diff options
Diffstat (limited to 'drivers/iio/light')
| -rw-r--r-- | drivers/iio/light/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/iio/light/ltr501.c | 2 | ||||
| -rw-r--r-- | drivers/iio/light/stk3310.c | 53 |
3 files changed, 20 insertions, 37 deletions
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index e6198b7c9cbf..a5c59251ec0e 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -188,6 +188,7 @@ config SENSORS_LM3533 config LTR501 tristate "LTR-501ALS-01 light sensor" depends on I2C + select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help @@ -201,6 +202,7 @@ config LTR501 config STK3310 tristate "STK3310 ALS and proximity sensor" depends on I2C + select REGMAP_I2C help Say yes here to get support for the Sensortek STK3310 ambient light and proximity sensor. The STK3311 model is also supported by this diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c index 1ef7d3773ab9..b5a0e66b5f28 100644 --- a/drivers/iio/light/ltr501.c +++ b/drivers/iio/light/ltr501.c @@ -1302,7 +1302,7 @@ static int ltr501_init(struct ltr501_data *data) if (ret < 0) return ret; - data->als_contr = ret | data->chip_info->als_mode_active; + data->als_contr = status | data->chip_info->als_mode_active; ret = regmap_read(data->regmap, LTR501_PS_CONTR, &status); if (ret < 0) diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c index fee4297d7c8f..c1a218236be5 100644 --- a/drivers/iio/light/stk3310.c +++ b/drivers/iio/light/stk3310.c @@ -43,7 +43,6 @@ #define STK3311_CHIP_ID_VAL 0x1D #define STK3310_PSINT_EN 0x01 #define STK3310_PS_MAX_VAL 0xFFFF -#define STK3310_THRESH_MAX 0xFFFF #define STK3310_DRIVER_NAME "stk3310" #define STK3310_REGMAP_NAME "stk3310_regmap" @@ -84,15 +83,13 @@ static const struct reg_field stk3310_reg_field_flag_psint = REG_FIELD(STK3310_REG_FLAG, 4, 4); static const struct reg_field stk3310_reg_field_flag_nf = REG_FIELD(STK3310_REG_FLAG, 0, 0); -/* - * Maximum PS values with regard to scale. Used to export the 'inverse' - * PS value (high values for far objects, low values for near objects). - */ + +/* Estimate maximum proximity values with regard to measurement scale. */ static const int stk3310_ps_max[4] = { - STK3310_PS_MAX_VAL / 64, - STK3310_PS_MAX_VAL / 16, - STK3310_PS_MAX_VAL / 4, - STK3310_PS_MAX_VAL, + STK3310_PS_MAX_VAL / 640, + STK3310_PS_MAX_VAL / 160, + STK3310_PS_MAX_VAL / 40, + STK3310_PS_MAX_VAL / 10 }; static const int stk3310_scale_table[][2] = { @@ -128,14 +125,14 @@ static const struct iio_event_spec stk3310_events[] = { /* Proximity event */ { .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_FALLING, + .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), }, /* Out-of-proximity event */ { .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_RISING, + .dir = IIO_EV_DIR_FALLING, .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), }, @@ -205,23 +202,16 @@ static int stk3310_read_event(struct iio_dev *indio_dev, u8 reg; u16 buf; int ret; - unsigned int index; struct stk3310_data *data = iio_priv(indio_dev); if (info != IIO_EV_INFO_VALUE) return -EINVAL; - /* - * Only proximity interrupts are implemented at the moment. - * Since we're inverting proximity values, the sensor's 'high' - * threshold will become our 'low' threshold, associated with - * 'near' events. Similarly, the sensor's 'low' threshold will - * be our 'high' threshold, associated with 'far' events. - */ + /* Only proximity interrupts are implemented at the moment. */ if (dir == IIO_EV_DIR_RISING) - reg = STK3310_REG_THDL_PS; - else if (dir == IIO_EV_DIR_FALLING) reg = STK3310_REG_THDH_PS; + else if (dir == IIO_EV_DIR_FALLING) + reg = STK3310_REG_THDL_PS; else return -EINVAL; @@ -232,8 +222,7 @@ static int stk3310_read_event(struct iio_dev *indio_dev, dev_err(&data->client->dev, "register read failed\n"); return ret; } - regmap_field_read(data->reg_ps_gain, &index); - *val = swab16(stk3310_ps_max[index] - buf); + *val = swab16(buf); return IIO_VAL_INT; } @@ -257,13 +246,13 @@ static int stk3310_write_event(struct iio_dev *indio_dev, return -EINVAL; if (dir == IIO_EV_DIR_RISING) - reg = STK3310_REG_THDL_PS; - else if (dir == IIO_EV_DIR_FALLING) reg = STK3310_REG_THDH_PS; + else if (dir == IIO_EV_DIR_FALLING) + reg = STK3310_REG_THDL_PS; else return -EINVAL; - buf = swab16(stk3310_ps_max[index] - val); + buf = swab16(val); ret = regmap_bulk_write(data->regmap, reg, &buf, 2); if (ret < 0) dev_err(&client->dev, "failed to set PS threshold!\n"); @@ -334,14 +323,6 @@ static int stk3310_read_raw(struct iio_dev *indio_dev, return ret; } *val = swab16(buf); - if (chan->type == IIO_PROXIMITY) { - /* - * Invert the proximity data so we return low values - * for close objects and high values for far ones. - */ - regmap_field_read(data->reg_ps_gain, &index); - *val = stk3310_ps_max[index] - *val; - } mutex_unlock(&data->lock); return IIO_VAL_INT; case IIO_CHAN_INFO_INT_TIME: @@ -581,8 +562,8 @@ static irqreturn_t stk3310_irq_event_handler(int irq, void *private) } event = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 1, IIO_EV_TYPE_THRESH, - (dir ? IIO_EV_DIR_RISING : - IIO_EV_DIR_FALLING)); + (dir ? IIO_EV_DIR_FALLING : + IIO_EV_DIR_RISING)); iio_push_event(indio_dev, event, data->timestamp); /* Reset the interrupt flag */ |