Age | Commit message (Collapse) | Author |
|
When running as Xen PV guest, masking MSI-X is a responsibility of the
hypervisor. The guest has no write access to the relevant BAR at all - when
it tries to, it results in a crash like this:
BUG: unable to handle page fault for address: ffffc9004069100c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0
e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e]
e1000_probe+0x41f/0xdb0 [e1000e]
local_pci_probe+0x42/0x80
(...)
The recently introduced function msix_mask_all() does not check the global
variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking
of MSI[-X] interrupts.
Add the check to make this function XEN PV compatible.
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Add Rahul Tanwar as Intel LGM Gateway PCIe maintainer (Rahul Tanwar)
- Add Jim Quinlan et al as Broadcom STB PCIe maintainers (Jim Quinlan)
- Increase D3hot-to-D0 delay for AMD Renoir/Cezanne XHCI (Marcin
Bachry)
- Correct iomem_get_mapping() usage for legacy_mem sysfs (Krzysztof
Wilczyński)
* tag 'pci-v5.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/sysfs: Use correct variable for the legacy_mem sysfs object
PCI: Increase D3 delay for AMD Renoir/Cezanne XHCI
MAINTAINERS: Add Jim Quinlan et al as Broadcom STB PCIe maintainers
MAINTAINERS: Add Rahul Tanwar as Intel LGM Gateway PCIe maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Not much to see here. Half the fixes this time are for Qualcomm dts
files, fixing small mistakes on certain machines. The other fixes are:
- A 5.13 regression fix for freescale QE interrupt controller\
- A fix for TI OMAP gpt12 timer error handling
- A randconfig build regression fix for ixp4xx
- Another defconfig fix following the CONFIG_FB dependency rework"
* tag 'soc-fixes-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: fsl: qe: fix static checker warning
ARM: ixp4xx: fix building both pci drivers
ARM: configs: Update the nhk8815_defconfig
bus: ti-sysc: Fix error handling for sysc_check_active_timer()
soc: fsl: qe: convert QE interrupt controller to platform_device
arm64: dts: qcom: sdm845-oneplus: fix reserved-mem
arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem
arm64: dts: qcom: sc7280: Fixup cpufreq domain info for cpu7
arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping
arm64: dts: qcom: msm8992-bullhead: Remove PSCI
arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x
|
|
Two legacy PCI sysfs objects "legacy_io" and "legacy_mem" were updated
to use an unified address space in the commit 636b21b50152 ("PCI: Revoke
mappings like devmem"). This allows for revocations to be managed from
a single place when drivers want to take over and mmap() a /dev/mem
range.
Following the update, both of the sysfs objects should leverage the
iomem_get_mapping() function to get an appropriate address range, but
only the "legacy_io" has been correctly updated - the second attribute
seems to be using a wrong variable to pass the iomem_get_mapping()
function to.
Thus, correct the variable name used so that the "legacy_mem" sysfs
object would also correctly call the iomem_get_mapping() function.
Fixes: 636b21b50152 ("PCI: Revoke mappings like devmem")
Link: https://lore.kernel.org/r/20210812132144.791268-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The Renoir XHCI controller apparently doesn't resume reliably with the
standard D3hot-to-D0 delay. Increase it to 20ms.
[Alex: I talked to the AMD USB hardware team and the AMD Windows team and
they are not aware of any HW errata or specific issues. The HW works fine
in Windows. I was told Windows uses a rather generous default delay of
100ms for PCI state transitions.]
Link: https://lore.kernel.org/r/20210722025858.220064-1-alexander.deucher@amd.com
Signed-off-by: Marcin Bachry <hegel666@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Prike Liang <prike.liang@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
|
|
When both the old and the new PCI drivers are enabled
in the same kernel, there are a couple of namespace
conflicts that cause a build failure:
drivers/pci/controller/pci-ixp4xx.c:38: error: "IXP4XX_PCI_CSR" redefined [-Werror]
38 | #define IXP4XX_PCI_CSR 0x1c
|
In file included from arch/arm/mach-ixp4xx/include/mach/hardware.h:23,
from arch/arm/mach-ixp4xx/include/mach/io.h:15,
from arch/arm/include/asm/io.h:198,
from include/linux/io.h:13,
from drivers/pci/controller/pci-ixp4xx.c:20:
arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h:221: note: this is the location of the previous definition
221 | #define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
|
drivers/pci/controller/pci-ixp4xx.c:148:12: error: 'ixp4xx_pci_read' redeclared as different kind of symbol
148 | static int ixp4xx_pci_read(struct ixp4xx_pci *p, u32 addr, u32 cmd, u32 *data)
| ^~~~~~~~~~~~~~~
Rename both the ixp4xx_pci_read/ixp4xx_pci_write functions and the
IXP4XX_PCI_CSR macro. In each case, I went with the version that
has fewer callers to keep the change small.
Fixes: f7821b493458 ("PCI: ixp4xx: Add a new driver for IXP4xx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: soc@kernel.org
Link: https://lore.kernel.org/r/20210721151546.2325937-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Multi-MSI uses a single MSI descriptor and there is a single mask register
when the device supports per vector masking. To avoid reading back the mask
register the value is cached in the MSI descriptor and updates are done by
clearing and setting bits in the cache and writing it to the device.
But nothing protects msi_desc::masked and the mask register from being
modified concurrently on two different CPUs for two different Linux
interrupts which belong to the same multi-MSI descriptor.
Add a lock to struct device and protect any operation on the mask and the
mask register with it.
This makes the update of msi_desc::masked unconditional, but there is no
place which requires a modification of the hardware register without
updating the masked cache.
msi_mask_irq() is now an empty wrapper which will be cleaned up in follow
up changes.
The problem goes way back to the initial support of multi-MSI, but picking
the commit which introduced the mask cache is a valid cut off point
(2.6.30).
Fixes: f2440d9acbe8 ("PCI MSI: Refactor interrupt masking code")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.726833414@linutronix.de
|
|
No point in using the raw write function from shutdown. Preparatory change
to introduce proper serialization for the msi_desc::masked cache.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.674391354@linutronix.de
|
|
The comments about preserving the cached state in pci_msi[x]_shutdown() are
misleading as the MSI descriptors are freed right after those functions
return. So there is nothing to restore. Preparatory change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.621609423@linutronix.de
|
|
msi_mask_irq() takes a mask and a flags argument. The mask argument is used
to mask out bits from the cached mask and the flags argument to set bits.
Some places invoke it with a flags argument which sets bits which are not
used by the device, i.e. when the device supports up to 8 vectors a full
unmask in some places sets the mask to 0xFFFFFF00. While devices probably
do not care, it's still bad practice.
Fixes: 7ba1930db02f ("PCI MSI: Unmask MSI if setup failed")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.568173099@linutronix.de
|
|
Nothing enforces the posted writes to be visible when the function
returns. Flush them even if the flush might be redundant when the entry is
masked already as the unmask will flush as well. This is either setup or a
rare affinity change event so the extra flush is not the end of the world.
While this is more a theoretical issue especially the logic in the X86
specific msi_set_affinity() function relies on the assumption that the
update has reached the hardware when the function returns.
Again, as this never has been enforced the Fixes tag refers to a commit in:
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.515188147@linutronix.de
|
|
The specification (PCIe r5.0, sec 6.1.4.5) states:
For MSI-X, a function is permitted to cache Address and Data values
from unmasked MSI-X Table entries. However, anytime software unmasks a
currently masked MSI-X Table entry either by clearing its Mask bit or
by clearing the Function Mask bit, the function must update any Address
or Data values that it cached from that entry. If software changes the
Address or Data value of an entry while the entry is unmasked, the
result is undefined.
The Linux kernel's MSI-X support never enforced that the entry is masked
before the entry is modified hence the Fixes tag refers to a commit in:
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Enforce the entry to be masked across the update.
There is no point in enforcing this to be handled at all possible call
sites as this is just pointless code duplication and the common update
function is the obvious place to enforce this.
Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Reported-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.462096385@linutronix.de
|
|
When MSI-X is enabled the ordering of calls is:
msix_map_region();
msix_setup_entries();
pci_msi_setup_msi_irqs();
msix_program_entries();
This has a few interesting issues:
1) msix_setup_entries() allocates the MSI descriptors and initializes them
except for the msi_desc:masked member which is left zero initialized.
2) pci_msi_setup_msi_irqs() allocates the interrupt descriptors and sets
up the MSI interrupts which ends up in pci_write_msi_msg() unless the
interrupt chip provides its own irq_write_msi_msg() function.
3) msix_program_entries() does not do what the name suggests. It solely
updates the entries array (if not NULL) and initializes the masked
member for each MSI descriptor by reading the hardware state and then
masks the entry.
Obviously this has some issues:
1) The uninitialized masked member of msi_desc prevents the enforcement
of masking the entry in pci_write_msi_msg() depending on the cached
masked bit. Aside of that half initialized data is a NONO in general
2) msix_program_entries() only ensures that the actually allocated entries
are masked. This is wrong as experimentation with crash testing and
crash kernel kexec has shown.
This limited testing unearthed that when the production kernel had more
entries in use and unmasked when it crashed and the crash kernel
allocated a smaller amount of entries, then a full scan of all entries
found unmasked entries which were in use in the production kernel.
This is obviously a device or emulation issue as the device reset
should mask all MSI-X table entries, but obviously that's just part
of the paper specification.
Cure this by:
1) Masking all table entries in hardware
2) Initializing msi_desc::masked in msix_setup_entries()
3) Removing the mask dance in msix_program_entries()
4) Renaming msix_program_entries() to msix_update_entries() to
reflect the purpose of that function.
As the masking of unused entries has never been done the Fixes tag refers
to a commit in:
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: f036d4ea5fa7 ("[PATCH] ia32 Message Signalled Interrupt support")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.403833459@linutronix.de
|
|
The ordering of MSI-X enable in hardware is dysfunctional:
1) MSI-X is disabled in the control register
2) Various setup functions
3) pci_msi_setup_msi_irqs() is invoked which ends up accessing
the MSI-X table entries
4) MSI-X is enabled and masked in the control register with the
comment that enabling is required for some hardware to access
the MSI-X table
Step #4 obviously contradicts #3. The history of this is an issue with the
NIU hardware. When #4 was introduced the table access actually happened in
msix_program_entries() which was invoked after enabling and masking MSI-X.
This was changed in commit d71d6432e105 ("PCI/MSI: Kill redundant call of
irq_set_msi_desc() for MSI-X interrupts") which removed the table write
from msix_program_entries().
Interestingly enough nobody noticed and either NIU still works or it did
not get any testing with a kernel 3.19 or later.
Nevertheless this is inconsistent and there is no reason why MSI-X can't be
enabled and masked in the control register early on, i.e. move step #4
above to step #1. This preserves the NIU workaround and has no side effects
on other hardware.
Fixes: d71d6432e105 ("PCI/MSI: Kill redundant call of irq_set_msi_desc() for MSI-X interrupts")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.344136412@linutronix.de
|
|
Fix the following fallthrough warning (arm64-randconfig with Clang):
drivers/pci/proc.c:234:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough]
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert host bridge window patch that fixed HP EliteDesk 805 G6, but
broke ppc:sam460ex (Bjorn Helgaas)"
* tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Coalesce host bridge contiguous apertures"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
|
|
This reverts commit 65db04053efea3f3e412a7e0cc599962999c96b4.
Guenter reported that after 65db04053efe, the ppc:sam460ex qemu emulation
no longer boots from nvme:
nvme nvme0: Device not ready; aborting initialisation, CSTS=0x0
nvme nvme0: Removing after probe failure status: -19
Link: https://lore.kernel.org/r/20210709231529.GA3270116@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof
Wilczyński)
- Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s()
(Krzysztof Wilczyński)
- Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof
Wilczyński)
- Fix 'resource_alignment' newline issues (Krzysztof Wilczyński)
- Add 'devspec' newline (Krzysztof Wilczyński)
- Dynamically map ECAM regions (Russell King)
Resource management:
- Coalesce host bridge contiguous apertures (Kai-Heng Feng)
PCIe native device hotplug:
- Ignore Link Down/Up caused by DPC (Lukas Wunner)
Power management:
- Leave Apple Thunderbolt controllers on for s2idle or standby
(Konstantin Kharlamov)
Virtualization:
- Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun)
- Clarify error message for unbound IOV devices (Moritz Fischer)
- Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael
Norwitz)
Peer-to-peer DMA:
- Simplify distance calculation (Christoph Hellwig)
- Finish RCU conversion of pdev->p2pdma (Eric Dumazet)
- Rename upstream_bridge_distance() and rework doc (Logan Gunthorpe)
- Collect acs list in stack buffer to avoid sleeping (Logan
Gunthorpe)
- Use correct calc_map_type_and_dist() return type (Logan Gunthorpe)
- Warn if host bridge not in whitelist (Logan Gunthorpe)
- Refactor pci_p2pdma_map_type() (Logan Gunthorpe)
- Avoid pci_get_slot(), which may sleep (Logan Gunthorpe)
Altera PCIe controller driver:
- Add Joyce Ooi as Altera PCIe maintainer (Joyce Ooi)
Broadcom iProc PCIe controller driver:
- Fix multi-MSI base vector number allocation (Sandor Bodo-Merle)
- Support multi-MSI only on uniprocessor kernel (Sandor Bodo-Merle)
Freescale i.MX6 PCIe controller driver:
- Limit DBI register length for imx6qp PCIe (Richard Zhu)
- Add "vph-supply" for PHY supply voltage (Richard Zhu)
- Enable PHY internal regulator when supplied >3V (Richard Zhu)
- Remove imx6_pcie_probe() redundant error message (Zhen Lei)
Intel Gateway PCIe controller driver:
- Fix INTx enable (Martin Blumenstingl)
Marvell Aardvark PCIe controller driver:
- Fix checking for PIO Non-posted Request (Pali Rohár)
- Implement workaround for the readback value of VEND_ID (Pali Rohár)
MediaTek PCIe controller driver:
- Remove redundant error printing in mtk_pcie_subsys_powerup() (Zhen
Lei)
MediaTek PCIe Gen3 controller driver:
- Add missing MODULE_DEVICE_TABLE (Zou Wei)
Microchip PolarFlare PCIe controller driver:
- Make struct event_descs static (Krzysztof Wilczyński)
Microsoft Hyper-V host bridge driver:
- Fix race condition when removing the device (Long Li)
- Remove bus device removal unused refcount/functions (Long Li)
Mobiveil PCIe controller driver:
- Remove unused readl and writel functions (Krzysztof Wilczyński)
NVIDIA Tegra PCIe controller driver:
- Add missing MODULE_DEVICE_TABLE (Zou Wei)
NVIDIA Tegra194 PCIe controller driver:
- Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift (Jon Hunter)
- Fix host initialization during resume (Vidya Sagar)
Rockchip PCIe controller driver:
- Register IRQ handlers after device and data are ready (Javier
Martinez Canillas)"
* tag 'pci-v5.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma
PCI: xgene: Annotate __iomem pointer
PCI: Fix kernel-doc formatting
PCI: cpcihp: Declare cpci_debug in header file
MAINTAINERS: Add Joyce Ooi as Altera PCIe maintainer
PCI: rockchip: Register IRQ handlers after device and data are ready
PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift
PCI: aardvark: Implement workaround for the readback value of VEND_ID
PCI: aardvark: Fix checking for PIO Non-posted Request
PCI: tegra194: Fix host initialization during resume
PCI: tegra: Add missing MODULE_DEVICE_TABLE
PCI: imx6: Enable PHY internal regulator when supplied >3V
dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltage
PCI: imx6: Limit DBI register length for imx6qp PCIe
PCI: imx6: Remove imx6_pcie_probe() redundant error message
PCI: intel-gw: Fix INTx enable
PCI: iproc: Support multi-MSI only on uniprocessor kernel
PCI: iproc: Fix multi-MSI base vector number allocation
PCI: mediatek-gen3: Add missing MODULE_DEVICE_TABLE
PCI: Dynamically map ECAM regions
...
|
|
- Removed unused readl and writel functions (Krzysztof Wilczyński)
* remotes/lorenzo/pci/mobiveil:
PCI: mobiveil: Remove unused readl and writel functions
|
|
- Make struct event_descs static (Krzysztof Wilczyński)
* remotes/lorenzo/pci/microchip:
PCI: microchip: Make the struct event_descs static
|
|
- Add missing MODULE_DEVICE_TABLE for driver loading (Zou Wei)
* remotes/lorenzo/pci/mediatek-gen3:
PCI: mediatek-gen3: Add missing MODULE_DEVICE_TABLE
|
|
- Drop redundant error message from mtk_pcie_subsys_powerup() (Zhen Lei)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek: Remove redundant error printing in mtk_pcie_subsys_powerup()
|
|
- Fix multi-MSI base vector number allocation (Sandor Bodo-Merle)
- Restrict multi-MSI support to uniprocessor kernel (Sandor Bodo-Merle)
* remotes/lorenzo/pci/iproc:
PCI: iproc: Support multi-MSI only on uniprocessor kernel
PCI: iproc: Fix multi-MSI base vector number allocation
|
|
- Fix race when removing device (Long Li)
- Remove unused bus device removal refcount/functions (Long Li)
* remotes/lorenzo/pci/hv:
PCI: hv: Remove bus device removal unused refcount/functions
PCI: hv: Fix a race condition when removing the device
|
|
- Rename PCI_IOSIZE, etc in ftpci100 to avoid macro name collisions (Randy
Dunlap)
* remotes/lorenzo/pci/ftpci100:
PCI: ftpci100: Rename macro name collision
|
|
- Decode PIO Posted/Non-posted Request correctly in error logging (Pali
Rohár)
- Work around incorrect Vendor ID in Marvell Armada 3700 (Pali Rohár)
* remotes/lorenzo/pci/aardvark:
PCI: aardvark: Implement workaround for the readback value of VEND_ID
PCI: aardvark: Fix checking for PIO Non-posted Request
|
|
- Fix kernel-doc formatting errors (Krzysztof Wilczyński)
* pci/kernel-doc:
PCI: Fix kernel-doc formatting
|
|
- Annotate __iomem pointer (Bjorn Helgaas)
* pci/host/xgene:
PCI: xgene: Annotate __iomem pointer
|
|
- Fix host init during resume (Vidya Sagar)
- Fix ill-defined MSI IRQ shift behavior (Jon Hunter)
* pci/host/tegra194:
PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift
PCI: tegra194: Fix host initialization during resume
|
|
- Add missing MODULE_DEVICE_TABLE for driver loading (Zou Wei)
* pci/host/tegra:
PCI: tegra: Add missing MODULE_DEVICE_TABLE
|
|
- Register IRQ handlers after device and data are ready (Javier Martinez
Canillas)
* pci/host/rockchip:
PCI: rockchip: Register IRQ handlers after device and data are ready
|
|
- Fix INTx enable (Martin Blumenstingl)
* pci/host/intel-gw:
PCI: intel-gw: Fix INTx enable
|
|
- Drop redundant error message from imx6_pcie_probe() (Zhen Lei)
- Limit DBI register length on i.MX 6QuadPlus (Richard Zhu)
- Add "vph-supply" to indicate which regulator supplies PHY (Richard Zhu)
- Enable PHY internal regulator when supplied >3V (Richard Zhu)
* pci/host/imx6:
PCI: imx6: Enable PHY internal regulator when supplied >3V
dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltage
PCI: imx6: Limit DBI register length for imx6qp PCIe
PCI: imx6: Remove imx6_pcie_probe() redundant error message
|
|
- Clarify error message for unbound devices (Moritz Fischer)
* pci/virtualization:
PCI/IOV: Clarify error message for unbound devices
|
|
- Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński)
- Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof
Wilczyński)
- Fix 'resource_alignment' newline issues (Krzysztof Wilczyński)
- Add newline to 'devspec' sysfs file (Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Add 'devspec' newline
PCI/sysfs: Fix 'resource_alignment' newline issues
PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions
PCI/sysfs: Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s()
PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun
# Conflicts:
# drivers/pci/p2pdma.c
|
|
- Coalesce host bridge apertures so we can allocate large BARs that cross
contiguous apertures (Kai-Heng Feng)
* pci/resource:
PCI: Coalesce host bridge contiguous apertures
|
|
- Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael
Norwitz)
- Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun)
* pci/reset:
PCI: Work around Huawei Intelligent NIC VF FLR erratum
PCI: Add pci_reset_bus_function() Secondary Bus Reset interface
|
|
- Leave Apple Thunderbolt controllers on for s2idle or standby so they work
after resume (Konstantin Kharlamov)
* pci/pm:
PCI: Leave Apple Thunderbolt controllers on for s2idle or standby
|
|
- Rename Rename upstream_bridge_distance() to calc_map_type_and_dist()
(Logan Gunthorpe)
- Collect ACS list message in stack buffer to avoid sleeping (Logan
Gunthorpe)
- Use correct calc_map_type_and_dist() return type (Logan Gunthorpe)
- Warn if host bridge not in whitelist (Logan Gunthorpe)
- Refactor pci_p2pdma_map_type() (Logan Gunthorpe)
- Avoid pci_get_slot(), which may sleep (Logan Gunthorpe)
- Simplify distance calculation in __calc_map_type_and_dist() and
calc_map_type_and_dist_warn() (Christoph Hellwig)
- Finish RCU conversion of pdev->p2pdma (Eric Dumazet)
* pci/p2pdma:
PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma
PCI/P2PDMA: Simplify distance calculation
PCI/P2PDMA: Avoid pci_get_slot(), which may sleep
PCI/P2PDMA: Refactor pci_p2pdma_map_type()
PCI/P2PDMA: Warn if host bridge not in whitelist
PCI/P2PDMA: Use correct calc_map_type_and_dist() return type
PCI/P2PDMA: Collect acs list in stack buffer to avoid sleeping
PCI/P2PDMA: Rename upstream_bridge_distance() and rework doc
|
|
- Ignore pciehp Link Down/Up caused by DPC so device remains bound to
driver (Lukas Wunner)
- Declare global cpci_debug in header file (Krzysztof Wilczyński)
* pci/hotplug:
PCI: cpcihp: Declare cpci_debug in header file
PCI: pciehp: Ignore Link Down/Up caused by DPC
|
|
- Make domain/bus/dev/fn format in AER messages match pci_name() format
(Yicong Yang)
* pci/error:
Documentation: PCI: Fix typo in pci-error-recovery.rst
PCI/AER: Use consistent format when printing PCI device
|
|
While looking at pci_alloc_p2pmem() I found RCU protection was not properly
applied there, as pdev->p2pdma was potentially read multiple times.
Fix pci_alloc_p2pmem(), add __rcu qualifier to p2pdma field of struct
pci_dev, and fix all other accesses to this field with proper RCU verbs.
Link: https://lore.kernel.org/r/20210701095621.3129283-1-eric.dumazet@gmail.com
Fixes: 1570175abd16 ("PCI/P2PDMA: track pgmap references per resource, not globally")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
|
|
"bar_addr" is passed as the argument to writel(), which expects a
"void __iomem *". Annotate "bar_addr" correctly. Resolves an sparse
"incorrect type in argument 2 (different address spaces)" warning.
Link: https://lore.kernel.org/r/202105171809.Tay9fImZ-lkp@intel.com
Link: https://lore.kernel.org/r/20210517171839.25777-1-helgaas@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Fix kernel-doc formatting throughout drivers/pci and related include files.
No change to functionality intended.
Check for warnings:
$ find include drivers/pci -type f -path "*pci*.[ch]" | xargs scripts/kernel-doc -none
[bhelgaas: squashed to one commit]
Link: https://lore.kernel.org/r/20210509030237.368540-1-kw@linux.com
Link: https://lore.kernel.org/r/20210703151306.1922450-1-kw@linux.com
Link: https://lore.kernel.org/r/20210703151306.1922450-2-kw@linux.com
Link: https://lore.kernel.org/r/20210703151306.1922450-3-kw@linux.com
Link: https://lore.kernel.org/r/20210703151306.1922450-4-kw@linux.com
Link: https://lore.kernel.org/r/20210703151306.1922450-5-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt patches for 5.14-rc1.
Nothing major here just lots of little changes for new hardware and
features. Highlights are:
- more USB 4 support added to the thunderbolt core
- build warning fixes all over the place
- usb-serial driver updates and new device support
- mtu3 driver updates
- gadget driver updates
- dwc3 driver updates
- dwc2 driver updates
- isp1760 host driver updates
- musb driver updates
- lots of other tiny things.
Full details are in the shortlog.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits)
phy: qcom-qusb2: Add configuration for SM4250 and SM6115
dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible
dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250
USB: cdc-acm: blacklist Heimann USB Appset device
usb: xhci-mtk: allow multiple Start-Split in a microframe
usb: ftdi-elan: remove redundant continue statement in a while-loop
usb: class: cdc-wdm: return the correct errno code
xhci: remove redundant continue statement
usb: dwc3: Fix debugfs creation flow
usb: gadget: hid: fix error return code in hid_bind()
usb: gadget: eem: fix echo command packet response issue
usb: gadget: f_hid: fix endianness issue with descriptors
Revert "USB: misc: Add onboard_usb_hub driver"
Revert "of/platform: Add stubs for of_platform_device_create/destroy()"
Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()"
Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub"
xhci: solve a double free problem while doing s4
xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning
xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk
xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES
...
|
|
Pull VFIO updates from Alex Williamson:
- Module reference fixes, structure renaming (Max Gurtovoy)
- Export and use common pci_dev_trylock() (Luis Chamberlain)
- Enable direct mdev device creation and probing by parent (Christoph
Hellwig & Jason Gunthorpe)
- Fix mdpy error path leak (Colin Ian King)
- Fix mtty list entry leak (Jason Gunthorpe)
- Enforce mtty device limit (Alex Williamson)
- Resolve concurrent vfio-pci mmap faults (Alex Williamson)
* tag 'vfio-v5.14-rc1' of git://github.com/awilliam/linux-vfio:
vfio/pci: Handle concurrent vma faults
vfio/mtty: Enforce available_instances
vfio/mtty: Delete mdev_devices_list
vfio: use the new pci_dev_trylock() helper to simplify try lock
PCI: Export pci_dev_trylock() and pci_dev_unlock()
vfio/mdpy: Fix memory leak of object mdev_state->vconfig
vfio/iommu_type1: rename vfio_group struck to vfio_iommu_group
vfio/mbochs: Convert to use vfio_register_group_dev()
vfio/mdpy: Convert to use vfio_register_group_dev()
vfio/mtty: Convert to use vfio_register_group_dev()
vfio/mdev: Allow the mdev_parent_ops to specify the device driver to bind
vfio/mdev: Remove CONFIG_VFIO_MDEV_DEVICE
driver core: Export device_driver_attach()
driver core: Don't return EPROBE_DEFER to userspace during sysfs bind
driver core: Flow the return code from ->probe() through to sysfs bind
driver core: Better distinguish probe errors in really_probe
driver core: Pull required checks into driver_probe_device()
vfio/platform: remove unneeded parent_module attribute
vfio: centralize module refcount in subsystem layer
|
|
cpci_debug is declared as a global variable in cpci_hotplug_core.c and used
in cpci_hotplug_pci.c via an "extern". Add an extern declaration in the
header file.
Resolves the following sparse warning:
drivers/pci/hotplug/cpci_hotplug_core.c:47:5: warning: symbol 'cpci_debug' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20210701184306.1492003-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD enables two more GPUs, with resulting header files
- i915 has started to move to TTM for discrete GPU and enable DG1
discrete GPU support (not by default yet)
- new HyperV drm driver
- vmwgfx adds arm64 support
- TTM refactoring ongoing
- 16bpc display support for AMD hw
Otherwise it's just the usual insane amounts of work all over the
place in lots of drivers and the core, as mostly summarised below:
Core:
- mark AGP ioctls as legacy
- disable force probing for non-master clients
- HDR metadata property helpers
- HDMI infoframe signal colorimetry support
- remove drm_device.pdev pointer
- remove DRM_KMS_FB_HELPER config option
- remove drm_pci_alloc/free
- drm_err_*/drm_dbg_* helpers
- use drm driver names for fbdev
- leaked DMA handle fix
- 16bpc fixed point format fourcc
- add prefetching memcpy for WC
- Documentation fixes
aperture:
- add aperture ownership helpers
dp:
- aux fixes
- downstream 0 port handling
- use extended base receiver capability DPCD
- Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
- mst: use khz as link rate during init
- VCPI fixes for StarTech hub
ttm:
- provide tt_shrink file via debugfs
- warn about freeing pinned BOs
- fix swapping error handling
- move page alignment into BO
- cleanup ttm_agp_backend
- add ttm_sys_manager
- don't override vm_ops
- ttm_bo_mmap removed
- make ttm_resource base of all managers
- remove VM_MIXEDMAP usage
panel:
- sysfs_emit support
- simple: runtime PM support
- simple: power up panel when reading EDID + caching
bridge:
- MHDP8546: HDCP support + DT bindings
- MHDP8546: Register DP AUX channel with userspace
- TI SN65DSI83 + SN65DSI84: add driver
- Sil8620: Fix module dependencies
- dw-hdmi: make CEC driver loading optional
- Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
- It66121: Add driver + DT bindings
- Adv7511: Support I2S IEC958 encoding
- Anx7625: fix power-on delay
- Nwi-dsi: Modesetting fixes; Cleanups
- lt6911: add missing MODULE_DEVICE_TABLE
- cdns: fix PM reference leak
hyperv:
- add new DRM driver for HyperV graphics
efifb:
- non-PCI device handling fixes
i915:
- refactor IP/device versioning
- XeLPD Display IP preperation work
- ADL-P enablement patches
- DG1 uAPI behind BROKEN
- disable mmap ioctl for discerte GPUs
- start enabling HuC loading for Gen12+
- major GuC backend rework for new platforms
- initial TTM support for Discrete GPUs
- locking rework for TTM prep
- use correct max source link rate for eDP
- %p4cc format printing
- GLK display fixes
- VLV DSI panel power fixes
- PSR2 disabled for RKL and ADL-S
- ACPI _DSM invalid access fixed
- DMC FW path abstraction
- ADL-S PCI ID update
- uAPI headers converted to kerneldoc
- initial LMEM support for DG1
- x86/gpu: add Jasperlake to gen11 early quirks
amdgpu:
- Aldebaran updates + initial SR-IOV
- new GPU: Beige Goby and Yellow Carp support
- more LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- PCIe ASPM support
- Renoir TMZ enablement
- initial multiple eDP panel support
- use fdinfo to track devices/process info
- pin/unpin TTM fixes
- free resource on fence usage query
- fix fence calculation
- fix hotunplug/suspend issues
- GC/MM register access macro cleanup for SR-IOV
- W=1 fixes
- ACPI ATCS/ATIF handling rework
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes
- new INFO query for additional vbios info
amdkfd:
- SR-IOV aldebaran support
- HMM SVM support
radeon:
- SMU regression fixes
- Oland flickering fix
vmwgfx:
- enable console with fbdev emulation
- fix cpu updates of coherent multisample surfaces
- remove reservation semaphore
- add initial SVGA3 support
- support arm64
msm:
- devcoredump support for display errors
- dpu/dsi: yaml bindings conversion
- mdp5: alpha/blend_mode/zpos support
- a6xx: cached coherent buffer support
- gpu iova fault improvement
- a660 support
rockchip:
- RK3036 win1 scaling support
- RK3066/3188 missing register support
- RK3036/3066/3126/3188 alpha support
mediatek:
- MT8167 HDMI support
- MT8183 DPI dual edge support
tegra:
- fixed YUV support/scaling on Tegra186+
ast:
- use pcim_iomap
- fix DP501 EDID
bochs:
- screen blanking support
etnaviv:
- export more GPU ID values to userspace
- add HWDB entry for GPU on i.MX8MP
- rework linear window calcs
exynos:
- pm runtime changes
imx:
- Annotate dma_fence critical section
- fix PRG modifiers after drmm conversion
- Add 8 pixel alignment fix for 1366x768
- fix YUV advertising
- add color properties
ingenic:
- IPU planes fix
panfrost:
- Mediatek MT8183 support + DT bindings
- export AFBC_FEATURES register to userspace
simpledrm:
- %pr for printing resources
nouveau:
- pin/unpin TTM fixes
qxl:
- unpin shadow BO
virtio:
- create dumb BOs as guest blob
vkms:
- drmm_universal_plane_alloc
- add XRGB plane composition
- overlay support"
* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
drm/i915: Reinstate the mmap ioctl for some platforms
drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
Revert "drm/msm/mdp5: provide dynamic bandwidth management"
drm/msm/mdp5: provide dynamic bandwidth management
drm/msm/mdp5: add perf blocks for holding fudge factors
drm/msm/mdp5: switch to standard zpos property
drm/msm/mdp5: add support for alpha/blend_mode properties
drm/msm/mdp5: use drm_plane_state for pixel blend mode
drm/msm/mdp5: use drm_plane_state for storing alpha value
drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
drm/msm: Add debugfs to trigger shrinker
drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
drm/msm: devcoredump iommu fault support
iommu/arm-smmu-qcom: Add stall support
drm/msm: Improve the a6xx page fault handler
iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
iommu/arm-smmu: Add support for driver IOMMU fault handlers
drm/msm: export hangcheck_period in debugfs
drm/msm/a6xx: add support for Adreno 660 GPU
...
|
|
An IRQ handler may be called at any time after it is registered, so
anything it relies on must be ready before registration.
rockchip_pcie_subsys_irq_handler() and rockchip_pcie_client_irq_handler()
read registers in the PCIe controller, but we registered them before
turning on clocks to the controller. If either is called before the clocks
are turned on, the register reads fail and the machine hangs.
Similarly, rockchip_pcie_legacy_int_handler() uses rockchip->irq_domain,
but we installed it before initializing irq_domain.
Register IRQ handlers after their data structures are initialized and
clocks are enabled.
Found by enabling CONFIG_DEBUG_SHIRQ, which calls the IRQ handler when it
is being unregistered. An error during the probe path might cause this
unregistration and IRQ handler execution before the device or data
structure init has finished.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20210608080409.1729276-1-javierm@redhat.com
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
|