summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)Author
2021-08-24drm/amdgpu: Fix build with missing pm_suspend_target_state module exportBorislav Petkov
Building a randconfig here triggered: ERROR: modpost: "pm_suspend_target_state" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! because the module export of that symbol happens in kernel/power/suspend.c which is enabled with CONFIG_SUSPEND. The ifdef guards in amdgpu_acpi_is_s0ix_supported(), however, test for CONFIG_PM_SLEEP which is defined like this: config PM_SLEEP def_bool y depends on SUSPEND || HIBERNATE_CALLBACKS and that randconfig has: # CONFIG_SUSPEND is not set CONFIG_HIBERNATE_CALLBACKS=y leading to the module export missing. Change the ifdeffery to depend directly on CONFIG_SUSPEND. Fixes: 5706cb3c910c ("drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/YSP6Lv53QV0cOAsd@zn.tnic Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-20drm/amdgpu: Cancel delayed work when GFXOFF is disabledMichel Dänzer
schedule_delayed_work does not push back the work if it was already scheduled before, so amdgpu_device_delay_enable_gfx_off ran ~100 ms after the first time GFXOFF was disabled and re-enabled, even if GFXOFF was disabled and re-enabled again during those 100 ms. This resulted in frame drops / stutter with the upcoming mutter 41 release on Navi 14, due to constantly enabling GFXOFF in the HW and disabling it again (for getting the GPU clock counter). To fix this, call cancel_delayed_work_sync when the disable count transitions from 0 to 1, and only schedule the delayed work on the reverse transition, not if the disable count was already 0. This makes sure the delayed work doesn't run at unexpected times, and allows it to be lock-free. v2: * Use cancel_delayed_work_sync & mutex_trylock instead of mod_delayed_work. v3: * Make amdgpu_device_delay_enable_gfx_off lock-free (Christian König) v4: * Fix race condition between amdgpu_gfx_off_ctrl incrementing adev->gfx.gfx_off_req_count and amdgpu_device_delay_enable_gfx_off checking for it to be 0 (Evan Quan) Cc: stable@vger.kernel.org Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> # v3 Acked-by: Christian König <christian.koenig@amd.com> # v3 Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-20drm/amdgpu: use the preferred pin domain after the checkChristian König
For some reason we run into an use case where a BO is already pinned into GTT, but should be pinned into VRAM|GTT again. Handle that case gracefully as well. Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-18drm/amd/display: Use DCN30 watermark calc for DCN301Zhan Liu
[why] dcn301_calculate_wm_and_dl() causes flickering when external monitor is connected. This issue has been fixed before by commit 0e4c0ae59d7e ("drm/amdgpu/display: drop dcn301_calculate_wm_and_dl for now"), however part of the fix was gone after commit 2cbcb78c9ee5 ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next"). [how] Use dcn30_calculate_wm_and_dlg() instead as in the original fix. Fixes: 2cbcb78c9ee5 ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next") Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Tested-by: Zhan Liu <zhan.liu@amd.com> Tested-by: Oliver Logush <oliver.logush@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: Ensure DCN save after VM setupJake Wang
[Why] DM initializes VM context after DMCUB initialization. This results in loss of DCN_VM_CONTEXT registers after z10. [How] Notify DMCUB when VM setup is complete, and have DMCUB save init registers. v2: squash in CONFIG_DRM_AMD_DC_DCN3_1 fix Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amdkfd: fix random KFDSVMRangeTest.SetGetAttributesTest test failureYifan Zhang
KFDSVMRangeTest.SetGetAttributesTest randomly fails in stress test. Note: Google Test filter = KFDSVMRangeTest.* [==========] Running 18 tests from 1 test case. [----------] Global test environment set-up. [----------] 18 tests from KFDSVMRangeTest [ RUN ] KFDSVMRangeTest.BasicSystemMemTest [ OK ] KFDSVMRangeTest.BasicSystemMemTest (30 ms) [ RUN ] KFDSVMRangeTest.SetGetAttributesTest [ ] Get default atrributes /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure Value of: expectedDefaultResults[i] Actual: 4294967295 Expected: outputAttributes[i].value Which is: 0 /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:154: Failure Value of: expectedDefaultResults[i] Actual: 4294967295 Expected: outputAttributes[i].value Which is: 0 /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDSVMRangeTest.cpp:152: Failure Value of: expectedDefaultResults[i] Actual: 4 Expected: outputAttributes[i].type Which is: 2 [ ] Setting/Getting atrributes [ FAILED ] the root cause is that svm work queue has not finished when svm_range_get_attr is called, thus some garbage svm interval tree data make svm_range_get_attr get wrong result. Flush work queue before iterate svm interval tree. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/pm: change the workload type for some cardsKenneth Feng
change the workload type for some cards as it is needed. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16Revert "drm/amd/pm: fix workload mismatch on vega10"Kenneth Feng
This reverts commit 0979d43259e13846d86ba17e451e17fec185d240. Revert this because it does not apply to all the cards. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-10drm/amd/display: use GFP_ATOMIC in amdgpu_dm_irq_schedule_workAnson Jacob
Replace GFP_KERNEL with GFP_ATOMIC as amdgpu_dm_irq_schedule_work can't sleep. BUG: sleeping function called from invalid context at include/linux/sched/mm.h:196 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 253, name: kworker/6:1H CPU: 6 PID: 253 Comm: kworker/6:1H Tainted: G W OE 5.11.0-promotion_2021_06_07-18_36_28_prelim_revert_retrain #8 Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021 Workqueue: events_highpri dm_irq_work_func [amdgpu] Call Trace: <IRQ> dump_stack+0x5e/0x74 ___might_sleep.cold+0x87/0x98 __might_sleep+0x4b/0x80 kmem_cache_alloc_trace+0x390/0x4f0 amdgpu_dm_irq_handler+0x171/0x230 [amdgpu] amdgpu_irq_dispatch+0xc0/0x1e0 [amdgpu] amdgpu_ih_process+0x81/0x100 [amdgpu] amdgpu_irq_handler+0x26/0xa0 [amdgpu] __handle_irq_event_percpu+0x49/0x190 ? __hrtimer_get_next_event+0x4d/0x80 handle_irq_event_percpu+0x33/0x80 handle_irq_event+0x33/0x60 handle_edge_irq+0x82/0x190 asm_call_irq_on_stack+0x12/0x20 </IRQ> common_interrupt+0xbb/0x140 asm_common_interrupt+0x1e/0x40 RIP: 0010:amdgpu_device_rreg.part.0+0x44/0xf0 [amdgpu] Code: 53 48 89 fb 4c 3b af c8 08 00 00 73 6d 83 e2 02 75 0d f6 87 40 62 01 00 10 0f 85 83 00 00 00 4c 03 ab d0 08 00 00 45 8b 6d 00 <8b> 05 3e b6 52 00 85 c0 7e 62 48 8b 43 08 0f b7 70 3e 65 8b 05 e3 RSP: 0018:ffffae7740fff9e8 EFLAGS: 00000286 RAX: ffffffffc05ee610 RBX: ffff8aaf8f620000 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000005430 RDI: ffff8aaf8f620000 RBP: ffffae7740fffa08 R08: 0000000000000001 R09: 000000000000000a R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000005430 R13: 0000000071000000 R14: 0000000000000001 R15: 0000000000005430 ? amdgpu_cgs_write_register+0x20/0x20 [amdgpu] amdgpu_device_rreg+0x17/0x20 [amdgpu] amdgpu_cgs_read_register+0x14/0x20 [amdgpu] dm_read_reg_func+0x38/0xb0 [amdgpu] generic_reg_wait+0x80/0x160 [amdgpu] dce_aux_transfer_raw+0x324/0x7c0 [amdgpu] dc_link_aux_transfer_raw+0x43/0x50 [amdgpu] dm_dp_aux_transfer+0x87/0x110 [amdgpu] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] drm_dp_get_one_sb_msg+0x349/0x480 [drm_kms_helper] drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper] ? drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper] dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu] ? dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu] handle_hpd_rx_irq+0x195/0x240 [amdgpu] ? __switch_to_asm+0x42/0x70 ? __switch_to+0x131/0x450 dm_irq_work_func+0x19/0x20 [amdgpu] process_one_work+0x209/0x400 worker_thread+0x4d/0x3e0 ? cancel_delayed_work+0xa0/0xa0 kthread+0x124/0x160 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-10drm/amd/display: Remove invalid assert for ODM + MPC caseEric Bernstein
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-10drm/amd/pm: bug fix for the runtime pm BACOKenneth Feng
In some systems only MACO is supported. This is to fix the problem that runtime pm is enabled but BACO is not supported. MACO will be handled seperately. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-10drm/amdgpu: handle VCN instances when harvesting (v2)Alex Deucher
There may be multiple instances and only one is harvested. v2: fix typo in commit message Fixes: 83a0b8639185 ("drm/amdgpu: add judgement when add ip blocks (v2)") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1673 Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-06drm/amdgpu: Add preferred mode in modeset when freesync video mode's enabled.Solomon Chiu
[Why] With kernel module parameter "freesync_video" is enabled, if the mode is changed to preferred mode(the mode with highest rate), then Freesync fails because the preferred mode is treated as one of freesync video mode, and then be configurated as freesync video mode(fixed refresh rate). [How] Skip freesync fixed rate configurating when modeset to preferred mode. Signed-off-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-06drm/amd/pm: Fix a memory leak in an error handling path in ↵Christophe JAILLET
'vangogh_tables_init()' 'watermarks_table' must be freed instead 'clocks_table', because 'clocks_table' is known to be NULL at this point and 'watermarks_table' is never freed if the last kzalloc fails. Fixes: c98ee89736b8 ("drm/amd/pm: add the fine grain tuning function for vangogh") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amdgpu: don't enable baco on boco platforms in runpmAlex Deucher
If the platform uses BOCO, don't use BACO in runtime suspend. We could end up executing the BACO path if the platform supports both. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1669 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-06drm/amdgpu: set RAS EEPROM address from VBIOSJohn Clements
update to latest atombios fw table [Backport to 5.14 - Alex] Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1670 Signed-off-by: John Clements <john.clements@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-06drm/amd/pm: update smu v13.0.1 firmware headerXiaomeng Hou
Update smu v13.0.1 firmware header for yellow carp. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amdgpu: add DID for beige gobyChengming Gui
Add device ids. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amdgpu/display: fix DMUB firmware version infoShirish S
DMUB firmware info is printed before it gets initialized. Correct this order to ensure true value is conveyed. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-05drm/amd/display: workaround for hard hang on HPD on native DPQingqing Zhuo
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enable, causing DMUB to access an unresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off on native DP. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4Jude Shih
[Why] On S4 resume we also need to fix detection of when to reload DMCUB firmware because we're currently using the VBIOS version which isn't compatible with the driver version. [How] Update the hardware init check for DCN31 since it's the ASIC that has this issue. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jude Shih <jude.shih@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Increase stutter watermark for dcn303Bing Guo
[Why&How] Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent underflow in certain modes. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1XBing Guo
Why: In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X by the number of pipes ODM Combined. How: Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the number of pipes ODM Combined. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Assume LTTPR interop for DCN31+Wesley Chalmers
[WHY] For DCN31 onward, LTTPR is to be enabled and set to Transparent by VBIOS. Driver is to assume that VBIOS has done this without needing to check the VBIOS interop bit. [HOW] Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the interop bit to true for DCN31+. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amdgpu: fix checking pmops when PM_SLEEP is not enabledRandy Dunlap
'pm_suspend_target_state' is only available when CONFIG_PM_SLEEP is set/enabled. OTOH, when both SUSPEND and HIBERNATION are not set, PM_SLEEP is not set, so this variable cannot be used. ../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: In function ‘amdgpu_acpi_is_s0ix_active’: ../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:1046:11: error: ‘pm_suspend_target_state’ undeclared (first use in this function); did you mean ‘__KSYM_pm_suspend_target_state’? return pm_suspend_target_state == PM_SUSPEND_TO_IDLE; ^~~~~~~~~~~~~~~~~~~~~~~ __KSYM_pm_suspend_target_state Also use shorter IS_ENABLED(CONFIG_foo) notation for checking the 2 config symbols. Fixes: 91e273712ab8dd ("drm/amdgpu: Check pmops for desired suspend state") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-next@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-05drm/amd/pm: update yellow carp pmfw interface versionXiaomeng Hou
Correct yellow carp driver-PMFW interface version to v4. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-30drm/amdgpu: fix the doorbell missing when in CGPG issue for renoir.Yifan Zhang
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-30drm/amdgpu: Fix out-of-bounds read when update mappingxinhui pan
If one GTT BO has been evicted/swapped out, it should sit in CPU domain. TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node for sysMem. Now when we update mapping for such invalidated BOs, we might walk out of bounds of struct ttm_resource. Three possible fix: 1) Let sysMem manager alloc struct ttm_range_mgr_node, like ttm_range_manager does. 2) Pass pages_addr to update_mapping function too, but need memset pages_addr[] to zero when unpopulate. 3) Init amdgpu_res_cursor directly. bug is detected by kfence. ================================================================== BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0 Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-#167): amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x282/0xa40 [amdgpu] amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu] amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu] amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu] drm_ioctl_kernel+0xf3/0x180 [drm] drm_ioctl+0x2cb/0x550 [drm] amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu] kfence-#167 [0x000000008e11c055-0x000000001f676b3e ttm_sys_man_alloc+0x35/0x80 [ttm] ttm_resource_alloc+0x39/0x50 [ttm] ttm_bo_swapout+0x252/0x5a0 [ttm] ttm_device_swapout+0x107/0x180 [ttm] ttm_global_swapout+0x6f/0x130 [ttm] ttm_tt_populate+0xb1/0x2a0 [ttm] ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm] ttm_mem_evict_first+0x59d/0x9c0 [ttm] ttm_bo_mem_space+0x39f/0x400 [ttm] ttm_bo_validate+0x13c/0x340 [ttm] ttm_bo_init_reserved+0x269/0x540 [ttm] amdgpu_bo_create+0x1d1/0xa30 [amdgpu] amdgpu_bo_create_user+0x40/0x80 [amdgpu] amdgpu_gem_object_create+0x71/0xc0 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] kfd_ioctl+0x461/0x690 [amdgpu] Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amdgpu/display: only enable aux backlight control for OLED panelsAlex Deucher
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho <Camille.Cho@amd.com> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: ensure dentist display clock update finished in DCN20Dale Zhao
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by: Cyr Aric <aric.cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-27drm/amd/display: Add missing DCN21 IP parameterVictor Lu
[why] IP parameter min_meta_chunk_size_bytes is read for bandwidth calculations but it was never defined. [how] Define min_meta_chunk_size_bytes and initialize value to 256. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Guard DST_Y_PREFETCH register overflow in DCN21Victor Lu
[why] DST_Y_PREFETCH can overflow when DestinationLinesForPrefetch values are too large due to the former being limited to 8 bits. [how] Set the maximum value of DestinationLinesForPrefetch to be 255 * refclk period. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amdgpu: Check pmops for desired suspend statePratik Vishwakarma
[Why] User might change the suspend behaviour from OS. [How] Check with pm for target suspend state and set s0ix flag only for s2idle state. v2: User might change default suspend state, use target state v3: squash in build fix Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-26drm/amdgpu: Avoid printing of stack contents on firmware load errorJiri Kosina
In case when psp_init_asd_microcode() fails to load ASD microcode file, psp_v12_0_init_microcode() tries to print the firmware filename that failed to load before bailing out. This is wrong because: - the firmware filename it would want it print is an incorrect one as psp_init_asd_microcode() and psp_v12_0_init_microcode() are loading different filenames - it tries to print fw_name, but that's not yet been initialized by that time, so it prints random stack contents, e.g. amdgpu 0000:04:00.0: Direct firmware load for amdgpu/renoir_asd.bin failed with error -2 amdgpu 0000:04:00.0: amdgpu: fail to initialize asd microcode amdgpu 0000:04:00.0: amdgpu: psp v12.0: Failed to load firmware "\xfeTO\x8e\xff\xff" Fix that by bailing out immediately, instead of priting the bogus error message. Reported-by: Vojtech Pavlik <vojtech@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-26drm/amdgpu: Fix resource leak on probe error pathJiri Kosina
This reverts commit 4192f7b5768912ceda82be2f83c87ea7181f9980. It is not true (as stated in the reverted commit changelog) that we never unmap the BAR on failure; it actually does happen properly on amdgpu_driver_load_kms() -> amdgpu_driver_unload_kms() -> amdgpu_device_fini() error path. What's worse, this commit actually completely breaks resource freeing on probe failure (like e.g. failure to load microcode), as amdgpu_driver_unload_kms() notices adev->rmmio being NULL and bails too early, leaving all the resources that'd normally be freed in amdgpu_acpi_fini() and amdgpu_device_fini() still hanging around, leading to all sorts of oopses when someone tries to, for example, access the sysfs and procfs resources which are still around while the driver is gone. Fixes: 4192f7b57689 ("drm/amdgpu: unmap register bar on device init failure") Reported-by: Vojtech Pavlik <vojtech@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-23Merge tag 'drm-misc-fixes-2021-07-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * Return -ENOTTY for non-DRM ioctls * amdgpu: Fix COW checks * nouveau: init BO GME fields * panel: Avoid double free * ttm: Fix refcounting in ttm_global_init(); NULL checks * vc4: Fix interrupt handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YPlbkmH6S4VAHP9j@linux-uq9g.fritz.box
2021-07-21drm/amdgpu - Corrected the video codecs array name for yellow carpVeerabadhran Gopalakrishnan
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Fix ASSR regression on embedded panelsStylon Wang
[Why] Regression found in some embedded panels traces back to the earliest upstreamed ASSR patch. The changed code flow are causing problems with some panels. [How] - Change ASSR enabling code while preserving original code flow as much as possible - Simplify the code on guarding with internal display flag Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-21drm/amdgpu: add yellow carp pci id (v2)Aaron Liu
Add Yellow Carp PCI id support. v2: add another DID Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amdgpu: update yellow carp external rev_id handlingAaron Liu
0x1681 has a different external revision id. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/pm: Support board calibration on aldebaranLijo Lazar
Add support for board power calibration on Aldebaran. Board calibration is done after DC offset calibration. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: change zstate allow msg conditionEric Yang
[Why] PMFW message which previously thought to only control Z9 controls both Z9 and Z10. Also HW design team requested that Z9 must only be supported on eDP due to content protection interop. [How] Change zstate support condition to match updated policy Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Populate dtbclk entries for dcn3.02/3.03Bindu Ramamurthy
[Why] Populate dtbclk values from bwparams for dcn302, dcn303. [How] dtbclk values are fetched from bandwidthparams for all DPM levels and for DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Line Buffer changesNevenko Stupar
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines of 4K resolution lines to 5 lines of 4K resolution lines. All Line Buffer can be used as extended memory for P State change latency hiding. The maximum number of lines is increased to 32 lines. Finally, LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB memory piece 2) are not affected, no change in size, only 3 pieces is affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0 and LB_MEMORY_CONFIG_3 (for 4:2:0) modes. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Remove MALL function from DCN3.1Mikita Lipski
[why] DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to DMUB just remove the function pointer. [how] Remove apply_idle_power_optimizations from function pointers structure for DCN31 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Only set default brightness for OLEDCamille Cho
[Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Update bounding box for DCN3.1Nicholas Kazlauskas
[Why & How] We're missing a default value for dram_channel_width_bytes in the DCN3.1 SOC bounding box and we don't currently have the interface in place to query the actual value from VBIOS. Put in a hardcoded default until we have the interface in place. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Query VCO frequency from register for DCN3.1Nicholas Kazlauskas
[Why] Hardcoding the VCO frequency isn't correct since we don't own or control the value. In the case where the hardcode is also missing we can't lightup display. [How] Query from the CLK register instead. Update the DFS frequency to be able to compute the VCO frequency. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Populate socclk entries for dcn3.02/3.03Bindu Ramamurthy
[Why] Initialize socclk entries in bandwidth params for dcn302, dcn303. [How] Fetch the sockclk values from smu for the DPM levels and for the DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Fix max vstartup calculation for modes with bordersNicholas Kazlauskas
[Why] Vertical and horizontal borders in timings are treated as increasing the active area - vblank and hblank actually shrink. Our input into DML does not include these borders so it incorrectly assumes it has more time than available for vstartup and tmdl calculations for some modes with borders. An example of such a timing would be 640x480@72Hz: h_total: 832 h_border_left: 8 h_addressable: 640 h_border_right: 8 h_front_porch: 16 h_sync_width: 40 v_total: 520 v_border_top: 8 v_addressable: 480 v_border_bottom: 8 v_front_porch: 1 v_sync_width: 3 pix_clk_100hz: 315000 [How] Include borders as part of destination vactive/hactive. This change DCN20+ so it has wide impact, but the destination vactive and hactive are only really used for vstartup calculation anyway. Most modes do not have vertical or horizontal borders. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 13:36:41 +0000