Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The core framework got some nice improvements this time around. We
  gained the ability to get struct clk pointers from a struct clk_hw so
  that clk providers can consume the clks they provide, if they need to
  do something like that. This has been a long missing part of the clk
  provider API that will help us move away from exposing a struct clk
  pointer in the struct clk_hw. Tracepoints are added for the
  clk_set_rate() "range" functions, similar to the tracepoints we
  already have for clk_set_rate() and we added a column to debugfs to
  help developers understand the hardware enable state of clks in case
  firmware or bootloader state is different than what is expected.
  Overall the core changes are mostly improving the clk driver writing
  experience.

  At the driver level, we have the usual collection of driver updates
  and new drivers for new SoCs. This time around the Qualcomm folks
  introduced a good handful of clk drivers for various parts of three or
  four SoCs. The SiFive folks added a new clk driver for their FU740
  SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic
  SoCs had lots of work done after that for various new features. One
  last thing to note in the driver area is that the i.MX driver has
  gained a new binding to support SCU clks after being on the list for
  many months. It uses a two cell binding which is sort of rare in clk
  DT bindings. Beyond that we have the usual set of driver fixes and
  tweaks that come from more testing and finding out that some
  configuration was wrong or that a driver could support being built as
  a module.

  Summary:

  Core:
   - Add some trace points for clk_set_rate() "range" functions
   - Add hardware enable information to clk_summary debugfs
   - Replace clk-provider.h with of_clk.h when possible
   - Add devm variant of clk_notifier_register()
   - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw

  New Drivers:
   - Bindings for Canaan K210 SoC clks
   - Support for SiFive FU740 PRCI
   - Camera clks on Qualcomm SC7180 SoCs
   - GCC and RPMh clks on Qualcomm SDX55 SoCs
   - RPMh clks on Qualcomm SM8350 SoCs
   - LPASS clks on Qualcomm SM8250 SoCs

  Updates:
   - DVFS support for AT91 clk driver
   - Update git repo branch for Renesas clock drivers
   - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
   - Stop using __raw_*() I/O accessors in Renesas clk drivers
   - One more conversion of DT bindings to json-schema
   - Make i.MX clk-gate2 driver more flexible
   - New two cell binding for i.MX SCU clks
   - Drop of_match_ptr() in i.MX8 clk drivers
   - Add arch dependencies for Rockchip clk drivers
   - Fix i2s on Rockchip rk3066
   - Add MIPI DSI clks on Amlogic axg and g12 SoCs
   - Support modular builds of Amlogic clk drivers
   - Fix an Amlogic Video PLL clock dependency
   - Samsung Kconfig dependencies updates for better compile test coverage
   - Refactoring of the Samsung PLL clocks driver
   - Small Tegra driver cleanups
   - Minor fixes to Ingenic and VC5 clk drivers
   - Cleanup patches to remove unused variables and plug memory leaks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
  dt-binding: clock: Document canaan,k210-clk bindings
  dt-bindings: Add Canaan vendor prefix
  clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"
  clk: ingenic: Fix divider calculation with div tables
  clk: sunxi-ng: Make sure divider tables have sentinel
  clk: s2mps11: Fix a resource leak in error handling paths in the probe function
  clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
  clk: si5351: Wait for bit clear after PLL reset
  clk: at91: sam9x60: remove atmel,osc-bypass support
  clk: at91: sama7g5: register cpu clock
  clk: at91: clk-master: re-factor master clock
  clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
  clk: at91: sama7g5: decrease lower limit for MCK0 rate
  clk: at91: sama7g5: remove mck0 from parent list of other clocks
  clk: at91: clk-sam9x60-pll: allow runtime changes for pll
  clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
  clk: at91: clk-master: add 5th divisor for mck master
  clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT
  dt-bindings: clock: at91: add sama7g5 pll defines
  clk: at91: sama7g5: fix compilation error
  ...

13 files changed, 592 insertions, 93 deletions

diff --git a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
new file mode 100644
index 000000000000..0d06387184d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Analog Devices AXI clkgen pcore clock generator
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The axi_clkgen IP core is a software programmable clock generator,
+  that can be synthesized on various FPGA platforms.
+
+  Link: https://wiki.analog.com/resources/fpga/docs/axi_clkgen
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-clkgen-2.00.a
+
+  clocks:
+    description:
+      Specifies the reference clock(s) from which the output frequency is
+      derived. This must either reference one clock if only the first clock
+      input is connected or two if both clock inputs are connected.
+    minItems: 1
+    maxItems: 2
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ff000000 {
+      compatible = "adi,axi-clkgen-2.00.a";
+      #clock-cells = <0>;
+      reg = <0xff000000 0x1000>;
+      clocks = <&osc 1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt
deleted file mode 100644
index aca94fe9416f..000000000000
--- a/Documentation/devicetree/bindings/clock/axi-clkgen.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Binding for the axi-clkgen clock generator
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "adi,axi-clkgen-1.00.a" or "adi,axi-clkgen-2.00.a".
-- #clock-cells : from common clock binding; Should always be set to 0.
-- reg : Address and length of the axi-clkgen register set.
-- clocks : Phandle and clock specifier for the parent clock(s). This must
-	either reference one clock if only the first clock input is connected or two
-	if both clock inputs are connected. For the later case the clock connected
-	to the first input must be specified first.
-
-Optional properties:
-- clock-output-names : From common clock binding.
-
-Example:
-	clock@ff000000 {
-		compatible = "adi,axi-clkgen";
-		#clock-cells = <0>;
-		reg = <0xff000000 0x1000>;
-		clocks = <&osc 1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
new file mode 100644
index 000000000000..565ca468cb44
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/canaan,k210-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 Clock Device Tree Bindings
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description: |
+  Canaan Kendryte K210 SoC clocks driver bindings. The clock
+  controller node must be defined as a child node of the K210
+  system controller node.
+
+  See also:
+  - dt-bindings/clock/k210-clk.h
+
+properties:
+  compatible:
+    const: canaan,k210-clk
+
+  clocks:
+    description:
+      Phandle of the SoC 26MHz fixed-rate oscillator clock.
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    clocks {
+      in0: oscillator {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <26000000>;
+      };
+    };
+
+    /* ... */
+    sysclk: clock-controller {
+      #clock-cells = <1>;
+      compatible = "canaan,k210-clk";
+      clocks = <&in0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml
new file mode 100644
index 000000000000..1fa390ee7b9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,flexspi-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale FlexSPI clock driver for Layerscape SoCs
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description:
+  The Freescale Layerscape SoCs have a special FlexSPI clock which is
+  derived from the platform PLL.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1028a-flexspi-clk
+      - fsl,lx2160a-flexspi-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    dcfg {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        fspi_clk: clock-controller@900 {
+            compatible = "fsl,ls1028a-flexspi-clk";
+            reg = <0x900 0x4>;
+            #clock-cells = <0>;
+            clocks = <&parentclk>;
+            clock-output-names = "fspi_clk";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
new file mode 100644
index 000000000000..c40a74b5d672
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,aoncc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for LPASS Always ON Clock Controller on SM8250 SoCs
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/qcom,sm8250-lpass-aoncc.h for the full list
+  of Audio Clock controller clock IDs.
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-aon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: Glitch Free Mux register clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    clock-controller@3800000 {
+      #clock-cells = <1>;
+      compatible = "qcom,sm8250-lpass-aon";
+      reg = <0x03380000 0x40000>;
+      clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "core", "bus";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
new file mode 100644
index 000000000000..915d76206ad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,audiocc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for LPASS Audio Clock Controller on SM8250 SoCs
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/qcom,sm8250-lpass-audiocc.h for the full list
+  of Audio Clock controller clock IDs.
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-audiocc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: Glitch Free Mux register clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    clock-controller@3300000 {
+      #clock-cells = <1>;
+      compatible = "qcom,sm8250-lpass-audiocc";
+      reg = <0x03300000 0x30000>;
+      clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "core", "bus";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
new file mode 100644
index 000000000000..1121b3934cb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SDX55
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SDX55
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sdx55.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx55
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PLL test clock source (Optional clock)
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: core_bi_pll_test_se # Optional clock
+    minItems: 2
+    maxItems: 3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx55";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>, <&pll_test_clk>;
+      clock-names = "bi_tcxo", "sleep_clk", "core_bi_pll_test_se";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index a46a3a799a70..12c9cbc0ebf9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -19,8 +19,10 @@ properties:
     enum:
       - qcom,sc7180-rpmh-clk
       - qcom,sdm845-rpmh-clk
+      - qcom,sdx55-rpmh-clk
       - qcom,sm8150-rpmh-clk
       - qcom,sm8250-rpmh-clk
+      - qcom,sm8350-rpmh-clk
 
   clocks:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
new file mode 100644
index 000000000000..f49027edfc44
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SC7180
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm camera clock control module which supports the clocks, resets and
+  power domains on SC7180.
+
+  See also:
+  - dt-bindings/clock/qcom,camcc-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,sc7180-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Camera_ahb clock from GCC
+      - description: Camera XO clock from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: iface
+      - const: xo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sc7180-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_CAMERA_AHB_CLK>,
+               <&gcc GCC_CAMERA_XO_CLK>;
+      clock-names = "bi_tcxo", "iface", "xo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
deleted file mode 100644
index da92f5748dee..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Renesas R-Car USB 2.0 clock selector
-
-This file provides information on what the device node for the R-Car USB 2.0
-clock selector.
-
-If you connect an external clock to the USB_EXTAL pin only, you should set
-the clock rate to "usb_extal" node only.
-If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
-is not needed because this is default setting. (Of course, you can set the
-clock rates to both "usb_extal" and "usb_xtal" nodes.
-
-Case 1: An external clock connects to R-Car SoC
-	+----------+   +--- R-Car ---------------------+
-	|External  |---|USB_EXTAL ---> all usb channels|
-	|clock     |   |USB_XTAL                       |
-	+----------+   +-------------------------------+
-In this case, we need this driver with "usb_extal" clock.
-
-Case 2: An oscillator connects to R-Car SoC
-	+----------+   +--- R-Car ---------------------+
-	|Oscillator|---|USB_EXTAL -+-> all usb channels|
-	|          |---|USB_XTAL --+                   |
-	+----------+   +-------------------------------+
-In this case, we don't need this selector.
-
-Required properties:
-- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of
-	      an R8A7795 SoC.
-	      "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of
-	      an R8A77960 SoC.
-	      "renesas,r8a77961-rcar-usb2-clock-sel" if the device if a part of
-	      an R8A77961 SoC.
-	      "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3
-	      compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the USB 2.0 clock selector register block.
-- clocks: A list of phandles and specifier pairs.
-- clock-names: Name of the clocks.
- - The functional clock of USB 2.0 host side must be "ehci_ohci"
- - The functional clock of HS-USB side must be "hs-usb-if"
- - The USB_EXTAL clock pin must be "usb_extal"
- - The USB_XTAL clock pin must be "usb_xtal"
-- #clock-cells: Must be 0
-- power-domains: A phandle and symbolic PM domain specifier.
-                 See power/renesas,rcar-sysc.yaml.
-- resets: A list of phandles and specifier pairs.
-- reset-names: Name of the resets.
- - The reset of USB 2.0 host side must be "ehci_ohci"
- - The reset of HS-USB side must be "hs-usb-if"
-
-Example (R-Car H3):
-
-	usb2_clksel: clock-controller@e6590630 {
-		compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
-			     "renesas,rcar-gen3-usb2-clock-sel";
-		reg = <0 0xe6590630 0 0x02>;
-		clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
-			 <&usb_extal>, <&usb_xtal>;
-		clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
-		#clock-cells = <0>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		resets = <&cpg 703>, <&cpg 704>;
-		reset-names = "ehci_ohci", "hs-usb-if";
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
new file mode 100644
index 000000000000..5be1229b3d6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car USB 2.0 clock selector
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+  If you connect an external clock to the USB_EXTAL pin only, you should set
+  the clock rate to "usb_extal" node only.
+  If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
+  is not needed because this is default setting. (Of course, you can set the
+  clock rates to both "usb_extal" and "usb_xtal" nodes.
+
+  Case 1: An external clock connects to R-Car SoC
+    +----------+   +--- R-Car ---------------------+
+    |External  |---|USB_EXTAL ---> all usb channels|
+    |clock     |   |USB_XTAL                       |
+    +----------+   +-------------------------------+
+
+  In this case, we need this driver with "usb_extal" clock.
+
+  Case 2: An oscillator connects to R-Car SoC
+    +----------+   +--- R-Car ---------------------+
+    |Oscillator|---|USB_EXTAL -+-> all usb channels|
+    |          |---|USB_XTAL --+                   |
+    +----------+   +-------------------------------+
+  In this case, we don't need this selector.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7795-rcar-usb2-clock-sel  # R-Car H3
+          - renesas,r8a7796-rcar-usb2-clock-sel  # R-Car M3-W
+          - renesas,r8a77961-rcar-usb2-clock-sel # R-Car M3-W+
+      - const: renesas,rcar-gen3-usb2-clock-sel
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: ehci_ohci
+      - const: hs-usb-if
+      - const: usb_extal
+      - const: usb_xtal
+
+  '#clock-cells':
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 2
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: ehci_ohci
+      - const: hs-usb-if
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - power-domains
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb2_clksel: clock-controller@e6590630 {
+        compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
+                     "renesas,rcar-gen3-usb2-clock-sel";
+        reg = <0xe6590630 0x02>;
+        clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+                 <&usb_extal>, <&usb_xtal>;
+        clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
+        #clock-cells = <0>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 703>, <&cpg 704>;
+        reset-names = "ehci_ohci", "hs-usb-if";
+    };
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
new file mode 100644
index 000000000000..e17143cac316
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu740-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU740 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+  - Zong Li <zong.li@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+
+description:
+  On the FU740 family of SoCs, most system-wide clock and reset integration
+  is via the PRCI IP block.
+  The clock consumer should specify the desired clock via the clock ID
+  macros defined in include/dt-bindings/clock/sifive-fu740-prci.h.
+  These macros begin with PRCI_CLK_.
+
+  The hfclk and rtcclk nodes are required, and represent physical
+  crystals or resonators located on the PCB.  These nodes should be present
+  underneath /, rather than /soc.
+
+properties:
+  compatible:
+    const: sifive,fu740-c000-prci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: high frequency clock.
+      - description: RTL clock.
+
+  clock-names:
+    items:
+      - const: hfclk
+      - const: rtcclk
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    prci: clock-controller@10000000 {
+      compatible = "sifive,fu740-c000-prci";
+      reg = <0x10000000 0x1000>;
+      clocks = <&hfclk>, <&rtcclk>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ffaf833b97ee..041ae90b0d8f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -187,6 +187,8 @@ patternProperties:
     description: CALAO Systems SAS
   "^calxeda,.*":
     description: Calxeda
+  "^canaan,.*":
+    description: Canaan, Inc.
   "^caninos,.*":
     description: Caninos Loucos Program
   "^capella,.*":