summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/card/block.c8
-rw-r--r--drivers/mmc/core/core.c98
-rw-r--r--drivers/mmc/core/mmc.c12
-rw-r--r--drivers/mmc/host/mxcmmc.c1
-rw-r--r--drivers/mmc/host/omap_hsmmc.c7
-rw-r--r--drivers/mmc/host/sdhci-cns3xxx.c1
-rw-r--r--drivers/mmc/host/sdhci-s3c.c2
-rw-r--r--drivers/mmc/host/sh_mmcif.c2
-rw-r--r--drivers/mmc/host/tmio_mmc_pio.c2
9 files changed, 89 insertions, 44 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index a1cb21f95302..1e0e27cbe987 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1606,6 +1606,14 @@ static const struct mmc_fixup blk_fixups[] =
MMC_QUIRK_BLK_NO_CMD23),
MMC_FIXUP("MMC32G", 0x11, CID_OEMID_ANY, add_quirk_mmc,
MMC_QUIRK_BLK_NO_CMD23),
+
+ /*
+ * Some Micron MMC cards needs longer data read timeout than
+ * indicated in CSD.
+ */
+ MMC_FIXUP(CID_NAME_ANY, 0x13, 0x200, add_quirk_mmc,
+ MMC_QUIRK_LONG_READ_TIME),
+
END_FIXUP
};
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 5278ffb20e74..950b97d7412a 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -529,6 +529,18 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
data->timeout_clks = 0;
}
}
+
+ /*
+ * Some cards require longer data read timeout than indicated in CSD.
+ * Address this by setting the read timeout to a "reasonably high"
+ * value. For the cards tested, 300ms has proven enough. If necessary,
+ * this value can be increased if other problematic cards require this.
+ */
+ if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
+ data->timeout_ns = 300000000;
+ data->timeout_clks = 0;
+ }
+
/*
* Some cards need very high timeouts if driven in SPI mode.
* The worst observed timeout was 900ms after writing a
@@ -1213,6 +1225,46 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
mmc_host_clk_release(host);
}
+static void mmc_poweroff_notify(struct mmc_host *host)
+{
+ struct mmc_card *card;
+ unsigned int timeout;
+ unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION;
+ int err = 0;
+
+ card = host->card;
+
+ /*
+ * Send power notify command only if card
+ * is mmc and notify state is powered ON
+ */
+ if (card && mmc_card_mmc(card) &&
+ (card->poweroff_notify_state == MMC_POWERED_ON)) {
+
+ if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
+ notify_type = EXT_CSD_POWER_OFF_SHORT;
+ timeout = card->ext_csd.generic_cmd6_time;
+ card->poweroff_notify_state = MMC_POWEROFF_SHORT;
+ } else {
+ notify_type = EXT_CSD_POWER_OFF_LONG;
+ timeout = card->ext_csd.power_off_longtime;
+ card->poweroff_notify_state = MMC_POWEROFF_LONG;
+ }
+
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_POWER_OFF_NOTIFICATION,
+ notify_type, timeout);
+
+ if (err && err != -EBADMSG)
+ pr_err("Device failed to respond within %d poweroff "
+ "time. Forcefully powering down the device\n",
+ timeout);
+
+ /* Set the card state to no notification after the poweroff */
+ card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
+ }
+}
+
/*
* Apply power to the MMC stack. This is a two-stage process.
* First, we enable power to the card without the clock running.
@@ -1269,42 +1321,12 @@ static void mmc_power_up(struct mmc_host *host)
void mmc_power_off(struct mmc_host *host)
{
- struct mmc_card *card;
- unsigned int notify_type;
- unsigned int timeout;
- int err;
-
mmc_host_clk_hold(host);
- card = host->card;
host->ios.clock = 0;
host->ios.vdd = 0;
- if (card && mmc_card_mmc(card) &&
- (card->poweroff_notify_state == MMC_POWERED_ON)) {
-
- if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
- notify_type = EXT_CSD_POWER_OFF_SHORT;
- timeout = card->ext_csd.generic_cmd6_time;
- card->poweroff_notify_state = MMC_POWEROFF_SHORT;
- } else {
- notify_type = EXT_CSD_POWER_OFF_LONG;
- timeout = card->ext_csd.power_off_longtime;
- card->poweroff_notify_state = MMC_POWEROFF_LONG;
- }
-
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_POWER_OFF_NOTIFICATION,
- notify_type, timeout);
-
- if (err && err != -EBADMSG)
- pr_err("Device failed to respond within %d poweroff "
- "time. Forcefully powering down the device\n",
- timeout);
-
- /* Set the card state to no notification after the poweroff */
- card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
- }
+ mmc_poweroff_notify(host);
/*
* Reset ocr mask to be the highest possible voltage supported for
@@ -2196,7 +2218,7 @@ int mmc_card_sleep(struct mmc_host *host)
mmc_bus_get(host);
- if (host->bus_ops && !host->bus_dead && host->bus_ops->awake)
+ if (host->bus_ops && !host->bus_dead && host->bus_ops->sleep)
err = host->bus_ops->sleep(host);
mmc_bus_put(host);
@@ -2302,8 +2324,17 @@ int mmc_suspend_host(struct mmc_host *host)
* pre-claim the host.
*/
if (mmc_try_claim_host(host)) {
- if (host->bus_ops->suspend)
+ if (host->bus_ops->suspend) {
+ /*
+ * For eMMC 4.5 device send notify command
+ * before sleep, because in sleep state eMMC 4.5
+ * devices respond to only RESET and AWAKE cmd
+ */
+ mmc_poweroff_notify(host);
err = host->bus_ops->suspend(host);
+ }
+ mmc_do_release_host(host);
+
if (err == -ENOSYS || !host->bus_ops->resume) {
/*
* We simply "remove" the card in this case.
@@ -2318,7 +2349,6 @@ int mmc_suspend_host(struct mmc_host *host)
host->pm_flags = 0;
err = 0;
}
- mmc_do_release_host(host);
} else {
err = -EBUSY;
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index dbf421a6279c..d240427c1246 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -876,17 +876,21 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
* set the notification byte in the ext_csd register of device
*/
if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) &&
- (card->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)) {
+ (card->ext_csd.rev >= 6)) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_POWER_OFF_NOTIFICATION,
EXT_CSD_POWER_ON,
card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
- }
- if (!err)
- card->poweroff_notify_state = MMC_POWERED_ON;
+ /*
+ * The err can be -EBADMSG or 0,
+ * so check for success and update the flag
+ */
+ if (!err)
+ card->poweroff_notify_state = MMC_POWERED_ON;
+ }
/*
* Activate high speed (if supported)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 325ea61e12d3..8e0fbe994047 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -732,6 +732,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
"failed to config DMA channel. Falling back to PIO\n");
dma_release_channel(host->dma);
host->do_dma = 0;
+ host->dma = NULL;
}
}
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index f0d792183b8e..d1fb561e089d 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1010,6 +1010,7 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno)
host->data->sg_len,
omap_hsmmc_get_dma_dir(host, host->data));
omap_free_dma(dma_ch);
+ host->data->host_cookie = 0;
}
host->data = NULL;
}
@@ -1575,8 +1576,10 @@ static void omap_hsmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
struct mmc_data *data = mrq->data;
if (host->use_dma) {
- dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
- omap_hsmmc_get_dma_dir(host, data));
+ if (data->host_cookie)
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len,
+ omap_hsmmc_get_dma_dir(host, data));
data->host_cookie = 0;
}
}
diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c
index 4b920b7621cf..87b6f079b6e0 100644
--- a/drivers/mmc/host/sdhci-cns3xxx.c
+++ b/drivers/mmc/host/sdhci-cns3xxx.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/mmc/host.h>
+#include <linux/module.h>
#include <mach/cns3xxx.h>
#include "sdhci-pltfm.h"
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 3d00e722efc9..cb60c4197e0a 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -644,8 +644,6 @@ static int sdhci_s3c_resume(struct platform_device *dev)
static struct platform_driver sdhci_s3c_driver = {
.probe = sdhci_s3c_probe,
.remove = __devexit_p(sdhci_s3c_remove),
- .suspend = sdhci_s3c_suspend,
- .resume = sdhci_s3c_resume,
.driver = {
.owner = THIS_MODULE,
.name = "s3c-sdhci",
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 369366c8e205..d5505f3fe2a1 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -908,7 +908,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (host->power) {
pm_runtime_put(&host->pd->dev);
host->power = false;
- if (p->down_pwr)
+ if (p->down_pwr && ios->power_mode == MMC_POWER_OFF)
p->down_pwr(host->pd);
}
host->state = STATE_IDLE;
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index d85a60cda167..4208b3958069 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -798,7 +798,7 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
/* start bus clock */
tmio_mmc_clk_start(host);
} else if (ios->power_mode != MMC_POWER_UP) {
- if (host->set_pwr)
+ if (host->set_pwr && ios->power_mode == MMC_POWER_OFF)
host->set_pwr(host->pdev, 0);
if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) &&
pdata->power) {
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:13:57 +0000