summaryrefslogtreecommitdiff
path: root/drivers/pci/pcie
AgeCommit message (Collapse)Author
2021-07-06Merge branch 'pci/sysfs'Bjorn Helgaas
- Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński) - Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof Wilczyński) - Fix 'resource_alignment' newline issues (Krzysztof Wilczyński) - Add newline to 'devspec' sysfs file (Krzysztof Wilczyński) * pci/sysfs: PCI/sysfs: Add 'devspec' newline PCI/sysfs: Fix 'resource_alignment' newline issues PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions PCI/sysfs: Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s() PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun # Conflicts: # drivers/pci/p2pdma.c
2021-07-06Merge branch 'pci/hotplug'Bjorn Helgaas
- Ignore pciehp Link Down/Up caused by DPC so device remains bound to driver (Lukas Wunner) - Declare global cpci_debug in header file (Krzysztof Wilczyński) * pci/hotplug: PCI: cpcihp: Declare cpci_debug in header file PCI: pciehp: Ignore Link Down/Up caused by DPC
2021-06-16PCI: pciehp: Ignore Link Down/Up caused by DPCLukas Wunner
Downstream Port Containment (PCIe r5.0, sec. 6.2.10) disables the link upon an error and attempts to re-enable it when instructed by the DPC driver. A slot which is both DPC- and hotplug-capable is currently powered off by pciehp once DPC is triggered (due to the link change) and powered back up on successful recovery. That's undesirable, the slot should remain powered so the hotplugged device remains bound to its driver. DPC notifies the driver of the error and of successful recovery in pcie_do_recovery() and the driver may then restore the device to working state. Moreover, Sinan points out that turning off slot power by pciehp may foil recovery by DPC: Power off/on is a cold reset concurrently to DPC's warm reset. Sathyanarayanan reports extended delays or failure in link retraining by DPC if pciehp brings down the slot. Fix by detecting whether a Link Down event is caused by DPC and awaiting recovery if so. On successful recovery, ignore both the Link Down and the subsequent Link Up event. Afterwards, check whether the link is down to detect surprise-removal or another DPC event immediately after DPC recovery. Ensure that the corresponding DLLSC event is not ignored by synthesizing it and invoking irq_wake_thread() to trigger a re-run of pciehp_ist(). The IRQ threads of the hotplug and DPC drivers, pciehp_ist() and dpc_handler(), race against each other. If pciehp is faster than DPC, it will wait until DPC recovery completes. Recovery consists of two steps: The first step (waiting for link disablement) is recognizable by pciehp through a set DPC Trigger Status bit. The second step (waiting for link retraining) is recognizable through a newly introduced PCI_DPC_RECOVERING flag. If DPC is faster than pciehp, neither of the two flags will be set and pciehp may glean the recovery status from the new PCI_DPC_RECOVERED flag. The flag is zero if DPC didn't occur at all, hence DLLSC events are not ignored by default. pciehp waits up to 4 seconds before assuming that DPC recovery failed and bringing down the slot. This timeout is not taken from the spec (it doesn't mandate one) but based on a report from Yicong Yang that DPC may take a bit more than 3 seconds on HiSilicon's Kunpeng platform. The timeout is necessary because the DPC Trigger Status bit may never clear: On Root Ports which support RP Extensions for DPC, the DPC driver polls the DPC RP Busy bit for up to 1 second before giving up on DPC recovery. Without the timeout, pciehp would then wait indefinitely for DPC to complete. This commit draws inspiration from previous attempts to synchronize DPC with pciehp: By Sinan Kaya, August 2018: https://lore.kernel.org/linux-pci/20180818065126.77912-1-okaya@kernel.org/ By Ethan Zhao, October 2020: https://lore.kernel.org/linux-pci/20201007113158.48933-1-haifeng.zhao@intel.com/ By Kuppuswamy Sathyanarayanan, March 2021: https://lore.kernel.org/linux-pci/59cb30f5e5ac6d65427ceaadf1012b2ba8dbf66c.1615606143.git.sathyanarayanan.kuppuswamy@linux.intel.com/ Link: https://lore.kernel.org/r/0be565d97438fe2a6d57354b3aa4e8626952a00b.1619857124.git.lukas@wunner.de Reported-by: Sinan Kaya <okaya@kernel.org> Reported-by: Ethan Zhao <haifeng.zhao@intel.com> Reported-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <kbusch@kernel.org>
2021-06-03PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functionsKrzysztof Wilczyński
The sysfs_emit() and sysfs_emit_at() functions were introduced to make it less ambiguous which function is preferred when writing to the output buffer in a device attribute's "show" callback [1]. Convert the PCI sysfs object "show" functions from sprintf(), snprintf() and scnprintf() to sysfs_emit() and sysfs_emit_at() accordingly, as the latter is aware of the PAGE_SIZE buffer and correctly returns the number of bytes written into the buffer. No functional change intended. [1] Documentation/filesystems/sysfs.rst Related commit: ad025f8e46f3 ("PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions"). Link: https://lore.kernel.org/r/20210603000112.703037-2-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2021-05-27PCI/AER: Use consistent format when printing PCI deviceYicong Yang
We use format domain:bus:slot.function when printing PCI device. Use consistent format in AER messages. [bhelgaas: also drop "AER recover:" prefix since we already have an "AER:" prefix from pr_fmt()] Link: https://lore.kernel.org/r/1617015721-51701-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-05-04Merge branch 'pci/kernel-doc'Bjorn Helgaas
- Fix kernel-doc warnings (Krzysztof Wilczyński) * pci/kernel-doc: PCI: Fix kernel-doc errors
2021-03-11PCI: Fix kernel-doc errorsKrzysztof Wilczyński
Fix kernel-doc formatting errors, function names that don't match the doc, and some missing parameter documentation. These are reported by: make W=1 drivers/pci/ No functional change intended. [bhelgaas: squashed into one patch since this only changes comments] Link: https://lore.kernel.org/r/20210311001724.423356-1-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-2-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-3-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-4-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-5-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-6-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-7-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-8-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-03-10PCI/RCEC: Fix RCiEP device to RCEC associationQiuxu Zhuo
rcec_assoc_rciep() used "rciep->devfn" (a single byte encoding both the device and function number) as the device number to check whether the corresponding bit was set in the RCEC's Association Bitmap for RCiEPs. But per PCIe r5.0, sec 7.9.10.2, "Association Bitmap for RCiEPs", the 32-bit bitmap contains one bit per device. That bit applies to all functions of the device. Fix rcec_assoc_rciep() to convert the value of "rciep->devfn" to a device number to ensure that RCiEP devices are correctly associated with the RCEC. Reported-and-tested-by: Wen Jin <wen.jin@intel.com> Fixes: 507b460f8144 ("PCI/ERR: Add pcie_link_rcec() to associate RCiEPs") Link: https://lore.kernel.org/r/20210222011717.43266-1-qiuxu.zhuo@intel.com Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sean V Kelley <sean.v.kelley@intel.com>
2021-02-25Merge tag 'pci-v5.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Remove unnecessary locking around _OSC (Bjorn Helgaas) - Clarify message about _OSC failure (Bjorn Helgaas) - Remove notification of PCIe bandwidth changes (Bjorn Helgaas) - Tidy checking of syscall user config accessors (Heiner Kallweit) Resource management: - Decline to resize resources if boot config must be preserved (Ard Biesheuvel) - Fix pci_register_io_range() memory leak (Geert Uytterhoeven) Error handling (Keith Busch): - Clear error status from the correct device - Retain error recovery status so drivers can use it after reset - Log the type of Port (Root or Switch Downstream) that we reset - Always request a reset for Downstream Ports in frozen state Endpoint framework and NTB (Kishon Vijay Abraham I): - Make *_get_first_free_bar() take into account 64 bit BAR - Add helper API to get the 'next' unreserved BAR - Make *_free_bar() return error codes on failure - Remove unused pci_epf_match_device() - Add support to associate secondary EPC with EPF - Add support in configfs to associate two EPCs with EPF - Add pci_epc_ops to map MSI IRQ - Add pci_epf_ops to expose function-specific attrs - Allow user to create sub-directory of 'EPF Device' directory - Implement ->msi_map_irq() ops for cadence - Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence - Add EP function driver to provide NTB functionality - Add support for EPF PCI Non-Transparent Bridge - Add specification for PCI NTB function device - Add PCI endpoint NTB function user guide - Add configfs binding documentation for pci-ntb endpoint function Broadcom STB PCIe controller driver: - Add support for BCM4908 and external PERST# signal controller (Rafał Miłecki) Cadence PCIe controller driver: - Retrain Link to work around Gen2 training defect (Nadeem Athani) - Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof Wilczyński) Freescale Layerscape PCIe controller driver: - Add LX2160A rev2 EP mode support (Hou Zhiqiang) - Convert to builtin_platform_driver() (Michael Walle) MediaTek PCIe controller driver: - Fix OF node reference leak (Krzysztof Wilczyński) Microchip PolarFlare PCIe controller driver: - Add Microchip PolarFire PCIe controller driver (Daire McNamara) Qualcomm PCIe controller driver: - Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith) - Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Drop PCIE_RCAR config option (Lad Prabhakar) - Always allocate MSI addresses in 32bit space (Marek Vasut) Rockchip PCIe controller driver: - Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai) - Make 'ep-gpios' DT property optional (Chen-Yu Tsai) Synopsys DesignWare PCIe controller driver: - Work around ECRC configuration hardware defect (Vidya Sagar) - Drop support for config space in DT 'ranges' (Rob Herring) - Change size to u64 for EP outbound iATU (Shradha Todi) - Add upper limit address for outbound iATU (Shradha Todi) - Make dw_pcie ops optional (Jisheng Zhang) - Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang) Xilinx Versal CPM PCIe controller driver: - Fix OF node reference leak (Pan Bian) Miscellaneous: - Remove tango host controller driver (Arnd Bergmann) - Remove IRQ handler & data together (altera-msi, brcmstb, dwc) (Martin Kaiser) - Fix xgene-msi race in installing chained IRQ handler (Martin Kaiser) - Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He) - Fix pci-bridge-emul array overruns (Russell King) - Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej Siewior)" * tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits) PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064 PCI: qcom: Add support for ddrss_sf_tbu clock dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250 PCI: al: Remove useless dw_pcie_ops PCI: dwc: Don't assume the ops in dw_pcie always exist PCI: dwc: Add upper limit address for outbound iATU PCI: dwc: Change size to u64 for EP outbound iATU PCI: dwc: Drop support for config space in 'ranges' PCI: layerscape: Convert to builtin_platform_driver() PCI: layerscape: Add LX2160A rev2 EP mode support dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings PCI: dwc: Work around ECRC configuration issue PCI/portdrv: Report reset for frozen channel PCI/AER: Specify the type of Port that was reset PCI/ERR: Retain status from error notification PCI/AER: Clear AER status from Root Port when resetting Downstream Port PCI/ERR: Clear status of the reporting device dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B PCI: rockchip: Make 'ep-gpios' DT property optional Documentation: PCI: Add PCI endpoint NTB function user guide ...
2021-02-24Merge branch 'pci/link'Bjorn Helgaas
- Remove bandwidth notification for now to avoid reporting spam (Bjorn Helgaas) * pci/link: PCI/LINK: Remove bandwidth notification
2021-02-23PCI/portdrv: Report reset for frozen channelKeith Busch
The PCI error recovery always resets the link for a frozen state, so the port driver should return that a reset is required for its result. This will get the .slot_reset() callback invoked, which is necessary to restore the port's config space. Without this, the driver had been relying on downstream drivers to return this status. Link: https://lore.kernel.org/r/20210104230300.1277180-6-kbusch@kernel.org Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-23PCI/AER: Specify the type of Port that was resetKeith Busch
The AER driver may be called upon to reset either a Downstream or a Root Port. Check which type it is to properly identify it when logging that the reset occurred. Link: https://lore.kernel.org/r/20210104230300.1277180-5-kbusch@kernel.org Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-23PCI/ERR: Retain status from error notificationKeith Busch
Overwriting the frozen detected status with the result of the link reset loses the NEED_RESET result that drivers are depending on for error handling to report the .slot_reset() callback. Retain this status so that subsequent error handling has the correct flow. Link: https://lore.kernel.org/r/20210104230300.1277180-4-kbusch@kernel.org Reported-by: Hinko Kocevar <hinko.kocevar@ess.eu> Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean V Kelley <sean.v.kelley@intel.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-23PCI/AER: Clear AER status from Root Port when resetting Downstream PortKeith Busch
The pci_dev parameter given to aer_root_reset() may be a Downstream Port rather than the Root Port. Get the Root Port from the provided device in order to clear the root's AER status. Link: https://lore.kernel.org/r/20210104230300.1277180-3-kbusch@kernel.org Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean V Kelley <sean.v.kelley@intel.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-23PCI/ERR: Clear status of the reporting deviceKeith Busch
Error handling operates on the first Downstream Port above the detected error, but the error may have been reported by a downstream device. Clear the AER status of the device that reported the error rather than the first Downstream Port. Link: https://lore.kernel.org/r/20210104230300.1277180-2-kbusch@kernel.org Tested-by: Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean V Kelley <sean.v.kelley@intel.com> Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
2021-02-02PCI/LINK: Remove bandwidth notificationBjorn Helgaas
The PCIe Bandwidth Change Notification feature logs messages when the link bandwidth changes. Some users have reported that these messages occur often enough to significantly reduce NVMe performance. GPUs also seem to generate these messages. We don't know why the link bandwidth changes, but in the reported cases there's no indication that it's caused by hardware failures. Remove the bandwidth change notifications for now. Hopefully we can add this back when we have a better understanding of why this happens and how we can make the messages useful instead of overwhelming. Link: https://lore.kernel.org/r/20200115221008.GA191037@google.com/ Link: https://lore.kernel.org/r/155605909349.3575.13433421148215616375.stgit@gimli.home/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=206197 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-01-27Revert "PCI/ASPM: Save/restore L1SS Capability for suspend/resume"Bjorn Helgaas
This reverts commit 4257f7e008ea394fcecc050f1569c3503b8bcc15. Kenneth reported that after 4257f7e008ea, he sees a torrent of disk I/O errors on his NVMe device after suspend/resume until a reboot. Link: https://lore.kernel.org/linux-pci/20201228040513.GA611645@bjorn-Precision-5520/ Reported-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-15Merge branch 'pci/ptm'Bjorn Helgaas
- Save/restore Precision Time Measurement Capability for suspend/resume (David E. Box) - Disable PTM during suspend to save power (David E. Box) * pci/ptm: PCI: Disable PTM during suspend to save power PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume
2020-12-15Merge branch 'pci/err'Bjorn Helgaas
- Stop writing AER Capability when we don't own it (Sean V Kelley) - Bind RCEC devices to the Port driver (Qiuxu Zhuo) - Cache the RCEC RA Capability offset (Sean V Kelley) - Add pci_walk_bridge() (Sean V Kelley) - Clear AER status only when we control AER (Sean V Kelley) - Recover from RCEC AER errors (Sean V Kelley) - Add pcie_link_rcec() to associate RCiEPs with RCECs (Sean V Kelley) - Recover from RCiEP AER errors (Sean V Kelley) - Add pcie_walk_rcec() for RCEC AER handling (Sean V Kelley) - Add pcie_walk_rcec() for RCEC PME handling (Sean V Kelley) - Add RCEC AER error injection support (Qiuxu Zhuo) * pci/err: PCI/AER: Add RCEC AER error injection support PCI/PME: Add pcie_walk_rcec() to RCEC PME handling PCI/AER: Add pcie_walk_rcec() to RCEC AER handling PCI/ERR: Recover from RCiEP AER errors PCI/ERR: Add pcie_link_rcec() to associate RCiEPs PCI/ERR: Recover from RCEC AER errors PCI/ERR: Clear AER status only when we control AER PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() PCI/ERR: Avoid negated conditional for clarity PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() PCI/ERR: Simplify by computing pci_pcie_type() once PCI/ERR: Simplify by using pci_upstream_bridge() PCI/ERR: Rename reset_link() to reset_subordinates() PCI/ERR: Cache RCEC EA Capability offset in pci_init_capabilities() PCI/ERR: Bind RCEC devices to the Root Port driver PCI/AER: Write AER Capability only when we control it
2020-12-10PCI: Disable PTM during suspend to save powerDavid E. Box
There are systems (for example, Intel based mobile platforms since Coffee Lake) where the power drawn while suspended can be significantly reduced by disabling Precision Time Measurement (PTM) on PCIe root ports as this allows the port to enter a lower-power PM state and the SoC to reach a lower-power idle state. To save this power, disable the PTM feature on root ports during pci_prepare_to_sleep() and pci_finish_runtime_suspend(). The feature will be returned to its previous state during restore and error recovery. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209361 Link: https://lore.kernel.org/r/20201207223951.19667-2-david.e.box@linux.intel.com Reported-by: Len Brown <len.brown@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resumeDavid E. Box
The PCI subsystem does not currently save and restore the configuration space for the Precision Time Measurement (PTM) Extended Capability leading to the possibility of the feature returning disabled on S3 resume. This has been observed on Intel Coffee Lake desktops. Add save/restore of the PTM control register. This saves the PTM Enable, Root Select, and Effective Granularity bits. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20201207223951.19667-1-david.e.box@linux.intel.com Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-05PCI/AER: Add RCEC AER error injection supportQiuxu Zhuo
Root Complex Event Collectors (RCEC) appear as peers to Root Ports and may also have the AER capability. Add RCEC support to the AER error injection driver. Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-16-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-12-05PCI/PME: Add pcie_walk_rcec() to RCEC PME handlingSean V Kelley
Root Complex Event Collectors (RCEC) appear as peers of Root Ports and also have the PME capability. As with AER, there is a need to be able to walk the RCiEPs associated with their RCEC for purposes of acting upon them with callbacks. Add RCEC support through the use of pcie_walk_rcec() to the current PME service driver and attach the PME service driver to the RCEC device. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-15-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-05PCI/AER: Add pcie_walk_rcec() to RCEC AER handlingSean V Kelley
Root Complex Event Collectors (RCEC) appear as peers to Root Ports and also have the AER capability. In addition, actions need to be taken for associated RCiEPs. In such cases the RCECs will need to be walked in order to find and act upon their respective RCiEPs. Extend the existing ability to link the RCECs with a walking function pcie_walk_rcec(). Add RCEC support to the current AER service driver and attach the AER service driver to the RCEC device. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-14-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-12-05PCI/ERR: Recover from RCiEP AER errorsQiuxu Zhuo
Add support for handling AER errors detected by Root Complex Integrated Endpoints (RCiEPs). These errors are signaled to software natively via a Root Complex Event Collector (RCEC) or non-natively via ACPI APEI if the platform retains control of AER or uses a non-standard RCEC-like device. When recovering from RCiEP errors, the Root Error Command and Status registers are in the AER Capability of an associated RCEC (if any), not in a Root Port. In the non-native case, the platform is responsible for those registers and we can't touch them. [bhelgaas: commit log, etc] Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-13-sean.v.kelley@intel.com Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-05PCI/ERR: Add pcie_link_rcec() to associate RCiEPsSean V Kelley
A Root Complex Event Collector terminates error and PME messages from associated RCiEPs. Use the RCEC Endpoint Association Extended Capability to identify associated RCiEPs. Link the associated RCiEPs as the RCECs are enumerated. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-12-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-05PCI/ERR: Recover from RCEC AER errorsSean V Kelley
A Root Complex Event Collector (RCEC) collects and signals AER errors that were detected by Root Complex Integrated Endpoints (RCiEPs), but it may also signal errors it detects itself. This is analogous to errors detected and signaled by a Root Port. Update the AER service driver to claim RCECs in addition to Root Ports. Add support for handling RCEC-detected AER errors. This does not include handling RCiEP-detected errors that are signaled by the RCEC. Note that we expect these errors only from the native AER and APEI paths, not from DPC or EDR. [bhelgaas: split from combined RCEC/RCiEP patch, commit log] Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-04PCI/ERR: Clear AER status only when we control AERSean V Kelley
In some cases a bridge may not exist as the hardware controlling may be handled only by firmware and so is not visible to the OS. This scenario is also possible in future use cases involving non-native use of RCECs by firmware. In this scenario, we expect the platform to retain control of the bridge and to clear error status itself. Clear error status only when the OS has native control of AER. Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-04PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery()Sean V Kelley
Consolidate subordinate bus checks with pci_walk_bus() into pci_walk_bridge() for walking below potentially AER affected bridges. Link: https://lore.kernel.org/r/20201121001036.8560-10-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-04PCI/ERR: Avoid negated conditional for claritySean V Kelley
Reverse the sense of the Root Port/Downstream Port conditional for clarity. No functional change intended. Link: https://lore.kernel.org/r/20201121001036.8560-9-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Use "bridge" for clarity in pcie_do_recovery()Sean V Kelley
pcie_do_recovery() may be called with "dev" being either a bridge (Root Port or Switch Downstream Port) or an Endpoint. The bulk of the function deals with the bridge, so if we start with an Endpoint, we reset "dev" to be the bridge leading to it. For clarity, replace "dev" in the body of the function with "bridge". No functional change intended. Link: https://lore.kernel.org/r/20201121001036.8560-8-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Simplify by computing pci_pcie_type() onceSean V Kelley
Instead of calling pci_pcie_type(dev) twice, call it once and save the result. No functional change intended. Link: https://lore.kernel.org/r/20201121001036.8560-7-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Simplify by using pci_upstream_bridge()Sean V Kelley
Use pci_upstream_bridge() in place of dev->bus->self. No functional change intended. Link: https://lore.kernel.org/r/20201121001036.8560-6-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Rename reset_link() to reset_subordinates()Sean V Kelley
reset_link() appears to be misnamed. The point is to reset any devices below a given bridge, so rename it to reset_subordinates() to make it clear that we are passing a bridge with the intent to reset the devices below it. Link: https://lore.kernel.org/r/20201121001036.8560-5-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Cache RCEC EA Capability offset in pci_init_capabilities()Sean V Kelley
Extend support for Root Complex Event Collectors by decoding and caching the RCEC Endpoint Association Extended Capabilities when enumerating. Use that cached information for later error source reporting. See PCIe r5.0, sec 7.9.10. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-4-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Bind RCEC devices to the Root Port driverQiuxu Zhuo
If a Root Complex Integrated Endpoint (RCiEP) is implemented, it may signal errors through a Root Complex Event Collector (RCEC). Each RCiEP must be associated with no more than one RCEC. For an RCEC (which is technically not a Bridge), error messages "received" from associated RCiEPs must be enabled for "transmission" in order to cause a System Error via the Root Control register or (when the Advanced Error Reporting Capability is present) reporting via the Root Error Command register and logging in the Root Error Status register and Error Source Identification register. Given the commonality with Root Ports and the need to also support AER and PME services for RCECs, extend the Root Port driver to support RCEC devices by adding the RCEC Class ID to the driver structure. Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-3-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-12-01PCI/AER: Write AER Capability only when we control itSean V Kelley
If an OS has not been granted AER control via _OSC, it should not make changes to PCI_ERR_ROOT_COMMAND and PCI_ERR_ROOT_STATUS related registers. Per section 4.5.1 of the System Firmware Intermediary (SFI) _OSC and DPC Updates ECN [1], this bit also covers these aspects of the PCI Express Advanced Error Reporting. Based on the above and earlier discussion [2], make the following changes: Add a check for the native case (i.e., AER control via _OSC) Note that the previous "clear, reset, enable" order suggests that the reset might cause errors that we should ignore. After this commit, those errors (if any) will remain logged in the PCI_ERR_ROOT_STATUS register. [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [2] https://lore.kernel.org/linux-pci/20201020162820.GA370938@bjorn-Precision-5520/ Link: https://lore.kernel.org/r/20201121001036.8560-2-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-11-20PCI/ASPM: Save/restore L1SS Capability for suspend/resumeVidya Sagar
Previously ASPM L1 Substates control registers (CTL1 and CTL2) weren't saved and restored during suspend/resume leading to L1 Substates configuration being lost post-resume. Save the L1 Substates control registers so that the configuration is retained post-resume. Link: https://lore.kernel.org/r/20201024190442.871-1-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-21Merge branch 'pci/misc'Bjorn Helgaas
- Remove unnecessary #includes (Gustavo Pimentel) - Fix intel_mid_pci.c build error when !CONFIG_ACPI (Randy Dunlap) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Simplify pci-pf-stub by using module_pci_driver() (Liu Shixin) - Print IRQ used by Link Bandwidth Notification (Dongdong Liu) - Update sysfs mmap-related #ifdef comments (Clint Sbisa) - Simplify pci_dev_reset_slot_function() (Lukas Wunner) - Use "NULL" instead of "0" to fix sparse warnings (Gustavo Pimentel) - Simplify bool comparisons (Krzysztof Wilczyński) - Drop double zeroing for P2PDMA sg_init_table() (Julia Lawall) * pci/misc: PCI: v3-semi: Remove unneeded break PCI/P2PDMA: Drop double zeroing for sg_init_table() PCI: Simplify bool comparisons PCI: endpoint: Use "NULL" instead of "0" as a NULL pointer PCI: Simplify pci_dev_reset_slot_function() PCI: Update mmap-related #ifdef comments PCI/LINK: Print IRQ number used by port PCI/IOV: Simplify pci-pf-stub with module_pci_driver() PCI: Use scnprintf(), not snprintf(), in sysfs "show" functions x86/PCI: Fix intel_mid_pci.c build error when ACPI is not enabled PCI: Remove unnecessary header includes
2020-10-21Merge branch 'pci/hotplug'Bjorn Helgaas
- Use for_each_child_of_node() and for_each_node_by_name() instead of open-coding them (Qinglang Miao) - Reduce pciehp noisiness on hot removal (Lukas Wunner) - Remove unused assignment in shpchp (Krzysztof Wilczyński) * pci/hotplug: PCI: shpchp: Remove unused 'rc' assignment PCI: pciehp: Reduce noisiness on hot removal PCI: rpadlpar: Use for_each_child_of_node() and for_each_node_by_name()
2020-10-16PCI/ASPM: Remove struct pcie_link_state.l1ssSaheed O. Bolarinwa
Previously we computed L1.2 parameters in the enumeration path, saved them in struct pcie_link_state.l1ss, and programmed them into the devices whenever we enabled or disabled L1.2 on the link. But these parameters are constant and don't need to be updated when enabling/disabling L1.2. Compute and program the L1.2 parameters once during enumeration and remove the struct pcie_link_state.l1ss member. No functional change intended. [bhelgaas: rework to program L1.2 parameters during enumeration] Link: https://lore.kernel.org/r/20201015193039.12585-13-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_capSaheed O. Bolarinwa
Previously we stored the L1SS Capabilities value in the struct aspm_register_info. We only need this information in one place, so read it there and remove struct aspm_register_info completely, since it's now empty. No functional change intended. [bhelgaas: split up, don't cache l1ss_cap in pci_dev] Link: https://lore.kernel.org/r/20201015193039.12585-12-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_infoBjorn Helgaas
aspm_calc_l1ss_info() needs only the L1SS Capabilities. It doesn't need anything else from struct aspm_register_info, so pass only the Capabilities value. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-11-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1Saheed O. Bolarinwa
Previously we stored the L1SS Control 1 register in the struct aspm_register_info. We only need this information in one place, so read it there and remove it from struct aspm_register_info. No functional change intended. [bhelgaas: split ctl1/ctl2] Link: https://lore.kernel.org/r/20201015193039.12585-10-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)Bjorn Helgaas
We never use the aspm_register_info.l1ss_ctl2 value, so remove it. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-9-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptrSaheed O. Bolarinwa
Save the L1 Substates Capability pointer in struct pci_dev. Then we don't have to keep track of it in the struct aspm_register_info and struct pcie_link_state, which makes the code easier to read. No functional change intended. [bhelgaas: split to a separate patch] Link: https://lore.kernel.org/r/20201015193039.12585-8-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.latency_encodingSaheed O. Bolarinwa
Previously we stored L0s and L1 Exit Latency information from the Link Capabilities register in the struct aspm_register_info. We only need these latencies when we already have the Link Capabilities values, so use those directly and remove the latencies from struct aspm_register_info. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-7-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.enabledSaheed O. Bolarinwa
Previously we stored the "ASPM Control" bits from the Link Control register in the struct aspm_register_info. Read PCI_EXP_LNKCTL directly when needed. This means we can use the PCI_EXP_LNKCTL_ASPM_* bits directly instead of the similar but different PCIE_LINK_STATE_* bits. No functional change intended. [bhelgaas: drop get_aspm_enable() and read LNKCTL once directly] Link: https://lore.kernel.org/r/20201015193039.12585-6-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.supportSaheed O. Bolarinwa
Previously we stored the "ASPM Support" field from the Link Capabilities register in the struct aspm_register_info. Read the Link Capabilities directly when needed and remove it from the struct aspm_register_info. No functional change intended. [bhelgaas: remove pci_dev cached copy since LNKCAP isn't truly read-only, add PCI_EXP_LNKCAP_ASPM_L0S & PCI_EXP_LNKCAP_ASPM_L1, check them directly instead of adding aspm_support()] Link: https://lore.kernel.org/r/20201015193039.12585-5-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Use 'parent' and 'child' for readabilityBjorn Helgaas
Other users of link->pdev and link->downstream, e.g., pcie_aspm_cap_init(), pcie_config_aspm_l1ss(), and pcie_config_aspm_link(), use "parent" and "child" as local names. Do the same in aspm_calc_l1ss_info() for readability. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-4-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 00:36:02 +0000