diff options
Diffstat (limited to 'Documentation')
13 files changed, 592 insertions, 93 deletions
diff --git a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml new file mode 100644 index 000000000000..0d06387184d6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for Analog Devices AXI clkgen pcore clock generator + +maintainers: + - Lars-Peter Clausen <lars@metafoo.de> + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The axi_clkgen IP core is a software programmable clock generator, + that can be synthesized on various FPGA platforms. + + Link: https://wiki.analog.com/resources/fpga/docs/axi_clkgen + +properties: + compatible: + enum: + - adi,axi-clkgen-2.00.a + + clocks: + description: + Specifies the reference clock(s) from which the output frequency is + derived. This must either reference one clock if only the first clock + input is connected or two if both clock inputs are connected. + minItems: 1 + maxItems: 2 + + '#clock-cells': + const: 0 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + clock-controller@ff000000 { + compatible = "adi,axi-clkgen-2.00.a"; + #clock-cells = <0>; + reg = <0xff000000 0x1000>; + clocks = <&osc 1>; + }; diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt deleted file mode 100644 index aca94fe9416f..000000000000 --- a/Documentation/devicetree/bindings/clock/axi-clkgen.txt +++ /dev/null @@ -1,25 +0,0 @@ -Binding for the axi-clkgen clock generator - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "adi,axi-clkgen-1.00.a" or "adi,axi-clkgen-2.00.a". -- #clock-cells : from common clock binding; Should always be set to 0. -- reg : Address and length of the axi-clkgen register set. -- clocks : Phandle and clock specifier for the parent clock(s). This must - either reference one clock if only the first clock input is connected or two - if both clock inputs are connected. For the later case the clock connected - to the first input must be specified first. - -Optional properties: -- clock-output-names : From common clock binding. - -Example: - clock@ff000000 { - compatible = "adi,axi-clkgen"; - #clock-cells = <0>; - reg = <0xff000000 0x1000>; - clocks = <&osc 1>; - }; diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml new file mode 100644 index 000000000000..565ca468cb44 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/canaan,k210-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Canaan Kendryte K210 Clock Device Tree Bindings + +maintainers: + - Damien Le Moal <damien.lemoal@wdc.com> + +description: | + Canaan Kendryte K210 SoC clocks driver bindings. The clock + controller node must be defined as a child node of the K210 + system controller node. + + See also: + - dt-bindings/clock/k210-clk.h + +properties: + compatible: + const: canaan,k210-clk + + clocks: + description: + Phandle of the SoC 26MHz fixed-rate oscillator clock. + + '#clock-cells': + const: 1 + +required: + - compatible + - '#clock-cells' + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/k210-clk.h> + clocks { + in0: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + }; + + /* ... */ + sysclk: clock-controller { + #clock-cells = <1>; + compatible = "canaan,k210-clk"; + clocks = <&in0>; + }; diff --git a/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml new file mode 100644 index 000000000000..1fa390ee7b9b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,flexspi-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale FlexSPI clock driver for Layerscape SoCs + +maintainers: + - Michael Walle <michael@walle.cc> + +description: + The Freescale Layerscape SoCs have a special FlexSPI clock which is + derived from the platform PLL. + +properties: + compatible: + enum: + - fsl,ls1028a-flexspi-clk + - fsl,lx2160a-flexspi-clk + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + - | + dcfg { + #address-cells = <1>; + #size-cells = <1>; + + fspi_clk: clock-controller@900 { + compatible = "fsl,ls1028a-flexspi-clk"; + reg = <0x900 0x4>; + #clock-cells = <0>; + clocks = <&parentclk>; + clock-output-names = "fspi_clk"; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml new file mode 100644 index 000000000000..c40a74b5d672 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,aoncc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for LPASS Always ON Clock Controller on SM8250 SoCs + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/qcom,sm8250-lpass-aoncc.h for the full list + of Audio Clock controller clock IDs. + +properties: + compatible: + const: qcom,sm8250-lpass-aon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: LPASS Core voting clock + - description: Glitch Free Mux register clock + + clock-names: + items: + - const: core + - const: bus + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h> + #include <dt-bindings/sound/qcom,q6afe.h> + clock-controller@3800000 { + #clock-cells = <1>; + compatible = "qcom,sm8250-lpass-aon"; + reg = <0x03380000 0x40000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "bus"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml new file mode 100644 index 000000000000..915d76206ad0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,audiocc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for LPASS Audio Clock Controller on SM8250 SoCs + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/qcom,sm8250-lpass-audiocc.h for the full list + of Audio Clock controller clock IDs. + +properties: + compatible: + const: qcom,sm8250-lpass-audiocc + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: LPASS Core voting clock + - description: Glitch Free Mux register clock + + clock-names: + items: + - const: core + - const: bus + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h> + #include <dt-bindings/sound/qcom,q6afe.h> + clock-controller@3300000 { + #clock-cells = <1>; + compatible = "qcom,sm8250-lpass-audiocc"; + reg = <0x03300000 0x30000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "bus"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml new file mode 100644 index 000000000000..1121b3934cb9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SDX55 + +maintainers: + - Vinod Koul <vkoul@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SDX55 + + See also: + - dt-bindings/clock/qcom,gcc-sdx55.h + +properties: + compatible: + const: qcom,gcc-sdx55 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PLL test clock source (Optional clock) + minItems: 2 + maxItems: 3 + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + - const: core_bi_pll_test_se # Optional clock + minItems: 2 + maxItems: 3 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sdx55"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, <&pll_test_clk>; + clock-names = "bi_tcxo", "sleep_clk", "core_bi_pll_test_se"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index a46a3a799a70..12c9cbc0ebf9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -19,8 +19,10 @@ properties: enum: - qcom,sc7180-rpmh-clk - qcom,sdm845-rpmh-clk + - qcom,sdx55-rpmh-clk - qcom,sm8150-rpmh-clk - qcom,sm8250-rpmh-clk + - qcom,sm8350-rpmh-clk clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml new file mode 100644 index 000000000000..f49027edfc44 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SC7180. + + See also: + - dt-bindings/clock/qcom,camcc-sc7180.h + +properties: + compatible: + const: qcom,sc7180-camcc + + clocks: + items: + - description: Board XO source + - description: Camera_ahb clock from GCC + - description: Camera XO clock from GCC + + clock-names: + items: + - const: bi_tcxo + - const: iface + - const: xo + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@ad00000 { + compatible = "qcom,sc7180-camcc"; + reg = <0x0ad00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_XO_CLK>; + clock-names = "bi_tcxo", "iface", "xo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt deleted file mode 100644 index da92f5748dee..000000000000 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt +++ /dev/null @@ -1,68 +0,0 @@ -* Renesas R-Car USB 2.0 clock selector - -This file provides information on what the device node for the R-Car USB 2.0 -clock selector. - -If you connect an external clock to the USB_EXTAL pin only, you should set -the clock rate to "usb_extal" node only. -If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module -is not needed because this is default setting. (Of course, you can set the -clock rates to both "usb_extal" and "usb_xtal" nodes. - -Case 1: An external clock connects to R-Car SoC - +----------+ +--- R-Car ---------------------+ - |External |---|USB_EXTAL ---> all usb channels| - |clock | |USB_XTAL | - +----------+ +-------------------------------+ -In this case, we need this driver with "usb_extal" clock. - -Case 2: An oscillator connects to R-Car SoC - +----------+ +--- R-Car ---------------------+ - |Oscillator|---|USB_EXTAL -+-> all usb channels| - | |---|USB_XTAL --+ | - +----------+ +-------------------------------+ -In this case, we don't need this selector. - -Required properties: -- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of - an R8A7795 SoC. - "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of - an R8A77960 SoC. - "renesas,r8a77961-rcar-usb2-clock-sel" if the device if a part of - an R8A77961 SoC. - "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3 - compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of the USB 2.0 clock selector register block. -- clocks: A list of phandles and specifier pairs. -- clock-names: Name of the clocks. - - The functional clock of USB 2.0 host side must be "ehci_ohci" - - The functional clock of HS-USB side must be "hs-usb-if" - - The USB_EXTAL clock pin must be "usb_extal" - - The USB_XTAL clock pin must be "usb_xtal" -- #clock-cells: Must be 0 -- power-domains: A phandle and symbolic PM domain specifier. - See power/renesas,rcar-sysc.yaml. -- resets: A list of phandles and specifier pairs. -- reset-names: Name of the resets. - - The reset of USB 2.0 host side must be "ehci_ohci" - - The reset of HS-USB side must be "hs-usb-if" - -Example (R-Car H3): - - usb2_clksel: clock-controller@e6590630 { - compatible = "renesas,r8a7795-rcar-usb2-clock-sel", - "renesas,rcar-gen3-usb2-clock-sel"; - reg = <0 0xe6590630 0 0x02>; - clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, - <&usb_extal>, <&usb_xtal>; - clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal"; - #clock-cells = <0>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>, <&cpg 704>; - reset-names = "ehci_ohci", "hs-usb-if"; - }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml new file mode 100644 index 000000000000..5be1229b3d6e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas R-Car USB 2.0 clock selector + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +description: | + If you connect an external clock to the USB_EXTAL pin only, you should set + the clock rate to "usb_extal" node only. + If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module + is not needed because this is default setting. (Of course, you can set the + clock rates to both "usb_extal" and "usb_xtal" nodes. + + Case 1: An external clock connects to R-Car SoC + +----------+ +--- R-Car ---------------------+ + |External |---|USB_EXTAL ---> all usb channels| + |clock | |USB_XTAL | + +----------+ +-------------------------------+ + + In this case, we need this driver with "usb_extal" clock. + + Case 2: An oscillator connects to R-Car SoC + +----------+ +--- R-Car ---------------------+ + |Oscillator|---|USB_EXTAL -+-> all usb channels| + | |---|USB_XTAL --+ | + +----------+ +-------------------------------+ + In this case, we don't need this selector. + +properties: + compatible: + items: + - enum: + - renesas,r8a7795-rcar-usb2-clock-sel # R-Car H3 + - renesas,r8a7796-rcar-usb2-clock-sel # R-Car M3-W + - renesas,r8a77961-rcar-usb2-clock-sel # R-Car M3-W+ + - const: renesas,rcar-gen3-usb2-clock-sel + + reg: + maxItems: 1 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: ehci_ohci + - const: hs-usb-if + - const: usb_extal + - const: usb_xtal + + '#clock-cells': + const: 0 + + power-domains: + maxItems: 1 + + resets: + minItems: 2 + maxItems: 2 + + reset-names: + items: + - const: ehci_ohci + - const: hs-usb-if + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - power-domains + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a7795-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0xe6590630 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal>, <&usb_xtal>; + clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + }; diff --git a/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml new file mode 100644 index 000000000000..e17143cac316 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 SiFive, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/sifive/fu740-prci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive FU740 Power Reset Clock Interrupt Controller (PRCI) + +maintainers: + - Zong Li <zong.li@sifive.com> + - Paul Walmsley <paul.walmsley@sifive.com> + +description: + On the FU740 family of SoCs, most system-wide clock and reset integration + is via the PRCI IP block. + The clock consumer should specify the desired clock via the clock ID + macros defined in include/dt-bindings/clock/sifive-fu740-prci.h. + These macros begin with PRCI_CLK_. + + The hfclk and rtcclk nodes are required, and represent physical + crystals or resonators located on the PCB. These nodes should be present + underneath /, rather than /soc. + +properties: + compatible: + const: sifive,fu740-c000-prci + + reg: + maxItems: 1 + + clocks: + items: + - description: high frequency clock. + - description: RTL clock. + + clock-names: + items: + - const: hfclk + - const: rtcclk + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - "#clock-cells" + +additionalProperties: false + +examples: + - | + prci: clock-controller@10000000 { + compatible = "sifive,fu740-c000-prci"; + reg = <0x10000000 0x1000>; + clocks = <&hfclk>, <&rtcclk>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index ffaf833b97ee..041ae90b0d8f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -187,6 +187,8 @@ patternProperties: description: CALAO Systems SAS "^calxeda,.*": description: Calxeda + "^canaan,.*": + description: Canaan, Inc. "^caninos,.*": description: Caninos Loucos Program "^capella,.*": |