summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
AgeCommit message (Collapse)Author
2021-04-09drm/amdgpu: split gfx callbacks into ras and non-ras onesHawking Zhang
gfx ras is only available in cerntain ip generations. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: John Clements <John.Clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amdgpu: harvest edc status when connected to host via xGMIDennis Li
When connected to a host via xGMI, system fatal errors may trigger warm reset, driver has no change to query edc status before reset. Therefore in this case, driver should harvest previous error loging registers during boot, instead of only resetting them. v2: 1. IP's ras_manager object is created when its ras feature is enabled, so change to query edc status after amdgpu_ras_late_init called 2. change to enable watchdog timer after finishing gfx edc init Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reivewed-by: Hawking Zhang <hawking.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amdgpu: enable watchdog feature for SQ of aldebaranDennis Li
SQ's watchdog timer monitors forward progress, a mask of which waves caused the watchdog timeout is recorded into ras status registers and then trigger a system fatal error event. v2: 1. change *query_timeout_status to *query_sq_timeout_status. 2. move query_sq_timeout_status into amdgpu_ras_do_recovery. 3. add module parameters to enable/disable fatal error event and modify the watchdog timer. v3: 1. remove unused parameters of *enable_watchdog_timer Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amdgpu: add ras support for gfx of aldebaranDennis Li
add edc counter/status reset and query functions for gfx block of aldebaran. v2: change to clear edc counter explicitly aldebaran hardware will not clear edc counter after driver reading them, so driver should clear them explicitly. Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amdgpu: enable only one high prio compute queueNirmoy Das
For high priority compute to work properly we need to enable wave limiting on gfx pipe. Wave limiting is done through writing into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high priority compute queue to avoid race condition between multiple high priority compute queues writing that register simultaneously. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amdgpu: add amdgpu_gfx_state_change_set() set gfx power change entry (v2)Prike Liang
The new amdgpu_gfx_state_change_set() funtion can support set GFX power change status to D0/D3. v2: squash in warning fix (Alex) Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amdgpu: fix compute queue priority if num_kcq is less than 4Nirmoy Das
Compute queues are configurable with module param, num_kcq. amdgpu_gfx_is_high_priority_compute_queue was setting 1st 4 queues to high priority queue leaving a null drm scheduler in adev->gpu_sched[hw_ip]["normal_prio"].sched if num_kcq < 5. This patch tries to fix it by alternating compute queue priority between normal and high priority. Fixes: 33abcb1f5a1719b1c (drm/amdgpu: set compute queue priority at mqd_init) Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-16drm/amdgpu: move amdgpu_num_kcq handling to a helperAlex Deucher
Add a helper so we can set per asic default values. Also, the module parameter is currently clamped to 8, but clamp it per asic just in case some asics have different limits in the future. Enable the option on gfx6,7 as well for consistency. Acked-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-15drm/amdgpu: add interface for setting MGCG perfmonEvan Quan
Enable Navi1X MGCG perfmon setting. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amdgpu: update athub interrupt harvesting handleStanley.Yang
GCEA/MMHUB EA error should not result to DF freeze, this is fixed in next generation, but for some reasons the GCEA/MMHUB EA error will result to DF freeze in previous generation, diver should avoid to indicate GCEA/MMHUB EA error as hw fatal error in kernel message by read GCEA/MMHUB err status registers. Changed from V1: make query_ras_error_status function more general make read mmhub er status register more friendly Changed from V2: move ras error status query function into do_recovery workqueue Changed from V3: remove useless code from V2, print GCEA error status instance number Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-14drm/amdgpu: add interface amdgpu_gfx_init_spm_golden for Navi1xTianci.Yin
On Navi1x, the SPM golden settings are lost after GFXOFF enter/exit, so reconfiguration is needed. Make the configuration code as an interface for future use. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amdgpu: add read amdgpu_gfxoff status in debugfsJinzhou.Su
Add interface for SMU12 device, used by UMR. v2: fix code style Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-06-03drm/amdgpu: add gfx ip block for sienna_cichlid (v3)Likun Gao
Add support for GC 10.3. v2: Squash in gb_addr_config fix (Alex) v3: Add num_pkrs support (Alex) Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-01drm/amdgpu: Rename amdgpu_gfx_kcq_queue_mask_transform()Yong Zhao
Rename it to amdgpu_queue_mask_bit_to_set_resource_bit() to be more specific about its functionality. KFD will use it later. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-23drm/amdgpu: request reg_val_offs each kiq read regYintian Tao
According to the current kiq read register method, there will be race condition when using KIQ to read register if multiple clients want to read at same time just like the expample below: 1. client-A start to read REG-0 throguh KIQ 2. client-A poll the seqno-0 3. client-B start to read REG-1 through KIQ 4. client-B poll the seqno-1 5. the kiq complete these two read operation 6. client-A to read the register at the wb buffer and get REG-1 value Therefore, use amdgpu_device_wb_get() to request reg_val_offs for each kiq read register. v2: fix the error remove v3: fix the print typo v4: remove unused variables Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-09drm/amdgpu: rework sched_list generationNirmoy Das
Generate HW IP's sched_list in amdgpu_ring_init() instead of amdgpu_ctx.c. This makes amdgpu_ctx_init_compute_sched(), ring.has_high_prio and amdgpu_ctx_init_sched() unnecessary. This patch also stores sched_list for all HW IPs in one big array in struct amdgpu_device which makes amdgpu_ctx_init_entity() much more leaner. v2: fix a coding style issue do not use drm hw_ip const to populate amdgpu_ring_type enum v3: remove ctx reference and move sched array and num_sched to a struct use num_scheds to detect uninitialized scheduler list v4: use array_index_nospec for user space controlled variables fix possible checkpatch.pl warnings Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-09drm/amdgpu: set compute queue priority at mqd_initNirmoy Das
We were changing compute ring priority while rings were being used before every job submission which is not recommended. This patch sets compute queue priority at mqd initialization for gfx8, gfx9 and gfx10. Policy: make queue 0 of each pipe as high priority compute queue High/normal priority compute sched lists are generated from set of high/normal priority compute queues. At context creation, entity of compute queue get a sched list from high or normal priority depending on ctx->priority Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05drm/amdgpu: add reset_ras_error_count function for GFXHawking Zhang
GFX ras error counters are dirty ones after cold reboot Read operation is needed to reset them to 0 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-28drm/amdgpu: Add num_banks and num_ranks to gfx config structureYong Zhao
The two members will be used by KFD later. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amdgpu: provide a generic function interface for reading/writing ↵chen gong
register by KIQ Move amdgpu_virt_kiq_rreg/amdgpu_virt_kiq_wreg function to amdgpu_gfx.c, and rename them to amdgpu_kiq_rreg/amdgpu_kiq_wreg.Make it generic and flexible. Signed-off-by: chen gong <curry.gong@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: implement tlbs invalidate on gfx9 gfx10Alex Sierra
tlbs invalidate pointer function added to kiq_pm4_funcs struct. This way, tlb flush can be done through kiq member. TLBs invalidatation implemented for gfx9 and gfx10. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18amd/amdgpu: add sched array to IPs with multiple run-queuesNirmoy Das
This sched array can be passed on to entity creation routine instead of manually creating such sched array on every context creation. v2: squash in missing break fix Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-22drm/amdgpu/gfx10: fix mqd backup/restore for gfx rings (v2)Xiaojie Yuan
1. no need to allocate an extra member for 'mqd_backup' array 2. backup/restore mqd to/from the correct 'mqd_backup' array slot v2: warning fix (Alex) Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-14Merge v5.4-rc7 into drm-nextDave Airlie
We have the i915 security fixes to backmerge, but first let's clear the decks for other drivers to avoid a bigger mess. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-11-06drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10changzhu
The GRBM register interface is now capable of bursting 1 cycle per register wr->wr, wr->rd much faster than previous muticycle per transaction done interface. This has caused a problem where status registers requiring HW to update have a 1 cycle delay, due to the register update having to go through GRBM. For cp ucode, it has realized dummy read in cp firmware.It covers the use of WAIT_REG_MEM operation 1 case only.So it needs to call gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to update firmware in case firmware is too old to have function to realize dummy read in cp firmware. For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is moved to gfxhub in gfx10. So it needs to add dummy read in driver between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amdgpu: remove unused parameter in amdgpu_gfx_kiq_free_ringNirmoy Das
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amdgpu: return tcc_disabled_mask to userspaceMarek Olšák
UMDs need this for correct programming of harvested chips. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amdgpu: remove ih_info parameter of gfx_ras_late_initTao Zhou
gfx_ras_late_init can get the info by itself Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amdgpu: add common gfx_ras_fini functionTao Zhou
gfx_ras_fini can be shared among all generations of gfx Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amdgpu: move gfx ecc functions to generic gfx fileTao Zhou
gfx ras ecc common functions could be reused among all gfx generations Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-03drm/amdgpu: remove gfx9 NGGMarek Olšák
Never used. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-02drm/amdgpu: return tcc_disabled_mask to userspaceMarek Olšák
UMDs need this for correct programming of harvested chips. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu/gfx: switch to amdgpu_gfx_ras_late_init helper functionHawking Zhang
amdgpu_gfx_ras_late_init is used to init gfx specfic ras debugfs/sysfs node and gfx specific interrupt handler. It can be shared among gfx generations Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-31drm/amdgpu: add RAS callback for gfxDennis Li
Add functions for RAS error inject and query error counter Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-16drm/amd/amdgpu: Add VMID to SRBM debugfs bank selectionTom St Denis
Add 5 bits to the offset for SRBM selection to handle VMIDs. Also update the select_me_pipe_q() callback to also select VMID. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu/gfx10: add special unmap_queues packet for preemptionJack Xiao
CP introduced a special unmap_queues packet for gfx preemtion. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu: Move common code to amdgpu_gfx.cHawking Zhang
move common code to amdgpu_gfx_enable_kcq,so this function can be shared with gfx8 and gfx9 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu: Add common gfx func Disable kcq via kiqRex Zhu
so can be shared with gfx8 and gfx9 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu: Add struct kiq_pm4_funcs into kiq structRex Zhu
kiq can support 4 pm4 scheduler packets set_resource, map_queues, unmap_queues, query_status. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu: rename amdgpu_gfx_compute_mqd_sw_initHawking Zhang
The function now will create mqd bos for both gfx queue and compute queue Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jack Xiao <jack.xiao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu: add helper function for gfx queue/bitmap transitionHawking Zhang
Similar to what we do for compute already. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jack Xiao <jack.xiao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu: acquire available gfx queuesHawking Zhang
currently, amdgpu will owns the first gfx queue of each pipe they are: me:0 pipe:0 queue:0 me:0 pipe:1 queue:0 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jack Xiao <jack.xiao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu: add members in amdgpu_me for gfx queueHawking Zhang
Update the structure for gfx10. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jack Xiao <jack.xiao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu/gfx10: new approach to load gfx10 me fw (v4)Hawking Zhang
gfx10 allows to only upload me jumptable while save the whole me image at gtt memory. v2: program CP_ME_IC_BASE_CNTL to default value v3: switch to use amdgpu_bo_create_reserved to create me fw bo v4: split common code from gfx10 code Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu/gfx10: new approach to load ce fw (v4)Hawking Zhang
gfx10 allows to only upload ce jumptable while save the whole ce image at gtt memory. v2: program CP_CE_IC_BASE_CNTL to default value v3: switch to use amdgpu_bo_create_reserved to create ce fw bo v4: split common code from gfx10 code Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu/gfx10: new approach to load pfp fw (v4)Hawking Zhang
gfx10 allows to only upload pfp jumptable while save the whole pfp image at gtt memory. v2: program CP_PFP_IC_BASE_CNTL to default value v3: switch to use amdgpu_bo_create_reserved to create pfp fw bo v4: split common code from gfx10 code Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu: add gfx10 specific new member pa_sc_tile_steering_overrideHawking Zhang
New gfx config parameter. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-20drm/amdgpu: add gfx10 specific config in amdgpu_gfx_configHawking Zhang
The two members are used to cache the values from gpu_info fw accordingly Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amdgpu: enable ras on gfx9 (v2)Feifei Xu
Register ecc interrupts and ecc interrupt handler on gfx9. Add ras support on gfx9 v2: squash in warning fix Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-09drm/amdgpu: separate amdgpu_rlc into a single fileLikun Gao
Separate the function and struct of RLC from the file of GFX. Abstract the function of amdgpu_gfx_rlc_fini. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-21 06:31:11 +0000