned char *)0x52000200) /* EP1 DMA Interface control */
+#define EP1_DMA_UNIT (*(volatile unsigned char *)0x52000204) /* EP1 DMA Tx unit counter */
+#define EP1_DMA_FIFO (*(volatile unsigned char *)0x52000208) /* EP1 DMA Tx FIFO counter */
+#define EP1_DMA_TTC_L (*(volatile unsigned char *)0x5200020C) /* EP1 DMA Total Tx counter */
+#define EP1_DMA_TTC_M (*(volatile unsigned char *)0x52000210) /* EP1 DMA Total Tx counter */
+#define EP1_DMA_TTC_H (*(volatile unsigned char *)0x52000214) /* EP1 DMA Total Tx counter */
+#define EP2_DMA_CON (*(volatile unsigned char *)0x52000218) /* EP2 DMA interface control */
+#define EP2_DMA_UNIT (*(volatile unsigned char *)0x5200021C) /* EP2 DMA Tx Unit counter */
+#define EP2_DMA_FIFO (*(volatile unsigned char *)0x52000220) /* EP2 DMA Tx FIFO counter */
+#define EP2_DMA_TTC_L (*(volatile unsigned char *)0x52000224) /* EP2 DMA total Tx counter */
+#define EP2_DMA_TTC_M (*(volatile unsigned char *)0x52000228) /* EP2 DMA total Tx counter */
+#define EP2_DMA_TTC_H (*(volatile unsigned char *)0x5200022C) /* EP2 DMA Total Tx counter */
+#define EP3_DMA_CON (*(volatile unsigned char *)0x52000240) /* EP3 DMA Interface control */
+#define EP3_DMA_UNIT (*(volatile unsigned char *)0x52000244) /* EP3 DMA Tx Unit counter */
+#define EP3_DMA_FIFO (*(volatile unsigned char *)0x52000248) /* EP3 DMA Tx FIFO counter */
+#define EP3_DMA_TTC_L (*(volatile unsigned char *)0x5200024C) /* EP3 DMA Total Tx counter */
+#define EP3_DMA_TTC_M (*(volatile unsigned char *)0x52000250) /* EP3 DMA Total Tx counter */
+#define EP3_DMA_TTC_H (*(volatile unsigned char *)0x52000254) /* EP3 DMA Total Tx counter */
+#define EP4_DMA_CON (*(volatile unsigned char *)0x52000258) /* EP4 DMA Interface control */
+#define EP4_DMA_UNIT (*(volatile unsigned char *)0x5200025C) /* EP4 DMA Tx Unit counter */
+#define EP4_DMA_FIFO (*(volatile unsigned char *)0x52000260) /* EP4 DMA Tx FIFO counter */
+#define EP4_DMA_TTC_L (*(volatile unsigned char *)0x52000264) /* EP4 DMA Total Tx counter */
+#define EP4_DMA_TTC_M (*(volatile unsigned char *)0x52000268) /* EP4 DMA Total Tx counter */
+#define EP4_DMA_TTC_H (*(volatile unsigned char *)0x5200026C) /* EP4 DMA Total Tx counter */
 
 /* Watchdog Timer */
 
-#define WTCON (*(volatile int *)0x53000000) /* Watchdog timer mode */
-#define WTDAT (*(volatile int *)0x53000004) /* Watchdog timer data */
-#define WTCNT (*(volatile int *)0x53000008) /* Watchdog timer count */
+#define WTCON (*(volatile unsigned long *)0x53000000) /* Watchdog timer mode */
+#define WTDAT (*(volatile unsigned long *)0x53000004) /* Watchdog timer data */
+#define WTCNT (*(volatile unsigned long *)0x53000008) /* Watchdog timer count */
 
 /* IIC */
 
-#define IICCON (*(volatile int *)0x54000000) /* IIC control  */
-#define IICSTAT (*(volatile int *)0x54000004) /* IIC status */
-#define IICADD (*(volatile int *)0x54000008) /* IIC address */
-#define IICDS (*(volatile int *)0x5400000C) /* IIC data shift */
-#define IICLC (*(volatile int *)0x54000010) /* IIC multi-master line control */
+#define IICCON (*(volatile unsigned long *)0x54000000) /* IIC control  */
+#define IICSTAT (*(volatile unsigned long *)0x54000004) /* IIC status */
+#define IICADD (*(volatile unsigned long *)0x54000008) /* IIC address */
+#define IICDS (*(volatile unsigned long *)0x5400000C) /* IIC data shift */
+#define IICLC (*(volatile unsigned long *)0x54000010) /* IIC multi-master line control */
 
 /* IIS */
 
-#define IISCON (*(volatile int *)0x55000000) /* IIS control */
-#define IISMOD (*(volatile int *)0x55000004) /* IIS mode */
-#define IISPSR (*(volatile int *)0x55000008) /* IIS prescaler */
-#define IISFCON (*(volatile int *)0x5500000C) /* IIS FIFO control */
-#define IISFIFO (*(volatile short *)0x55000010) /* IIS FIFO entry */
+#define IISCON (*(volatile unsigned long *)0x55000000) /* IIS control */
+#define IISMOD (*(volatile unsigned long *)0x55000004) /* IIS mode */
+#define IISPSR (*(volatile unsigned long *)0x55000008) /* IIS prescaler */
+#define IISFCON (*(volatile unsigned long *)0x5500000C) /* IIS FIFO control */
+#define IISFIFO (*(volatile unsigned short *)0x55000010) /* IIS FIFO entry */
 
 /* I/O port */
 
-#define GPACON (*(volatile int *)0x56000000) /* Port A control */
-#define GPADAT (*(volatile int *)0x56000004) /* Port A data */
-#define GPBCON (*(volatile int *)0x56000010) /* Port B control */
-#define GPBDAT (*(volatile int *)0x56000014) /* Port B data */
-#define GPBUP (*(volatile int *)0x56000018) /* Pull-up control B */
-#define GPCCON (*(volatile int *)0x56000020) /* Port C control */
-#define GPCDAT (*(volatile int *)0x56000024) /* Port C data */
-#define GPCUP (*(volatile int *)0x56000028) /* Pull-up control C */
-#define GPDCON (*(volatile int *)0x56000030) /* Port D control */
-#define GPDDAT (*(volatile int *)0x56000034) /* Port D data */
-#define GPDUP (*(volatile int *)0x56000038) /* Pull-up control D */
-#define GPECON (*(volatile int *)0x56000040) /* Port E control */
-#define GPEDAT (*(volatile int *)0x56000044) /* Port E data */
-#define GPEUP (*(volatile int *)0x56000048) /* Pull-up control E */
-#define GPFCON (*(volatile int *)0x56000050) /* Port F control */
-#define GPFDAT (*(volatile int *)0x56000054) /* Port F data */
-#define GPFUP (*(volatile int *)0x56000058) /* Pull-up control F */
-#define GPGCON (*(volatile int *)0x56000060) /* Port G control */
-#define GPGDAT (*(volatile int *)0x56000064) /* Port G data */
-#define GPGUP (*(volatile int *)0x56000068) /* Pull-up control G */
-#define GPHCON (*(volatile int *)0x56000070) /* Port H control */
-#define GPHDAT (*(volatile int *)0x56000074) /* Port H data */
-#define GPHUP (*(volatile int *)0x56000078) /* Pull-up control H */
-#define MISCCR (*(volatile int *)0x56000080) /* Miscellaneous control */
-#define DCLKCON (*(volatile int *)0x56000084) /* DCLK0/1 control */
-#define EXTINT0 (*(volatile int *)0x56000088) /* External interrupt control register 0 */
-#define EXTINT1 (*(volatile int *)0x5600008C) /* External interrupt control register 1 */
-#define EXTINT2 (*(volatile int *)0x56000090) /* External interrupt control register 2 */
-#define EINTFLT0 (*(volatile int *)0x56000094) /* Reserved */
-#define EINTFLT1 (*(volatile int *)0x56000098) /* Reserved */
-#define EINTFLT2 (*(volatile int *)0x5600009C) /* External interrupt filter control register 2 */
-#define EINTFLT3 (*(volatile int *)0x560000A0) /* External interrupt filter control register 3 */
-#define EINTMASK (*(volatile int *)0x560000A4) /* External interrupt mask */
-#define EINTPEND (*(volatile int *)0x560000A8) /* External interrupt pending */
-#define GSTATUS0 (*(volatile int *)0x560000AC) /* External pin status */
-#define GSTATUS1 (*(volatile int *)0x560000B0) /* Chip ID */
-#define GSTATUS2 (*(volatile int *)0x560000B4) /* Reset status */
-#define GSTATUS3 (*(volatile int *)0x560000B8) /* Inform register */
-#define GSTATUS4 (*(volatile int *)0x560000BC) /* Inform register */
-#define MSLCON (*(volatile int *)0x560000CC) /* Memory sleep control register */
-#define GPJCON (*(volatile int *)0x560000D0) /* Port J control */
-#define GPJDAT (*(volatile int *)0x560000D4) /* Port J data */
-#define GPJUP (*(volatile int *)0x560000D8) /* Pull-up control J */
+#define GPACON (*(volatile unsigned long *)0x56000000) /* Port A control */
+#define GPADAT (*(volatile unsigned long *)0x56000004) /* Port A data */
+#define GPBCON (*(volatile unsigned long *)0x56000010) /* Port B control */
+#define GPBDAT (*(volatile unsigned long *)0x56000014) /* Port B data */
+#define GPBUP (*(volatile unsigned long *)0x56000018) /* Pull-up control B */
+#define GPCCON (*(volatile unsigned long *)0x56000020) /* Port C control */
+#define GPCDAT (*(volatile unsigned long *)0x56000024) /* Port C data */
+#define GPCUP (*(volatile unsigned long *)0x56000028) /* Pull-up control C */
+#define GPDCON (*(volatile unsigned long *)0x56000030) /* Port D control */
+#define GPDDAT (*(volatile unsigned long *)0x56000034) /* Port D data */
+#define GPDUP (*(volatile unsigned long *)0x56000038) /* Pull-up control D */
+#define GPECON (*(volatile unsigned long *)0x56000040) /* Port E control */
+#define GPEDAT (*(volatile unsigned long *)0x56000044) /* Port E data */
+#define GPEUP (*(volatile unsigned long *)0x56000048) /* Pull-up control E */
+#define GPFCON (*(volatile unsigned long *)0x56000050) /* Port F control */
+#define GPFDAT (*(volatile unsigned long *)0x56000054) /* Port F data */
+#define GPFUP (*(volatile unsigned long *)0x56000058) /* Pull-up control F */
+#define GPGCON (*(volatile unsigned long *)0x56000060) /* Port G control */
+#define GPGDAT (*(volatile unsigned long *)0x56000064) /* Port G data */
+#define GPGUP (*(volatile unsigned long *)0x56000068) /* Pull-up control G */
+#define GPHCON (*(volatile unsigned long *)0x56000070) /* Port H control */
+#define GPHDAT (*(volatile unsigned long *)0x56000074) /* Port H data */
+#define GPHUP (*(volatile unsigned long *)0x56000078) /* Pull-up control H */
+#define MISCCR (*(volatile unsigned long *)0x56000080) /* Miscellaneous control */
+#define DCLKCON (*(volatile unsigned long *)0x56000084) /* DCLK0/1 control */
+#define EXTINT0 (*(volatile unsigned long *)0x56000088) /* External interrupt control register 0 */
+#define EXTINT1 (*(volatile unsigned long *)0x5600008C) /* External interrupt control register 1 */
+#define EXTINT2 (*(volatile unsigned long *)0x56000090) /* External interrupt control register 2 */
+#define EINTFLT0 (*(volatile unsigned long *)0x56000094) /* Reserved */
+#define EINTFLT1 (*(volatile unsigned long *)0x56000098) /* Reserved */
+#define EINTFLT2 (*(volatile unsigned long *)0x5600009C) /* External interrupt filter control register 2 */
+#define EINTFLT3 (*(volatile unsigned long *)0x560000A0) /* External interrupt filter control register 3 */
+#define EINTMASK (*(volatile unsigned long *)0x560000A4) /* External interrupt mask */
+#define EINTPEND (*(volatile unsigned long *)0x560000A8) /* External interrupt pending */
+#define GSTATUS0 (*(volatile unsigned long *)0x560000AC) /* External pin status */
+#define GSTATUS1 (*(volatile unsigned long *)0x560000B0) /* Chip ID */
+#define GSTATUS2 (*(volatile unsigned long *)0x560000B4) /* Reset status */
+#define GSTATUS3 (*(volatile unsigned long *)0x560000B8) /* Inform register */
+#define GSTATUS4 (*(volatile unsigned long *)0x560000BC) /* Inform register */
+#define MSLCON (*(volatile unsigned long *)0x560000CC) /* Memory sleep control register */
+#define GPJCON (*(volatile unsigned long *)0x560000D0) /* Port J control */
+#define GPJDAT (*(volatile unsigned long *)0x560000D4) /* Port J data */
+#define GPJUP (*(volatile unsigned long *)0x560000D8) /* Pull-up control J */
 
 /* RTC */
 
-#define RTCCON (*(volatile char *)0x57000040) /* RTC control */
-#define TICNT (*(volatile char *)0x57000044) /* Tick time count */
-#define RTCALM (*(volatile char *)0x57000050) /* RTC alarm control */
-#define ALMSEC (*(volatile char *)0x57000054) /* Alarm second */
-#define ALMMIN (*(volatile char *)0x57000058) /* Alarm minute */
-#define ALMHOUR (*(volatile char *)0x5700005C) /* Alarm hour */
-#define ALMDATE (*(volatile char *)0x57000060) /* alarm day */
-#define ALMMON (*(volatile char *)0x57000064) /* Alarm month */
-#define ALMYEAR (*(volatile char *)0x57000068) /* Alarm year */
-#define BCDSEC (*(volatile char *)0x57000070) /* BCD second */
-#define BCDMIN (*(volatile char *)0x57000074) /* BCD minute */
-#define BCDHOUR (*(volatile char *)0x57000078) /* BCD hour */
-#define BCDDATE (*(volatile char *)0x5700007C) /* BCD day */
-#define BCDDAY (*(volatile char *)0x57000080) /* BCD date */
-#define BCDMON (*(volatile char *)0x57000084) /* BCD month */
-#define BCDYEAR (*(volatile char *)0x57000088) /* BCD year */
+#define RTCCON (*(volatile unsigned char *)0x57000040) /* RTC control */
+#define TICNT (*(volatile unsigned char *)0x57000044) /* Tick time count */
+#define RTCALM (*(volatile unsigned char *)0x57000050) /* RTC alarm control */
+#define ALMSEC (*(volatile unsigned char *)0x57000054) /* Alarm second */
+#define ALMMIN (*(volatile unsigned char *)0x57000058) /* Alarm minute */
+#define ALMHOUR (*(volatile unsigned char *)0x5700005C) /* Alarm hour */
+#define ALMDATE (*(volatile unsigned char *)0x57000060) /* alarm day */
+#define ALMMON (*(volatile unsigned char *)0x57000064) /* Alarm month */
+#define ALMYEAR (*(volatile unsigned char *)0x57000068) /* Alarm year */
+#define BCDSEC (*(volatile unsigned char *)0x57000070) /* BCD second */
+#define BCDMIN (*(volatile unsigned char *)0x57000074) /* BCD minute */
+#define BCDHOUR (*(volatile unsigned char *)0x57000078) /* BCD hour */
+#define BCDDATE (*(volatile unsigned char *)0x5700007C) /* BCD day */
+#define BCDDAY (*(volatile unsigned char *)0x57000080) /* BCD date */
+#define BCDMON (*(volatile unsigned char *)0x57000084) /* BCD month */
+#define BCDYEAR (*(volatile unsigned char *)0x57000088) /* BCD year */
 
 /* A/D Converter */
 
-#define ADCCON (*(volatile int *)0x58000000) /* ADC control */
-#define ADCTSC (*(volatile int *)0x58000004) /* ADC touch screen control */
-#define ADCDLY (*(volatile int *)0x58000008) /* ADC start or interval delay */
-#define ADCDAT0 (*(volatile int *)0x5800000C) /* ADC conversion data */
-#define ADCDAT1 (*(volatile int *)0x58000010) /* ADC conversion data */
-#define ADCUPDN (*(volatile int *)0x58000014) /* Stylus up or down interrupt status */
+#define ADCCON (*(volatile unsigned long *)0x58000000) /* ADC control */
+#define ADCTSC (*(volatile unsigned long *)0x58000004) /* ADC touch screen control */
+#define ADCDLY (*(volatile unsigned long *)0x58000008) /* ADC start or interval delay */
+#define ADCDAT0 (*(volatile unsigned long *)0x5800000C) /* ADC conversion data */
+#define ADCDAT1 (*(volatile unsigned long *)0x58000010) /* ADC conversion data */
+#define ADCUPDN (*(volatile unsigned long *)0x58000014) /* Stylus up or down interrupt status */
 
 /* SPI */
 
-#define SPCON0 (*(volatile int *)0x59000000) /* SPI control */
-#define SPSTA0 (*(volatile int *)0x59000004) /* SPI status */
-#define SPPIN0 (*(volatile int *)0x59000008) /* SPI pin control */
-#define SPPRE0 (*(volatile int *)0x5900000C) /* SPI baud rate prescaler */
-#define SPTDAT0 (*(volatile int *)0x59000010) /* SPI Tx data */
-#define SPRDAT0 (*(volatile int *)0x59000014) /* SPI Rx data */
-#define SPCON1 (*(volatile int *)0x59000020) /* SPI control */
-#define SPSTA1 (*(volatile int *)0x59000024) /* SPI status */
-#define SPPIN1 (*(volatile int *)0x59000028) /* SPI pin control */
-#define SPPRE1 (*(volatile int *)0x5900002C) /* SPI baud rate prescaler */
-#define SPTDAT1 (*(volatile int *)0x59000030) /* SPI Tx data */
-#define SPRDAT1 (*(volatile int *)0x59000034) /* SPI Rx data */
+#define SPCON0 (*(volatile unsigned long *)0x59000000) /* SPI control */
+#define SPSTA0 (*(volatile unsigned long *)0x59000004) /* SPI status */
+#define SPPIN0 (*(volatile unsigned long *)0x59000008) /* SPI pin control */
+#define SPPRE0 (*(volatile unsigned long *)0x5900000C) /* SPI baud rate prescaler */
+#define SPTDAT0 (*(volatile unsigned long *)0x59000010) /* SPI Tx data */
+#define SPRDAT0 (*(volatile unsigned long *)0x59000014) /* SPI Rx data */
+#define SPCON1 (*(volatile unsigned long *)0x59000020) /* SPI control */
+#define SPSTA1 (*(volatile unsigned long *)0x59000024) /* SPI status */
+#define SPPIN1 (*(volatile unsigned long *)0x59000028) /* SPI pin control */
+#define SPPRE1 (*(volatile unsigned long *)0x5900002C) /* SPI baud rate prescaler */
+#define SPTDAT1 (*(volatile unsigned long *)0x59000030) /* SPI Tx data */
+#define SPRDAT1 (*(volatile unsigned long *)0x59000034) /* SPI Rx data */
 
 /* SD Interface */
 
-#define SDICON (*(volatile int *)0x5A000000) /* SDI control */
-#define SDIPRE (*(volatile int *)0x5A000004) /* SDI baud rate prescaler */
-#define SDICARG (*(volatile int *)0x5A000008) /* SDI command argument */
-#define SDICCON (*(volatile int *)0x5A00000C) /* SDI command control */
-#define SDICSTA (*(volatile int *)0x5A000010) /* SDI command status */
-#define SDIRSP0 (*(volatile int *)0x5A000014) /* SDI response */
-#define SDIRSP1 (*(volatile int *)0x5A000018) /* SDI response */
-#define SDIRSP2 (*(volatile int *)0x5A00001C) /* SDI response */
-#define SDIRSP3 (*(volatile int *)0x5A000020) /* SDI response */
-#define SDIDTIMER (*(volatile int *)0x5A000024) /* SDI data / busy timer */
-#define SDIBSIZE (*(volatile int *)0x5A000028) /* SDI block size */
-#define SDIDCON (*(volatile int *)0x5A00002C) /* SDI data control */
-#define SDIDCNT (*(volatile int *)0x5A000030) /* SDI data remain counter */
-#define SDIDSTA (*(volatile int *)0x5A000034) /* SDI data status */
-#define SDIFSTA (*(volatile int *)0x5A000038) /* SDI FIFO status */
-#define SDIIMSK (*(volatile int *)0x5A00003C) /* SDI interrupt mask */
-#define SDIDAT (*(volatile char *)0x5A000040) /* SDI data */
+#define SDICON (*(volatile unsigned long *)0x5A000000) /* SDI control */
+#define SDIPRE (*(volatile unsigned long *)0x5A000004) /* SDI baud rate prescaler */
+#define SDICARG (*(volatile unsigned long *)0x5A000008) /* SDI command argument */
+#define SDICCON (*(volatile unsigned long *)0x5A00000C) /* SDI command control */
+#define SDICSTA (*(volatile unsigned long *)0x5A000010) /* SDI command status */
+#define SDIRSP0 (*(volatile unsigned long *)0x5A000014) /* SDI response */
+#define SDIRSP1 (*(volatile unsigned long *)0x5A000018) /* SDI response */
+#define SDIRSP2 (*(volatile unsigned long *)0x5A00001C) /* SDI response */
+#define SDIRSP3 (*(volatile unsigned long *)0x5A000020) /* SDI response */
+#define SDIDTIMER (*(volatile unsigned long *)0x5A000024) /* SDI data / busy timer */
+#define SDIBSIZE (*(volatile unsigned long *)0x5A000028) /* SDI block size */
+#define SDIDCON (*(volatile unsigned long *)0x5A00002C) /* SDI data control */
+#define SDIDCNT (*(volatile unsigned long *)0x5A000030) /* SDI data remain counter */
+#define SDIDSTA (*(volatile unsigned long *)0x5A000034) /* SDI data status */
+#define SDIFSTA (*(volatile unsigned long *)0x5A000038) /* SDI FIFO status */
+#define SDIIMSK (*(volatile unsigned long *)0x5A00003C) /* SDI interrupt mask */
+#define SDIDAT (*(volatile unsigned char *)0x5A000040) /* SDI data */
 
 /* AC97 Audio-CODEC Interface */
 
-#define AC_GLBCTRL (*(volatile int *)0x5B000000) /* AC97 global control register */
-#define AC_GLBSTAT (*(volatile int *)0x5B000004) /* AC97 global status register */
-#define AC_CODEC_CMD (*(volatile int *)0x5B000008) /* AC97 codec command register */
-#define AC_CODEC_STAT (*(volatile int *)0x5B00000C) /* AC97 codec status register */
-#define AC_PCMADDR (*(volatile int *)0x5B000010) /* AC97 PCM out/in channel FIFO address register */
-#define AC_MICADDR (*(volatile int *)0x5B000014) /* AC97 mic in channel FIFO address register */
-#define AC_PCMDATA (*(volatile int *)0x5B000018) /* AC97 PCM out/in channel FIFO data register */
-#define AC_MICDATA (*(volatile int *)0x5B00001C) /* AC97 MIC in channel FIFO data register */
+#define AC_GLBCTRL (*(volatile unsigned long *)0x5B000000) /* AC97 global control register */
+#define AC_GLBSTAT (*(volatile unsigned long *)0x5B000004) /* AC97 global status register */
+#define AC_CODEC_CMD (*(volatile unsigned long *)0x5B000008) /* AC97 codec command register */
+#define AC_CODEC_STAT (*(volatile unsigned long *)0x5B00000C) /* AC97 codec status register */
+#define AC_PCMADDR (*(volatile unsigned long *)0x5B000010) /* AC97 PCM out/in channel FIFO address register */
+#define AC_MICADDR (*(volatile unsigned long *)0x5B000014) /* AC97 mic in channel FIFO address register */
+#define AC_PCMDATA (*(volatile unsigned long *)0x5B000018) /* AC97 PCM out/in channel FIFO data register */
+#define AC_MICDATA (*(volatile unsigned long *)0x5B00001C) /* AC97 MIC in channel FIFO data register */
 
 /* Memory banks */
 
diff --git a/firmware/target/arm/mmu-arm.c b/firmware/target/arm/mmu-arm.c
index fff201cbfc..d86cd430b5 100644
--- a/firmware/target/arm/mmu-arm.c
+++ b/firmware/target/arm/mmu-arm.c
@@ -56,7 +56,7 @@ void __attribute__((naked)) map_section(unsigned int pa, unsigned int va, int mb
         :
     );
 
-    register int *ttb_base asm ("r3") = TTB_BASE;   /* force in r3 */
+    register unsigned long *ttb_base asm ("r3") = TTB_BASE;   /* force in r3 */
 
     asm volatile
     (
diff --git a/firmware/target/arm/s3c2440/debug-s3c2440.c b/firmware/target/arm/s3c2440/debug-s3c2440.c
index 97b7123a43..6c01f8bc1a 100644
--- a/firmware/target/arm/s3c2440/debug-s3c2440.c
+++ b/firmware/target/arm/s3c2440/debug-s3c2440.c
@@ -46,39 +46,40 @@ bool __dbg_ports(void)
     while(1)
     {
         line = 0;
-        snprintf(buf, sizeof(buf), "[Ports and Registers]");                        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "[Ports and Registers]");
+        lcd_puts(0, line++, buf);
 
-        snprintf(buf, sizeof(buf), "GPACON: %08x GPBCON: %08x", GPACON, GPBCON);    lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPADAT: %08x GPBDAT: %08x", GPADAT, GPBDAT);    lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPAUP:  %08x GPBUP:  %08x", 0, GPBUP);          lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPCCON: %08x GPDCON: %08x", GPCCON, GPDCON);    lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPCDAT: %08x GPDDAT: %08x", GPCDAT, GPDDAT);    lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPCUP:  %08x GPDUP:  %08x", GPCUP, GPDUP);      lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPACON: %08lx GPBCON: %08lx", GPACON, GPBCON);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPADAT: %08lx GPBDAT: %08lx", GPADAT, GPBDAT);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPAUP:  %08lx GPBUP:  %08lx", 0ul, GPBUP);      lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPCCON: %08lx GPDCON: %08lx", GPCCON, GPDCON);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPCDAT: %08lx GPDDAT: %08lx", GPCDAT, GPDDAT);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPCUP:  %08lx GPDUP:  %08lx", GPCUP, GPDUP);    lcd_puts(0, line++, buf);
 
-        snprintf(buf, sizeof(buf), "GPCCON: %08x GPDCON: %08x", GPCCON, GPDCON);    lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPCDAT: %08x GPDDAT: %08x", GPCDAT, GPDDAT);    lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPCUP:  %08x GPDUP:  %08x", GPCUP, GPDUP);      lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPCCON: %08lx GPDCON: %08lx", GPCCON, GPDCON);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPCDAT: %08lx GPDDAT: %08lx", GPCDAT, GPDDAT);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPCUP:  %08lx GPDUP:  %08lx", GPCUP, GPDUP);    lcd_puts(0, line++, buf);
 
-        snprintf(buf, sizeof(buf), "GPECON: %08x GPFCON: %08x", GPECON, GPFCON);    lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPEDAT: %08x GPFDAT: %08x", GPEDAT, GPFDAT);    lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPEUP:  %08x GPFUP:  %08x", GPEUP, GPFUP);      lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPECON: %08lx GPFCON: %08lx", GPECON, GPFCON);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPEDAT: %08lx GPFDAT: %08lx", GPEDAT, GPFDAT);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPEUP:  %08lx GPFUP:  %08lx", GPEUP, GPFUP);    lcd_puts(0, line++, buf);
 
-        snprintf(buf, sizeof(buf), "GPGCON: %08x GPHCON: %08x", GPGCON, GPHCON);    lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPGDAT: %08x GPHDAT: %08x", GPGDAT, GPHDAT);    lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPGUP:  %08x GPHUP:  %08x", GPGUP, GPHUP);      lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPGCON: %08lx GPHCON: %08lx", GPGCON, GPHCON);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPGDAT: %08lx GPHDAT: %08lx", GPGDAT, GPHDAT);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPGUP:  %08lx GPHUP:  %08lx", GPGUP, GPHUP);    lcd_puts(0, line++, buf);
 
-        snprintf(buf, sizeof(buf), "GPJCON: %08x", GPJCON);                         lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPJDAT: %08x", GPJDAT);                         lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "GPJUP:  %08x", GPJUP);                          lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPJCON: %08lx", GPJCON);                        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPJDAT: %08lx", GPJDAT);                        lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "GPJUP:  %08lx", GPJUP);                         lcd_puts(0, line++, buf);
         
         line++;
 
-        snprintf(buf, sizeof(buf), "SRCPND:  %08x INTMOD:  %08x", SRCPND, INTMOD);  lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "INTMSK:  %08x INTPND:  %08x", INTMSK, INTPND);  lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "CLKCON:  %08x CLKSLOW: %08x", CLKCON, CLKSLOW); lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "MPLLCON: %08x UPLLCON: %08x", MPLLCON, UPLLCON); lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "CLKDIVN: %08x CAMDIVN: %08x", CLKDIVN, CAMDIVN); lcd_puts(0, line++, buf);
-        snprintf(buf, sizeof(buf), "BWSCON:  %08x TCONSEL: %08x", BWSCON, TCONSEL);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "SRCPND:  %08lx INTMOD:  %08lx", SRCPND, INTMOD);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "INTMSK:  %08lx INTPND:  %08lx", INTMSK, INTPND);  lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "CLKCON:  %08lx CLKSLOW: %08lx", CLKCON, CLKSLOW); lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "MPLLCON: %08lx UPLLCON: %08lx", MPLLCON, UPLLCON); lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "CLKDIVN: %08lx CAMDIVN: %08lx", CLKDIVN, CAMDIVN); lcd_puts(0, line++, buf);
+        snprintf(buf, sizeof(buf), "BWSCON:  %08lx TCONSEL: %08lx", BWSCON, TCONSEL);  lcd_puts(0, line++, buf);
 
         lcd_update();
         if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
diff --git a/firmware/target/arm/s3c2440/gigabeat-fx/adc-meg-fx.c b/firmware/target/arm/s3c2440/gigabeat-fx/adc-meg-fx.c
index d821de4a30..fd5151a3bf 100644
--- a/firmware/target/arm/s3c2440/gigabeat-fx/adc-meg-fx.c
+++ b/firmware/target/arm/s3c2440/gigabeat-fx/adc-meg-fx.c
@@ -35,7 +35,7 @@ void adc_init(void)
     int i;
 
     /* Turn on the ADC PCLK */
-    s3c_regset(&CLKCON, 1<<15);
+    s3c_regset32(&CLKCON, 1<<15);
 
     /* Set channel 0, normal mode, disable "start by read" */
     ADCCON &= ~(0x3F);
diff --git a/firmware/target/arm/s3c2440/gigabeat-fx/i2c-meg-fx.c b/firmware/target/arm/s3c2440/gigabeat-fx/i2c-meg-fx.c
index 8300944243..836dedd462 100644
--- a/firmware/target/arm/s3c2440/gigabeat-fx/i2c-meg-fx.c
+++ b/firmware/target/arm/s3c2440/gigabeat-fx/i2c-meg-fx.c
@@ -43,7 +43,7 @@ void i2c_write(int addr, const unsigned char *buf, int count)
     mutex_lock(&i2c_mtx);
 
     /* Turn on I2C clock */
-    s3c_regset(&CLKCON, 1 << 16);
+    s3c_regset32(&CLKCON, 1 << 16);
 
     /* Set mode to master transmitter and enable lines */
     IICSTAT = I2C_MODE_MASTER | I2C_MODE_TX | I2C_RXTX_ENB;
@@ -76,7 +76,7 @@ void i2c_write(int addr, const unsigned char *buf, int count)
     IICSTAT = 0;
 
     /* Turn off I2C clock */
-    s3c_regclr(&CLKCON, 1 << 16);
+    s3c_regclr32(&CLKCON, 1 << 16);
 
     mutex_unlock(&i2c_mtx);
 }
@@ -92,11 +92,11 @@ void i2c_init(void)
     INTPND = IIC_MASK;
 
     /* Enable i2c interrupt in controller */
-    s3c_regclr(&INTMOD, IIC_MASK);
-    s3c_regclr(&INTMSK, IIC_MASK);
+    s3c_regclr32(&INTMOD, IIC_MASK);
+    s3c_regclr32(&INTMSK, IIC_MASK);
 
     /* Turn on I2C clock */
-    s3c_regset(&CLKCON, 1 << 16);
+    s3c_regset32(&CLKCON, 1 << 16);
 
     /* Set GPE15 (IICSDA) and GPE14 (IICSCL) to IIC */
     GPECON = (GPECON & ~((3 << 30) | (3 << 28))) |
@@ -110,7 +110,7 @@ void i2c_init(void)
     IICLC = (0 << 0);
 
     /* Turn off I2C clock */
-    s3c_regclr(&CLKCON, 1 << 16);
+    s3c_regclr32(&CLKCON, 1 << 16);
 }
 
 void IIC(void)
diff --git a/firmware/target/arm/s3c2440/gigabeat-fx/lcd-meg-fx.c b/firmware/target/arm/s3c2440/gigabeat-fx/lcd-meg-fx.c
index ac8dc380e2..f3461cfe91 100644
--- a/firmware/target/arm/s3c2440/gigabeat-fx/lcd-meg-fx.c
+++ b/firmware/target/arm/s3c2440/gigabeat-fx/lcd-meg-fx.c
@@ -103,7 +103,7 @@ static void LCD_CTRL_clock(bool onoff)
         GPDCON  |= 0xAAA0AAA0;
         GPDUP   |= 0xFCFC;
 
-        s3c_regset(&CLKCON, 0x20);  /* enable LCD clock */
+        s3c_regset32(&CLKCON, 0x20);  /* enable LCD clock */
         LCDCON1 |=0x01;
     }
     else
@@ -115,7 +115,7 @@ static void LCD_CTRL_clock(bool onoff)
         GPDUP   &= ~0xFCFC;
 
         LCDCON1 &= ~1;              /* Must diable first or bus may freeze */
-        s3c_regclr(&CLKCON, 0x20);  /* disable LCD clock */
+        s3c_regclr32(&CLKCON, 0x20);  /* disable LCD clock */
     }
 }
 
@@ -162,7 +162,7 @@ static void LCD_SPI_SS(bool select)
 
 static void LCD_SPI_start(void)
 {
-    s3c_regset(&CLKCON, 0x40000);   /* enable SPI clock */
+    s3c_regset32(&CLKCON, 0x40000);   /* enable SPI clock */
     LCD_SPI_SS(false);
     SPCON0=0x3E;
     SPPRE0=24;
@@ -176,7 +176,7 @@ static void LCD_SPI_stop(void)
     LCD_SPI_SS(false);
 
     SPCON0 &= ~0x10;
-    s3c_regclr(&CLKCON, 0x40000);    /* disable SPI clock */  
+    s3c_regclr32(&CLKCON, 0x40000);    /* disable SPI clock */  
 }
 
 static void LCD_SPI_powerdown(void)
@@ -271,7 +271,7 @@ void lcd_init_device(void)
 
     GPBUP   |= 0x181;
 
-    s3c_regset(&CLKCON, 0x20);  /* enable LCD clock */
+    s3c_regset32(&CLKCON, 0x20);  /* enable LCD clock */
 
     LCD_CTRL_setup();
     LCD_SPI_init();
diff --git a/firmware/target/arm/s3c2440/gigabeat-fx/pcm-meg-fx.c b/firmware/target/arm/s3c2440/gigabeat-fx/pcm-meg-fx.c
index c219922607..14fbcd5cfe 100644
--- a/firmware/target/arm/s3c2440/gigabeat-fx/pcm-meg-fx.c
+++ b/firmware/target/arm/s3c2440/gigabeat-fx/pcm-meg-fx.c
@@ -77,14 +77,14 @@ void pcm_apply_settings(void)
 void pcm_play_lock(void)
 {
     if (++dma_play_lock.locked == 1)
-        s3c_regset(&INTMSK, DMA2_MASK);
+        s3c_regset32(&INTMSK, DMA2_MASK);
 }
 
 /* Unmask the DMA interrupt if enabled */
 void pcm_play_unlock(void)
 {
     if (--dma_play_lock.locked == 0)
-        s3c_regclr(&INTMSK, dma_play_lock.state);
+        s3c_regclr32(&INTMSK, dma_play_lock.state);
 }
 
 void pcm_play_dma_init(void)
@@ -94,7 +94,7 @@ void pcm_play_dma_init(void)
     /* There seem to be problems when changing the IIS interface configuration
      * when a clock is not present.
      */
-    s3c_regset(&CLKCON, 1<<17);
+    s3c_regset32(&CLKCON, 1<<17);
     /* slave, transmit mode, 16 bit samples - MCLK 384fs - use 16.9344Mhz -
        BCLK 32fs */
     IISMOD = (1<<9) | (1<<8) | (2<<6) | (1<<3) | (1<<2) | (1<<0);
@@ -102,7 +102,7 @@ void pcm_play_dma_init(void)
     /* RX,TX off,on */
     IISCON |= (1<<3) | (1<<2);
 
-    s3c_regclr(&CLKCON, 1<<17);
+    s3c_regclr32(&CLKCON, 1<<17);
 
     audiohw_init();
 
@@ -115,11 +115,11 @@ void pcm_play_dma_init(void)
     /* Do not service DMA requests, yet */
 
     /* clear any pending int and mask it */
-    s3c_regset(&INTMSK, DMA2_MASK);
+    s3c_regset32(&INTMSK, DMA2_MASK);
     SRCPND = DMA2_MASK;
 
     /* connect to FIQ */
-    s3c_regset(&INTMOD, DMA2_MASK);
+    s3c_regset32(&INTMOD, DMA2_MASK);
 }
 
 void pcm_postinit(void)
@@ -159,7 +159,7 @@ static void play_start_pcm(void)
 static void play_stop_pcm(void)
 {
     /* Mask DMA interrupt */
-    s3c_regset(&INTMSK, DMA2_MASK);
+    s3c_regset32(&INTMSK, DMA2_MASK);
 
     /* De-Activate the DMA channel */
     DMASKTRIG2 = 0x4;
@@ -187,7 +187,7 @@ static void play_stop_pcm(void)
 void pcm_play_dma_start(const void *addr, size_t size)
 {
     /* Enable the IIS clock */
-    s3c_regset(&CLKCON, 1<<17);
+    s3c_regset32(&CLKCON, 1<<17);
 
     /* stop any DMA in progress - idle IIS */
     play_stop_pcm();
@@ -218,7 +218,7 @@ void pcm_play_dma_stop(void)
     play_stop_pcm();
 
     /* Disconnect the IIS clock */
-    s3c_regclr(&CLKCON, 1<<17);
+    s3c_regclr32(&CLKCON, 1<<17);
 }
 
 void pcm_play_dma_pause(bool pause)
diff --git a/firmware/target/arm/s3c2440/gigabeat-fx/system-meg-fx.c b/firmware/target/arm/s3c2440/gigabeat-fx/system-meg-fx.c
index 8065926e28..6d8108be49 100644
--- a/firmware/target/arm/s3c2440/gigabeat-fx/system-meg-fx.c
+++ b/firmware/target/arm/s3c2440/gigabeat-fx/system-meg-fx.c
@@ -118,34 +118,35 @@ static void set_page_tables(void)
     map_section((int)FRAME, (int)FRAME, 1, BUFFERED); /* enable buffered writing for the framebuffer */
 }
 
-void memory_init(void) {
+void memory_init(void)
+{
     ttb_init();
     set_page_tables();
     enable_mmu();
 }
 
-void s3c_regmod(volatile int *reg, unsigned int set, unsigned int clr)
+void s3c_regmod32(volatile unsigned long *reg, unsigned long bits,
+                  unsigned long mask)
 {
     int oldstatus = disable_interrupt_save(IRQ_FIQ_STATUS);
-    unsigned int val = *reg;
-    *reg = (val | set) & ~clr;
+    *reg = (*reg & ~mask) | (bits & mask);
     restore_interrupt(oldstatus);
 }
 
-void s3c_regset(volatile int *reg, unsigned int mask)
+void s3c_regset32(volatile unsigned long *reg, unsigned long bits)
 {
-    s3c_regmod(reg, mask, 0);
+    s3c_regmod32(reg, bits, bits);
 }
 
-void s3c_regclr(volatile int *reg, unsigned int mask)
+void s3c_regclr32(volatile unsigned long *reg, unsigned long bits)
 {
-    s3c_regmod(reg, 0, mask);
+    s3c_regmod32(reg, 0, bits);
 }
 
 void system_init(void)
 {
     INTMSK = 0xFFFFFFFF;
-     INTMOD =  0;
+    INTMOD =  0;
     SRCPND = 0xFFFFFFFF;
     INTPND = 0xFFFFFFFF;
     INTSUBMSK = 0xFFFFFFFF;
diff --git a/firmware/target/arm/s3c2440/gigabeat-fx/system-target.h b/firmware/target/arm/s3c2440/gigabeat-fx/system-target.h
index 46b726869b..43758ece08 100644
--- a/firmware/target/arm/s3c2440/gigabeat-fx/system-target.h
+++ b/firmware/target/arm/s3c2440/gigabeat-fx/system-target.h
@@ -31,11 +31,12 @@
 /* Functions to set and clear regiser bits atomically */
 
 /* Set and clear register bits */
-void s3c_regmod(volatile int *reg, unsigned int set, unsigned int clr);
+void s3c_regmod32(volatile unsigned long *reg, unsigned long bits,
+                  unsigned long mask);
 /* Set register bits */
-void s3c_regset(volatile int *reg, unsigned int mask);
+void s3c_regset32(volatile unsigned long *reg, unsigned long bits);
 /* Clear register bits */
-void s3c_regclr(volatile int *reg, unsigned int mask);
+void s3c_regclr32(volatile unsigned long *reg, unsigned long bits);
 
 #define HAVE_INVALIDATE_ICACHE
 static inline void invalidate_icache(void)