summaryrefslogtreecommitdiff
path: root/drivers/clk/imx/clk-imx8mq.c
AgeCommit message (Collapse)Author
2021-06-14clk: imx8mq: remove SYS PLL 1/2 clock gatesLucas Stach
Remove the PLL clock gates as the allowing to gate the sys1_pll_266m breaks the uSDHC module which is sporadically unable to enumerate devices after this change. Also it makes AMP clock management harder with no obvious benefit to Linux, so just revert the change. Link: https://lore.kernel.org/r/20210528180135.1640876-1-l.stach@pengutronix.de Fixes: b04383b6a558 ("clk: imx8mq: Define gates for pll1/2 fixed dividers") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-04-04clk: imx8mq: Correct the pcie1 selsRichard Zhu
- The sys2_pll_50m should be one of the clock sels of PCIE_AUX clock. Change the sys2_pll_500m to sys2_pll_50m. - Correct one misspell of the imx8mq_pcie1_ctrl_sels definition, from "sys2_pll_250m" to "sys2_pll_333m". Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-04-04clk: imx: Fix reparenting of UARTs not associated with stdoutAdam Ford
Most if not all i.MX SoC's call a function which enables all UARTS. This is a problem for users who need to re-parent the clock source, because any attempt to change the parent results in an busy error due to the fact that the clocks have been enabled already. clk: failed to reparent uart1 to sys_pll1_80m: -16 Instead of pre-initializing all UARTS, scan the device tree to see which UART clocks are associated to stdout, and only enable those UART clocks if it's needed early. This will move initialization of the remaining clocks until after the parenting of the clocks. When the clocks are shutdown, this mechanism will also disable any clocks that were pre-initialized. Fixes: 9461f7b33d11c ("clk: fix CLK_SET_RATE_GATE with clock rate protection") Suggested-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-01-30clk: imx8mq: add PLL monitor outputLucas Stach
The PLL monitor is mentioned as a debug feature in the reference manual, but there are some boards that use this clock output as a reference clock for board level components. Add support for those clocks in the clock driver, so this clock output can be used properly. Note that the VIDEO1, GPU and VPU mux inputs are rotated compared to the description in the reference manual. The order in this patch has been empirically validated. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-12-21Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...
2020-11-10clk: imx8mq: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF && !CONFIG_MODULES): drivers/clk/imx/clk-imx8mq.c:626:34: warning: ‘imx8mq_clk_of_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-04clk: imx8m: fix bus critical clk registrationPeng Fan
noc/axi/ahb are bus clk, not peripheral clk. Since peripheral clk has a limitation that for peripheral clock slice, IP clock slices must be stopped to change the clock source. However if the bus clk is marked as critical clk peripheral, the assigned clock parent operation will fail. So we added CLK_SET_PARENT_GATE flag to avoid glitch. And add imx8m_clk_hw_composite_bus_critical for bus critical clock usage Fixes: 936c383673b9e ("clk: imx: fix composite peripheral flags") Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Reported-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1604229834-25594-1-git-send-email-peng.fan@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-20clk: imx8mq: Fix usdhc parents orderAbel Vesa
According to the latest RM (see Table 5-1. Clock Root Table), both usdhc root clocks have the parent order as follows: 000 - 25M_REF_CLK 001 - SYSTEM_PLL1_DIV2 010 - SYSTEM_PLL1_CLK 011 - SYSTEM_PLL2_DIV2 100 - SYSTEM_PLL3_CLK 101 - SYSTEM_PLL1_DIV3 110 - AUDIO_PLL2_CLK 111 - SYSTEM_PLL1_DIV8 So the audio_pll2_out and sys3_pll_out have to be swapped. Fixes: b80522040cd3 ("clk: imx: Add clock driver for i.MX8MQ CCM") Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reported-by: Cosmin Stefan Stoica <cosmin.stoica@nxp.com> Link: https://lore.kernel.org/r/1602753944-30757-1-git-send-email-abel.vesa@nxp.com Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-08-22clk: imx8m: Support module buildAnson Huang
Change configuration to "tristate", add module author, description and license to support building i.MX8M SoCs clock driver as module. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-21clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slicePeng Fan
Switch the bus clk use imx8m_clk_hw_composite_bus, then we could avoid possible issue when setting mux of the clk. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20clk: imx8m: migrate A53 clk root to use composite corePeng Fan
Migrate A53 clk root to use composite core clk type. It will simplify code and make it easy to use composite specific mux operation. Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20clk: imx8m: drop clk_hw_set_parent for A53Peng Fan
The parent settings have been moved to dtsi, we no need to set parent here. And clk_hw_set_parent will trigger lockdep warning, because this api not have prepare_lock. Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11clk: imx8mq: A53 core clock no need to be criticalAnson Huang
'A53_CORE' is just a mux and no need to be critical, being critical will cause its parent clock always ON which does NOT make sense, to make sure CPU's hardware clock source NOT being disabled during clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent operations to after critical clock 'ARM_CLK' setup finished. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24clk: imx: imx8mq: fix a53 cpu clockPeng Fan
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root signoff timing is 1Ghz, however the A53 core which sources from CCM root could run above 1GHz which violates the CCM. There is a CORE_SEL slice before A53 core, we need to configure the CORE_SEL slice source from ARM PLL, not A53 CCM clk root. The A53 CCM clk root should only be used when need to change ARM PLL frequency. Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out. Configure a53 ccm root sources from 800MHz sys pll Configure a53 core sources from arm_pll_out Mark arm_a53_core as critical clock Fixes: db27e40b27f1 ("clk: imx8mq: Add the missing ARM clock") Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx8mq: Add missing of_node_put()Anson Huang
After finishing using device node got from of_find_compatible_node(), of_node_put() needs to be called. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17clk: imx: Include clk-provider.h instead of clk.h for i.MX8M SoCs clock driverAnson Huang
The i.MX8M SoCs clock driver are provider, NOT consumer, so clk-provider.h should be used instead of clk.h. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-14clk: imx: imx8mq: use imx8m_clk_hw_composite_corePeng Fan
Use imx8m_clk_hw_composite_core to simplify code. Add new definitions, and X_SRC/CG/DIV will be alias to the new definitions for backwards compatibility Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-23clk: imx: imx8mq: Switch to clk_hw based APIPeng Fan
Switch the entire clk-imx8mq driver to clk_hw based API. This allows us to move closer to a clear split between consumer and provider clk APIs. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11clk: imx: Rename the SCCG to SSCGAbel Vesa
According to the manual the acronym stands for Spread Sprectum Clock Generator. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx8m: Suppress bind attrsLeonard Crestez
The clock drivers on imx8m series are registered as platform devices and this opens the possibility of reloading the driver at runtime. This doesn't actually work: clocks are never removed and attempting to bind again results in registration errors and a crash. Almost all devices depend on clocks anyway so rebinding is unlikely to ever be useful Fix this by explicitly suppressing bind attrs like several other clock drivers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx8m: Set CLK_GET_RATE_NOCACHE on dram clocksLeonard Crestez
These clocks are only modified as part of DRAM frequency switches during which DRAM itself is briefly inaccessible. The switch is performed with a SMC call to by TF-A which runs from a SRAM area; upon returning to linux several clocks bits are modified and we need to update them. For rate bits an easy solution is to just mark with CLK_GET_RATE_NOCACHE so that new rates are always read back from registers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04clk: imx: imx8mq: fix sys3_pll_out_selsPeng Fan
It is not correct that sys3_pll_out use sys2_pll1_ref_sel as parent. According to the current imx_clk_sccg_pll design, it uses both bypass1/2, however set bypass2 as 1 is not correct, because it will make sys[x]_pll_out use wrong parent and might access wrong registers. So correct bypass2 to 0 and fix sys3_pll_out_sels. Fixes: e9dda4af685f ("clk: imx: Refactor entire sccg pll clk") Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx: imx8mq: mark sys1/2_pll as fixed clockPeng Fan
According Architecture definition guide, SYS1_PLL is fixed at 800MHz, SYS2_PLL is fixed at 1000MHz, so let's use imx_clk_fixed to register the clocks and drop code that could change the rate. Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25clk: imx8mq: Define gates for pll1/2 fixed dividersLeonard Crestez
On imx8mq there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate but these gates are not currently defined in the clock tree. Add them between sys1/2_pll_out and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14clk: imx8mq: Add VIDEO2_PLL clockLaurentiu Palcu
This clock is needed by DCSS when high resolutions are used. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> CC: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19clk: imx8mq: Fix sys3 pll referencesLeonard Crestez
The "sys3_pll2_out" CLK was removed in refactoring so all references need to be updated to "sys3_pll_out" Fixes: e9dda4af685f ("clk: imx: Refactor entire sccg pll clk") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12clk: imx8mq: Unregister clks when of_clk_add_provider failedAnson Huang
When of_clk_add_provider failed, all clks should be unregistered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mq: Mark AHB clock as criticalAbel Vesa
Initially, the TMU_ROOT clock was marked as critical, which automatically made the AHB clock to stay always on. Since the TMU_ROOT clock is not marked as critical anymore, following commit: "clk: imx8mq: Remove CLK_IS_CRITICAL flag for IMX8MQ_CLK_TMU_ROOT" all the clocks that derive from ipg_root clock (and implicitly ahb clock) would also have to enable, along with their own gate, the AHB clock. But considering that AHB is actually a bus that has to be always on, we mark it as critical in the clock provider driver and then all the clocks that derive from it can be controlled through the dedicated per IP gate which follows after the ipg_root clock. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mq: set correct parent for usb ctrl clocksLi Jun
Per latest imx8mq datasheet of CCM, the parent of usb1_ctrl_root_clk and usb2_ctrl_root_clk is usb_bus. Signed-off-by: Li Jun <jun.li@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03clk: imx8mq: Remove CLK_IS_CRITICAL flag for IMX8MQ_CLK_TMU_ROOTAnson Huang
IMX8MQ_CLK_TMU_ROOT is ONLY used for thermal module, the driver should manage this clock, so no need to have CLK_IS_CRITICAL flag set. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-24clk: imx8mq: Keep uart clocks on during system bootAnson Huang
Call imx_register_uart_clocks() API to keep uart clocks enabled when earlyprintk or earlycon is active. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-18clk: imx8mq: Use devm_platform_ioremap_resource() instead of of_iomap()Anson Huang
i.MX8MQ clock driver uses platform driver model, better to use devm_platform_ioremap_resource() instead of of_iomap() to get IO base. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-18clk: imx8mq: Use imx_check_clocks() API directlyAnson Huang
Use imx_check_clocks() API to check clocks directly. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-23clk: imx8m: Add GIC clockLeonard Crestez
This is documented in the reference manuals as GIC_CLK_ROOT. In some out-of-tree DVFS scenarios the gic clock can end up as the only user of sys_pll2 so if we don't define the gic clk explicitly it might be turned off. This applies to both 8mq and 8mm: same clk register but diffferent parents. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-22clk: imx8mq: add SNVS clock to clock treeAnson Huang
i.MX8MQ has clock gate for SNVS module, add it into clock tree for SNVS RTC driver to manage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-02clk: imx8mq: Add dsi_ipg_divGuido Günther
It's defined in imx8mq-clock.h but wasn't assigned yet. It's used as clk_tx_esc in the nwl dsi host controller (i.MX8MQ RM, Rev. 0, 01/2018 Sect. 13.5.3.7.4). Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-28clk: imx8mq: add GPIO clocks to clock treeAnson Huang
i.MX8MQ has clock gate for each GPIO bank, add them into clock tree for GPIO driver to manage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: imx: Refactor entire sccg pll clkAbel Vesa
Make the entire combination of plls to be one single clock. The parents used for bypasses are specified each as an index in the parents list. The determine_rate does a lookup throughout all the possible combinations for all the divs and returns the best possible 'setup' which in turn is used by set_rate later to set up all the divs and bypasses. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx8mq: Add the missing ARM clockAbel Vesa
Add the ARM clock as imx_clk_cpu type. Will be used by cpufreq. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: imx8mq: Fix the rate propagation for arm pllAbel Vesa
The arm pll bypass needs to propagate the rate upwards in order for the cpufreq to work. Fixes: b80522040cd3f ("clk: imx: Add clock driver for i.MX8MQ CCM") Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx8mq: Add support for the CLKO1 clockFabio Estevam
Add the entry for the CLKO1 clock. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx8mq: Fix the CLKO2 source select listFabio Estevam
The CLKO2 clock source select list is the following as per the i.MX8M Reference Manual: 000 - 25M_REF_CLK 001 - SYSTEM_PLL2_DIV5 010 - SYSTEM_PLL1_DIV2 011 - SYSTEM_PLL2_DIV6 100 - SYSTEM_PLL3_CLK 101 - AUDIO_PLL1_CLK 110 - VIDEO_PLL1_CLK 111 - 32K_REF_CLK However, in imx8mq_clko2_sels[] only the first four entries are correct. Fix it by adding the missing "sys3_pll2_out" entry in order to match the description from the manual. Fixes: b80522040cd3f ("clk: imx: Add clock driver for i.MX8MQ CCM") Reported-by: Rogerio Pimentel <rogerio.silva@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx8mq: Add missing M4 clocksCarlo Caione
The clocks list is missing the clocks for the M4 core. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx8mq: Make parent names arrays const pointersAbel Vesa
The arrays containing the mux selectors need to be of const pointer to const char. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03clk: imx: Add clock driver for i.MX8MQ CCMAbel Vesa
Add driver for the Clock Control Module found on i.MX8MQ. Signed-off-by: Anson Huang <anson.huang@nxp.com> Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 06:46:07 +0000