From 407788b51db6f6aab499d02420082f436abf3238 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 24 Jan 2017 09:18:57 -0600 Subject: usb: musb: Fix host mode error -71 regression Commit 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") started implementing musb generic runtime PM support by introducing devctl register session bit based state control. This caused a regression where if a USB mass storage device is connected to a USB hub, we can get: usb 1-1: reset high-speed USB device number 2 using musb-hdrc usb 1-1: device descriptor read/64, error -71 usb 1-1.1: new high-speed USB device number 4 using musb-hdrc This is because before the USB storage device is connected, musb is in OTG_STATE_A_SUSPEND. And we currently only set need_finish_resume in musb_stage0_irq() and the related code calling finish_resume_work in musb_resume() and musb_runtime_resume() never gets called. To fix the issue, we can call schedule_delayed_work() directly in musb_stage0_irq() to have finish_resume_work run. And we should no longer never get interrupts when when suspended. We have changed musb to no longer need pm_runtime_irqsafe(). The need_finish_resume flag was added in commit 9298b4aad37e ("usb: musb: fix device hotplug behind hub") and no longer applies as far as I can tell. So let's just remove the earlier code that no longer is needed. Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") Reported-by: Bin Liu Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 15 ++------------- drivers/usb/musb/musb_core.h | 1 - 2 files changed, 2 insertions(+), 14 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fca288bbc800..cd40467be3c5 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -594,11 +594,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, | MUSB_PORT_STAT_RESUME; musb->rh_timer = jiffies + msecs_to_jiffies(USB_RESUME_TIMEOUT); - musb->need_finish_resume = 1; - musb->xceiv->otg->state = OTG_STATE_A_HOST; musb->is_active = 1; musb_host_resume_root_hub(musb); + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(USB_RESUME_TIMEOUT)); break; case OTG_STATE_B_WAIT_ACON: musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; @@ -2710,11 +2710,6 @@ static int musb_resume(struct device *dev) mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV; if ((devctl & mask) != (musb->context.devctl & mask)) musb->port1_status = 0; - if (musb->need_finish_resume) { - musb->need_finish_resume = 0; - schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(USB_RESUME_TIMEOUT)); - } /* * The USB HUB code expects the device to be in RPM_ACTIVE once it came @@ -2766,12 +2761,6 @@ static int musb_runtime_resume(struct device *dev) musb_restore_context(musb); - if (musb->need_finish_resume) { - musb->need_finish_resume = 0; - schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(USB_RESUME_TIMEOUT)); - } - spin_lock_irqsave(&musb->lock, flags); error = musb_run_resume_work(musb); if (error) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index ade902ea1221..ce5a18c98c6d 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -410,7 +410,6 @@ struct musb { /* is_suspended means USB B_PERIPHERAL suspend */ unsigned is_suspended:1; - unsigned need_finish_resume :1; /* may_wakeup means remote wakeup is enabled */ unsigned may_wakeup:1; -- cgit v1.2.3