Remove the (very) incomplete port for the Tatung TPJ-1102

It was barely even a stub, and hasn't seen any development since 2009

Change-Id: I0aa15d9a7b90ae8c771924d9f401380d4cc0fab9

2 files changed, 0 insertions, 155 deletions

diff --git a/firmware/export/config.h b/firmware/export/config.h
index 383677865f..5700fad37f 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -105,7 +105,6 @@
 #define IRIVER_H10_PAD     12
 #define SANSA_E200_PAD     13
 #define SANSA_C200_PAD     14
-#define TATUNG_TPJ1022_PAD 15
 #define MROBE100_PAD       17
 #define MROBE500_PAD       18
 #define GIGABEAT_S_PAD     19
@@ -224,7 +223,6 @@
 #define LCD_GIGABEAT 12
 #define LCD_H10_20GB 13 /* as used by iriver H10 20Gb */
 #define LCD_H10_5GB  14 /* as used by iriver H10 5Gb */
-#define LCD_TPJ1022  15 /* as used by Tatung Elio TPJ-1022 */
 #define LCD_C200     17 /* as used by Sandisk Sansa c200 */
 #define LCD_MROBE500 18 /* as used by Olympus M:Robe 500i */
 #define LCD_MROBE100 19 /* as used by Olympus M:Robe 100 */
@@ -425,8 +423,6 @@ Lyre prototype 1 */
 #include "config/sansae200.h"
 #elif defined(SANSA_C200)
 #include "config/sansac200.h"
-#elif defined(TATUNG_TPJ1022)
-#include "config/tatungtpj1022.h"
 #elif defined(MROBE_100)
 #include "config/mrobe100.h"
 #elif defined(MROBE_500)
diff --git a/firmware/export/config/tatungtpj1022.h b/firmware/export/config/tatungtpj1022.h
deleted file mode 100644
index 3865e8f87f..0000000000
--- a/firmware/export/config/tatungtpj1022.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * This config file is for the Tatung Elio TPJ-1022
- */
-
-#define MODEL_NAME "Tatung Elio TPJ-1022"
-
-/* For Rolo and boot loader */
-#define MODEL_NUMBER 15
-
-/* define this if you use an ATA controller */
-#define CONFIG_STORAGE STORAGE_ATA
-
-/*define this if the ATA controller and method of USB access support LBA48 */
-#define HAVE_LBA48
-
-/* define this if you have recording possibility */
-/*#define HAVE_RECORDING*/ /* TODO: add support for this */
-
-/* define the bitmask of hardware sample rates */
-#define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
-                         SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
-
-/* define the bitmask of recording sample rates
-#define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
-                         SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
-
-
-
-
-/* define this if you have a colour LCD */
-#define HAVE_LCD_COLOR
-
-/* define this if you have access to the quickscreen */
-#define HAVE_QUICKSCREEN
-
-/* LCD dimensions */
-#define LCD_WIDTH  220
-#define LCD_HEIGHT 176
-/* sqrt(220^2 + 176^2) / 2.2 = 128.1 */
-#define LCD_DPI 128
-#define LCD_DEPTH  16   /* 65536 colours */
-#define LCD_PIXELFORMAT RGB565 
-
-/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
-
-#define CONFIG_KEYPAD TATUNG_TPJ1022_PAD
-
-
-
-
-/* define this if you have a real-time clock */
-#ifndef BOOTLOADER
-//#define CONFIG_RTC RTC_E8564
-#endif
-
-/* Define this if you have a software controlled poweroff */
-#define HAVE_SW_POWEROFF
-
-/* The number of bytes reserved for loadable codecs */
-#define CODEC_SIZE 0x100000
-
-/* The number of bytes reserved for loadable plugins */
-#define PLUGIN_BUFFER_SIZE 0x80000
-
-/* Define this if you have the WM8731 audio codec */
-#define HAVE_WM8731
-
-#define AB_REPEAT_ENABLE
-
-/* define this if you have a disk storage, i.e. something
-   that needs spinups and can cause skips when shaked */
-#define HAVE_DISK_STORAGE
-
-/* Define this for LCD backlight available */
-#define HAVE_BACKLIGHT
-
-#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity
-                                        TODO: check this, probably different
-                                        for different models too */
-#define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
-#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
-#define BATTERY_CAPACITY_INC 10   /* capacity increment */
-#define BATTERY_TYPES_COUNT  1    /* only one type */
-
-#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
-
-/* Hardware controlled charging? FIXME */
-#define CONFIG_CHARGING CHARGING_SIMPLE
-
-/* define this if the unit can be powered or charged via USB */
-/*#define HAVE_USB_POWER*/
-
-/* Define this if you have a PortalPlayer PP5020 */
-#define CONFIG_CPU PP5020
-
-/* Define this if you want to use the PP5020 i2c interface */
-#define CONFIG_I2C I2C_PP5020
-
-/* define this if the hardware can be powered off while charging */
-/* TODO: should this be set for the H10? */
-//#define HAVE_POWEROFF_WHILE_CHARGING
-
-/* The start address index for ROM builds */
-#define ROM_START 0x00000000
-
-/* Define this to the CPU frequency */
-/* TODO: this is probably wrong */
-#define CPU_FREQ      11289600
-
-/* Type of LCD */
-#define CONFIG_LCD LCD_TPJ1022
-
-#define DEFAULT_CONTRAST_SETTING    19
-
-/* Offset ( in the firmware file's header ) to the file length */
-#define FIRMWARE_OFFSET_FILE_LENGTH 0
-
-/* Offset ( in the firmware file's header ) to the file CRC */
-#define FIRMWARE_OFFSET_FILE_CRC 0
-
-/* Offset ( in the firmware file's header ) to the real data */
-#define FIRMWARE_OFFSET_FILE_DATA 8
-
-/* USB On-the-go */
-#define CONFIG_USBOTG USBOTG_ARC
-
-/* define this if the unit can be powered or charged via USB */
-#define HAVE_USB_POWER
-
-/* enable these for the experimental usb stack ROOLKU */
-#define HAVE_USBSTACK
-#define USB_VENDOR_ID 0x07B4
-#define USB_PRODUCT_ID 0x0280
-
-/* Define this if you have adjustable CPU frequency */
-#define HAVE_ADJUSTABLE_CPU_FREQ
-
-#define BOOTFILE_EXT "elio"
-#define BOOTFILE "rockbox." BOOTFILE_EXT
-#define BOOTDIR "/.rockbox"
-
-
-/* DMA is used only for reading on PP502x because although reads are ~8x faster
- * writes appear to be ~25% slower.
- */
-#ifndef BOOTLOADER
-#define HAVE_ATA_DMA
-#endif
-
-/* Define this if a programmable hotkey is mapped */
-//#define HAVE_HOTKEY