diff options
| author | Tony Lindgren <tony@atomide.com> | 2017-01-24 09:18:57 -0600 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-01-25 11:02:29 +0100 |
| commit | 407788b51db6f6aab499d02420082f436abf3238 (patch) | |
| tree | b2fb3c885baf47cd2bd8ee0429f423b352e11905 /drivers/usb | |
| parent | 7a308bb3016f57e5be11a677d15b821536419d36 (diff) | |
usb: musb: Fix host mode error -71 regression
Commit 467d5c980709 ("usb: musb: Implement session bit based runtime PM for
musb-core") started implementing musb generic runtime PM support by
introducing devctl register session bit based state control.
This caused a regression where if a USB mass storage device is connected
to a USB hub, we can get:
usb 1-1: reset high-speed USB device number 2 using musb-hdrc
usb 1-1: device descriptor read/64, error -71
usb 1-1.1: new high-speed USB device number 4 using musb-hdrc
This is because before the USB storage device is connected, musb is
in OTG_STATE_A_SUSPEND. And we currently only set need_finish_resume
in musb_stage0_irq() and the related code calling finish_resume_work
in musb_resume() and musb_runtime_resume() never gets called.
To fix the issue, we can call schedule_delayed_work() directly in
musb_stage0_irq() to have finish_resume_work run.
And we should no longer never get interrupts when when suspended.
We have changed musb to no longer need pm_runtime_irqsafe().
The need_finish_resume flag was added in commit 9298b4aad37e ("usb:
musb: fix device hotplug behind hub") and no longer applies as far
as I can tell. So let's just remove the earlier code that no longer
is needed.
Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core")
Reported-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/musb/musb_core.c | 15 | ||||
| -rw-r--r-- | drivers/usb/musb/musb_core.h | 1 |
2 files changed, 2 insertions, 14 deletions
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fca288bbc800..cd40467be3c5 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -594,11 +594,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, | MUSB_PORT_STAT_RESUME; musb->rh_timer = jiffies + msecs_to_jiffies(USB_RESUME_TIMEOUT); - musb->need_finish_resume = 1; - musb->xceiv->otg->state = OTG_STATE_A_HOST; musb->is_active = 1; musb_host_resume_root_hub(musb); + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(USB_RESUME_TIMEOUT)); break; case OTG_STATE_B_WAIT_ACON: musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; @@ -2710,11 +2710,6 @@ static int musb_resume(struct device *dev) mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV; if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status = 0; - if (musb->need_finish_resume) { - musb->need_finish_resume = 0; - schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(USB_RESUME_TIMEOUT)); - } /* * The USB HUB code expects the device to be in RPM_ACTIVE once it came @@ -2766,12 +2761,6 @@ static int musb_runtime_resume(struct device *dev) musb_restore_context(musb); - if (musb->need_finish_resume) { - musb->need_finish_resume = 0; - schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(USB_RESUME_TIMEOUT)); - } - spin_lock_irqsave(&musb->lock, flags); error = musb_run_resume_work(musb); if (error) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index ade902ea1221..ce5a18c98c6d 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -410,7 +410,6 @@ struct musb { /* is_suspended means USB B_PERIPHERAL suspend */ unsigned is_suspended:1; - unsigned need_finish_resume :1; /* may_wakeup means remote wakeup is enabled */ unsigned may_wakeup:1; |