diff options
Diffstat (limited to 'firmware/export/config/tatungtpj1022.h')
| -rw-r--r-- | firmware/export/config/tatungtpj1022.h | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/firmware/export/config/tatungtpj1022.h b/firmware/export/config/tatungtpj1022.h deleted file mode 100644 index 3865e8f87f..0000000000 --- a/firmware/export/config/tatungtpj1022.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * This config file is for the Tatung Elio TPJ-1022 - */ - -#define MODEL_NAME "Tatung Elio TPJ-1022" - -/* For Rolo and boot loader */ -#define MODEL_NUMBER 15 - -/* define this if you use an ATA controller */ -#define CONFIG_STORAGE STORAGE_ATA - -/*define this if the ATA controller and method of USB access support LBA48 */ -#define HAVE_LBA48 - -/* define this if you have recording possibility */ -/*#define HAVE_RECORDING*/ /* TODO: add support for this */ - -/* define the bitmask of hardware sample rates */ -#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \ - SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) - -/* define the bitmask of recording sample rates -#define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \ - SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */ - - - - -/* define this if you have a colour LCD */ -#define HAVE_LCD_COLOR - -/* define this if you have access to the quickscreen */ -#define HAVE_QUICKSCREEN - -/* LCD dimensions */ -#define LCD_WIDTH 220 -#define LCD_HEIGHT 176 -/* sqrt(220^2 + 176^2) / 2.2 = 128.1 */ -#define LCD_DPI 128 -#define LCD_DEPTH 16 /* 65536 colours */ -#define LCD_PIXELFORMAT RGB565 - -/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ - -#define CONFIG_KEYPAD TATUNG_TPJ1022_PAD - - - - -/* define this if you have a real-time clock */ -#ifndef BOOTLOADER -//#define CONFIG_RTC RTC_E8564 -#endif - -/* Define this if you have a software controlled poweroff */ -#define HAVE_SW_POWEROFF - -/* The number of bytes reserved for loadable codecs */ -#define CODEC_SIZE 0x100000 - -/* The number of bytes reserved for loadable plugins */ -#define PLUGIN_BUFFER_SIZE 0x80000 - -/* Define this if you have the WM8731 audio codec */ -#define HAVE_WM8731 - -#define AB_REPEAT_ENABLE - -/* define this if you have a disk storage, i.e. something - that needs spinups and can cause skips when shaked */ -#define HAVE_DISK_STORAGE - -/* Define this for LCD backlight available */ -#define HAVE_BACKLIGHT - -#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity - TODO: check this, probably different - for different models too */ -#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */ -#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */ -#define BATTERY_CAPACITY_INC 10 /* capacity increment */ -#define BATTERY_TYPES_COUNT 1 /* only one type */ - -#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE - -/* Hardware controlled charging? FIXME */ -#define CONFIG_CHARGING CHARGING_SIMPLE - -/* define this if the unit can be powered or charged via USB */ -/*#define HAVE_USB_POWER*/ - -/* Define this if you have a PortalPlayer PP5020 */ -#define CONFIG_CPU PP5020 - -/* Define this if you want to use the PP5020 i2c interface */ -#define CONFIG_I2C I2C_PP5020 - -/* define this if the hardware can be powered off while charging */ -/* TODO: should this be set for the H10? */ -//#define HAVE_POWEROFF_WHILE_CHARGING - -/* The start address index for ROM builds */ -#define ROM_START 0x00000000 - -/* Define this to the CPU frequency */ -/* TODO: this is probably wrong */ -#define CPU_FREQ 11289600 - -/* Type of LCD */ -#define CONFIG_LCD LCD_TPJ1022 - -#define DEFAULT_CONTRAST_SETTING 19 - -/* Offset ( in the firmware file's header ) to the file length */ -#define FIRMWARE_OFFSET_FILE_LENGTH 0 - -/* Offset ( in the firmware file's header ) to the file CRC */ -#define FIRMWARE_OFFSET_FILE_CRC 0 - -/* Offset ( in the firmware file's header ) to the real data */ -#define FIRMWARE_OFFSET_FILE_DATA 8 - -/* USB On-the-go */ -#define CONFIG_USBOTG USBOTG_ARC - -/* define this if the unit can be powered or charged via USB */ -#define HAVE_USB_POWER - -/* enable these for the experimental usb stack ROOLKU */ -#define HAVE_USBSTACK -#define USB_VENDOR_ID 0x07B4 -#define USB_PRODUCT_ID 0x0280 - -/* Define this if you have adjustable CPU frequency */ -#define HAVE_ADJUSTABLE_CPU_FREQ - -#define BOOTFILE_EXT "elio" -#define BOOTFILE "rockbox." BOOTFILE_EXT -#define BOOTDIR "/.rockbox" - - -/* DMA is used only for reading on PP502x because although reads are ~8x faster - * writes appear to be ~25% slower. - */ -#ifndef BOOTLOADER -#define HAVE_ATA_DMA -#endif - -/* Define this if a programmable hotkey is mapped */ -//#define HAVE_HOTKEY |