summaryrefslogtreecommitdiff
path: root/drivers/irqchip/Kconfig
AgeCommit message (Collapse)Author
2021-06-06irqchip/qcom-pdc: Switch to IRQCHIP_PLATFORM_DRIVER and allow as a moduleSaravana Kannan
This patch revives changes from Saravana Kannan to switch the qcom-pdc driver to use IRQCHIP_PLATFORM_DRIVER helper macros, and allows qcom-pdc driver to be loaded as a permanent module. Earlier attempts at this ran into trouble with loading dependencies, but with Saravana's fw_devlink=on set by default now we should avoid those. [jstultz: Folded in with my changes to allow the driver to be loadable as a permenent module] Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <maz@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maulik Shah <mkshah@codeaurora.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-arm-msm@vger.kernel.org Cc: iommu@lists.linux-foundation.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210518211922.3474368-1-john.stultz@linaro.org
2021-05-10irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLEGeert Uytterhoeven
The Apple Interrupt Controller is only present on Apple Silicon SoCs. Hence add a dependency on ARCH_APPLE, to prevent asking the user about this driver when configuring a kernel without Apple Silicon SoC support. Drop the default, as ARCH_APPLE already selects APPLE_AIC. Fixes: 76cde26394114f6a ("irqchip/apple-aic: Add support for the Apple Interrupt Controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/f37e8daea37d50651d2164b0b3dad90780188548.1618316398.git.geert+renesas@glider.be
2021-04-26Merge tag 'arm-apple-m1-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Apple M1 platform support from Arnd Bergmann: "The Apple M1 is the processor used it all current generation Apple Macintosh computers. Support for this platform so far is rudimentary, but it boots and can use framebuffer and serial console over a special USB cable. Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe) is work in progress but was not ready in time. A very detailed description of what works is in the commit message of commit 1bb2fd3880d4 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the AsahiLinux wiki" Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/ * tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: asm-generic/io.h: Unbork ioremap_np() declaration arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree dt-bindings: display: Add apple,simple-framebuffer arm64: Kconfig: Introduce CONFIG_ARCH_APPLE irqchip/apple-aic: Add support for the Apple Interrupt Controller dt-bindings: interrupt-controller: Add DT bindings for apple-aic arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h of/address: Add infrastructure to declare MMIO as non-posted asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np arm64: Implement ioremap_np() to map MMIO as nGnRnE docs: driver-api: device-io: Document ioremap() variants & access funcs docs: driver-api: device-io: Document I/O access functions asm-generic/io.h: Add a non-posted variant of ioremap() arm64: arch_timer: Implement support for interrupt-names dt-bindings: timer: arm,arch_timer: Add interrupt-names support arm64: cputype: Add CPU implementor & types for the Apple M1 cores dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles dt-bindings: arm: apple: Add bindings for Apple ARM platforms dt-bindings: vendor-prefixes: Add apple prefix
2021-04-24irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMPRobert Hancock
Previously the XILINX_INTC config option was hidden and only auto-selected on the MicroBlaze platform. However, this IP can also be used on the Zynq and ZynqMP platforms as a secondary cascaded controller. Allow this option to be user-enabled on those platforms. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210423185853.2556087-1-robert.hancock@calian.com
2021-04-22irqchip: Add support for IDT 79rc3243x interrupt controllerThomas Bogendoerfer
IDT 79rc3243x SoCs have rather simple interrupt controllers connected to the MIPS CPU interrupt lines. Each of them has room for up to 32 interrupts. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210422145330.73452-1-tsbogend@alpha.franken.de
2021-04-08irqchip/apple-aic: Add support for the Apple Interrupt ControllerHector Martin
This is the root interrupt controller used on Apple ARM SoCs such as the M1. This irqchip driver performs multiple functions: * Handles both IRQs and FIQs * Drives the AIC peripheral itself (which handles IRQs) * Dispatches FIQs to downstream hard-wired clients (currently the ARM timer). * Implements a virtual IPI multiplexer to funnel multiple Linux IPIs into a single hardware IPI Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-04-08irqchip/wpcm450: Drop COMPILE_TESTMarc Zyngier
This driver is (for now) ARM specific, and currently doesn't build with a variety of architectures (ia64, RISC-V, x86_64 at the very least). Drop COMPILE_TEST from Kconfig until it gets sorted out. Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-04-07irqchip: Add driver for WPCM450 interrupt controllerJonathan Neuschäfer
The WPCM450 AIC ("Advanced Interrupt Controller") is the interrupt controller found in the Nuvoton WPCM450 SoC and other Winbond/Nuvoton SoCs. The list of registers if based on the AMI vendor kernel and the Nuvoton W90N745 datasheet. Although the hardware supports other interrupt modes, the driver only supports high-level interrupts at the moment, because other modes could not be tested so far. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210406120921.2484986-7-j.neuschaefer@gmx.net
2021-03-08irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLERMarc Zyngier
Implementing CONFIG_GENERIC_IRQ_MULTI_HANDLER is a decision that is made at the architecture level, and shouldn't involve the irqchip at all (we even provide a fallback helper when the option isn't selected). Drop all instances of such selection from non-arch code. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210217142800.2547737-1-maz@kernel.org Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hector Martin <marcan@marcan.st> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-02-15Merge tag 'irqchip-5.12' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier - New driver for the MIPS-based Realtek RTL838x/RTL839x SoC - Conversion of the sun6i-r support code to a hierarchical setup - Fix wake-up interrupts for the ls-extirq driver - Fix MSI allocation for the loongson-pch-msi driver - Add compatible strings for new Qualcomm SoCs - Tidy up a few Kconfig entries (IMX, CSKY) - Spelling phyksiz - Remove the sirfsoc and tango drivers Link: https://lore.kernel.org/r/20210214124015.3333457-1-maz@kernel.org
2021-02-14irqchip/imx: IMX_INTMUX should not default to y, unconditionallyGeert Uytterhoeven
Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of IMX_INTMUX to ARCH_MXC, and ask the user in case of compile-testing. Fixes: 66968d7dfc3f5451 ("irqchip: Add COMPILE_TEST support for IMX_INTMUX") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210208145605.422943-1-geert+renesas@glider.be
2021-02-04irqchip/csky-mpintc: Prevent selection on unsupported platformsGuo Ren
The irq-csky-mpintc driver is only supported on CPU_CK860 and it will generate a compilation error when selected with CPU_CK610. As it is already selected directly in the architecture Kconfig, drop the option to select it manually. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> [maz: rewrote commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210204074609.3553018-1-guoren@kernel.org
2021-01-21irqchip: Remove sigma tango driverArnd Bergmann
The tango platform is getting removed, so the driver is no longer needed. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210120133008.2421897-2-arnd@kernel.org
2021-01-10irqchip/pruss: Simplify the TI_PRUSS_INTC KconfigSuman Anna
The TI PRUSS INTC irqchip driver handles the local interrupt controller which is a child device of it's parent PRUSS/ICSSG device. The driver was upstreamed in parallel with the PRUSS platform driver, and was configurable independently previously. The PRUSS interrupt controller is an integral part of the overall PRUSS software architecture, and is not useful at all by itself. Simplify the TI_PRUSS_INTC Kconfig dependencies by making it silent and selected automatically when the TI_PRUSS platform driver is enabled. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210108162901.6003-1-s-anna@ti.com
2020-12-11drivers/irqchip: Remove EZChip NPS interrupt controllerVineet Gupta
NPS platform has been removed from ARC port and there are no in-tree users of it now. So RIP ! Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <maz@kernel.org> Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20201105212210.1891598-3-vgupta@synopsys.com
2020-11-08Merge tag 'irq-urgent-2020-11-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Fix the fallout of the IPI as interrupt conversion in Kconfig and the BCM2836 interrupt chip driver - Fixes for interrupt affinity setting and the handling of hierarchical irq domains in the SiFive PLIC driver - Make the unmapped event handling in the TI SCI driver work correctly - A few minor fixes and cleanups in various chip drivers and Kconfig" * tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events irqchip/ti-sci-inta: Add support for unmapped event handling dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm irqchip/sifive-plic: Fix chip_data access within a hierarchy irqchip/sifive-plic: Fix broken irq_set_affinity() callback irqchip/stm32-exti: Add all LP timer exti direct events support irqchip/bcm2836: Fix missing __init annotation irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY irqchip/mst: Make mst_intc_of_init static irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7 genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY
2020-10-16irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHYMarc Zyngier
Now that GENERIC_IRQ_IPI selects IRQ_DOMAIN_HIERARCHY, there is no need to have this conditional select for IRQ_MIPS_CPU. Similarily, MIPS_GIC only needs selecting GENERIC_IRQ_IPI. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-15irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7Geert Uytterhoeven
The MStar interrupt controller is only found on MStar, SigmaStar, and Mediatek SoCs. Hence add dependencies on ARCH_MEDIATEK and ARCH_MSTARV7, to prevent asking the user about the MStar interrupt controller driver when configuring a kernel without support for MStar, SigmaStar, and Mediatek SoCs. Fixes: ad4c938c92af9130 ("irqchip/irq-mst: Add MStar interrupt controller support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Daniel Palmer <daniel@thingy.jp> Link: https://lore.kernel.org/r/20201014131703.18021-1-geert+renesas@glider.be
2020-10-14Merge tag 'mfd-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
2020-10-10Merge branch 'irq/mstar' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-10irqchip/irq-mst: Add MStar interrupt controller supportMark-PK Tsai
Add MStar interrupt controller support using hierarchy irq domain. Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Daniel Palmer <daniel@thingy.jp> Link: https://lore.kernel.org/r/20200902063344.1852-2-mark-pk.tsai@mediatek.com
2020-09-28Merge branch 'irq/ipi-as-irq', remote-tracking branches 'origin/irq/dw' and ↵Marc Zyngier
'origin/irq/owl' into irq/irqchip-next Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-25irqchip/dw-apb-ictl: Add primary interrupt controller supportZhen Lei
Add support to use dw-apb-ictl as primary interrupt controller. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> [maz: minor fixups] Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Haoyu Lv <lvhaoyu@huawei.com> Link: https://lore.kernel.org/r/20200924071754.4509-4-thunder.leizhen@huawei.com
2020-09-17Merge remote-tracking branch 'origin/irq/misc-5.10' into irq/irqchip-nextMarc Zyngier
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip: Add sl28cpld interrupt controller supportMichael Walle
Add support for the interrupt controller inside the sl28 CPLD management controller. The interrupt controller can handle at most 8 interrupts and is really simplistic and consists only of an interrupt mask and an interrupt pending register. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-17irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCsSuman Anna
The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP, commonly called ICSSG. The PRUSS INTC present within the ICSSG supports more System Events (160 vs 64), more Interrupt Channels and Host Interrupts (20 vs 10) compared to the previous generation PRUSS INTC instances. The first 2 and the last 10 of these host interrupt lines are used by the PRU and other auxiliary cores and sub-modules within the ICSSG, with 8 host interrupts connected to MPU. The host interrupts 5, 6, 7 are also connected to the other ICSSG instances within the SoC and can be partitioned as per system integration through the board dts files. Enhance the PRUSS INTC driver to add support for this ICSSG INTC instance. Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-17irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interruptsGrzegorz Jaszczyk
The Programmable Real-Time Unit Subsystem (PRUSS) contains a local interrupt controller (INTC) that can handle various system input events and post interrupts back to the device-level initiators. The INTC can support upto 64 input events with individual control configuration and hardware prioritization. These events are mapped onto 10 output interrupt lines through two levels of many-to-one mapping support. Different interrupt lines are routed to the individual PRU cores or to the host CPU, or to other devices on the SoC. Some of these events are sourced from peripherals or other sub-modules within that PRUSS, while a few others are sourced from SoC-level peripherals/devices. The PRUSS INTC platform driver manages this PRUSS interrupt controller and implements an irqchip driver to provide a Linux standard way for the PRU client users to enable/disable/ack/re-trigger a PRUSS system event. The system events to interrupt channels and output interrupts relies on the mapping configuration provided either through the PRU firmware blob (for interrupts routed to PRU cores) or via the PRU application's device tree node (for interrupt routed to the main CPU). In the first case the mappings will be programmed on PRU remoteproc driver demand (via irq_create_fwspec_mapping) during the boot of a PRU core and cleaned up after the PRU core is stopped. Reference counting is used to allow multiple system events to share a single channel and to allow multiple channels to share a single host event. The PRUSS INTC module is reference counted during the interrupt setup phase through the irqchip's irq_request_resources() and irq_release_resources() ops. This restricts the module from being removed as long as there are active interrupt users. The driver currently supports and can be built for OMAP architecture based AM335x, AM437x and AM57xx SoCs; Keystone2 architecture based 66AK2G SoCs and Davinci architecture based OMAP-L13x/AM18x/DA850 SoCs. All of these SoCs support 64 system events, 10 interrupt channels and 10 output interrupt lines per PRUSS INTC with a few SoC integration differences. NOTE: Each PRU-ICSS's INTC on AM57xx SoCs is preceded by a Crossbar that enables multiple external events to be routed to a specific number of input interrupt events. Any non-default external interrupt event directed towards PRUSS needs this crossbar to be setup properly. Co-developed-by: Suman Anna <s-anna@ti.com> Co-developed-by: Andrew F. Davis <afd@ti.com> Co-developed-by: Roger Quadros <rogerq@ti.com> Co-developed-by: David Lechner <david@lechnology.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-09-13irqchip: Kconfig: Update description for RENESAS_IRQC configLad Prabhakar
irq-renesas-irqc driver is also used on Renesas RZ/G{1,2} SoC's, update the same to reflect the description for RENESAS_IRQC config. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200911100439.19878-1-prabhakar.mahadev-lad.rj@bp.renesas.com
2020-08-25irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER ↵Marc Zyngier
helperse It has become obvious that switching a number of irqchip drivers to being platform drivers without considering the platform was a mistake. We have multiple reports of end-point drivers not probing because the irqchip driver isn't there yet, breaking the expectations of the users. This patch reverts: 920ecb8c35cb ("irqchip/mtk-cirq: Convert to a platform driver") f97dbf48ca43 ("irqchip/mtk-sysirq: Convert to a platform driver") 5be57099d445 ("irqchip/qcom-pdc: Switch to using IRQCHIP_PLATFORM_DRIVER helper macros") 95bf9305d2e3 ("irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent module") and leave QCOM PDC, MTK sysrq and cirq drivers as built-in, special purpose drivers for the time being until we have worked out a better solution. Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reported-by: Frank Wunderlich <linux@fw-web.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/93debe6a0308b66d3f307af67ba7ec2c@kernel.org
2020-08-04Merge tag 'irq-core-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The usual boring updates from the interrupt subsystem: - Infrastructure to allow building irqchip drivers as modules - Consolidation of irqchip ACPI probing - Removal of the EOI-preflow interrupt handler which was required for SPARC support and became obsolete after SPARC was converted to use sparse interrupts. - Cleanups, fixes and improvements all over the place" * tag 'irq-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) irqchip/loongson-pch-pic: Fix the misused irq flow handler irqchip/loongson-htvec: Support 8 groups of HT vectors irqchip/loongson-liointc: Fix misuse of gc->mask_cache dt-bindings: interrupt-controller: Update Loongson HTVEC description irqchip/imx-intmux: Fix irqdata regs save in imx_intmux_runtime_suspend() irqchip/imx-intmux: Implement intmux runtime power management irqchip/gic-v4.1: Use GFP_ATOMIC flag in allocate_vpe_l1_table() irqchip: Fix IRQCHIP_PLATFORM_DRIVER_* compilation by including module.h irqchip/stm32-exti: Map direct event to irq parent irqchip/mtk-cirq: Convert to a platform driver irqchip/mtk-sysirq: Convert to a platform driver irqchip/qcom-pdc: Switch to using IRQCHIP_PLATFORM_DRIVER helper macros irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros irqchip: irq-bcm2836.h: drop a duplicated word irqchip/gic-v4.1: Ensure accessing the correct RD when writing INVALLR irqchip/irq-bcm7038-l1: Guard uses of cpu_logical_map irqchip/gic-v3: Remove unused register definition irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent module genirq: Export irq_chip_retrigger_hierarchy and irq_chip_set_vcpu_affinity_parent irqdomain: Export irq_domain_update_bus_token ...
2020-07-27irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent moduleJohn Stultz
Allows qcom-pdc driver to be loaded as a permanent module Also, due to the fact that IRQCHIP_DECLARE becomes a no-op when building as a module, we have to replace it with platform driver hooks explicitly. Thanks to Saravana for his help on pointing out the IRQCHIP_DECLARE issue and guidance on a solution. Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <maz@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maulik Shah <mkshah@codeaurora.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-arm-msm@vger.kernel.org Cc: iommu@lists.linux-foundation.org Cc: linux-gpio@vger.kernel.org Link: https://lore.kernel.org/r/20200710231824.60699-4-john.stultz@linaro.org
2020-07-17irqchip/loongson-htpic: Remove unneeded select of I8259Tiezhu Yang
LOONGSON_HTPIC depends on MACH_LOONGSON64 and MACH_LOONGSON64 already selects I8259 in arch/mips/Kconfig, so no need to select I8259 again when config LOONGSON_HTPIC. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1594087972-21715-3-git-send-email-yangtiezhu@loongson.cn
2020-06-21irqchip/loongson-pci-msi: Fix a typo in KconfigJiaxun Yang
PCH MSI driver's menuconfig entry was wrong. Fix it. Fixes: 632dcc2c75ef ("irqchip: Add Loongson PCH MSI controller") Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200530121113.1797678-2-jiaxun.yang@flygoat.com
2020-06-09irqchip: RISC-V per-HART local interrupt controller driverAnup Patel
The RISC-V per-HART local interrupt controller manages software interrupts, timer interrupts, external interrupts (which are routed via the platform level interrupt controller) and other per-HART local interrupts. We add a driver for the RISC-V local interrupt controller, which eventually replaces the RISC-V architecture code, allowing for a better split between arch code and drivers. The driver is compliant with RISC-V Hart-Level Interrupt Controller DT bindings located at: Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt Co-developed-by: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> [Palmer: Cleaned up warnings] Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2020-06-01irqchip: Fix "Loongson HyperTransport Vector support" driver build on all ↵Ingo Molnar
non-MIPS platforms This commit: 818e915fbac5: ("irqchip: Add Loongson HyperTransport Vector support") Added a MIPS-only driver, but turned on compilation on all other architectures as well: config LOONGSON_HTVEC bool "Loongson3 HyperTransport Interrupt Vector Controller" depends on MACH_LOONGSON64 || COMPILE_TEST But this driver was never build tested on any other architecture than MIPS: drivers/irqchip/irq-loongson-htvec.c: In function ‘htvec_irq_dispatch’: drivers/irqchip/irq-loongson-htvec.c:59:3: error: implicit declaration of function ‘spurious_interrupt’; did you mean ‘smp_reboot_interrupt’? [-Werror=implicit-function-declaration] Because spurious_interrupt() only exists on MIPS. So make it MIPS-only. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-05-29irqchip: Add Loongson PCH MSI controllerJiaxun Yang
This controller appears on Loongson LS7A family of PCH to transform interrupts from PCI MSI into HyperTransport vectorized interrrupts and send them to procrssor's HT vector controller. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200528152757.1028711-6-jiaxun.yang@flygoat.com
2020-05-29irqchip: Add Loongson PCH PIC controllerJiaxun Yang
This controller appears on Loongson LS7A family of PCH to transform interrupts from devices into HyperTransport vectorized interrrupts and send them to procrssor's HT vector controller. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200528152757.1028711-4-jiaxun.yang@flygoat.com
2020-05-29irqchip: Add Loongson HyperTransport Vector supportJiaxun Yang
This controller appears on Loongson-3 chips for receiving interrupt vectors from PCH's PIC and PCH's PCIe MSI interrupts. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200528152757.1028711-2-jiaxun.yang@flygoat.com
2020-03-31Merge tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS updates from Thomas Bogendoerfer: - loongson64 irq rework - dmi support loongson - replace setup_irq() by request_irq() - jazz cleanups - minor cleanups and fixes * tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits) MIPS: ralink: mt7621: Fix soc_device introduction MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3 MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC MAINTAINERS: Update Loongson64 entry MIPS: Loongson64: Load built-in dtbs MIPS: Loongson64: Add generic dts dt-bindings: mips: Add loongson boards MIPS: Loongson64: Drop legacy IRQ code dt-bindings: interrupt-controller: Add Loongson-3 HTPIC irqchip: Add driver for Loongson-3 HyperTransport PIC controller dt-bindings: interrupt-controller: Add Loongson LIOINTC irqchip: loongson-liointc: Workaround LPC IRQ Errata irqchip: Add driver for Loongson I/O Local Interrupt Controller docs: mips: remove no longer needed au1xxx_ide.rst documentation MIPS: Alchemy: remove no longer used au1xxx_ide.h header ide: remove no longer used au1xxx-ide driver MIPS: Add support for Desktop Management Interface (DMI) firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START MIPS: ralink: mt7621: introduce 'soc_device' initialization ...
2020-03-25irqchip: Add driver for Loongson-3 HyperTransport PIC controllerJiaxun Yang
This controller appeared on Loongson-3 family of chips to receive interrupts from PCH PIC. It is a I8259 with optimized interrupt polling flow. We can poll interrupt number from HT vector directly but still have to follow standard I8259 routines to mask, unmask and EOI. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25irqchip: Add driver for Loongson I/O Local Interrupt ControllerJiaxun Yang
This controller appeared on Loongson family of chips as the primary package interrupt source. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-08irqchip: Add COMPILE_TEST support for IMX_INTMUXAnson Huang
Add COMPILE_TEST support to IMX_INTMUX driver for better compile testing coverage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1583588547-7164-1-git-send-email-Anson.Huang@nxp.com
2020-01-29irqchip: Some Kconfig cleanup for C-SKYRandy Dunlap
Fixes to Kconfig help text: - spell out "hardware" - fix verb usage Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/d44baeee-cceb-7c02-7249-e6b4817f0847@infradead.org
2020-01-20irqchip: Add NXP INTMUX interrupt multiplexer supportJoakim Zhang
The Interrupt Multiplexer (INTMUX) expands the number of peripherals that can interrupt the core: * The INTMUX has 8 channels that are assigned to 8 NVIC interrupt slots. * Each INTMUX channel can receive up to 32 interrupt sources and has 1 interrupt output. * The INTMUX routes the interrupt sources to the interrupt outputs. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200117060653.27485-3-qiangqing.zhang@nxp.com
2020-01-20irqchip: Define EXYNOS_IRQ_COMBINERHyunki Koo
This patch is written to clean up dependency of ARCH_EXYNOS Not all exynos device have IRQ_COMBINER, especially aarch64 EXYNOS but it is built for all exynos devices. Thus add the config for EXYNOS_IRQ_COMBINER remove direct dependency between ARCH_EXYNOS and exynos-combiner.c and only selected on the aarch32 devices Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191224211108.7128-1-hyunki00.koo@gmail.com
2020-01-20irqchip/sifive-plic: Support irq domain hierarchyYash Shah
Add support for hierarchical irq domains. This is needed as pre-requisite for gpio-sifive driver. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1575976274-13487-4-git-send-email-yash.shah@sifive.com
2019-11-10irqchip: Place CONFIG_SIFIVE_PLIC into the menuJonathan Neuschäfer
Somehow CONFIG_SIFIVE_PLIC ended up outside of the "IRQ chip support" menu. Fixes: 8237f8bc4f6e ("irqchip: add a SiFive PLIC driver") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Palmer Dabbelt <palmer@sifive.com> Link: https://lore.kernel.org/r/20191002144452.10178-1-j.neuschaefer@gmx.net
2019-11-10irqchip: Add support for Layerscape external interrupt linesRasmus Villemoes
The LS1021A allows inverting the polarity of six interrupt lines IRQ[0:5] via the scfg_intpcr register, effectively allowing IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING for those. We just need to check the type, set the relevant bit in INTPCR accordingly, and fixup the type argument before calling the GIC's irq_set_type. In fact, the power-on-reset value of the INTPCR register on the LS1021A is so that all six lines have their polarity inverted. Hence any hardware connected to those lines is unusable without this: If the line is indeed active low, the generic GIC code will reject an irq spec with IRQ_TYPE_LEVEL_LOW, while if the line is active high, we must obviously disable the polarity inversion (writing 0 to the relevant bit) before unmasking the interrupt. Some other Layerscape SOCs (LS1043A, LS1046A) have a similar feature, just with a different number of external interrupt lines (and a different POR value for the INTPCR register). This driver should be prepared for supporting those by properly filling out the device tree node. I have the reference manuals for all three boards, but I've only tested the driver on an LS1021A. Unfortunately, the Kconfig symbol ARCH_LAYERSCAPE only exists on arm64, so do as is done for irq-ls-scfg-msi.c: introduce a new symbol which is set when either ARCH_LAYERSCAPE or SOC_LS1021A is set. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191107122115.6244-3-linux@rasmusvillemoes.dk
2019-08-19irqchip/irq-ingenic-tcu: Fix COMPILE_TEST buildingYueHaibing
While do COMPILE_TEST building, if GENERIC_IRQ_CHIP is not selected, it fails: drivers/irqchip/irq-ingenic-tcu.o: In function `ingenic_tcu_intc_cascade': irq-ingenic-tcu.c:(.text+0x13f): undefined reference to `irq_get_domain_generic_chip' drivers/irqchip/irq-ingenic-tcu.o: In function `ingenic_tcu_irq_init': irq-ingenic-tcu.c:(.init.text+0x97): undefined reference to `irq_generic_chip_ops' irq-ingenic-tcu.c:(.init.text+0xdd): undefined reference to `__irq_alloc_domain_generic_chips' irq-ingenic-tcu.c:(.init.text+0x10b): undefined reference to `irq_get_domain_generic_chip' select GENERIC_IRQ_CHIP to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 9536eba03ec7 ("irqchip: Add irq-ingenic-tcu driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: <jason@lakedaemon.net> Cc: <maz@kernel.org> Cc: <paul@crapouillou.net> Cc: <malat@debian.org> Cc: <linux-kernel@vger.kernel.org> Cc: <linux-mips@vger.kernel.org> Cc: <linux-clk@vger.kernel.org>
2019-08-08irqchip: Add irq-ingenic-tcu driverPaul Cercueil
This driver handles the interrupt controller built in the Timer/Counter Unit (TCU) of the JZ47xx SoCs from Ingenic. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: od@zcrc.me
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 00:03:56 +0000