diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/iio/light/Kconfig | 2 | ||||
-rw-r--r-- | drivers/iio/light/ltr501.c | 2 | ||||
-rw-r--r-- | drivers/iio/light/stk3310.c | 53 | ||||
-rw-r--r-- | drivers/iio/magnetometer/mmc35240.c | 35 | ||||
-rw-r--r-- | drivers/iio/proximity/sx9500.c | 26 | ||||
-rw-r--r-- | drivers/iio/temperature/tmp006.c | 3 |
6 files changed, 58 insertions, 63 deletions
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index e6198b7c9cbf..a5c59251ec0e 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -188,6 +188,7 @@ config SENSORS_LM3533 config LTR501 tristate "LTR-501ALS-01 light sensor" depends on I2C + select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help @@ -201,6 +202,7 @@ config LTR501 config STK3310 tristate "STK3310 ALS and proximity sensor" depends on I2C + select REGMAP_I2C help Say yes here to get support for the Sensortek STK3310 ambient light and proximity sensor. The STK3311 model is also supported by this diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c index 1ef7d3773ab9..b5a0e66b5f28 100644 --- a/drivers/iio/light/ltr501.c +++ b/drivers/iio/light/ltr501.c @@ -1302,7 +1302,7 @@ static int ltr501_init(struct ltr501_data *data) if (ret < 0) return ret; - data->als_contr = ret | data->chip_info->als_mode_active; + data->als_contr = status | data->chip_info->als_mode_active; ret = regmap_read(data->regmap, LTR501_PS_CONTR, &status); if (ret < 0) diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c index fee4297d7c8f..c1a218236be5 100644 --- a/drivers/iio/light/stk3310.c +++ b/drivers/iio/light/stk3310.c @@ -43,7 +43,6 @@ #define STK3311_CHIP_ID_VAL 0x1D #define STK3310_PSINT_EN 0x01 #define STK3310_PS_MAX_VAL 0xFFFF -#define STK3310_THRESH_MAX 0xFFFF #define STK3310_DRIVER_NAME "stk3310" #define STK3310_REGMAP_NAME "stk3310_regmap" @@ -84,15 +83,13 @@ static const struct reg_field stk3310_reg_field_flag_psint = REG_FIELD(STK3310_REG_FLAG, 4, 4); static const struct reg_field stk3310_reg_field_flag_nf = REG_FIELD(STK3310_REG_FLAG, 0, 0); -/* - * Maximum PS values with regard to scale. Used to export the 'inverse' - * PS value (high values for far objects, low values for near objects). - */ + +/* Estimate maximum proximity values with regard to measurement scale. */ static const int stk3310_ps_max[4] = { - STK3310_PS_MAX_VAL / 64, - STK3310_PS_MAX_VAL / 16, - STK3310_PS_MAX_VAL / 4, - STK3310_PS_MAX_VAL, + STK3310_PS_MAX_VAL / 640, + STK3310_PS_MAX_VAL / 160, + STK3310_PS_MAX_VAL / 40, + STK3310_PS_MAX_VAL / 10 }; static const int stk3310_scale_table[][2] = { @@ -128,14 +125,14 @@ static const struct iio_event_spec stk3310_events[] = { /* Proximity event */ { .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_FALLING, + .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), }, /* Out-of-proximity event */ { .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_RISING, + .dir = IIO_EV_DIR_FALLING, .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), }, @@ -205,23 +202,16 @@ static int stk3310_read_event(struct iio_dev *indio_dev, u8 reg; u16 buf; int ret; - unsigned int index; struct stk3310_data *data = iio_priv(indio_dev); if (info != IIO_EV_INFO_VALUE) return -EINVAL; - /* - * Only proximity interrupts are implemented at the moment. - * Since we're inverting proximity values, the sensor's 'high' - * threshold will become our 'low' threshold, associated with - * 'near' events. Similarly, the sensor's 'low' threshold will - * be our 'high' threshold, associated with 'far' events. - */ + /* Only proximity interrupts are implemented at the moment. */ if (dir == IIO_EV_DIR_RISING) - reg = STK3310_REG_THDL_PS; - else if (dir == IIO_EV_DIR_FALLING) reg = STK3310_REG_THDH_PS; + else if (dir == IIO_EV_DIR_FALLING) + reg = STK3310_REG_THDL_PS; else return -EINVAL; @@ -232,8 +222,7 @@ static int stk3310_read_event(struct iio_dev *indio_dev, dev_err(&data->client->dev, "register read failed\n"); return ret; } - regmap_field_read(data->reg_ps_gain, &index); - *val = swab16(stk3310_ps_max[index] - buf); + *val = swab16(buf); return IIO_VAL_INT; } @@ -257,13 +246,13 @@ static int stk3310_write_event(struct iio_dev *indio_dev, return -EINVAL; if (dir == IIO_EV_DIR_RISING) - reg = STK3310_REG_THDL_PS; - else if (dir == IIO_EV_DIR_FALLING) reg = STK3310_REG_THDH_PS; + else if (dir == IIO_EV_DIR_FALLING) + reg = STK3310_REG_THDL_PS; else return -EINVAL; - buf = swab16(stk3310_ps_max[index] - val); + buf = swab16(val); ret = regmap_bulk_write(data->regmap, reg, &buf, 2); if (ret < 0) dev_err(&client->dev, "failed to set PS threshold!\n"); @@ -334,14 +323,6 @@ static int stk3310_read_raw(struct iio_dev *indio_dev, return ret; } *val = swab16(buf); - if (chan->type == IIO_PROXIMITY) { - /* - * Invert the proximity data so we return low values - * for close objects and high values for far ones. - */ - regmap_field_read(data->reg_ps_gain, &index); - *val = stk3310_ps_max[index] - *val; - } mutex_unlock(&data->lock); return IIO_VAL_INT; case IIO_CHAN_INFO_INT_TIME: @@ -581,8 +562,8 @@ static irqreturn_t stk3310_irq_event_handler(int irq, void *private) } event = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 1, IIO_EV_TYPE_THRESH, - (dir ? IIO_EV_DIR_RISING : - IIO_EV_DIR_FALLING)); + (dir ? IIO_EV_DIR_FALLING : + IIO_EV_DIR_RISING)); iio_push_event(indio_dev, event, data->timestamp); /* Reset the interrupt flag */ diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c index 7a2ea71c659a..d927397a6ef7 100644 --- a/drivers/iio/magnetometer/mmc35240.c +++ b/drivers/iio/magnetometer/mmc35240.c @@ -84,10 +84,10 @@ #define MMC35240_OTP_START_ADDR 0x1B enum mmc35240_resolution { - MMC35240_16_BITS_SLOW = 0, /* 100 Hz */ - MMC35240_16_BITS_FAST, /* 200 Hz */ - MMC35240_14_BITS, /* 333 Hz */ - MMC35240_12_BITS, /* 666 Hz */ + MMC35240_16_BITS_SLOW = 0, /* 7.92 ms */ + MMC35240_16_BITS_FAST, /* 4.08 ms */ + MMC35240_14_BITS, /* 2.16 ms */ + MMC35240_12_BITS, /* 1.20 ms */ }; enum mmc35240_axis { @@ -100,22 +100,22 @@ static const struct { int sens[3]; /* sensitivity per X, Y, Z axis */ int nfo; /* null field output */ } mmc35240_props_table[] = { - /* 16 bits, 100Hz ODR */ + /* 16 bits, 125Hz ODR */ { {1024, 1024, 1024}, 32768, }, - /* 16 bits, 200Hz ODR */ + /* 16 bits, 250Hz ODR */ { {1024, 1024, 770}, 32768, }, - /* 14 bits, 333Hz ODR */ + /* 14 bits, 450Hz ODR */ { {256, 256, 193}, 8192, }, - /* 12 bits, 666Hz ODR */ + /* 12 bits, 800Hz ODR */ { {64, 64, 48}, 2048, @@ -133,9 +133,15 @@ struct mmc35240_data { int axis_scale[3]; }; -static const int mmc35240_samp_freq[] = {100, 200, 333, 666}; +static const struct { + int val; + int val2; +} mmc35240_samp_freq[] = { {1, 500000}, + {13, 0}, + {25, 0}, + {50, 0} }; -static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("100 200 333 666"); +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1.5 13 25 50"); #define MMC35240_CHANNEL(_axis) { \ .type = IIO_MAGN, \ @@ -168,7 +174,8 @@ static int mmc35240_get_samp_freq_index(struct mmc35240_data *data, int i; for (i = 0; i < ARRAY_SIZE(mmc35240_samp_freq); i++) - if (mmc35240_samp_freq[i] == val) + if (mmc35240_samp_freq[i].val == val && + mmc35240_samp_freq[i].val2 == val2) return i; return -EINVAL; } @@ -378,9 +385,9 @@ static int mmc35240_read_raw(struct iio_dev *indio_dev, if (i < 0 || i >= ARRAY_SIZE(mmc35240_samp_freq)) return -EINVAL; - *val = mmc35240_samp_freq[i]; - *val2 = 0; - return IIO_VAL_INT; + *val = mmc35240_samp_freq[i].val; + *val2 = mmc35240_samp_freq[i].val2; + return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c index 01494cd6fa32..3d756bd8c703 100644 --- a/drivers/iio/proximity/sx9500.c +++ b/drivers/iio/proximity/sx9500.c @@ -80,6 +80,7 @@ #define SX9500_COMPSTAT_MASK GENMASK(3, 0) #define SX9500_NUM_CHANNELS 4 +#define SX9500_CHAN_MASK GENMASK(SX9500_NUM_CHANNELS - 1, 0) struct sx9500_data { struct mutex mutex; @@ -329,27 +330,29 @@ static int sx9500_read_proximity(struct sx9500_data *data, else ret = sx9500_wait_for_sample(data); - if (ret < 0) - return ret; - mutex_lock(&data->mutex); - ret = sx9500_read_prox_data(data, chan, val); if (ret < 0) - goto out; + goto out_dec_data_rdy; - ret = sx9500_dec_chan_users(data, chan->channel); + ret = sx9500_read_prox_data(data, chan, val); if (ret < 0) - goto out; + goto out_dec_data_rdy; ret = sx9500_dec_data_rdy_users(data); if (ret < 0) + goto out_dec_chan; + + ret = sx9500_dec_chan_users(data, chan->channel); + if (ret < 0) goto out; ret = IIO_VAL_INT; goto out; +out_dec_data_rdy: + sx9500_dec_data_rdy_users(data); out_dec_chan: sx9500_dec_chan_users(data, chan->channel); out: @@ -679,7 +682,7 @@ out: static int sx9500_buffer_preenable(struct iio_dev *indio_dev) { struct sx9500_data *data = iio_priv(indio_dev); - int ret, i; + int ret = 0, i; mutex_lock(&data->mutex); @@ -703,7 +706,7 @@ static int sx9500_buffer_preenable(struct iio_dev *indio_dev) static int sx9500_buffer_predisable(struct iio_dev *indio_dev) { struct sx9500_data *data = iio_priv(indio_dev); - int ret, i; + int ret = 0, i; iio_triggered_buffer_predisable(indio_dev); @@ -800,8 +803,7 @@ static int sx9500_init_compensation(struct iio_dev *indio_dev) unsigned int val; ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0, - GENMASK(SX9500_NUM_CHANNELS, 0), - GENMASK(SX9500_NUM_CHANNELS, 0)); + SX9500_CHAN_MASK, SX9500_CHAN_MASK); if (ret < 0) return ret; @@ -821,7 +823,7 @@ static int sx9500_init_compensation(struct iio_dev *indio_dev) out: regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0, - GENMASK(SX9500_NUM_CHANNELS, 0), 0); + SX9500_CHAN_MASK, 0); return ret; } diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c index fcc49f89b946..8f21f32f9739 100644 --- a/drivers/iio/temperature/tmp006.c +++ b/drivers/iio/temperature/tmp006.c @@ -132,6 +132,9 @@ static int tmp006_write_raw(struct iio_dev *indio_dev, struct tmp006_data *data = iio_priv(indio_dev); int i; + if (mask != IIO_CHAN_INFO_SAMP_FREQ) + return -EINVAL; + for (i = 0; i < ARRAY_SIZE(tmp006_freqs); i++) if ((val == tmp006_freqs[i][0]) && (val2 == tmp006_freqs[i][1])) { |