summaryrefslogtreecommitdiff
path: root/arch/ppc/8xx_io
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/ppc/8xx_io
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/ppc/8xx_io')
-rw-r--r--arch/ppc/8xx_io/Kconfig138
-rw-r--r--arch/ppc/8xx_io/Makefile10
-rw-r--r--arch/ppc/8xx_io/commproc.c464
-rw-r--r--arch/ppc/8xx_io/cs4218.h167
-rw-r--r--arch/ppc/8xx_io/cs4218_tdm.c2836
-rw-r--r--arch/ppc/8xx_io/enet.c971
-rw-r--r--arch/ppc/8xx_io/fec.c1973
-rw-r--r--arch/ppc/8xx_io/micropatch.c744
8 files changed, 7303 insertions, 0 deletions
diff --git a/arch/ppc/8xx_io/Kconfig b/arch/ppc/8xx_io/Kconfig
new file mode 100644
index 000000000000..9e2227ec3b34
--- /dev/null
+++ b/arch/ppc/8xx_io/Kconfig
@@ -0,0 +1,138 @@
+#
+# MPC8xx Communication options
+#
+
+menu "MPC8xx CPM Options"
+ depends on 8xx
+
+config SCC_ENET
+ bool "CPM SCC Ethernet"
+ depends on NET_ETHERNET
+ help
+ Enable Ethernet support via the Motorola MPC8xx serial
+ communications controller.
+
+choice
+ prompt "SCC used for Ethernet"
+ depends on SCC_ENET
+ default SCC1_ENET
+
+config SCC1_ENET
+ bool "SCC1"
+ help
+ Use MPC8xx serial communications controller 1 to drive Ethernet
+ (default).
+
+config SCC2_ENET
+ bool "SCC2"
+ help
+ Use MPC8xx serial communications controller 2 to drive Ethernet.
+
+config SCC3_ENET
+ bool "SCC3"
+ help
+ Use MPC8xx serial communications controller 3 to drive Ethernet.
+
+endchoice
+
+config FEC_ENET
+ bool "860T FEC Ethernet"
+ depends on NET_ETHERNET
+ help
+ Enable Ethernet support via the Fast Ethernet Controller (FCC) on
+ the Motorola MPC8260.
+
+config USE_MDIO
+ bool "Use MDIO for PHY configuration"
+ depends on FEC_ENET
+ help
+ On some boards the hardware configuration of the ethernet PHY can be
+ used without any software interaction over the MDIO interface, so
+ all MII code can be omitted. Say N here if unsure or if you don't
+ need link status reports.
+
+config FEC_AM79C874
+ bool "Support AMD79C874 PHY"
+ depends on USE_MDIO
+
+config FEC_LXT970
+ bool "Support LXT970 PHY"
+ depends on USE_MDIO
+
+config FEC_LXT971
+ bool "Support LXT971 PHY"
+ depends on USE_MDIO
+
+config FEC_QS6612
+ bool "Support QS6612 PHY"
+ depends on USE_MDIO
+
+config ENET_BIG_BUFFERS
+ bool "Use Big CPM Ethernet Buffers"
+ depends on NET_ETHERNET
+ help
+ Allocate large buffers for MPC8xx Etherenet. Increases throughput
+ and decreases the likelihood of dropped packets, but costs memory.
+
+config HTDMSOUND
+ bool "Embedded Planet HIOX Audio"
+ depends on SOUND=y
+
+# This doesn't really belong here, but it is convenient to ask
+# 8xx specific questions.
+comment "Generic MPC8xx Options"
+
+config 8xx_COPYBACK
+ bool "Copy-Back Data Cache (else Writethrough)"
+ help
+ Saying Y here will cause the cache on an MPC8xx processor to be used
+ in Copy-Back mode. If you say N here, it is used in Writethrough
+ mode.
+
+ If in doubt, say Y here.
+
+config 8xx_CPU6
+ bool "CPU6 Silicon Errata (860 Pre Rev. C)"
+ help
+ MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
+ require workarounds for Linux (and most other OSes to work). If you
+ get a BUG() very early in boot, this might fix the problem. For
+ more details read the document entitled "MPC860 Family Device Errata
+ Reference" on Motorola's website. This option also incurs a
+ performance hit.
+
+ If in doubt, say N here.
+
+choice
+ prompt "Microcode patch selection"
+ default NO_UCODE_PATCH
+ help
+ Help not implemented yet, coming soon.
+
+config NO_UCODE_PATCH
+ bool "None"
+
+config USB_SOF_UCODE_PATCH
+ bool "USB SOF patch"
+ help
+ Help not implemented yet, coming soon.
+
+config I2C_SPI_UCODE_PATCH
+ bool "I2C/SPI relocation patch"
+ help
+ Help not implemented yet, coming soon.
+
+config I2C_SPI_SMC1_UCODE_PATCH
+ bool "I2C/SPI/SMC1 relocation patch"
+ help
+ Help not implemented yet, coming soon.
+
+endchoice
+
+config UCODE_PATCH
+ bool
+ default y
+ depends on !NO_UCODE_PATCH
+
+endmenu
+
diff --git a/arch/ppc/8xx_io/Makefile b/arch/ppc/8xx_io/Makefile
new file mode 100644
index 000000000000..d8760181fe99
--- /dev/null
+++ b/arch/ppc/8xx_io/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux MPC8xx ppc-specific parts of comm processor
+#
+
+obj-y := commproc.o
+
+obj-$(CONFIG_FEC_ENET) += fec.o
+obj-$(CONFIG_SCC_ENET) += enet.o
+obj-$(CONFIG_UCODE_PATCH) += micropatch.o
+obj-$(CONFIG_HTDMSOUND) += cs4218_tdm.o
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
new file mode 100644
index 000000000000..0cc2e7a9cb11
--- /dev/null
+++ b/arch/ppc/8xx_io/commproc.c
@@ -0,0 +1,464 @@
+/*
+ * General Purpose functions for the global management of the
+ * Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space. The allocator for that is here. When the communication
+ * process is reset, we reclaim the memory available. There is
+ * currently no deallocator for this memory.
+ * The amount of space available is platform dependent. On the
+ * MBX, the EPPC software loads additional microcode into the
+ * communication processor, and uses some of the DP ram for this
+ * purpose. Current, the first 512 bytes and the last 256 bytes of
+ * memory are used. Right now I am conservative and only use the
+ * memory that can never be used for microcode. If there are
+ * applications that require more DP ram, we can expand the boundaries
+ * but then we have to be careful of any downloaded microcode.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <asm/mpc8xx.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/8xx_immap.h>
+#include <asm/commproc.h>
+#include <asm/io.h>
+#include <asm/tlbflush.h>
+#include <asm/rheap.h>
+
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep);
+
+static void m8xx_cpm_dpinit(void);
+static uint host_buffer; /* One page of host buffer */
+static uint host_end; /* end + 1 */
+cpm8xx_t *cpmp; /* Pointer to comm processor space */
+
+/* CPM interrupt vector functions.
+*/
+struct cpm_action {
+ void (*handler)(void *, struct pt_regs * regs);
+ void *dev_id;
+};
+static struct cpm_action cpm_vecs[CPMVEC_NR];
+static irqreturn_t cpm_interrupt(int irq, void * dev, struct pt_regs * regs);
+static irqreturn_t cpm_error_interrupt(int irq, void *dev, struct pt_regs * regs);
+static void alloc_host_memory(void);
+/* Define a table of names to identify CPM interrupt handlers in
+ * /proc/interrupts.
+ */
+const char *cpm_int_name[] =
+ { "error", "PC4", "PC5", "SMC2",
+ "SMC1", "SPI", "PC6", "Timer 4",
+ "", "PC7", "PC8", "PC9",
+ "Timer 3", "", "PC10", "PC11",
+ "I2C", "RISC Timer", "Timer 2", "",
+ "IDMA2", "IDMA1", "SDMA error", "PC12",
+ "PC13", "Timer 1", "PC14", "SCC4",
+ "SCC3", "SCC2", "SCC1", "PC15"
+ };
+
+static void
+cpm_mask_irq(unsigned int irq)
+{
+ int cpm_vec = irq - CPM_IRQ_OFFSET;
+
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << cpm_vec);
+}
+
+static void
+cpm_unmask_irq(unsigned int irq)
+{
+ int cpm_vec = irq - CPM_IRQ_OFFSET;
+
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << cpm_vec);
+}
+
+static void
+cpm_ack(unsigned int irq)
+{
+ /* We do not need to do anything here. */
+}
+
+static void
+cpm_eoi(unsigned int irq)
+{
+ int cpm_vec = irq - CPM_IRQ_OFFSET;
+
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr = (1 << cpm_vec);
+}
+
+struct hw_interrupt_type cpm_pic = {
+ .typename = " CPM ",
+ .enable = cpm_unmask_irq,
+ .disable = cpm_mask_irq,
+ .ack = cpm_ack,
+ .end = cpm_eoi,
+};
+
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+
+void
+m8xx_cpm_reset(uint bootpage)
+{
+ volatile immap_t *imp;
+ volatile cpm8xx_t *commproc;
+ pte_t *pte;
+
+ imp = (immap_t *)IMAP_ADDR;
+ commproc = (cpm8xx_t *)&imp->im_cpm;
+
+#ifdef CONFIG_UCODE_PATCH
+ /* Perform a reset.
+ */
+ commproc->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
+
+ /* Wait for it.
+ */
+ while (commproc->cp_cpcr & CPM_CR_FLG);
+
+ cpm_load_patch(imp);
+#endif
+
+ /* Set SDMA Bus Request priority 5.
+ * On 860T, this also enables FEC priority 6. I am not sure
+ * this is what we realy want for some applications, but the
+ * manual recommends it.
+ * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
+ */
+ imp->im_siu_conf.sc_sdcr = 1;
+
+ /* Reclaim the DP memory for our use. */
+ m8xx_cpm_dpinit();
+
+ /* get the PTE for the bootpage */
+ if (!get_pteptr(&init_mm, bootpage, &pte))
+ panic("get_pteptr failed\n");
+
+ /* and make it uncachable */
+ pte_val(*pte) |= _PAGE_NO_CACHE;
+ _tlbie(bootpage);
+
+ host_buffer = bootpage;
+ host_end = host_buffer + PAGE_SIZE;
+
+ /* Tell everyone where the comm processor resides.
+ */
+ cpmp = (cpm8xx_t *)commproc;
+}
+
+/* We used to do this earlier, but have to postpone as long as possible
+ * to ensure the kernel VM is now running.
+ */
+static void
+alloc_host_memory(void)
+{
+ dma_addr_t physaddr;
+
+ /* Set the host page for allocation.
+ */
+ host_buffer = (uint)dma_alloc_coherent(NULL, PAGE_SIZE, &physaddr,
+ GFP_KERNEL);
+ host_end = host_buffer + PAGE_SIZE;
+}
+
+/* This is called during init_IRQ. We used to do it above, but this
+ * was too early since init_IRQ was not yet called.
+ */
+static struct irqaction cpm_error_irqaction = {
+ .handler = cpm_error_interrupt,
+ .mask = CPU_MASK_NONE,
+};
+static struct irqaction cpm_interrupt_irqaction = {
+ .handler = cpm_interrupt,
+ .mask = CPU_MASK_NONE,
+ .name = "CPM cascade",
+};
+
+void
+cpm_interrupt_init(void)
+{
+ int i;
+
+ /* Initialize the CPM interrupt controller.
+ */
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr =
+ (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
+ ((CPM_INTERRUPT/2) << 13) | CICR_HP_MASK;
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr = 0;
+
+ /* install the CPM interrupt controller routines for the CPM
+ * interrupt vectors
+ */
+ for ( i = CPM_IRQ_OFFSET ; i < CPM_IRQ_OFFSET + NR_CPM_INTS ; i++ )
+ irq_desc[i].handler = &cpm_pic;
+
+ /* Set our interrupt handler with the core CPU. */
+ if (setup_irq(CPM_INTERRUPT, &cpm_interrupt_irqaction))
+ panic("Could not allocate CPM IRQ!");
+
+ /* Install our own error handler. */
+ cpm_error_irqaction.name = cpm_int_name[CPMVEC_ERROR];
+ if (setup_irq(CPM_IRQ_OFFSET + CPMVEC_ERROR, &cpm_error_irqaction))
+ panic("Could not allocate CPM error IRQ!");
+
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr |= CICR_IEN;
+}
+
+/*
+ * Get the CPM interrupt vector.
+ */
+int
+cpm_get_irq(struct pt_regs *regs)
+{
+ int cpm_vec;
+
+ /* Get the vector by setting the ACK bit and then reading
+ * the register.
+ */
+ ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1;
+ cpm_vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr;
+ cpm_vec >>= 11;
+
+ return cpm_vec;
+}
+
+/* CPM interrupt controller cascade interrupt.
+*/
+static irqreturn_t
+cpm_interrupt(int irq, void * dev, struct pt_regs * regs)
+{
+ /* This interrupt handler never actually gets called. It is
+ * installed only to unmask the CPM cascade interrupt in the SIU
+ * and to make the CPM cascade interrupt visible in /proc/interrupts.
+ */
+ return IRQ_HANDLED;
+}
+
+/* The CPM can generate the error interrupt when there is a race condition
+ * between generating and masking interrupts. All we have to do is ACK it
+ * and return. This is a no-op function so we don't need any special
+ * tests in the interrupt handler.
+ */
+static irqreturn_t
+cpm_error_interrupt(int irq, void *dev, struct pt_regs *regs)
+{
+ return IRQ_HANDLED;
+}
+
+/* A helper function to translate the handler prototype required by
+ * request_irq() to the handler prototype required by cpm_install_handler().
+ */
+static irqreturn_t
+cpm_handler_helper(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int cpm_vec = irq - CPM_IRQ_OFFSET;
+
+ (*cpm_vecs[cpm_vec].handler)(dev_id, regs);
+
+ return IRQ_HANDLED;
+}
+
+/* Install a CPM interrupt handler.
+ * This routine accepts a CPM interrupt vector in the range 0 to 31.
+ * This routine is retained for backward compatibility. Rather than using
+ * this routine to install a CPM interrupt handler, you can now use
+ * request_irq() with an IRQ in the range CPM_IRQ_OFFSET to
+ * CPM_IRQ_OFFSET + NR_CPM_INTS - 1 (16 to 47).
+ *
+ * Notice that the prototype of the interrupt handler function must be
+ * different depending on whether you install the handler with
+ * request_irq() or cpm_install_handler().
+ */
+void
+cpm_install_handler(int cpm_vec, void (*handler)(void *, struct pt_regs *regs),
+ void *dev_id)
+{
+ int err;
+
+ /* If null handler, assume we are trying to free the IRQ.
+ */
+ if (!handler) {
+ free_irq(CPM_IRQ_OFFSET + cpm_vec, dev_id);
+ return;
+ }
+
+ if (cpm_vecs[cpm_vec].handler != 0)
+ printk(KERN_INFO "CPM interrupt %x replacing %x\n",
+ (uint)handler, (uint)cpm_vecs[cpm_vec].handler);
+ cpm_vecs[cpm_vec].handler = handler;
+ cpm_vecs[cpm_vec].dev_id = dev_id;
+
+ if ((err = request_irq(CPM_IRQ_OFFSET + cpm_vec, cpm_handler_helper,
+ 0, cpm_int_name[cpm_vec], dev_id)))
+ printk(KERN_ERR "request_irq() returned %d for CPM vector %d\n",
+ err, cpm_vec);
+}
+
+/* Free a CPM interrupt handler.
+ * This routine accepts a CPM interrupt vector in the range 0 to 31.
+ * This routine is retained for backward compatibility.
+ */
+void
+cpm_free_handler(int cpm_vec)
+{
+ request_irq(CPM_IRQ_OFFSET + cpm_vec, NULL, 0, 0,
+ cpm_vecs[cpm_vec].dev_id);
+
+ cpm_vecs[cpm_vec].handler = NULL;
+ cpm_vecs[cpm_vec].dev_id = NULL;
+}
+
+/* We also own one page of host buffer space for the allocation of
+ * UART "fifos" and the like.
+ */
+uint
+m8xx_cpm_hostalloc(uint size)
+{
+ uint retloc;
+
+ if (host_buffer == 0)
+ alloc_host_memory();
+
+ if ((host_buffer + size) >= host_end)
+ return(0);
+
+ retloc = host_buffer;
+ host_buffer += size;
+
+ return(retloc);
+}
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * four BRGs, any of which can be wired to any channel.
+ * The internal baud rate clock is the system clock divided by 16.
+ * This assumes the baudrate is 16x oversampled by the uart.
+ */
+#define BRG_INT_CLK (((bd_t *)__res)->bi_intfreq)
+#define BRG_UART_CLK (BRG_INT_CLK/16)
+#define BRG_UART_CLK_DIV16 (BRG_UART_CLK/16)
+
+void
+cpm_setbrg(uint brg, uint rate)
+{
+ volatile uint *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ bp = (uint *)&cpmp->cp_brgc1;
+ bp += brg;
+ /* The BRG has a 12-bit counter. For really slow baud rates (or
+ * really fast processors), we may have to further divide by 16.
+ */
+ if (((BRG_UART_CLK / rate) - 1) < 4096)
+ *bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN;
+ else
+ *bp = (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
+ CPM_BRG_EN | CPM_BRG_DIV16;
+}
+
+/*
+ * dpalloc / dpfree bits.
+ */
+static spinlock_t cpm_dpmem_lock;
+/*
+ * 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up...
+ */
+static rh_block_t cpm_boot_dpmem_rh_block[16];
+static rh_info_t cpm_dpmem_info;
+
+#define CPM_DPMEM_ALIGNMENT 8
+
+void m8xx_cpm_dpinit(void)
+{
+ cpm8xx_t *cp = &((immap_t *)IMAP_ADDR)->im_cpm;
+
+ spin_lock_init(&cpm_dpmem_lock);
+
+ /* Initialize the info header */
+ rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
+ sizeof(cpm_boot_dpmem_rh_block) /
+ sizeof(cpm_boot_dpmem_rh_block[0]),
+ cpm_boot_dpmem_rh_block);
+
+ /*
+ * Attach the usable dpmem area.
+ * XXX: This is actually crap. CPM_DATAONLY_BASE and
+ * CPM_DATAONLY_SIZE are a subset of the available dparm. It varies
+ * with the processor and the microcode patches applied / activated.
+ * But the following should be at least safe.
+ */
+ rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
+}
+
+/*
+ * Allocate the requested size worth of DP memory.
+ * This function used to return an index into the DPRAM area.
+ * Now it returns the actuall physical address of that area.
+ * use m8xx_cpm_dpram_offset() to get the index
+ */
+uint cpm_dpalloc(uint size, uint align)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ cpm_dpmem_info.alignment = align;
+ start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc);
+
+int cpm_dpfree(uint offset)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ ret = rh_free(&cpm_dpmem_info, (void *)offset);
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(cpm_dpfree);
+
+uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ cpm_dpmem_info.alignment = align;
+ start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc_fixed);
+
+void cpm_dpdump(void)
+{
+ rh_dump(&cpm_dpmem_info);
+}
+EXPORT_SYMBOL(cpm_dpdump);
+
+void *cpm_dpram_addr(uint offset)
+{
+ return ((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem + offset;
+}
+EXPORT_SYMBOL(cpm_dpram_addr);
diff --git a/arch/ppc/8xx_io/cs4218.h b/arch/ppc/8xx_io/cs4218.h
new file mode 100644
index 000000000000..a3c38c5a5db2
--- /dev/null
+++ b/arch/ppc/8xx_io/cs4218.h
@@ -0,0 +1,167 @@
+#ifndef _cs4218_h_
+/*
+ * Hacked version of linux/drivers/sound/dmasound/dmasound.h
+ *
+ *
+ * Minor numbers for the sound driver.
+ *
+ * Unfortunately Creative called the codec chip of SB as a DSP. For this
+ * reason the /dev/dsp is reserved for digitized audio use. There is a
+ * device for true DSP processors but it will be called something else.
+ * In v3.0 it's /dev/sndproc but this could be a temporary solution.
+ */
+#define _cs4218_h_
+
+#include <linux/types.h>
+#include <linux/config.h>
+
+#define SND_NDEVS 256 /* Number of supported devices */
+#define SND_DEV_CTL 0 /* Control port /dev/mixer */
+#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM
+ synthesizer and MIDI output) */
+#define SND_DEV_MIDIN 2 /* Raw midi access */
+#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */
+#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */
+#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */
+#define SND_DEV_STATUS 6 /* /dev/sndstat */
+/* #7 not in use now. Was in 2.4. Free for use after v3.0. */
+#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */
+#define SND_DEV_SNDPROC 9 /* /dev/sndproc for programmable devices */
+#define SND_DEV_PSS SND_DEV_SNDPROC
+
+/* switch on various prinks */
+#define DEBUG_DMASOUND 1
+
+#define MAX_AUDIO_DEV 5
+#define MAX_MIXER_DEV 4
+#define MAX_SYNTH_DEV 3
+#define MAX_MIDI_DEV 6
+#define MAX_TIMER_DEV 3
+
+#define MAX_CATCH_RADIUS 10
+
+#define le2be16(x) (((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff))
+#define le2be16dbl(x) (((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff))
+
+#define IOCTL_IN(arg, ret) \
+ do { int error = get_user(ret, (int *)(arg)); \
+ if (error) return error; \
+ } while (0)
+#define IOCTL_OUT(arg, ret) ioctl_return((int *)(arg), ret)
+
+static inline int ioctl_return(int *addr, int value)
+{
+ return value < 0 ? value : put_user(value, addr);
+}
+
+#define HAS_RECORD
+
+ /*
+ * Initialization
+ */
+
+/* description of the set-up applies to either hard or soft settings */
+
+typedef struct {
+ int format; /* AFMT_* */
+ int stereo; /* 0 = mono, 1 = stereo */
+ int size; /* 8/16 bit*/
+ int speed; /* speed */
+} SETTINGS;
+
+ /*
+ * Machine definitions
+ */
+
+typedef struct {
+ const char *name;
+ const char *name2;
+ void (*open)(void);
+ void (*release)(void);
+ void *(*dma_alloc)(unsigned int, int);
+ void (*dma_free)(void *, unsigned int);
+ int (*irqinit)(void);
+#ifdef MODULE
+ void (*irqcleanup)(void);
+#endif
+ void (*init)(void);
+ void (*silence)(void);
+ int (*setFormat)(int);
+ int (*setVolume)(int);
+ int (*setBass)(int);
+ int (*setTreble)(int);
+ int (*setGain)(int);
+ void (*play)(void);
+ void (*record)(void); /* optional */
+ void (*mixer_init)(void); /* optional */
+ int (*mixer_ioctl)(u_int, u_long); /* optional */
+ int (*write_sq_setup)(void); /* optional */
+ int (*read_sq_setup)(void); /* optional */
+ int (*sq_open)(mode_t); /* optional */
+ int (*state_info)(char *, size_t); /* optional */
+ void (*abort_read)(void); /* optional */
+ int min_dsp_speed;
+ int max_dsp_speed;
+ int version ;
+ int hardware_afmts ; /* OSS says we only return h'ware info */
+ /* when queried via SNDCTL_DSP_GETFMTS */
+ int capabilities ; /* low-level reply to SNDCTL_DSP_GETCAPS */
+ SETTINGS default_hard ; /* open() or init() should set something valid */
+ SETTINGS default_soft ; /* you can make it look like old OSS, if you want to */
+} MACHINE;
+
+ /*
+ * Low level stuff
+ */
+
+typedef struct {
+ ssize_t (*ct_ulaw)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
+ ssize_t (*ct_alaw)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
+ ssize_t (*ct_s8)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
+ ssize_t (*ct_u8)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
+ ssize_t (*ct_s16be)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
+ ssize_t (*ct_u16be)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
+ ssize_t (*ct_s16le)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
+ ssize_t (*ct_u16le)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
+} TRANS;
+
+
+ /*
+ * Sound queue stuff, the heart of the driver
+ */
+
+struct sound_queue {
+ /* buffers allocated for this queue */
+ int numBufs; /* real limits on what the user can have */
+ int bufSize; /* in bytes */
+ char **buffers;
+
+ /* current parameters */
+ int locked ; /* params cannot be modified when != 0 */
+ int user_frags ; /* user requests this many */
+ int user_frag_size ; /* of this size */
+ int max_count; /* actual # fragments <= numBufs */
+ int block_size; /* internal block size in bytes */
+ int max_active; /* in-use fragments <= max_count */
+
+ /* it shouldn't be necessary to declare any of these volatile */
+ int front, rear, count;
+ int rear_size;
+ /*
+ * The use of the playing field depends on the hardware
+ *
+ * Atari, PMac: The number of frames that are loaded/playing
+ *
+ * Amiga: Bit 0 is set: a frame is loaded
+ * Bit 1 is set: a frame is playing
+ */
+ int active;
+ wait_queue_head_t action_queue, open_queue, sync_queue;
+ int open_mode;
+ int busy, syncing, xruns, died;
+};
+
+#define SLEEP(queue) interruptible_sleep_on_timeout(&queue, HZ)
+#define WAKE_UP(queue) (wake_up_interruptible(&queue))
+
+#endif /* _cs4218_h_ */
diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c
new file mode 100644
index 000000000000..89fe0ceeaa40
--- /dev/null
+++ b/arch/ppc/8xx_io/cs4218_tdm.c
@@ -0,0 +1,2836 @@
+
+/* This is a modified version of linux/drivers/sound/dmasound.c to
+ * support the CS4218 codec on the 8xx TDM port. Thanks to everyone
+ * that contributed to the dmasound software (which includes me :-).
+ *
+ * The CS4218 is configured in Mode 4, sub-mode 0. This provides
+ * left/right data only on the TDM port, as a 32-bit word, per frame
+ * pulse. The control of the CS4218 is provided by some other means,
+ * like the SPI port.
+ * Dan Malek (dmalek@jlc.net)
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/major.h>
+#include <linux/config.h>
+#include <linux/fcntl.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/sound.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+/* Should probably do something different with this path name.....
+ * Actually, I should just stop using it...
+ */
+#include "cs4218.h"
+#include <linux/soundcard.h>
+
+#include <asm/mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include <asm/commproc.h>
+
+#define DMASND_CS4218 5
+
+#define MAX_CATCH_RADIUS 10
+#define MIN_BUFFERS 4
+#define MIN_BUFSIZE 4
+#define MAX_BUFSIZE 128
+
+#define HAS_8BIT_TABLES
+
+static int sq_unit = -1;
+static int mixer_unit = -1;
+static int state_unit = -1;
+static int irq_installed = 0;
+static char **sound_buffers = NULL;
+static char **sound_read_buffers = NULL;
+
+static DEFINE_SPINLOCK(cs4218_lock);
+
+/* Local copies of things we put in the control register. Output
+ * volume, like most codecs is really attenuation.
+ */
+static int cs4218_rate_index;
+
+/*
+ * Stuff for outputting a beep. The values range from -327 to +327
+ * so we can multiply by an amplitude in the range 0..100 to get a
+ * signed short value to put in the output buffer.
+ */
+static short beep_wform[256] = {
+ 0, 40, 79, 117, 153, 187, 218, 245,
+ 269, 288, 304, 316, 323, 327, 327, 324,
+ 318, 310, 299, 288, 275, 262, 249, 236,
+ 224, 213, 204, 196, 190, 186, 183, 182,
+ 182, 183, 186, 189, 192, 196, 200, 203,
+ 206, 208, 209, 209, 209, 207, 204, 201,
+ 197, 193, 188, 183, 179, 174, 170, 166,
+ 163, 161, 160, 159, 159, 160, 161, 162,
+ 164, 166, 168, 169, 171, 171, 171, 170,
+ 169, 167, 163, 159, 155, 150, 144, 139,
+ 133, 128, 122, 117, 113, 110, 107, 105,
+ 103, 103, 103, 103, 104, 104, 105, 105,
+ 105, 103, 101, 97, 92, 86, 78, 68,
+ 58, 45, 32, 18, 3, -11, -26, -41,
+ -55, -68, -79, -88, -95, -100, -102, -102,
+ -99, -93, -85, -75, -62, -48, -33, -16,
+ 0, 16, 33, 48, 62, 75, 85, 93,
+ 99, 102, 102, 100, 95, 88, 79, 68,
+ 55, 41, 26, 11, -3, -18, -32, -45,
+ -58, -68, -78, -86, -92, -97, -101, -103,
+ -105, -105, -105, -104, -104, -103, -103, -103,
+ -103, -105, -107, -110, -113, -117, -122, -128,
+ -133, -139, -144, -150, -155, -159, -163, -167,
+ -169, -170, -171, -171, -171, -169, -168, -166,
+ -164, -162, -161, -160, -159, -159, -160, -161,
+ -163, -166, -170, -174, -179, -183, -188, -193,
+ -197, -201, -204, -207, -209, -209, -209, -208,
+ -206, -203, -200, -196, -192, -189, -186, -183,
+ -182, -182, -183, -186, -190, -196, -204, -213,
+ -224, -236, -249, -262, -275, -288, -299, -310,
+ -318, -324, -327, -327, -323, -316, -304, -288,
+ -269, -245, -218, -187, -153, -117, -79, -40,
+};
+
+#define BEEP_SPEED 5 /* 22050 Hz sample rate */
+#define BEEP_BUFLEN 512
+#define BEEP_VOLUME 15 /* 0 - 100 */
+
+static int beep_volume = BEEP_VOLUME;
+static int beep_playing = 0;
+static int beep_state = 0;
+static short *beep_buf;
+static void (*orig_mksound)(unsigned int, unsigned int);
+
+/* This is found someplace else......I guess in the keyboard driver
+ * we don't include.
+ */
+static void (*kd_mksound)(unsigned int, unsigned int);
+
+static int catchRadius = 0;
+static int numBufs = 4, bufSize = 32;
+static int numReadBufs = 4, readbufSize = 32;
+
+
+/* TDM/Serial transmit and receive buffer descriptors.
+*/
+static volatile cbd_t *rx_base, *rx_cur, *tx_base, *tx_cur;
+
+MODULE_PARM(catchRadius, "i");
+MODULE_PARM(numBufs, "i");
+MODULE_PARM(bufSize, "i");
+MODULE_PARM(numreadBufs, "i");
+MODULE_PARM(readbufSize, "i");
+
+#define arraysize(x) (sizeof(x)/sizeof(*(x)))
+#define le2be16(x) (((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff))
+#define le2be16dbl(x) (((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff))
+
+#define IOCTL_IN(arg, ret) \
+ do { int error = get_user(ret, (int *)(arg)); \
+ if (error) return error; \
+ } while (0)
+#define IOCTL_OUT(arg, ret) ioctl_return((int *)(arg), ret)
+
+/* CS4218 serial port control in mode 4.
+*/
+#define CS_INTMASK ((uint)0x40000000)
+#define CS_DO1 ((uint)0x20000000)
+#define CS_LATTEN ((uint)0x1f000000)
+#define CS_RATTEN ((uint)0x00f80000)
+#define CS_MUTE ((uint)0x00040000)
+#define CS_ISL ((uint)0x00020000)
+#define CS_ISR ((uint)0x00010000)
+#define CS_LGAIN ((uint)0x0000f000)
+#define CS_RGAIN ((uint)0x00000f00)
+
+#define CS_LATTEN_SET(X) (((X) & 0x1f) << 24)
+#define CS_RATTEN_SET(X) (((X) & 0x1f) << 19)
+#define CS_LGAIN_SET(X) (((X) & 0x0f) << 12)
+#define CS_RGAIN_SET(X) (((X) & 0x0f) << 8)
+
+#define CS_LATTEN_GET(X) (((X) >> 24) & 0x1f)
+#define CS_RATTEN_GET(X) (((X) >> 19) & 0x1f)
+#define CS_LGAIN_GET(X) (((X) >> 12) & 0x0f)
+#define CS_RGAIN_GET(X) (((X) >> 8) & 0x0f)
+
+/* The control register is effectively write only. We have to keep a copy
+ * of what we write.
+ */
+static uint cs4218_control;
+
+/* A place to store expanding information.
+*/
+static int expand_bal;
+static int expand_data;
+
+/* Since I can't make the microcode patch work for the SPI, I just
+ * clock the bits using software.
+ */
+static void sw_spi_init(void);
+static void sw_spi_io(u_char *obuf, u_char *ibuf, uint bcnt);
+static uint cs4218_ctl_write(uint ctlreg);
+
+/*** Some low level helpers **************************************************/
+
+/* 16 bit mu-law */
+
+static short ulaw2dma16[] = {
+ -32124, -31100, -30076, -29052, -28028, -27004, -25980, -24956,
+ -23932, -22908, -21884, -20860, -19836, -18812, -17788, -16764,
+ -15996, -15484, -14972, -14460, -13948, -13436, -12924, -12412,
+ -11900, -11388, -10876, -10364, -9852, -9340, -8828, -8316,
+ -7932, -7676, -7420, -7164, -6908, -6652, -6396, -6140,
+ -5884, -5628, -5372, -5116, -4860, -4604, -4348, -4092,
+ -3900, -3772, -3644, -3516, -3388, -3260, -3132, -3004,
+ -2876, -2748, -2620, -2492, -2364, -2236, -2108, -1980,
+ -1884, -1820, -1756, -1692, -1628, -1564, -1500, -1436,
+ -1372, -1308, -1244, -1180, -1116, -1052, -988, -924,
+ -876, -844, -812, -780, -748, -716, -684, -652,
+ -620, -588, -556, -524, -492, -460, -428, -396,
+ -372, -356, -340, -324, -308, -292, -276, -260,
+ -244, -228, -212, -196, -180, -164, -148, -132,
+ -120, -112, -104, -96, -88, -80, -72, -64,
+ -56, -48, -40, -32, -24, -16, -8, 0,
+ 32124, 31100, 30076, 29052, 28028, 27004, 25980, 24956,
+ 23932, 22908, 21884, 20860, 19836, 18812, 17788, 16764,
+ 15996, 15484, 14972, 14460, 13948, 13436, 12924, 12412,
+ 11900, 11388, 10876, 10364, 9852, 9340, 8828, 8316,
+ 7932, 7676, 7420, 7164, 6908, 6652, 6396, 6140,
+ 5884, 5628, 5372, 5116, 4860, 4604, 4348, 4092,
+ 3900, 3772, 3644, 3516, 3388, 3260, 3132, 3004,
+ 2876, 2748, 2620, 2492, 2364, 2236, 2108, 1980,
+ 1884, 1820, 1756, 1692, 1628, 1564, 1500, 1436,
+ 1372, 1308, 1244, 1180, 1116, 1052, 988, 924,
+ 876, 844, 812, 780, 748, 716, 684, 652,
+ 620, 588, 556, 524, 492, 460, 428, 396,
+ 372, 356, 340, 324, 308, 292, 276, 260,
+ 244, 228, 212, 196, 180, 164, 148, 132,
+ 120, 112, 104, 96, 88, 80, 72, 64,
+ 56, 48, 40, 32, 24, 16, 8, 0,
+};
+
+/* 16 bit A-law */
+
+static short alaw2dma16[] = {
+ -5504, -5248, -6016, -5760, -4480, -4224, -4992, -4736,
+ -7552, -7296, -8064, -7808, -6528, -6272, -7040, -6784,
+ -2752, -2624, -3008, -2880, -2240, -2112, -2496, -2368,
+ -3776, -3648, -4032, -3904, -3264, -3136, -3520, -3392,
+ -22016, -20992, -24064, -23040, -17920, -16896, -19968, -18944,
+ -30208, -29184, -32256, -31232, -26112, -25088, -28160, -27136,
+ -11008, -10496, -12032, -11520, -8960, -8448, -9984, -9472,
+ -15104, -14592, -16128, -15616, -13056, -12544, -14080, -13568,
+ -344, -328, -376, -360, -280, -264, -312, -296,
+ -472, -456, -504, -488, -408, -392, -440, -424,
+ -88, -72, -120, -104, -24, -8, -56, -40,
+ -216, -200, -248, -232, -152, -136, -184, -168,
+ -1376, -1312, -1504, -1440, -1120, -1056, -1248, -1184,
+ -1888, -1824, -2016, -1952, -1632, -1568, -1760, -1696,
+ -688, -656, -752, -720, -560, -528, -624, -592,
+ -944, -912, -1008, -976, -816, -784, -880, -848,
+ 5504, 5248, 6016, 5760, 4480, 4224, 4992, 4736,
+ 7552, 7296, 8064, 7808, 6528, 6272, 7040, 6784,
+ 2752, 2624, 3008, 2880, 2240, 2112, 2496, 2368,
+ 3776, 3648, 4032, 3904, 3264, 3136, 3520, 3392,
+ 22016, 20992, 24064, 23040, 17920, 16896, 19968, 18944,
+ 30208, 29184, 32256, 31232, 26112, 25088, 28160, 27136,
+ 11008, 10496, 12032, 11520, 8960, 8448, 9984, 9472,
+ 15104, 14592, 16128, 15616, 13056, 12544, 14080, 13568,
+ 344, 328, 376, 360, 280, 264, 312, 296,
+ 472, 456, 504, 488, 408, 392, 440, 424,
+ 88, 72, 120, 104, 24, 8, 56, 40,
+ 216, 200, 248, 232, 152, 136, 184, 168,
+ 1376, 1312, 1504, 1440, 1120, 1056, 1248, 1184,
+ 1888, 1824, 2016, 1952, 1632, 1568, 1760, 1696,
+ 688, 656, 752, 720, 560, 528, 624, 592,
+ 944, 912, 1008, 976, 816, 784, 880, 848,
+};
+
+
+/*** Translations ************************************************************/
+
+
+static ssize_t cs4218_ct_law(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ct_s8(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ct_u8(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ct_s16(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ct_u16(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ctx_law(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ctx_s8(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ctx_u8(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ctx_s16(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ctx_u16(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ct_s16_read(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t cs4218_ct_u16_read(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+
+
+/*** Low level stuff *********************************************************/
+
+struct cs_sound_settings {
+ MACHINE mach; /* machine dependent things */
+ SETTINGS hard; /* hardware settings */
+ SETTINGS soft; /* software settings */
+ SETTINGS dsp; /* /dev/dsp default settings */
+ TRANS *trans_write; /* supported translations for playback */
+ TRANS *trans_read; /* supported translations for record */
+ int volume_left; /* volume (range is machine dependent) */
+ int volume_right;
+ int bass; /* tone (range is machine dependent) */
+ int treble;
+ int gain;
+ int minDev; /* minor device number currently open */
+};
+
+static struct cs_sound_settings sound;
+
+static void *CS_Alloc(unsigned int size, int flags);
+static void CS_Free(void *ptr, unsigned int size);
+static int CS_IrqInit(void);
+#ifdef MODULE
+static void CS_IrqCleanup(void);
+#endif /* MODULE */
+static void CS_Silence(void);
+static void CS_Init(void);
+static void CS_Play(void);
+static void CS_Record(void);
+static int CS_SetFormat(int format);
+static int CS_SetVolume(int volume);
+static void cs4218_tdm_tx_intr(void *devid);
+static void cs4218_tdm_rx_intr(void *devid);
+static void cs4218_intr(void *devid, struct pt_regs *regs);
+static int cs_get_volume(uint reg);
+static int cs_volume_setter(int volume, int mute);
+static int cs_get_gain(uint reg);
+static int cs_set_gain(int gain);
+static void cs_mksound(unsigned int hz, unsigned int ticks);
+static void cs_nosound(unsigned long xx);
+
+/*** Mid level stuff *********************************************************/
+
+
+static void sound_silence(void);
+static void sound_init(void);
+static int sound_set_format(int format);
+static int sound_set_speed(int speed);
+static int sound_set_stereo(int stereo);
+static int sound_set_volume(int volume);
+
+static ssize_t sound_copy_translate(const u_char *userPtr,
+ size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+static ssize_t sound_copy_translate_read(const u_char *userPtr,
+ size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft);
+
+
+/*
+ * /dev/mixer abstraction
+ */
+
+struct sound_mixer {
+ int busy;
+ int modify_counter;
+};
+
+static struct sound_mixer mixer;
+
+static struct sound_queue sq;
+static struct sound_queue read_sq;
+
+#define sq_block_address(i) (sq.buffers[i])
+#define SIGNAL_RECEIVED (signal_pending(current))
+#define NON_BLOCKING(open_mode) (open_mode & O_NONBLOCK)
+#define ONE_SECOND HZ /* in jiffies (100ths of a second) */
+#define NO_TIME_LIMIT 0xffffffff
+
+/*
+ * /dev/sndstat
+ */
+
+struct sound_state {
+ int busy;
+ char buf[512];
+ int len, ptr;
+};
+
+static struct sound_state state;
+
+/*** Common stuff ********************************************************/
+
+static long long sound_lseek(struct file *file, long long offset, int orig);
+
+/*** Config & Setup **********************************************************/
+
+void dmasound_setup(char *str, int *ints);
+
+/*** Translations ************************************************************/
+
+
+/* ++TeSche: radically changed for new expanding purposes...
+ *
+ * These two routines now deal with copying/expanding/translating the samples
+ * from user space into our buffer at the right frequency. They take care about
+ * how much data there's actually to read, how much buffer space there is and
+ * to convert samples into the right frequency/encoding. They will only work on
+ * complete samples so it may happen they leave some bytes in the input stream
+ * if the user didn't write a multiple of the current sample size. They both
+ * return the number of bytes they've used from both streams so you may detect
+ * such a situation. Luckily all programs should be able to cope with that.
+ *
+ * I think I've optimized anything as far as one can do in plain C, all
+ * variables should fit in registers and the loops are really short. There's
+ * one loop for every possible situation. Writing a more generalized and thus
+ * parameterized loop would only produce slower code. Feel free to optimize
+ * this in assembler if you like. :)
+ *
+ * I think these routines belong here because they're not yet really hardware
+ * independent, especially the fact that the Falcon can play 16bit samples
+ * only in stereo is hardcoded in both of them!
+ *
+ * ++geert: split in even more functions (one per format)
+ */
+
+static ssize_t cs4218_ct_law(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ short *table = sound.soft.format == AFMT_MU_LAW ? ulaw2dma16: alaw2dma16;
+ ssize_t count, used;
+ short *p = (short *) &frame[*frameUsed];
+ int val, stereo = sound.soft.stereo;
+
+ frameLeft >>= 2;
+ if (stereo)
+ userCount >>= 1;
+ used = count = min(userCount, frameLeft);
+ while (count > 0) {
+ u_char data;
+ if (get_user(data, userPtr++))
+ return -EFAULT;
+ val = table[data];
+ *p++ = val;
+ if (stereo) {
+ if (get_user(data, userPtr++))
+ return -EFAULT;
+ val = table[data];
+ }
+ *p++ = val;
+ count--;
+ }
+ *frameUsed += used * 4;
+ return stereo? used * 2: used;
+}
+
+
+static ssize_t cs4218_ct_s8(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ ssize_t count, used;
+ short *p = (short *) &frame[*frameUsed];
+ int val, stereo = sound.soft.stereo;
+
+ frameLeft >>= 2;
+ if (stereo)
+ userCount >>= 1;
+ used = count = min(userCount, frameLeft);
+ while (count > 0) {
+ u_char data;
+ if (get_user(data, userPtr++))
+ return -EFAULT;
+ val = data << 8;
+ *p++ = val;
+ if (stereo) {
+ if (get_user(data, userPtr++))
+ return -EFAULT;
+ val = data << 8;
+ }
+ *p++ = val;
+ count--;
+ }
+ *frameUsed += used * 4;
+ return stereo? used * 2: used;
+}
+
+
+static ssize_t cs4218_ct_u8(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ ssize_t count, used;
+ short *p = (short *) &frame[*frameUsed];
+ int val, stereo = sound.soft.stereo;
+
+ frameLeft >>= 2;
+ if (stereo)
+ userCount >>= 1;
+ used = count = min(userCount, frameLeft);
+ while (count > 0) {
+ u_char data;
+ if (get_user(data, userPtr++))
+ return -EFAULT;
+ val = (data ^ 0x80) << 8;
+ *p++ = val;
+ if (stereo) {
+ if (get_user(data, userPtr++))
+ return -EFAULT;
+ val = (data ^ 0x80) << 8;
+ }
+ *p++ = val;
+ count--;
+ }
+ *frameUsed += used * 4;
+ return stereo? used * 2: used;
+}
+
+
+/* This is the default format of the codec. Signed, 16-bit stereo
+ * generated by an application shouldn't have to be copied at all.
+ * We should just get the phsical address of the buffers and update
+ * the TDM BDs directly.
+ */
+static ssize_t cs4218_ct_s16(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ ssize_t count, used;
+ int stereo = sound.soft.stereo;
+ short *fp = (short *) &frame[*frameUsed];
+
+ frameLeft >>= 2;
+ userCount >>= (stereo? 2: 1);
+ used = count = min(userCount, frameLeft);
+ if (!stereo) {
+ short *up = (short *) userPtr;
+ while (count > 0) {
+ short data;
+ if (get_user(data, up++))
+ return -EFAULT;
+ *fp++ = data;
+ *fp++ = data;
+ count--;
+ }
+ } else {
+ if (copy_from_user(fp, userPtr, count * 4))
+ return -EFAULT;
+ }
+ *frameUsed += used * 4;
+ return stereo? used * 4: used * 2;
+}
+
+static ssize_t cs4218_ct_u16(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ ssize_t count, used;
+ int mask = (sound.soft.format == AFMT_U16_LE? 0x0080: 0x8000);
+ int stereo = sound.soft.stereo;
+ short *fp = (short *) &frame[*frameUsed];
+ short *up = (short *) userPtr;
+
+ frameLeft >>= 2;
+ userCount >>= (stereo? 2: 1);
+ used = count = min(userCount, frameLeft);
+ while (count > 0) {
+ int data;
+ if (get_user(data, up++))
+ return -EFAULT;
+ data ^= mask;
+ *fp++ = data;
+ if (stereo) {
+ if (get_user(data, up++))
+ return -EFAULT;
+ data ^= mask;
+ }
+ *fp++ = data;
+ count--;
+ }
+ *frameUsed += used * 4;
+ return stereo? used * 4: used * 2;
+}
+
+
+static ssize_t cs4218_ctx_law(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ unsigned short *table = (unsigned short *)
+ (sound.soft.format == AFMT_MU_LAW ? ulaw2dma16: alaw2dma16);
+ unsigned int data = expand_data;
+ unsigned int *p = (unsigned int *) &frame[*frameUsed];
+ int bal = expand_bal;
+ int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed;
+ int utotal, ftotal;
+ int stereo = sound.soft.stereo;
+
+ frameLeft >>= 2;
+ if (stereo)
+ userCount >>= 1;
+ ftotal = frameLeft;
+ utotal = userCount;
+ while (frameLeft) {
+ u_char c;
+ if (bal < 0) {
+ if (userCount == 0)
+ break;
+ if (get_user(c, userPtr++))
+ return -EFAULT;
+ data = table[c];
+ if (stereo) {
+ if (get_user(c, userPtr++))
+ return -EFAULT;
+ data = (data << 16) + table[c];
+ } else
+ data = (data << 16) + data;
+ userCount--;
+ bal += hSpeed;
+ }
+ *p++ = data;
+ frameLeft--;
+ bal -= sSpeed;
+ }
+ expand_bal = bal;
+ expand_data = data;
+ *frameUsed += (ftotal - frameLeft) * 4;
+ utotal -= userCount;
+ return stereo? utotal * 2: utotal;
+}
+
+
+static ssize_t cs4218_ctx_s8(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ unsigned int *p = (unsigned int *) &frame[*frameUsed];
+ unsigned int data = expand_data;
+ int bal = expand_bal;
+ int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed;
+ int stereo = sound.soft.stereo;
+ int utotal, ftotal;
+
+ frameLeft >>= 2;
+ if (stereo)
+ userCount >>= 1;
+ ftotal = frameLeft;
+ utotal = userCount;
+ while (frameLeft) {
+ u_char c;
+ if (bal < 0) {
+ if (userCount == 0)
+ break;
+ if (get_user(c, userPtr++))
+ return -EFAULT;
+ data = c << 8;
+ if (stereo) {
+ if (get_user(c, userPtr++))
+ return -EFAULT;
+ data = (data << 16) + (c << 8);
+ } else
+ data = (data << 16) + data;
+ userCount--;
+ bal += hSpeed;
+ }
+ *p++ = data;
+ frameLeft--;
+ bal -= sSpeed;
+ }
+ expand_bal = bal;
+ expand_data = data;
+ *frameUsed += (ftotal - frameLeft) * 4;
+ utotal -= userCount;
+ return stereo? utotal * 2: utotal;
+}
+
+
+static ssize_t cs4218_ctx_u8(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ unsigned int *p = (unsigned int *) &frame[*frameUsed];
+ unsigned int data = expand_data;
+ int bal = expand_bal;
+ int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed;
+ int stereo = sound.soft.stereo;
+ int utotal, ftotal;
+
+ frameLeft >>= 2;
+ if (stereo)
+ userCount >>= 1;
+ ftotal = frameLeft;
+ utotal = userCount;
+ while (frameLeft) {
+ u_char c;
+ if (bal < 0) {
+ if (userCount == 0)
+ break;
+ if (get_user(c, userPtr++))
+ return -EFAULT;
+ data = (c ^ 0x80) << 8;
+ if (stereo) {
+ if (get_user(c, userPtr++))
+ return -EFAULT;
+ data = (data << 16) + ((c ^ 0x80) << 8);
+ } else
+ data = (data << 16) + data;
+ userCount--;
+ bal += hSpeed;
+ }
+ *p++ = data;
+ frameLeft--;
+ bal -= sSpeed;
+ }
+ expand_bal = bal;
+ expand_data = data;
+ *frameUsed += (ftotal - frameLeft) * 4;
+ utotal -= userCount;
+ return stereo? utotal * 2: utotal;
+}
+
+
+static ssize_t cs4218_ctx_s16(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ unsigned int *p = (unsigned int *) &frame[*frameUsed];
+ unsigned int data = expand_data;
+ unsigned short *up = (unsigned short *) userPtr;
+ int bal = expand_bal;
+ int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed;
+ int stereo = sound.soft.stereo;
+ int utotal, ftotal;
+
+ frameLeft >>= 2;
+ userCount >>= (stereo? 2: 1);
+ ftotal = frameLeft;
+ utotal = userCount;
+ while (frameLeft) {
+ unsigned short c;
+ if (bal < 0) {
+ if (userCount == 0)
+ break;
+ if (get_user(data, up++))
+ return -EFAULT;
+ if (stereo) {
+ if (get_user(c, up++))
+ return -EFAULT;
+ data = (data << 16) + c;
+ } else
+ data = (data << 16) + data;
+ userCount--;
+ bal += hSpeed;
+ }
+ *p++ = data;
+ frameLeft--;
+ bal -= sSpeed;
+ }
+ expand_bal = bal;
+ expand_data = data;
+ *frameUsed += (ftotal - frameLeft) * 4;
+ utotal -= userCount;
+ return stereo? utotal * 4: utotal * 2;
+}
+
+
+static ssize_t cs4218_ctx_u16(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ int mask = (sound.soft.format == AFMT_U16_LE? 0x0080: 0x8000);
+ unsigned int *p = (unsigned int *) &frame[*frameUsed];
+ unsigned int data = expand_data;
+ unsigned short *up = (unsigned short *) userPtr;
+ int bal = expand_bal;
+ int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed;
+ int stereo = sound.soft.stereo;
+ int utotal, ftotal;
+
+ frameLeft >>= 2;
+ userCount >>= (stereo? 2: 1);
+ ftotal = frameLeft;
+ utotal = userCount;
+ while (frameLeft) {
+ unsigned short c;
+ if (bal < 0) {
+ if (userCount == 0)
+ break;
+ if (get_user(data, up++))
+ return -EFAULT;
+ data ^= mask;
+ if (stereo) {
+ if (get_user(c, up++))
+ return -EFAULT;
+ data = (data << 16) + (c ^ mask);
+ } else
+ data = (data << 16) + data;
+ userCount--;
+ bal += hSpeed;
+ }
+ *p++ = data;
+ frameLeft--;
+ bal -= sSpeed;
+ }
+ expand_bal = bal;
+ expand_data = data;
+ *frameUsed += (ftotal - frameLeft) * 4;
+ utotal -= userCount;
+ return stereo? utotal * 4: utotal * 2;
+}
+
+static ssize_t cs4218_ct_s8_read(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ ssize_t count, used;
+ short *p = (short *) &frame[*frameUsed];
+ int val, stereo = sound.soft.stereo;
+
+ frameLeft >>= 2;
+ if (stereo)
+ userCount >>= 1;
+ used = count = min(userCount, frameLeft);
+ while (count > 0) {
+ u_char data;
+
+ val = *p++;
+ data = val >> 8;
+ if (put_user(data, (u_char *)userPtr++))
+ return -EFAULT;
+ if (stereo) {
+ val = *p;
+ data = val >> 8;
+ if (put_user(data, (u_char *)userPtr++))
+ return -EFAULT;
+ }
+ p++;
+ count--;
+ }
+ *frameUsed += used * 4;
+ return stereo? used * 2: used;
+}
+
+
+static ssize_t cs4218_ct_u8_read(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ ssize_t count, used;
+ short *p = (short *) &frame[*frameUsed];
+ int val, stereo = sound.soft.stereo;
+
+ frameLeft >>= 2;
+ if (stereo)
+ userCount >>= 1;
+ used = count = min(userCount, frameLeft);
+ while (count > 0) {
+ u_char data;
+
+ val = *p++;
+ data = (val >> 8) ^ 0x80;
+ if (put_user(data, (u_char *)userPtr++))
+ return -EFAULT;
+ if (stereo) {
+ val = *p;
+ data = (val >> 8) ^ 0x80;
+ if (put_user(data, (u_char *)userPtr++))
+ return -EFAULT;
+ }
+ p++;
+ count--;
+ }
+ *frameUsed += used * 4;
+ return stereo? used * 2: used;
+}
+
+
+static ssize_t cs4218_ct_s16_read(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ ssize_t count, used;
+ int stereo = sound.soft.stereo;
+ short *fp = (short *) &frame[*frameUsed];
+
+ frameLeft >>= 2;
+ userCount >>= (stereo? 2: 1);
+ used = count = min(userCount, frameLeft);
+ if (!stereo) {
+ short *up = (short *) userPtr;
+ while (count > 0) {
+ short data;
+ data = *fp;
+ if (put_user(data, up++))
+ return -EFAULT;
+ fp+=2;
+ count--;
+ }
+ } else {
+ if (copy_to_user((u_char *)userPtr, fp, count * 4))
+ return -EFAULT;
+ }
+ *frameUsed += used * 4;
+ return stereo? used * 4: used * 2;
+}
+
+static ssize_t cs4218_ct_u16_read(const u_char *userPtr, size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ ssize_t count, used;
+ int mask = (sound.soft.format == AFMT_U16_LE? 0x0080: 0x8000);
+ int stereo = sound.soft.stereo;
+ short *fp = (short *) &frame[*frameUsed];
+ short *up = (short *) userPtr;
+
+ frameLeft >>= 2;
+ userCount >>= (stereo? 2: 1);
+ used = count = min(userCount, frameLeft);
+ while (count > 0) {
+ int data;
+
+ data = *fp++;
+ data ^= mask;
+ if (put_user(data, up++))
+ return -EFAULT;
+ if (stereo) {
+ data = *fp;
+ data ^= mask;
+ if (put_user(data, up++))
+ return -EFAULT;
+ }
+ fp++;
+ count--;
+ }
+ *frameUsed += used * 4;
+ return stereo? used * 4: used * 2;
+}
+
+static TRANS transCSNormal = {
+ cs4218_ct_law, cs4218_ct_law, cs4218_ct_s8, cs4218_ct_u8,
+ cs4218_ct_s16, cs4218_ct_u16, cs4218_ct_s16, cs4218_ct_u16
+};
+
+static TRANS transCSExpand = {
+ cs4218_ctx_law, cs4218_ctx_law, cs4218_ctx_s8, cs4218_ctx_u8,
+ cs4218_ctx_s16, cs4218_ctx_u16, cs4218_ctx_s16, cs4218_ctx_u16
+};
+
+static TRANS transCSNormalRead = {
+ NULL, NULL, cs4218_ct_s8_read, cs4218_ct_u8_read,
+ cs4218_ct_s16_read, cs4218_ct_u16_read,
+ cs4218_ct_s16_read, cs4218_ct_u16_read
+};
+
+/*** Low level stuff *********************************************************/
+
+static void *CS_Alloc(unsigned int size, int flags)
+{
+ int order;
+
+ size >>= 13;
+ for (order=0; order < 5; order++) {
+ if (size == 0)
+ break;
+ size >>= 1;
+ }
+ return (void *)__get_free_pages(flags, order);
+}
+
+static void CS_Free(void *ptr, unsigned int size)
+{
+ int order;
+
+ size >>= 13;
+ for (order=0; order < 5; order++) {
+ if (size == 0)
+ break;
+ size >>= 1;
+ }
+ free_pages((ulong)ptr, order);
+}
+
+static int __init CS_IrqInit(void)
+{
+ cpm_install_handler(CPMVEC_SMC2, cs4218_intr, NULL);
+ return 1;
+}
+
+#ifdef MODULE
+static void CS_IrqCleanup(void)
+{
+ volatile smc_t *sp;
+ volatile cpm8xx_t *cp;
+
+ /* First disable transmitter and receiver.
+ */
+ sp = &cpmp->cp_smc[1];
+ sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+
+ /* And now shut down the SMC.
+ */
+ cp = cpmp; /* Get pointer to Communication Processor */
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2,
+ CPM_CR_STOP_TX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+
+ /* Release the interrupt handler.
+ */
+ cpm_free_handler(CPMVEC_SMC2);
+
+ if (beep_buf)
+ kfree(beep_buf);
+ kd_mksound = orig_mksound;
+}
+#endif /* MODULE */
+
+static void CS_Silence(void)
+{
+ volatile smc_t *sp;
+
+ /* Disable transmitter.
+ */
+ sp = &cpmp->cp_smc[1];
+ sp->smc_smcmr &= ~SMCMR_TEN;
+}
+
+/* Frequencies depend upon external oscillator. There are two
+ * choices, 12.288 and 11.2896 MHz. The RPCG audio supports both through
+ * and external control register selection bit.
+ */
+static int cs4218_freqs[] = {
+ /* 12.288 11.2896 */
+ 48000, 44100,
+ 32000, 29400,
+ 24000, 22050,
+ 19200, 17640,
+ 16000, 14700,
+ 12000, 11025,
+ 9600, 8820,
+ 8000, 7350
+};
+
+static void CS_Init(void)
+{
+ int i, tolerance;
+
+ switch (sound.soft.format) {
+ case AFMT_S16_LE:
+ case AFMT_U16_LE:
+ sound.hard.format = AFMT_S16_LE;
+ break;
+ default:
+ sound.hard.format = AFMT_S16_BE;
+ break;
+ }
+ sound.hard.stereo = 1;
+ sound.hard.size = 16;
+
+ /*
+ * If we have a sample rate which is within catchRadius percent
+ * of the requested value, we don't have to expand the samples.
+ * Otherwise choose the next higher rate.
+ */
+ i = (sizeof(cs4218_freqs) / sizeof(int));
+ do {
+ tolerance = catchRadius * cs4218_freqs[--i] / 100;
+ } while (sound.soft.speed > cs4218_freqs[i] + tolerance && i > 0);
+ if (sound.soft.speed >= cs4218_freqs[i] - tolerance)
+ sound.trans_write = &transCSNormal;
+ else
+ sound.trans_write = &transCSExpand;
+ sound.trans_read = &transCSNormalRead;
+ sound.hard.speed = cs4218_freqs[i];
+ cs4218_rate_index = i;
+
+ /* The CS4218 has seven selectable clock dividers for the sample
+ * clock. The HIOX then provides one of two external rates.
+ * An even numbered frequency table index uses the high external
+ * clock rate.
+ */
+ *(uint *)HIOX_CSR4_ADDR &= ~(HIOX_CSR4_AUDCLKHI | HIOX_CSR4_AUDCLKSEL);
+ if ((i & 1) == 0)
+ *(uint *)HIOX_CSR4_ADDR |= HIOX_CSR4_AUDCLKHI;
+ i >>= 1;
+ *(uint *)HIOX_CSR4_ADDR |= (i & HIOX_CSR4_AUDCLKSEL);
+
+ expand_bal = -sound.soft.speed;
+}
+
+static int CS_SetFormat(int format)
+{
+ int size;
+
+ switch (format) {
+ case AFMT_QUERY:
+ return sound.soft.format;
+ case AFMT_MU_LAW:
+ case AFMT_A_LAW:
+ case AFMT_U8:
+ case AFMT_S8:
+ size = 8;
+ break;
+ case AFMT_S16_BE:
+ case AFMT_U16_BE:
+ case AFMT_S16_LE:
+ case AFMT_U16_LE:
+ size = 16;
+ break;
+ default: /* :-) */
+ printk(KERN_ERR "dmasound: unknown format 0x%x, using AFMT_U8\n",
+ format);
+ size = 8;
+ format = AFMT_U8;
+ }
+
+ sound.soft.format = format;
+ sound.soft.size = size;
+ if (sound.minDev == SND_DEV_DSP) {
+ sound.dsp.format = format;
+ sound.dsp.size = size;
+ }
+
+ CS_Init();
+
+ return format;
+}
+
+/* Volume is the amount of attenuation we tell the codec to impose
+ * on the outputs. There are 32 levels, with 0 the "loudest".
+ */
+#define CS_VOLUME_TO_MASK(x) (31 - ((((x) - 1) * 31) / 99))
+#define CS_MASK_TO_VOLUME(y) (100 - ((y) * 99 / 31))
+
+static int cs_get_volume(uint reg)
+{
+ int volume;
+
+ volume = CS_MASK_TO_VOLUME(CS_LATTEN_GET(reg));
+ volume |= CS_MASK_TO_VOLUME(CS_RATTEN_GET(reg)) << 8;
+ return volume;
+}
+
+static int cs_volume_setter(int volume, int mute)
+{
+ uint tempctl;
+
+ if (mute && volume == 0) {
+ tempctl = cs4218_control | CS_MUTE;
+ } else {
+ tempctl = cs4218_control & ~CS_MUTE;
+ tempctl = tempctl & ~(CS_LATTEN | CS_RATTEN);
+ tempctl |= CS_LATTEN_SET(CS_VOLUME_TO_MASK(volume & 0xff));
+ tempctl |= CS_RATTEN_SET(CS_VOLUME_TO_MASK((volume >> 8) & 0xff));
+ volume = cs_get_volume(tempctl);
+ }
+ if (tempctl != cs4218_control) {
+ cs4218_ctl_write(tempctl);
+ }
+ return volume;
+}
+
+
+/* Gain has 16 steps from 0 to 15. These are in 1.5dB increments from
+ * 0 (no gain) to 22.5 dB.
+ */
+#define CS_RECLEVEL_TO_GAIN(v) \
+ ((v) < 0 ? 0 : (v) > 100 ? 15 : (v) * 3 / 20)
+#define CS_GAIN_TO_RECLEVEL(v) (((v) * 20 + 2) / 3)
+
+static int cs_get_gain(uint reg)
+{
+ int gain;
+
+ gain = CS_GAIN_TO_RECLEVEL(CS_LGAIN_GET(reg));
+ gain |= CS_GAIN_TO_RECLEVEL(CS_RGAIN_GET(reg)) << 8;
+ return gain;
+}
+
+static int cs_set_gain(int gain)
+{
+ uint tempctl;
+
+ tempctl = cs4218_control & ~(CS_LGAIN | CS_RGAIN);
+ tempctl |= CS_LGAIN_SET(CS_RECLEVEL_TO_GAIN(gain & 0xff));
+ tempctl |= CS_RGAIN_SET(CS_RECLEVEL_TO_GAIN((gain >> 8) & 0xff));
+ gain = cs_get_gain(tempctl);
+
+ if (tempctl != cs4218_control) {
+ cs4218_ctl_write(tempctl);
+ }
+ return gain;
+}
+
+static int CS_SetVolume(int volume)
+{
+ return cs_volume_setter(volume, CS_MUTE);
+}
+
+static void CS_Play(void)
+{
+ int i, count;
+ unsigned long flags;
+ volatile cbd_t *bdp;
+ volatile cpm8xx_t *cp;
+
+ /* Protect buffer */
+ spin_lock_irqsave(&cs4218_lock, flags);
+#if 0
+ if (awacs_beep_state) {
+ /* sound takes precedence over beeps */
+ out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
+ out_le32(&awacs->control,
+ (in_le32(&awacs->control) & ~0x1f00)
+ | (awacs_rate_index << 8));
+ out_le32(&awacs->byteswap, sound.hard.format != AFMT_S16_BE);
+ out_le32(&awacs_txdma->cmdptr, virt_to_bus(&(awacs_tx_cmds[(sq.front+sq.active) % sq.max_count])));
+
+ beep_playing = 0;
+ awacs_beep_state = 0;
+ }
+#endif
+ i = sq.front + sq.active;
+ if (i >= sq.max_count)
+ i -= sq.max_count;
+ while (sq.active < 2 && sq.active < sq.count) {
+ count = (sq.count == sq.active + 1)?sq.rear_size:sq.block_size;
+ if (count < sq.block_size && !sq.syncing)
+ /* last block not yet filled, and we're not syncing. */
+ break;
+
+ bdp = &tx_base[i];
+ bdp->cbd_datlen = count;
+
+ flush_dcache_range((ulong)sound_buffers[i],
+ (ulong)(sound_buffers[i] + count));
+
+ if (++i >= sq.max_count)
+ i = 0;
+
+ if (sq.active == 0) {
+ /* The SMC does not load its fifo until the first
+ * TDM frame pulse, so the transmit data gets shifted
+ * by one word. To compensate for this, we incorrectly
+ * transmit the first buffer and shorten it by one
+ * word. Subsequent buffers are then aligned properly.
+ */
+ bdp->cbd_datlen -= 2;
+
+ /* Start up the SMC Transmitter.
+ */
+ cp = cpmp;
+ cp->cp_smc[1].smc_smcmr |= SMCMR_TEN;
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2,
+ CPM_CR_RESTART_TX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+ }
+
+ /* Buffer is ready now.
+ */
+ bdp->cbd_sc |= BD_SC_READY;
+
+ ++sq.active;
+ }
+ spin_unlock_irqrestore(&cs4218_lock, flags);
+}
+
+
+static void CS_Record(void)
+{
+ unsigned long flags;
+ volatile smc_t *sp;
+
+ if (read_sq.active)
+ return;
+
+ /* Protect buffer */
+ spin_lock_irqsave(&cs4218_lock, flags);
+
+ /* This is all we have to do......Just start it up.
+ */
+ sp = &cpmp->cp_smc[1];
+ sp->smc_smcmr |= SMCMR_REN;
+
+ read_sq.active = 1;
+
+ spin_unlock_irqrestore(&cs4218_lock, flags);
+}
+
+
+static void
+cs4218_tdm_tx_intr(void *devid)
+{
+ int i = sq.front;
+ volatile cbd_t *bdp;
+
+ while (sq.active > 0) {
+ bdp = &tx_base[i];
+ if (bdp->cbd_sc & BD_SC_READY)
+ break; /* this frame is still going */
+ --sq.count;
+ --sq.active;
+ if (++i >= sq.max_count)
+ i = 0;
+ }
+ if (i != sq.front)
+ WAKE_UP(sq.action_queue);
+ sq.front = i;
+
+ CS_Play();
+
+ if (!sq.active)
+ WAKE_UP(sq.sync_queue);
+}
+
+
+static void
+cs4218_tdm_rx_intr(void *devid)
+{
+
+ /* We want to blow 'em off when shutting down.
+ */
+ if (read_sq.active == 0)
+ return;
+
+ /* Check multiple buffers in case we were held off from
+ * interrupt processing for a long time. Geeze, I really hope
+ * this doesn't happen.
+ */
+ while ((rx_base[read_sq.rear].cbd_sc & BD_SC_EMPTY) == 0) {
+
+ /* Invalidate the data cache range for this buffer.
+ */
+ invalidate_dcache_range(
+ (uint)(sound_read_buffers[read_sq.rear]),
+ (uint)(sound_read_buffers[read_sq.rear] + read_sq.block_size));
+
+ /* Make buffer available again and move on.
+ */
+ rx_base[read_sq.rear].cbd_sc |= BD_SC_EMPTY;
+ read_sq.rear++;
+
+ /* Wrap the buffer ring.
+ */
+ if (read_sq.rear >= read_sq.max_active)
+ read_sq.rear = 0;
+
+ /* If we have caught up to the front buffer, bump it.
+ * This will cause weird (but not fatal) results if the
+ * read loop is currently using this buffer. The user is
+ * behind in this case anyway, so weird things are going
+ * to happen.
+ */
+ if (read_sq.rear == read_sq.front) {
+ read_sq.front++;
+ if (read_sq.front >= read_sq.max_active)
+ read_sq.front = 0;
+ }
+ }
+
+ WAKE_UP(read_sq.action_queue);
+}
+
+static void cs_nosound(unsigned long xx)
+{
+ unsigned long flags;
+
+ /* not sure if this is needed, since hardware command is #if 0'd */
+ spin_lock_irqsave(&cs4218_lock, flags);
+ if (beep_playing) {
+#if 0
+ st_le16(&beep_dbdma_cmd->command, DBDMA_STOP);
+#endif
+ beep_playing = 0;
+ }
+ spin_unlock_irqrestore(&cs4218_lock, flags);
+}
+
+static struct timer_list beep_timer = TIMER_INITIALIZER(cs_nosound, 0, 0);
+};
+
+static void cs_mksound(unsigned int hz, unsigned int ticks)
+{
+ unsigned long flags;
+ int beep_speed = BEEP_SPEED;
+ int srate = cs4218_freqs[beep_speed];
+ int period, ncycles, nsamples;
+ int i, j, f;
+ short *p;
+ static int beep_hz_cache;
+ static int beep_nsamples_cache;
+ static int beep_volume_cache;
+
+ if (hz <= srate / BEEP_BUFLEN || hz > srate / 2) {
+#if 1
+ /* this is a hack for broken X server code */
+ hz = 750;
+ ticks = 12;
+#else
+ /* cancel beep currently playing */
+ awacs_nosound(0);
+ return;
+#endif
+ }
+ /* lock while modifying beep_timer */
+ spin_lock_irqsave(&cs4218_lock, flags);
+ del_timer(&beep_timer);
+ if (ticks) {
+ beep_timer.expires = jiffies + ticks;
+ add_timer(&beep_timer);
+ }
+ if (beep_playing || sq.active || beep_buf == NULL) {
+ spin_unlock_irqrestore(&cs4218_lock, flags);
+ return; /* too hard, sorry :-( */
+ }
+ beep_playing = 1;
+#if 0
+ st_le16(&beep_dbdma_cmd->command, OUTPUT_MORE + BR_ALWAYS);
+#endif
+ spin_unlock_irqrestore(&cs4218_lock, flags);
+
+ if (hz == beep_hz_cache && beep_volume == beep_volume_cache) {
+ nsamples = beep_nsamples_cache;
+ } else {
+ period = srate * 256 / hz; /* fixed point */
+ ncycles = BEEP_BUFLEN * 256 / period;
+ nsamples = (period * ncycles) >> 8;
+ f = ncycles * 65536 / nsamples;
+ j = 0;
+ p = beep_buf;
+ for (i = 0; i < nsamples; ++i, p += 2) {
+ p[0] = p[1] = beep_wform[j >> 8] * beep_volume;
+ j = (j + f) & 0xffff;
+ }
+ beep_hz_cache = hz;
+ beep_volume_cache = beep_volume;
+ beep_nsamples_cache = nsamples;
+ }
+
+#if 0
+ st_le16(&beep_dbdma_cmd->req_count, nsamples*4);
+ st_le16(&beep_dbdma_cmd->xfer_status, 0);
+ st_le32(&beep_dbdma_cmd->cmd_dep, virt_to_bus(beep_dbdma_cmd));
+ st_le32(&beep_dbdma_cmd->phy_addr, virt_to_bus(beep_buf));
+ awacs_beep_state = 1;
+
+ spin_lock_irqsave(&cs4218_lock, flags);
+ if (beep_playing) { /* i.e. haven't been terminated already */
+ out_le32(&awacs_txdma->control, (RUN|WAKE|FLUSH|PAUSE) << 16);
+ out_le32(&awacs->control,
+ (in_le32(&awacs->control) & ~0x1f00)
+ | (beep_speed << 8));
+ out_le32(&awacs->byteswap, 0);
+ out_le32(&awacs_txdma->cmdptr, virt_to_bus(beep_dbdma_cmd));
+ out_le32(&awacs_txdma->control, RUN | (RUN << 16));
+ }
+ spin_unlock_irqrestore(&cs4218_lock, flags);
+#endif
+}
+
+static MACHINE mach_cs4218 = {
+ .owner = THIS_MODULE,
+ .name = "HIOX CS4218",
+ .name2 = "Built-in Sound",
+ .dma_alloc = CS_Alloc,
+ .dma_free = CS_Free,
+ .irqinit = CS_IrqInit,
+#ifdef MODULE
+ .irqcleanup = CS_IrqCleanup,
+#endif /* MODULE */
+ .init = CS_Init,
+ .silence = CS_Silence,
+ .setFormat = CS_SetFormat,
+ .setVolume = CS_SetVolume,
+ .play = CS_Play
+};
+
+
+/*** Mid level stuff *********************************************************/
+
+
+static void sound_silence(void)
+{
+ /* update hardware settings one more */
+ (*sound.mach.init)();
+
+ (*sound.mach.silence)();
+}
+
+
+static void sound_init(void)
+{
+ (*sound.mach.init)();
+}
+
+
+static int sound_set_format(int format)
+{
+ return(*sound.mach.setFormat)(format);
+}
+
+
+static int sound_set_speed(int speed)
+{
+ if (speed < 0)
+ return(sound.soft.speed);
+
+ sound.soft.speed = speed;
+ (*sound.mach.init)();
+ if (sound.minDev == SND_DEV_DSP)
+ sound.dsp.speed = sound.soft.speed;
+
+ return(sound.soft.speed);
+}
+
+
+static int sound_set_stereo(int stereo)
+{
+ if (stereo < 0)
+ return(sound.soft.stereo);
+
+ stereo = !!stereo; /* should be 0 or 1 now */
+
+ sound.soft.stereo = stereo;
+ if (sound.minDev == SND_DEV_DSP)
+ sound.dsp.stereo = stereo;
+ (*sound.mach.init)();
+
+ return(stereo);
+}
+
+
+static int sound_set_volume(int volume)
+{
+ return(*sound.mach.setVolume)(volume);
+}
+
+static ssize_t sound_copy_translate(const u_char *userPtr,
+ size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ ssize_t (*ct_func)(const u_char *, size_t, u_char *, ssize_t *, ssize_t) = NULL;
+
+ switch (sound.soft.format) {
+ case AFMT_MU_LAW:
+ ct_func = sound.trans_write->ct_ulaw;
+ break;
+ case AFMT_A_LAW:
+ ct_func = sound.trans_write->ct_alaw;
+ break;
+ case AFMT_S8:
+ ct_func = sound.trans_write->ct_s8;
+ break;
+ case AFMT_U8:
+ ct_func = sound.trans_write->ct_u8;
+ break;
+ case AFMT_S16_BE:
+ ct_func = sound.trans_write->ct_s16be;
+ break;
+ case AFMT_U16_BE:
+ ct_func = sound.trans_write->ct_u16be;
+ break;
+ case AFMT_S16_LE:
+ ct_func = sound.trans_write->ct_s16le;
+ break;
+ case AFMT_U16_LE:
+ ct_func = sound.trans_write->ct_u16le;
+ break;
+ }
+ if (ct_func)
+ return ct_func(userPtr, userCount, frame, frameUsed, frameLeft);
+ else
+ return 0;
+}
+
+static ssize_t sound_copy_translate_read(const u_char *userPtr,
+ size_t userCount,
+ u_char frame[], ssize_t *frameUsed,
+ ssize_t frameLeft)
+{
+ ssize_t (*ct_func)(const u_char *, size_t, u_char *, ssize_t *, ssize_t) = NULL;
+
+ switch (sound.soft.format) {
+ case AFMT_MU_LAW:
+ ct_func = sound.trans_read->ct_ulaw;
+ break;
+ case AFMT_A_LAW:
+ ct_func = sound.trans_read->ct_alaw;
+ break;
+ case AFMT_S8:
+ ct_func = sound.trans_read->ct_s8;
+ break;
+ case AFMT_U8:
+ ct_func = sound.trans_read->ct_u8;
+ break;
+ case AFMT_S16_BE:
+ ct_func = sound.trans_read->ct_s16be;
+ break;
+ case AFMT_U16_BE:
+ ct_func = sound.trans_read->ct_u16be;
+ break;
+ case AFMT_S16_LE:
+ ct_func = sound.trans_read->ct_s16le;
+ break;
+ case AFMT_U16_LE:
+ ct_func = sound.trans_read->ct_u16le;
+ break;
+ }
+ if (ct_func)
+ return ct_func(userPtr, userCount, frame, frameUsed, frameLeft);
+ else
+ return 0;
+}
+
+
+/*
+ * /dev/mixer abstraction
+ */
+
+static int mixer_open(struct inode *inode, struct file *file)
+{
+ mixer.busy = 1;
+ return nonseekable_open(inode, file);
+}
+
+
+static int mixer_release(struct inode *inode, struct file *file)
+{
+ mixer.busy = 0;
+ return 0;
+}
+
+
+static int mixer_ioctl(struct inode *inode, struct file *file, u_int cmd,
+ u_long arg)
+{
+ int data;
+ uint tmpcs;
+
+ if (_SIOC_DIR(cmd) & _SIOC_WRITE)
+ mixer.modify_counter++;
+ if (cmd == OSS_GETVERSION)
+ return IOCTL_OUT(arg, SOUND_VERSION);
+ switch (cmd) {
+ case SOUND_MIXER_INFO: {
+ mixer_info info;
+ strlcpy(info.id, "CS4218_TDM", sizeof(info.id));
+ strlcpy(info.name, "CS4218_TDM", sizeof(info.name));
+ info.name[sizeof(info.name)-1] = 0;
+ info.modify_counter = mixer.modify_counter;
+ if (copy_to_user((int *)arg, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+ }
+ case SOUND_MIXER_READ_DEVMASK:
+ data = SOUND_MASK_VOLUME | SOUND_MASK_LINE
+ | SOUND_MASK_MIC | SOUND_MASK_RECLEV
+ | SOUND_MASK_ALTPCM;
+ return IOCTL_OUT(arg, data);
+ case SOUND_MIXER_READ_RECMASK:
+ data = SOUND_MASK_LINE | SOUND_MASK_MIC;
+ return IOCTL_OUT(arg, data);
+ case SOUND_MIXER_READ_RECSRC:
+ if (cs4218_control & CS_DO1)
+ data = SOUND_MASK_LINE;
+ else
+ data = SOUND_MASK_MIC;
+ return IOCTL_OUT(arg, data);
+ case SOUND_MIXER_WRITE_RECSRC:
+ IOCTL_IN(arg, data);
+ data &= (SOUND_MASK_LINE | SOUND_MASK_MIC);
+ if (data & SOUND_MASK_LINE)
+ tmpcs = cs4218_control |
+ (CS_ISL | CS_ISR | CS_DO1);
+ if (data & SOUND_MASK_MIC)
+ tmpcs = cs4218_control &
+ ~(CS_ISL | CS_ISR | CS_DO1);
+ if (tmpcs != cs4218_control)
+ cs4218_ctl_write(tmpcs);
+ return IOCTL_OUT(arg, data);
+ case SOUND_MIXER_READ_STEREODEVS:
+ data = SOUND_MASK_VOLUME | SOUND_MASK_RECLEV;
+ return IOCTL_OUT(arg, data);
+ case SOUND_MIXER_READ_CAPS:
+ return IOCTL_OUT(arg, 0);
+ case SOUND_MIXER_READ_VOLUME:
+ data = (cs4218_control & CS_MUTE)? 0:
+ cs_get_volume(cs4218_control);
+ return IOCTL_OUT(arg, data);
+ case SOUND_MIXER_WRITE_VOLUME:
+ IOCTL_IN(arg, data);
+ return IOCTL_OUT(arg, sound_set_volume(data));
+ case SOUND_MIXER_WRITE_ALTPCM: /* really bell volume */
+ IOCTL_IN(arg, data);
+ beep_volume = data & 0xff;
+ /* fall through */
+ case SOUND_MIXER_READ_ALTPCM:
+ return IOCTL_OUT(arg, beep_volume);
+ case SOUND_MIXER_WRITE_RECLEV:
+ IOCTL_IN(arg, data);
+ data = cs_set_gain(data);
+ return IOCTL_OUT(arg, data);
+ case SOUND_MIXER_READ_RECLEV:
+ data = cs_get_gain(cs4218_control);
+ return IOCTL_OUT(arg, data);
+ }
+
+ return -EINVAL;
+}
+
+
+static struct file_operations mixer_fops =
+{
+ .owner = THIS_MODULE,
+ .llseek = sound_lseek,
+ .ioctl = mixer_ioctl,
+ .open = mixer_open,
+ .release = mixer_release,
+};
+
+
+static void __init mixer_init(void)
+{
+ mixer_unit = register_sound_mixer(&mixer_fops, -1);
+ if (mixer_unit < 0)
+ return;
+
+ mixer.busy = 0;
+ sound.treble = 0;
+ sound.bass = 0;
+
+ /* Set Line input, no gain, no attenuation.
+ */
+ cs4218_control = CS_ISL | CS_ISR | CS_DO1;
+ cs4218_control |= CS_LGAIN_SET(0) | CS_RGAIN_SET(0);
+ cs4218_control |= CS_LATTEN_SET(0) | CS_RATTEN_SET(0);
+ cs4218_ctl_write(cs4218_control);
+}
+
+
+/*
+ * Sound queue stuff, the heart of the driver
+ */
+
+
+static int sq_allocate_buffers(void)
+{
+ int i;
+
+ if (sound_buffers)
+ return 0;
+ sound_buffers = kmalloc (numBufs * sizeof(char *), GFP_KERNEL);
+ if (!sound_buffers)
+ return -ENOMEM;
+ for (i = 0; i < numBufs; i++) {
+ sound_buffers[i] = sound.mach.dma_alloc (bufSize << 10, GFP_KERNEL);
+ if (!sound_buffers[i]) {
+ while (i--)
+ sound.mach.dma_free (sound_buffers[i], bufSize << 10);
+ kfree (sound_buffers);
+ sound_buffers = 0;
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+
+static void sq_release_buffers(void)
+{
+ int i;
+
+ if (sound_buffers) {
+ for (i = 0; i < numBufs; i++)
+ sound.mach.dma_free (sound_buffers[i], bufSize << 10);
+ kfree (sound_buffers);
+ sound_buffers = 0;
+ }
+}
+
+
+static int sq_allocate_read_buffers(void)
+{
+ int i;
+
+ if (sound_read_buffers)
+ return 0;
+ sound_read_buffers = kmalloc(numReadBufs * sizeof(char *), GFP_KERNEL);
+ if (!sound_read_buffers)
+ return -ENOMEM;
+ for (i = 0; i < numBufs; i++) {
+ sound_read_buffers[i] = sound.mach.dma_alloc (readbufSize<<10,
+ GFP_KERNEL);
+ if (!sound_read_buffers[i]) {
+ while (i--)
+ sound.mach.dma_free (sound_read_buffers[i],
+ readbufSize << 10);
+ kfree (sound_read_buffers);
+ sound_read_buffers = 0;
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+static void sq_release_read_buffers(void)
+{
+ int i;
+
+ if (sound_read_buffers) {
+ cpmp->cp_smc[1].smc_smcmr &= ~SMCMR_REN;
+ for (i = 0; i < numReadBufs; i++)
+ sound.mach.dma_free (sound_read_buffers[i],
+ bufSize << 10);
+ kfree (sound_read_buffers);
+ sound_read_buffers = 0;
+ }
+}
+
+
+static void sq_setup(int numBufs, int bufSize, char **write_buffers)
+{
+ int i;
+ volatile cbd_t *bdp;
+ volatile cpm8xx_t *cp;
+ volatile smc_t *sp;
+
+ /* Make sure the SMC transmit is shut down.
+ */
+ cp = cpmp;
+ sp = &cpmp->cp_smc[1];
+ sp->smc_smcmr &= ~SMCMR_TEN;
+
+ sq.max_count = numBufs;
+ sq.max_active = numBufs;
+ sq.block_size = bufSize;
+ sq.buffers = write_buffers;
+
+ sq.front = sq.count = 0;
+ sq.rear = -1;
+ sq.syncing = 0;
+ sq.active = 0;
+
+ bdp = tx_base;
+ for (i=0; i<numBufs; i++) {
+ bdp->cbd_bufaddr = virt_to_bus(write_buffers[i]);
+ bdp++;
+ }
+
+ /* This causes the SMC to sync up with the first buffer again.
+ */
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2, CPM_CR_INIT_TX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+}
+
+static void read_sq_setup(int numBufs, int bufSize, char **read_buffers)
+{
+ int i;
+ volatile cbd_t *bdp;
+ volatile cpm8xx_t *cp;
+ volatile smc_t *sp;
+
+ /* Make sure the SMC receive is shut down.
+ */
+ cp = cpmp;
+ sp = &cpmp->cp_smc[1];
+ sp->smc_smcmr &= ~SMCMR_REN;
+
+ read_sq.max_count = numBufs;
+ read_sq.max_active = numBufs;
+ read_sq.block_size = bufSize;
+ read_sq.buffers = read_buffers;
+
+ read_sq.front = read_sq.count = 0;
+ read_sq.rear = 0;
+ read_sq.rear_size = 0;
+ read_sq.syncing = 0;
+ read_sq.active = 0;
+
+ bdp = rx_base;
+ for (i=0; i<numReadBufs; i++) {
+ bdp->cbd_bufaddr = virt_to_bus(read_buffers[i]);
+ bdp->cbd_datlen = read_sq.block_size;
+ bdp++;
+ }
+
+ /* This causes the SMC to sync up with the first buffer again.
+ */
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2, CPM_CR_INIT_RX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+}
+
+
+static void sq_play(void)
+{
+ (*sound.mach.play)();
+}
+
+
+/* ++TeSche: radically changed this one too */
+
+static ssize_t sq_write(struct file *file, const char *src, size_t uLeft,
+ loff_t *ppos)
+{
+ ssize_t uWritten = 0;
+ u_char *dest;
+ ssize_t uUsed, bUsed, bLeft;
+
+ /* ++TeSche: Is something like this necessary?
+ * Hey, that's an honest question! Or does any other part of the
+ * filesystem already checks this situation? I really don't know.
+ */
+ if (uLeft == 0)
+ return 0;
+
+ /* The interrupt doesn't start to play the last, incomplete frame.
+ * Thus we can append to it without disabling the interrupts! (Note
+ * also that sq.rear isn't affected by the interrupt.)
+ */
+
+ if (sq.count > 0 && (bLeft = sq.block_size-sq.rear_size) > 0) {
+ dest = sq_block_address(sq.rear);
+ bUsed = sq.rear_size;
+ uUsed = sound_copy_translate(src, uLeft, dest, &bUsed, bLeft);
+ if (uUsed <= 0)
+ return uUsed;
+ src += uUsed;
+ uWritten += uUsed;
+ uLeft -= uUsed;
+ sq.rear_size = bUsed;
+ }
+
+ do {
+ while (sq.count == sq.max_active) {
+ sq_play();
+ if (NON_BLOCKING(sq.open_mode))
+ return uWritten > 0 ? uWritten : -EAGAIN;
+ SLEEP(sq.action_queue);
+ if (SIGNAL_RECEIVED)
+ return uWritten > 0 ? uWritten : -EINTR;
+ }
+
+ /* Here, we can avoid disabling the interrupt by first
+ * copying and translating the data, and then updating
+ * the sq variables. Until this is done, the interrupt
+ * won't see the new frame and we can work on it
+ * undisturbed.
+ */
+
+ dest = sq_block_address((sq.rear+1) % sq.max_count);
+ bUsed = 0;
+ bLeft = sq.block_size;
+ uUsed = sound_copy_translate(src, uLeft, dest, &bUsed, bLeft);
+ if (uUsed <= 0)
+ break;
+ src += uUsed;
+ uWritten += uUsed;
+ uLeft -= uUsed;
+ if (bUsed) {
+ sq.rear = (sq.rear+1) % sq.max_count;
+ sq.rear_size = bUsed;
+ sq.count++;
+ }
+ } while (bUsed); /* uUsed may have been 0 */
+
+ sq_play();
+
+ return uUsed < 0? uUsed: uWritten;
+}
+
+
+/***********/
+
+/* Here is how the values are used for reading.
+ * The value 'active' simply indicates the DMA is running. This is
+ * done so the driver semantics are DMA starts when the first read is
+ * posted. The value 'front' indicates the buffer we should next
+ * send to the user. The value 'rear' indicates the buffer the DMA is
+ * currently filling. When 'front' == 'rear' the buffer "ring" is
+ * empty (we always have an empty available). The 'rear_size' is used
+ * to track partial offsets into the current buffer. Right now, I just keep
+ * The DMA running. If the reader can't keep up, the interrupt tosses
+ * the oldest buffer. We could also shut down the DMA in this case.
+ */
+static ssize_t sq_read(struct file *file, char *dst, size_t uLeft,
+ loff_t *ppos)
+{
+
+ ssize_t uRead, bLeft, bUsed, uUsed;
+
+ if (uLeft == 0)
+ return 0;
+
+ if (!read_sq.active)
+ CS_Record(); /* Kick off the record process. */
+
+ uRead = 0;
+
+ /* Move what the user requests, depending upon other options.
+ */
+ while (uLeft > 0) {
+
+ /* When front == rear, the DMA is not done yet.
+ */
+ while (read_sq.front == read_sq.rear) {
+ if (NON_BLOCKING(read_sq.open_mode)) {
+ return uRead > 0 ? uRead : -EAGAIN;
+ }
+ SLEEP(read_sq.action_queue);
+ if (SIGNAL_RECEIVED)
+ return uRead > 0 ? uRead : -EINTR;
+ }
+
+ /* The amount we move is either what is left in the
+ * current buffer or what the user wants.
+ */
+ bLeft = read_sq.block_size - read_sq.rear_size;
+ bUsed = read_sq.rear_size;
+ uUsed = sound_copy_translate_read(dst, uLeft,
+ read_sq.buffers[read_sq.front], &bUsed, bLeft);
+ if (uUsed <= 0)
+ return uUsed;
+ dst += uUsed;
+ uRead += uUsed;
+ uLeft -= uUsed;
+ read_sq.rear_size += bUsed;
+ if (read_sq.rear_size >= read_sq.block_size) {
+ read_sq.rear_size = 0;
+ read_sq.front++;
+ if (read_sq.front >= read_sq.max_active)
+ read_sq.front = 0;
+ }
+ }
+ return uRead;
+}
+
+static int sq_open(struct inode *inode, struct file *file)
+{
+ int rc = 0;
+
+ if (file->f_mode & FMODE_WRITE) {
+ if (sq.busy) {
+ rc = -EBUSY;
+ if (NON_BLOCKING(file->f_flags))
+ goto err_out;
+ rc = -EINTR;
+ while (sq.busy) {
+ SLEEP(sq.open_queue);
+ if (SIGNAL_RECEIVED)
+ goto err_out;
+ }
+ }
+ sq.busy = 1; /* Let's play spot-the-race-condition */
+
+ if (sq_allocate_buffers()) goto err_out_nobusy;
+
+ sq_setup(numBufs, bufSize<<10,sound_buffers);
+ sq.open_mode = file->f_mode;
+ }
+
+
+ if (file->f_mode & FMODE_READ) {
+ if (read_sq.busy) {
+ rc = -EBUSY;
+ if (NON_BLOCKING(file->f_flags))
+ goto err_out;
+ rc = -EINTR;
+ while (read_sq.busy) {
+ SLEEP(read_sq.open_queue);
+ if (SIGNAL_RECEIVED)
+ goto err_out;
+ }
+ rc = 0;
+ }
+ read_sq.busy = 1;
+ if (sq_allocate_read_buffers()) goto err_out_nobusy;
+
+ read_sq_setup(numReadBufs,readbufSize<<10, sound_read_buffers);
+ read_sq.open_mode = file->f_mode;
+ }
+
+ /* Start up the 4218 by:
+ * Reset.
+ * Enable, unreset.
+ */
+ *((volatile uint *)HIOX_CSR4_ADDR) &= ~HIOX_CSR4_RSTAUDIO;
+ eieio();
+ *((volatile uint *)HIOX_CSR4_ADDR) |= HIOX_CSR4_ENAUDIO;
+ mdelay(50);
+ *((volatile uint *)HIOX_CSR4_ADDR) |= HIOX_CSR4_RSTAUDIO;
+
+ /* We need to send the current control word in case someone
+ * opened /dev/mixer and changed things while we were shut
+ * down. Chances are good the initialization that follows
+ * would have done this, but it is still possible it wouldn't.
+ */
+ cs4218_ctl_write(cs4218_control);
+
+ sound.minDev = iminor(inode) & 0x0f;
+ sound.soft = sound.dsp;
+ sound.hard = sound.dsp;
+ sound_init();
+ if ((iminor(inode) & 0x0f) == SND_DEV_AUDIO) {
+ sound_set_speed(8000);
+ sound_set_stereo(0);
+ sound_set_format(AFMT_MU_LAW);
+ }
+
+ return nonseekable_open(inode, file);
+
+err_out_nobusy:
+ if (file->f_mode & FMODE_WRITE) {
+ sq.busy = 0;
+ WAKE_UP(sq.open_queue);
+ }
+ if (file->f_mode & FMODE_READ) {
+ read_sq.busy = 0;
+ WAKE_UP(read_sq.open_queue);
+ }
+err_out:
+ return rc;
+}
+
+
+static void sq_reset(void)
+{
+ sound_silence();
+ sq.active = 0;
+ sq.count = 0;
+ sq.front = (sq.rear+1) % sq.max_count;
+#if 0
+ init_tdm_buffers();
+#endif
+}
+
+
+static int sq_fsync(struct file *filp, struct dentry *dentry)
+{
+ int rc = 0;
+
+ sq.syncing = 1;
+ sq_play(); /* there may be an incomplete frame waiting */
+
+ while (sq.active) {
+ SLEEP(sq.sync_queue);
+ if (SIGNAL_RECEIVED) {
+ /* While waiting for audio output to drain, an
+ * interrupt occurred. Stop audio output immediately
+ * and clear the queue. */
+ sq_reset();
+ rc = -EINTR;
+ break;
+ }
+ }
+
+ sq.syncing = 0;
+ return rc;
+}
+
+static int sq_release(struct inode *inode, struct file *file)
+{
+ int rc = 0;
+
+ if (sq.busy)
+ rc = sq_fsync(file, file->f_dentry);
+ sound.soft = sound.dsp;
+ sound.hard = sound.dsp;
+ sound_silence();
+
+ sq_release_read_buffers();
+ sq_release_buffers();
+
+ if (file->f_mode & FMODE_READ) {
+ read_sq.busy = 0;
+ WAKE_UP(read_sq.open_queue);
+ }
+
+ if (file->f_mode & FMODE_WRITE) {
+ sq.busy = 0;
+ WAKE_UP(sq.open_queue);
+ }
+
+ /* Shut down the SMC.
+ */
+ cpmp->cp_smc[1].smc_smcmr &= ~(SMCMR_TEN | SMCMR_REN);
+
+ /* Shut down the codec.
+ */
+ *((volatile uint *)HIOX_CSR4_ADDR) |= HIOX_CSR4_RSTAUDIO;
+ eieio();
+ *((volatile uint *)HIOX_CSR4_ADDR) &= ~HIOX_CSR4_ENAUDIO;
+
+ /* Wake up a process waiting for the queue being released.
+ * Note: There may be several processes waiting for a call
+ * to open() returning. */
+
+ return rc;
+}
+
+
+static int sq_ioctl(struct inode *inode, struct file *file, u_int cmd,
+ u_long arg)
+{
+ u_long fmt;
+ int data;
+#if 0
+ int size, nbufs;
+#else
+ int size;
+#endif
+
+ switch (cmd) {
+ case SNDCTL_DSP_RESET:
+ sq_reset();
+ return 0;
+ case SNDCTL_DSP_POST:
+ case SNDCTL_DSP_SYNC:
+ return sq_fsync(file, file->f_dentry);
+
+ /* ++TeSche: before changing any of these it's
+ * probably wise to wait until sound playing has
+ * settled down. */
+ case SNDCTL_DSP_SPEED:
+ sq_fsync(file, file->f_dentry);
+ IOCTL_IN(arg, data);
+ return IOCTL_OUT(arg, sound_set_speed(data));
+ case SNDCTL_DSP_STEREO:
+ sq_fsync(file, file->f_dentry);
+ IOCTL_IN(arg, data);
+ return IOCTL_OUT(arg, sound_set_stereo(data));
+ case SOUND_PCM_WRITE_CHANNELS:
+ sq_fsync(file, file->f_dentry);
+ IOCTL_IN(arg, data);
+ return IOCTL_OUT(arg, sound_set_stereo(data-1)+1);
+ case SNDCTL_DSP_SETFMT:
+ sq_fsync(file, file->f_dentry);
+ IOCTL_IN(arg, data);
+ return IOCTL_OUT(arg, sound_set_format(data));
+ case SNDCTL_DSP_GETFMTS:
+ fmt = 0;
+ if (sound.trans_write) {
+ if (sound.trans_write->ct_ulaw)
+ fmt |= AFMT_MU_LAW;
+ if (sound.trans_write->ct_alaw)
+ fmt |= AFMT_A_LAW;
+ if (sound.trans_write->ct_s8)
+ fmt |= AFMT_S8;
+ if (sound.trans_write->ct_u8)
+ fmt |= AFMT_U8;
+ if (sound.trans_write->ct_s16be)
+ fmt |= AFMT_S16_BE;
+ if (sound.trans_write->ct_u16be)
+ fmt |= AFMT_U16_BE;
+ if (sound.trans_write->ct_s16le)
+ fmt |= AFMT_S16_LE;
+ if (sound.trans_write->ct_u16le)
+ fmt |= AFMT_U16_LE;
+ }
+ return IOCTL_OUT(arg, fmt);
+ case SNDCTL_DSP_GETBLKSIZE:
+ size = sq.block_size
+ * sound.soft.size * (sound.soft.stereo + 1)
+ / (sound.hard.size * (sound.hard.stereo + 1));
+ return IOCTL_OUT(arg, size);
+ case SNDCTL_DSP_SUBDIVIDE:
+ break;
+#if 0 /* Sorry can't do this at the moment. The CPM allocated buffers
+ * long ago that can't be changed.
+ */
+ case SNDCTL_DSP_SETFRAGMENT:
+ if (sq.count || sq.active || sq.syncing)
+ return -EINVAL;
+ IOCTL_IN(arg, size);
+ nbufs = size >> 16;
+ if (nbufs < 2 || nbufs > numBufs)
+ nbufs = numBufs;
+ size &= 0xffff;
+ if (size >= 8 && size <= 30) {
+ size = 1 << size;
+ size *= sound.hard.size * (sound.hard.stereo + 1);
+ size /= sound.soft.size * (sound.soft.stereo + 1);
+ if (size > (bufSize << 10))
+ size = bufSize << 10;
+ } else
+ size = bufSize << 10;
+ sq_setup(numBufs, size, sound_buffers);
+ sq.max_active = nbufs;
+ return 0;
+#endif
+
+ default:
+ return mixer_ioctl(inode, file, cmd, arg);
+ }
+ return -EINVAL;
+}
+
+
+
+static struct file_operations sq_fops =
+{
+ .owner = THIS_MODULE,
+ .llseek = sound_lseek,
+ .read = sq_read, /* sq_read */
+ .write = sq_write,
+ .ioctl = sq_ioctl,
+ .open = sq_open,
+ .release = sq_release,
+};
+
+
+static void __init sq_init(void)
+{
+ sq_unit = register_sound_dsp(&sq_fops, -1);
+ if (sq_unit < 0)
+ return;
+
+ init_waitqueue_head(&sq.action_queue);
+ init_waitqueue_head(&sq.open_queue);
+ init_waitqueue_head(&sq.sync_queue);
+ init_waitqueue_head(&read_sq.action_queue);
+ init_waitqueue_head(&read_sq.open_queue);
+ init_waitqueue_head(&read_sq.sync_queue);
+
+ sq.busy = 0;
+ read_sq.busy = 0;
+
+ /* whatever you like as startup mode for /dev/dsp,
+ * (/dev/audio hasn't got a startup mode). note that
+ * once changed a new open() will *not* restore these!
+ */
+ sound.dsp.format = AFMT_S16_BE;
+ sound.dsp.stereo = 1;
+ sound.dsp.size = 16;
+
+ /* set minimum rate possible without expanding */
+ sound.dsp.speed = 8000;
+
+ /* before the first open to /dev/dsp this wouldn't be set */
+ sound.soft = sound.dsp;
+ sound.hard = sound.dsp;
+
+ sound_silence();
+}
+
+/*
+ * /dev/sndstat
+ */
+
+
+/* state.buf should not overflow! */
+
+static int state_open(struct inode *inode, struct file *file)
+{
+ char *buffer = state.buf, *mach = "", cs4218_buf[50];
+ int len = 0;
+
+ if (state.busy)
+ return -EBUSY;
+
+ state.ptr = 0;
+ state.busy = 1;
+
+ sprintf(cs4218_buf, "Crystal CS4218 on TDM, ");
+ mach = cs4218_buf;
+
+ len += sprintf(buffer+len, "%sDMA sound driver:\n", mach);
+
+ len += sprintf(buffer+len, "\tsound.format = 0x%x", sound.soft.format);
+ switch (sound.soft.format) {
+ case AFMT_MU_LAW:
+ len += sprintf(buffer+len, " (mu-law)");
+ break;
+ case AFMT_A_LAW:
+ len += sprintf(buffer+len, " (A-law)");
+ break;
+ case AFMT_U8:
+ len += sprintf(buffer+len, " (unsigned 8 bit)");
+ break;
+ case AFMT_S8:
+ len += sprintf(buffer+len, " (signed 8 bit)");
+ break;
+ case AFMT_S16_BE:
+ len += sprintf(buffer+len, " (signed 16 bit big)");
+ break;
+ case AFMT_U16_BE:
+ len += sprintf(buffer+len, " (unsigned 16 bit big)");
+ break;
+ case AFMT_S16_LE:
+ len += sprintf(buffer+len, " (signed 16 bit little)");
+ break;
+ case AFMT_U16_LE:
+ len += sprintf(buffer+len, " (unsigned 16 bit little)");
+ break;
+ }
+ len += sprintf(buffer+len, "\n");
+ len += sprintf(buffer+len, "\tsound.speed = %dHz (phys. %dHz)\n",
+ sound.soft.speed, sound.hard.speed);
+ len += sprintf(buffer+len, "\tsound.stereo = 0x%x (%s)\n",
+ sound.soft.stereo, sound.soft.stereo ? "stereo" : "mono");
+ len += sprintf(buffer+len, "\tsq.block_size = %d sq.max_count = %d"
+ " sq.max_active = %d\n",
+ sq.block_size, sq.max_count, sq.max_active);
+ len += sprintf(buffer+len, "\tsq.count = %d sq.rear_size = %d\n", sq.count,
+ sq.rear_size);
+ len += sprintf(buffer+len, "\tsq.active = %d sq.syncing = %d\n",
+ sq.active, sq.syncing);
+ state.len = len;
+ return nonseekable_open(inode, file);
+}
+
+
+static int state_release(struct inode *inode, struct file *file)
+{
+ state.busy = 0;
+ return 0;
+}
+
+
+static ssize_t state_read(struct file *file, char *buf, size_t count,
+ loff_t *ppos)
+{
+ int n = state.len - state.ptr;
+ if (n > count)
+ n = count;
+ if (n <= 0)
+ return 0;
+ if (copy_to_user(buf, &state.buf[state.ptr], n))
+ return -EFAULT;
+ state.ptr += n;
+ return n;
+}
+
+
+static struct file_operations state_fops =
+{
+ .owner = THIS_MODULE,
+ .llseek = sound_lseek,
+ .read = state_read,
+ .open = state_open,
+ .release = state_release,
+};
+
+
+static void __init state_init(void)
+{
+ state_unit = register_sound_special(&state_fops, SND_DEV_STATUS);
+ if (state_unit < 0)
+ return;
+ state.busy = 0;
+}
+
+
+/*** Common stuff ********************************************************/
+
+static long long sound_lseek(struct file *file, long long offset, int orig)
+{
+ return -ESPIPE;
+}
+
+
+/*** Config & Setup **********************************************************/
+
+
+int __init tdm8xx_sound_init(void)
+{
+ int i, has_sound;
+ uint dp_offset;
+ volatile uint *sirp;
+ volatile cbd_t *bdp;
+ volatile cpm8xx_t *cp;
+ volatile smc_t *sp;
+ volatile smc_uart_t *up;
+ volatile immap_t *immap;
+
+ has_sound = 0;
+
+ /* Program the SI/TSA to use TDMa, connected to SMC2, for 4 bytes.
+ */
+ cp = cpmp; /* Get pointer to Communication Processor */
+ immap = (immap_t *)IMAP_ADDR; /* and to internal registers */
+
+ /* Set all TDMa control bits to zero. This enables most features
+ * we want.
+ */
+ cp->cp_simode &= ~0x00000fff;
+
+ /* Enable common receive/transmit clock pins, use IDL format.
+ * Sync on falling edge, transmit rising clock, receive falling
+ * clock, delay 1 bit on both Tx and Rx. Common Tx/Rx clocks and
+ * sync.
+ * Connect SMC2 to TSA.
+ */
+ cp->cp_simode |= 0x80000141;
+
+ /* Configure port A pins for TDMa operation.
+ * The RPX-Lite (MPC850/823) loses SMC2 when TDM is used.
+ */
+ immap->im_ioport.iop_papar |= 0x01c0; /* Enable TDMa functions */
+ immap->im_ioport.iop_padir |= 0x00c0; /* Enable TDMa Tx/Rx */
+ immap->im_ioport.iop_padir &= ~0x0100; /* Enable L1RCLKa */
+
+ immap->im_ioport.iop_pcpar |= 0x0800; /* Enable L1RSYNCa */
+ immap->im_ioport.iop_pcdir &= ~0x0800;
+
+ /* Initialize the SI TDM routing table. We use TDMa only.
+ * The receive table and transmit table each have only one
+ * entry, to capture/send four bytes after each frame pulse.
+ * The 16-bit ram entry is 0000 0001 1000 1111. (SMC2)
+ */
+ cp->cp_sigmr = 0;
+ sirp = (uint *)cp->cp_siram;
+
+ *sirp = 0x018f0000; /* Receive entry */
+ sirp += 64;
+ *sirp = 0x018f0000; /* Tramsmit entry */
+
+ /* Enable single TDMa routing.
+ */
+ cp->cp_sigmr = 0x04;
+
+ /* Initialize the SMC for transparent operation.
+ */
+ sp = &cpmp->cp_smc[1];
+ up = (smc_uart_t *)&cp->cp_dparam[PROFF_SMC2];
+
+ /* We need to allocate a transmit and receive buffer
+ * descriptors from dual port ram.
+ */
+ dp_addr = cpm_dpalloc(sizeof(cbd_t) * numReadBufs, 8);
+
+ /* Set the physical address of the host memory
+ * buffers in the buffer descriptors, and the
+ * virtual address for us to work with.
+ */
+ bdp = (cbd_t *)&cp->cp_dpmem[dp_addr];
+ up->smc_rbase = dp_offset;
+ rx_cur = rx_base = (cbd_t *)bdp;
+
+ for (i=0; i<(numReadBufs-1); i++) {
+ bdp->cbd_bufaddr = 0;
+ bdp->cbd_datlen = 0;
+ bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
+ bdp++;
+ }
+ bdp->cbd_bufaddr = 0;
+ bdp->cbd_datlen = 0;
+ bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
+
+ /* Now, do the same for the transmit buffers.
+ */
+ dp_offset = cpm_dpalloc(sizeof(cbd_t) * numBufs, 8);
+
+ bdp = (cbd_t *)&cp->cp_dpmem[dp_addr];
+ up->smc_tbase = dp_offset;
+ tx_cur = tx_base = (cbd_t *)bdp;
+
+ for (i=0; i<(numBufs-1); i++) {
+ bdp->cbd_bufaddr = 0;
+ bdp->cbd_datlen = 0;
+ bdp->cbd_sc = BD_SC_INTRPT;
+ bdp++;
+ }
+ bdp->cbd_bufaddr = 0;
+ bdp->cbd_datlen = 0;
+ bdp->cbd_sc = (BD_SC_WRAP | BD_SC_INTRPT);
+
+ /* Set transparent SMC mode.
+ * A few things are specific to our application. The codec interface
+ * is MSB first, hence the REVD selection. The CD/CTS pulse are
+ * used by the TSA to indicate the frame start to the SMC.
+ */
+ up->smc_rfcr = SCC_EB;
+ up->smc_tfcr = SCC_EB;
+ up->smc_mrblr = readbufSize * 1024;
+
+ /* Set 16-bit reversed data, transparent mode.
+ */
+ sp->smc_smcmr = smcr_mk_clen(15) |
+ SMCMR_SM_TRANS | SMCMR_REVD | SMCMR_BS;
+
+ /* Enable and clear events.
+ * Because of FIFO delays, all we need is the receive interrupt
+ * and we can process both the current receive and current
+ * transmit interrupt within a few microseconds of the transmit.
+ */
+ sp->smc_smce = 0xff;
+ sp->smc_smcm = SMCM_TXE | SMCM_TX | SMCM_RX;
+
+ /* Send the CPM an initialize command.
+ */
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2,
+ CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+
+ sound.mach = mach_cs4218;
+ has_sound = 1;
+
+ /* Initialize beep stuff */
+ orig_mksound = kd_mksound;
+ kd_mksound = cs_mksound;
+ beep_buf = (short *) kmalloc(BEEP_BUFLEN * 4, GFP_KERNEL);
+ if (beep_buf == NULL)
+ printk(KERN_WARNING "dmasound: no memory for "
+ "beep buffer\n");
+
+ if (!has_sound)
+ return -ENODEV;
+
+ /* Initialize the software SPI.
+ */
+ sw_spi_init();
+
+ /* Set up sound queue, /dev/audio and /dev/dsp. */
+
+ /* Set default settings. */
+ sq_init();
+
+ /* Set up /dev/sndstat. */
+ state_init();
+
+ /* Set up /dev/mixer. */
+ mixer_init();
+
+ if (!sound.mach.irqinit()) {
+ printk(KERN_ERR "DMA sound driver: Interrupt initialization failed\n");
+ return -ENODEV;
+ }
+#ifdef MODULE
+ irq_installed = 1;
+#endif
+
+ printk(KERN_INFO "DMA sound driver installed, using %d buffers of %dk.\n",
+ numBufs, bufSize);
+
+ return 0;
+}
+
+/* Due to FIFOs and bit delays, the transmit interrupt occurs a few
+ * microseconds ahead of the receive interrupt.
+ * When we get an interrupt, we service the transmit first, then
+ * check for a receive to prevent the overhead of returning through
+ * the interrupt handler only to get back here right away during
+ * full duplex operation.
+ */
+static void
+cs4218_intr(void *dev_id, struct pt_regs *regs)
+{
+ volatile smc_t *sp;
+ volatile cpm8xx_t *cp;
+
+ sp = &cpmp->cp_smc[1];
+
+ if (sp->smc_smce & SCCM_TX) {
+ sp->smc_smce = SCCM_TX;
+ cs4218_tdm_tx_intr((void *)sp);
+ }
+
+ if (sp->smc_smce & SCCM_RX) {
+ sp->smc_smce = SCCM_RX;
+ cs4218_tdm_rx_intr((void *)sp);
+ }
+
+ if (sp->smc_smce & SCCM_TXE) {
+ /* Transmit underrun. This happens with the application
+ * didn't keep up sending buffers. We tell the SMC to
+ * restart, which will cause it to poll the current (next)
+ * BD. If the user supplied data since this occurred,
+ * we just start running again. If they didn't, the SMC
+ * will poll the descriptor until data is placed there.
+ */
+ sp->smc_smce = SCCM_TXE;
+ cp = cpmp; /* Get pointer to Communication Processor */
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2,
+ CPM_CR_RESTART_TX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+ }
+}
+
+
+#define MAXARGS 8 /* Should be sufficient for now */
+
+void __init dmasound_setup(char *str, int *ints)
+{
+ /* check the bootstrap parameter for "dmasound=" */
+
+ switch (ints[0]) {
+ case 3:
+ if ((ints[3] < 0) || (ints[3] > MAX_CATCH_RADIUS))
+ printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius);
+ else
+ catchRadius = ints[3];
+ /* fall through */
+ case 2:
+ if (ints[1] < MIN_BUFFERS)
+ printk("dmasound_setup: invalid number of buffers, using default = %d\n", numBufs);
+ else
+ numBufs = ints[1];
+ if (ints[2] < MIN_BUFSIZE || ints[2] > MAX_BUFSIZE)
+ printk("dmasound_setup: invalid buffer size, using default = %d\n", bufSize);
+ else
+ bufSize = ints[2];
+ break;
+ case 0:
+ break;
+ default:
+ printk("dmasound_setup: invalid number of arguments\n");
+ }
+}
+
+/* Software SPI functions.
+ * These are on Port B.
+ */
+#define PB_SPICLK ((uint)0x00000002)
+#define PB_SPIMOSI ((uint)0x00000004)
+#define PB_SPIMISO ((uint)0x00000008)
+
+static
+void sw_spi_init(void)
+{
+ volatile cpm8xx_t *cp;
+ volatile uint *hcsr4;
+
+ hcsr4 = (volatile uint *)HIOX_CSR4_ADDR;
+ cp = cpmp; /* Get pointer to Communication Processor */
+
+ *hcsr4 &= ~HIOX_CSR4_AUDSPISEL; /* Disable SPI select */
+
+ /* Make these Port B signals general purpose I/O.
+ * First, make sure the clock is low.
+ */
+ cp->cp_pbdat &= ~PB_SPICLK;
+ cp->cp_pbpar &= ~(PB_SPICLK | PB_SPIMOSI | PB_SPIMISO);
+
+ /* Clock and Master Output are outputs.
+ */
+ cp->cp_pbdir |= (PB_SPICLK | PB_SPIMOSI);
+
+ /* Master Input.
+ */
+ cp->cp_pbdir &= ~PB_SPIMISO;
+
+}
+
+/* Write the CS4218 control word out the SPI port. While the
+ * the control word is going out, the status word is arriving.
+ */
+static
+uint cs4218_ctl_write(uint ctlreg)
+{
+ uint status;
+
+ sw_spi_io((u_char *)&ctlreg, (u_char *)&status, 4);
+
+ /* Shadow the control register.....I guess we could do
+ * the same for the status, but for now we just return it
+ * and let the caller decide.
+ */
+ cs4218_control = ctlreg;
+ return status;
+}
+
+static
+void sw_spi_io(u_char *obuf, u_char *ibuf, uint bcnt)
+{
+ int bits, i;
+ u_char outbyte, inbyte;
+ volatile cpm8xx_t *cp;
+ volatile uint *hcsr4;
+
+ hcsr4 = (volatile uint *)HIOX_CSR4_ADDR;
+ cp = cpmp; /* Get pointer to Communication Processor */
+
+ /* The timing on the bus is pretty slow. Code inefficiency
+ * and eieio() is our friend here :-).
+ */
+ cp->cp_pbdat &= ~PB_SPICLK;
+ *hcsr4 |= HIOX_CSR4_AUDSPISEL; /* Enable SPI select */
+ eieio();
+
+ /* Clock in/out the bytes. Data is valid on the falling edge
+ * of the clock. Data is MSB first.
+ */
+ for (i=0; i<bcnt; i++) {
+ outbyte = *obuf++;
+ inbyte = 0;
+ for (bits=0; bits<8; bits++) {
+ eieio();
+ cp->cp_pbdat |= PB_SPICLK;
+ eieio();
+ if (outbyte & 0x80)
+ cp->cp_pbdat |= PB_SPIMOSI;
+ else
+ cp->cp_pbdat &= ~PB_SPIMOSI;
+ eieio();
+ cp->cp_pbdat &= ~PB_SPICLK;
+ eieio();
+ outbyte <<= 1;
+ inbyte <<= 1;
+ if (cp->cp_pbdat & PB_SPIMISO)
+ inbyte |= 1;
+ }
+ *ibuf++ = inbyte;
+ }
+
+ *hcsr4 &= ~HIOX_CSR4_AUDSPISEL; /* Disable SPI select */
+ eieio();
+}
+
+void cleanup_module(void)
+{
+ if (irq_installed) {
+ sound_silence();
+#ifdef MODULE
+ sound.mach.irqcleanup();
+#endif
+ }
+
+ sq_release_read_buffers();
+ sq_release_buffers();
+
+ if (mixer_unit >= 0)
+ unregister_sound_mixer(mixer_unit);
+ if (state_unit >= 0)
+ unregister_sound_special(state_unit);
+ if (sq_unit >= 0)
+ unregister_sound_dsp(sq_unit);
+}
+
+module_init(tdm8xx_sound_init);
+module_exit(cleanup_module);
+
diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c
new file mode 100644
index 000000000000..4ea7158e5062
--- /dev/null
+++ b/arch/ppc/8xx_io/enet.c
@@ -0,0 +1,971 @@
+/*
+ * Ethernet driver for Motorola MPC8xx.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * I copied the basic skeleton from the lance driver, because I did not
+ * know how to write the Linux driver, but I did know how the LANCE worked.
+ *
+ * This version of the driver is somewhat selectable for the different
+ * processor/board combinations. It works for the boards I know about
+ * now, and should be easily modified to include others. Some of the
+ * configuration information is contained in <asm/commproc.h> and the
+ * remainder is here.
+ *
+ * Buffer descriptors are kept in the CPM dual port RAM, and the frame
+ * buffers are in the host memory.
+ *
+ * Right now, I am very watseful with the buffers. I allocate memory
+ * pages and then divide them into 2K frame buffers. This way I know I
+ * have buffers large enough to hold one frame within one buffer descriptor.
+ * Once I get this working, I will use 64 or 128 byte CPM buffers, which
+ * will be much more memory efficient and will easily handle lots of
+ * small packets.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+
+#include <asm/8xx_immap.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/uaccess.h>
+#include <asm/commproc.h>
+
+/*
+ * Theory of Operation
+ *
+ * The MPC8xx CPM performs the Ethernet processing on SCC1. It can use
+ * an aribtrary number of buffers on byte boundaries, but must have at
+ * least two receive buffers to prevent constant overrun conditions.
+ *
+ * The buffer descriptors are allocated from the CPM dual port memory
+ * with the data buffers allocated from host memory, just like all other
+ * serial communication protocols. The host memory buffers are allocated
+ * from the free page pool, and then divided into smaller receive and
+ * transmit buffers. The size of the buffers should be a power of two,
+ * since that nicely divides the page. This creates a ring buffer
+ * structure similar to the LANCE and other controllers.
+ *
+ * Like the LANCE driver:
+ * The driver runs as two independent, single-threaded flows of control. One
+ * is the send-packet routine, which enforces single-threaded use by the
+ * cep->tx_busy flag. The other thread is the interrupt handler, which is
+ * single threaded by the hardware and other software.
+ *
+ * The send packet thread has partial control over the Tx ring and the
+ * 'cep->tx_busy' flag. It sets the tx_busy flag whenever it's queuing a Tx
+ * packet. If the next queue slot is empty, it clears the tx_busy flag when
+ * finished otherwise it sets the 'lp->tx_full' flag.
+ *
+ * The MBX has a control register external to the MPC8xx that has some
+ * control of the Ethernet interface. Information is in the manual for
+ * your board.
+ *
+ * The RPX boards have an external control/status register. Consult the
+ * programming documents for details unique to your board.
+ *
+ * For the TQM8xx(L) modules, there is no control register interface.
+ * All functions are directly controlled using I/O pins. See <asm/commproc.h>.
+ */
+
+/* The transmitter timeout
+ */
+#define TX_TIMEOUT (2*HZ)
+
+/* The number of Tx and Rx buffers. These are allocated from the page
+ * pool. The code may assume these are power of two, so it is best
+ * to keep them that size.
+ * We don't need to allocate pages for the transmitter. We just use
+ * the skbuffer directly.
+ */
+#ifdef CONFIG_ENET_BIG_BUFFERS
+#define CPM_ENET_RX_PAGES 32
+#define CPM_ENET_RX_FRSIZE 2048
+#define CPM_ENET_RX_FRPPG (PAGE_SIZE / CPM_ENET_RX_FRSIZE)
+#define RX_RING_SIZE (CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
+#define TX_RING_SIZE 64 /* Must be power of two */
+#define TX_RING_MOD_MASK 63 /* for this to work */
+#else
+#define CPM_ENET_RX_PAGES 4
+#define CPM_ENET_RX_FRSIZE 2048
+#define CPM_ENET_RX_FRPPG (PAGE_SIZE / CPM_ENET_RX_FRSIZE)
+#define RX_RING_SIZE (CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
+#define TX_RING_SIZE 8 /* Must be power of two */
+#define TX_RING_MOD_MASK 7 /* for this to work */
+#endif
+
+/* The CPM stores dest/src/type, data, and checksum for receive packets.
+ */
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+#define PKT_MAXBLR_SIZE 1520
+
+/* The CPM buffer descriptors track the ring buffers. The rx_bd_base and
+ * tx_bd_base always point to the base of the buffer descriptors. The
+ * cur_rx and cur_tx point to the currently available buffer.
+ * The dirty_tx tracks the current buffer that is being sent by the
+ * controller. The cur_tx and dirty_tx are equal under both completely
+ * empty and completely full conditions. The empty/ready indicator in
+ * the buffer descriptor determines the actual condition.
+ */
+struct scc_enet_private {
+ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
+ struct sk_buff* tx_skbuff[TX_RING_SIZE];
+ ushort skb_cur;
+ ushort skb_dirty;
+
+ /* CPM dual port RAM relative addresses.
+ */
+ cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
+ cbd_t *tx_bd_base;
+ cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
+ cbd_t *dirty_tx; /* The ring entries to be free()ed. */
+ scc_t *sccp;
+
+ /* Virtual addresses for the receive buffers because we can't
+ * do a __va() on them anymore.
+ */
+ unsigned char *rx_vaddr[RX_RING_SIZE];
+ struct net_device_stats stats;
+ uint tx_full;
+ spinlock_t lock;
+};
+
+static int scc_enet_open(struct net_device *dev);
+static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static int scc_enet_rx(struct net_device *dev);
+static void scc_enet_interrupt(void *dev_id, struct pt_regs *regs);
+static int scc_enet_close(struct net_device *dev);
+static struct net_device_stats *scc_enet_get_stats(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+
+/* Get this from various configuration locations (depends on board).
+*/
+/*static ushort my_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };*/
+
+/* Typically, 860(T) boards use SCC1 for Ethernet, and other 8xx boards
+ * use SCC2. Some even may use SCC3.
+ * This is easily extended if necessary.
+ */
+#if defined(CONFIG_SCC3_ENET)
+#define CPM_CR_ENET CPM_CR_CH_SCC3
+#define PROFF_ENET PROFF_SCC3
+#define SCC_ENET 2 /* Index, not number! */
+#define CPMVEC_ENET CPMVEC_SCC3
+#elif defined(CONFIG_SCC2_ENET)
+#define CPM_CR_ENET CPM_CR_CH_SCC2
+#define PROFF_ENET PROFF_SCC2
+#define SCC_ENET 1 /* Index, not number! */
+#define CPMVEC_ENET CPMVEC_SCC2
+#elif defined(CONFIG_SCC1_ENET)
+#define CPM_CR_ENET CPM_CR_CH_SCC1
+#define PROFF_ENET PROFF_SCC1
+#define SCC_ENET 0 /* Index, not number! */
+#define CPMVEC_ENET CPMVEC_SCC1
+#else
+#error CONFIG_SCCx_ENET not defined
+#endif
+
+static int
+scc_enet_open(struct net_device *dev)
+{
+
+ /* I should reset the ring buffers here, but I don't yet know
+ * a simple way to do that.
+ */
+
+ netif_start_queue(dev);
+ return 0; /* Always succeed */
+}
+
+static int
+scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
+ volatile cbd_t *bdp;
+
+ /* Fill in a Tx ring entry */
+ bdp = cep->cur_tx;
+
+#ifndef final_version
+ if (bdp->cbd_sc & BD_ENET_TX_READY) {
+ /* Ooops. All transmit buffers are full. Bail out.
+ * This should not happen, since cep->tx_busy should be set.
+ */
+ printk("%s: tx queue full!.\n", dev->name);
+ return 1;
+ }
+#endif
+
+ /* Clear all of the status flags.
+ */
+ bdp->cbd_sc &= ~BD_ENET_TX_STATS;
+
+ /* If the frame is short, tell CPM to pad it.
+ */
+ if (skb->len <= ETH_ZLEN)
+ bdp->cbd_sc |= BD_ENET_TX_PAD;
+ else
+ bdp->cbd_sc &= ~BD_ENET_TX_PAD;
+
+ /* Set buffer length and buffer pointer.
+ */
+ bdp->cbd_datlen = skb->len;
+ bdp->cbd_bufaddr = __pa(skb->data);
+
+ /* Save skb pointer.
+ */
+ cep->tx_skbuff[cep->skb_cur] = skb;
+
+ cep->stats.tx_bytes += skb->len;
+ cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
+
+ /* Push the data cache so the CPM does not get stale memory
+ * data.
+ */
+ flush_dcache_range((unsigned long)(skb->data),
+ (unsigned long)(skb->data + skb->len));
+
+ spin_lock_irq(&cep->lock);
+
+ /* Send it on its way. Tell CPM its ready, interrupt when done,
+ * its the last BD of the frame, and to put the CRC on the end.
+ */
+ bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
+
+ dev->trans_start = jiffies;
+
+ /* If this was the last BD in the ring, start at the beginning again.
+ */
+ if (bdp->cbd_sc & BD_ENET_TX_WRAP)
+ bdp = cep->tx_bd_base;
+ else
+ bdp++;
+
+ if (bdp->cbd_sc & BD_ENET_TX_READY) {
+ netif_stop_queue(dev);
+ cep->tx_full = 1;
+ }
+
+ cep->cur_tx = (cbd_t *)bdp;
+
+ spin_unlock_irq(&cep->lock);
+
+ return 0;
+}
+
+static void
+scc_enet_timeout(struct net_device *dev)
+{
+ struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
+
+ printk("%s: transmit timed out.\n", dev->name);
+ cep->stats.tx_errors++;
+#ifndef final_version
+ {
+ int i;
+ cbd_t *bdp;
+ printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n",
+ cep->cur_tx, cep->tx_full ? " (full)" : "",
+ cep->cur_rx);
+ bdp = cep->tx_bd_base;
+ for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
+ printk("%04x %04x %08x\n",
+ bdp->cbd_sc,
+ bdp->cbd_datlen,
+ bdp->cbd_bufaddr);
+ bdp = cep->rx_bd_base;
+ for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
+ printk("%04x %04x %08x\n",
+ bdp->cbd_sc,
+ bdp->cbd_datlen,
+ bdp->cbd_bufaddr);
+ }
+#endif
+ if (!cep->tx_full)
+ netif_wake_queue(dev);
+}
+
+/* The interrupt handler.
+ * This is called from the CPM handler, not the MPC core interrupt.
+ */
+static void
+scc_enet_interrupt(void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ volatile struct scc_enet_private *cep;
+ volatile cbd_t *bdp;
+ ushort int_events;
+ int must_restart;
+
+ cep = (struct scc_enet_private *)dev->priv;
+
+ /* Get the interrupt events that caused us to be here.
+ */
+ int_events = cep->sccp->scc_scce;
+ cep->sccp->scc_scce = int_events;
+ must_restart = 0;
+
+ /* Handle receive event in its own function.
+ */
+ if (int_events & SCCE_ENET_RXF)
+ scc_enet_rx(dev_id);
+
+ /* Check for a transmit error. The manual is a little unclear
+ * about this, so the debug code until I get it figured out. It
+ * appears that if TXE is set, then TXB is not set. However,
+ * if carrier sense is lost during frame transmission, the TXE
+ * bit is set, "and continues the buffer transmission normally."
+ * I don't know if "normally" implies TXB is set when the buffer
+ * descriptor is closed.....trial and error :-).
+ */
+
+ /* Transmit OK, or non-fatal error. Update the buffer descriptors.
+ */
+ if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) {
+ spin_lock(&cep->lock);
+ bdp = cep->dirty_tx;
+ while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
+ if ((bdp==cep->cur_tx) && (cep->tx_full == 0))
+ break;
+
+ if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */
+ cep->stats.tx_heartbeat_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */
+ cep->stats.tx_window_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */
+ cep->stats.tx_aborted_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */
+ cep->stats.tx_fifo_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
+ cep->stats.tx_carrier_errors++;
+
+
+ /* No heartbeat or Lost carrier are not really bad errors.
+ * The others require a restart transmit command.
+ */
+ if (bdp->cbd_sc &
+ (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
+ must_restart = 1;
+ cep->stats.tx_errors++;
+ }
+
+ cep->stats.tx_packets++;
+
+ /* Deferred means some collisions occurred during transmit,
+ * but we eventually sent the packet OK.
+ */
+ if (bdp->cbd_sc & BD_ENET_TX_DEF)
+ cep->stats.collisions++;
+
+ /* Free the sk buffer associated with this last transmit.
+ */
+ dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
+ cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
+
+ /* Update pointer to next buffer descriptor to be transmitted.
+ */
+ if (bdp->cbd_sc & BD_ENET_TX_WRAP)
+ bdp = cep->tx_bd_base;
+ else
+ bdp++;
+
+ /* I don't know if we can be held off from processing these
+ * interrupts for more than one frame time. I really hope
+ * not. In such a case, we would now want to check the
+ * currently available BD (cur_tx) and determine if any
+ * buffers between the dirty_tx and cur_tx have also been
+ * sent. We would want to process anything in between that
+ * does not have BD_ENET_TX_READY set.
+ */
+
+ /* Since we have freed up a buffer, the ring is no longer
+ * full.
+ */
+ if (cep->tx_full) {
+ cep->tx_full = 0;
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ }
+
+ cep->dirty_tx = (cbd_t *)bdp;
+ }
+
+ if (must_restart) {
+ volatile cpm8xx_t *cp;
+
+ /* Some transmit errors cause the transmitter to shut
+ * down. We now issue a restart transmit. Since the
+ * errors close the BD and update the pointers, the restart
+ * _should_ pick up without having to reset any of our
+ * pointers either.
+ */
+ cp = cpmp;
+ cp->cp_cpcr =
+ mk_cr_cmd(CPM_CR_ENET, CPM_CR_RESTART_TX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+ }
+ spin_unlock(&cep->lock);
+ }
+
+ /* Check for receive busy, i.e. packets coming but no place to
+ * put them. This "can't happen" because the receive interrupt
+ * is tossing previous frames.
+ */
+ if (int_events & SCCE_ENET_BSY) {
+ cep->stats.rx_dropped++;
+ printk("CPM ENET: BSY can't happen.\n");
+ }
+
+ return;
+}
+
+/* During a receive, the cur_rx points to the current incoming buffer.
+ * When we update through the ring, if the next incoming buffer has
+ * not been given to the system, we just set the empty indicator,
+ * effectively tossing the packet.
+ */
+static int
+scc_enet_rx(struct net_device *dev)
+{
+ struct scc_enet_private *cep;
+ volatile cbd_t *bdp;
+ struct sk_buff *skb;
+ ushort pkt_len;
+
+ cep = (struct scc_enet_private *)dev->priv;
+
+ /* First, grab all of the stats for the incoming packet.
+ * These get messed up if we get called due to a busy condition.
+ */
+ bdp = cep->cur_rx;
+
+for (;;) {
+ if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
+ break;
+
+#ifndef final_version
+ /* Since we have allocated space to hold a complete frame, both
+ * the first and last indicators should be set.
+ */
+ if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
+ (BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
+ printk("CPM ENET: rcv is not first+last\n");
+#endif
+
+ /* Frame too long or too short.
+ */
+ if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
+ cep->stats.rx_length_errors++;
+ if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */
+ cep->stats.rx_frame_errors++;
+ if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */
+ cep->stats.rx_crc_errors++;
+ if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */
+ cep->stats.rx_crc_errors++;
+
+ /* Report late collisions as a frame error.
+ * On this error, the BD is closed, but we don't know what we
+ * have in the buffer. So, just drop this frame on the floor.
+ */
+ if (bdp->cbd_sc & BD_ENET_RX_CL) {
+ cep->stats.rx_frame_errors++;
+ }
+ else {
+
+ /* Process the incoming frame.
+ */
+ cep->stats.rx_packets++;
+ pkt_len = bdp->cbd_datlen;
+ cep->stats.rx_bytes += pkt_len;
+
+ /* This does 16 byte alignment, much more than we need.
+ * The packet length includes FCS, but we don't want to
+ * include that when passing upstream as it messes up
+ * bridging applications.
+ */
+ skb = dev_alloc_skb(pkt_len-4);
+
+ if (skb == NULL) {
+ printk("%s: Memory squeeze, dropping packet.\n", dev->name);
+ cep->stats.rx_dropped++;
+ }
+ else {
+ skb->dev = dev;
+ skb_put(skb,pkt_len-4); /* Make room */
+ eth_copy_and_sum(skb,
+ cep->rx_vaddr[bdp - cep->rx_bd_base],
+ pkt_len-4, 0);
+ skb->protocol=eth_type_trans(skb,dev);
+ netif_rx(skb);
+ }
+ }
+
+ /* Clear the status flags for this buffer.
+ */
+ bdp->cbd_sc &= ~BD_ENET_RX_STATS;
+
+ /* Mark the buffer empty.
+ */
+ bdp->cbd_sc |= BD_ENET_RX_EMPTY;
+
+ /* Update BD pointer to next entry.
+ */
+ if (bdp->cbd_sc & BD_ENET_RX_WRAP)
+ bdp = cep->rx_bd_base;
+ else
+ bdp++;
+
+ }
+ cep->cur_rx = (cbd_t *)bdp;
+
+ return 0;
+}
+
+static int
+scc_enet_close(struct net_device *dev)
+{
+ /* Don't know what to do yet.
+ */
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+static struct net_device_stats *scc_enet_get_stats(struct net_device *dev)
+{
+ struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
+
+ return &cep->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ * Skeleton taken from sunlance driver.
+ * The CPM Ethernet implementation allows Multicast as well as individual
+ * MAC address filtering. Some of the drivers check to make sure it is
+ * a group multicast address, and discard those that are not. I guess I
+ * will do the same for now, but just remove the test if you want
+ * individual filtering as well (do the upper net layers want or support
+ * this kind of feature?).
+ */
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct scc_enet_private *cep;
+ struct dev_mc_list *dmi;
+ u_char *mcptr, *tdptr;
+ volatile scc_enet_t *ep;
+ int i, j;
+ cep = (struct scc_enet_private *)dev->priv;
+
+ /* Get pointer to SCC area in parameter RAM.
+ */
+ ep = (scc_enet_t *)dev->base_addr;
+
+ if (dev->flags&IFF_PROMISC) {
+
+ /* Log any net taps. */
+ printk("%s: Promiscuous mode enabled.\n", dev->name);
+ cep->sccp->scc_psmr |= SCC_PSMR_PRO;
+ } else {
+
+ cep->sccp->scc_psmr &= ~SCC_PSMR_PRO;
+
+ if (dev->flags & IFF_ALLMULTI) {
+ /* Catch all multicast addresses, so set the
+ * filter to all 1's.
+ */
+ ep->sen_gaddr1 = 0xffff;
+ ep->sen_gaddr2 = 0xffff;
+ ep->sen_gaddr3 = 0xffff;
+ ep->sen_gaddr4 = 0xffff;
+ }
+ else {
+ /* Clear filter and add the addresses in the list.
+ */
+ ep->sen_gaddr1 = 0;
+ ep->sen_gaddr2 = 0;
+ ep->sen_gaddr3 = 0;
+ ep->sen_gaddr4 = 0;
+
+ dmi = dev->mc_list;
+
+ for (i=0; i<dev->mc_count; i++) {
+
+ /* Only support group multicast for now.
+ */
+ if (!(dmi->dmi_addr[0] & 1))
+ continue;
+
+ /* The address in dmi_addr is LSB first,
+ * and taddr is MSB first. We have to
+ * copy bytes MSB first from dmi_addr.
+ */
+ mcptr = (u_char *)dmi->dmi_addr + 5;
+ tdptr = (u_char *)&ep->sen_taddrh;
+ for (j=0; j<6; j++)
+ *tdptr++ = *mcptr--;
+
+ /* Ask CPM to run CRC and set bit in
+ * filter mask.
+ */
+ cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_SET_GADDR) | CPM_CR_FLG;
+ /* this delay is necessary here -- Cort */
+ udelay(10);
+ while (cpmp->cp_cpcr & CPM_CR_FLG);
+ }
+ }
+ }
+}
+
+/* Initialize the CPM Ethernet on SCC. If EPPC-Bug loaded us, or performed
+ * some other network I/O, a whole bunch of this has already been set up.
+ * It is no big deal if we do it again, we just have to disable the
+ * transmit and receive to make sure we don't catch the CPM with some
+ * inconsistent control information.
+ */
+static int __init scc_enet_init(void)
+{
+ struct net_device *dev;
+ struct scc_enet_private *cep;
+ int i, j, k, err;
+ uint dp_offset;
+ unsigned char *eap, *ba;
+ dma_addr_t mem_addr;
+ bd_t *bd;
+ volatile cbd_t *bdp;
+ volatile cpm8xx_t *cp;
+ volatile scc_t *sccp;
+ volatile scc_enet_t *ep;
+ volatile immap_t *immap;
+
+ cp = cpmp; /* Get pointer to Communication Processor */
+
+ immap = (immap_t *)(mfspr(SPRN_IMMR) & 0xFFFF0000); /* and to internal registers */
+
+ bd = (bd_t *)__res;
+
+ dev = alloc_etherdev(sizeof(*cep));
+ if (!dev)
+ return -ENOMEM;
+
+ cep = dev->priv;
+ spin_lock_init(&cep->lock);
+
+ /* Get pointer to SCC area in parameter RAM.
+ */
+ ep = (scc_enet_t *)(&cp->cp_dparam[PROFF_ENET]);
+
+ /* And another to the SCC register area.
+ */
+ sccp = (volatile scc_t *)(&cp->cp_scc[SCC_ENET]);
+ cep->sccp = (scc_t *)sccp; /* Keep the pointer handy */
+
+ /* Disable receive and transmit in case EPPC-Bug started it.
+ */
+ sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /* Cookbook style from the MPC860 manual.....
+ * Not all of this is necessary if EPPC-Bug has initialized
+ * the network.
+ * So far we are lucky, all board configurations use the same
+ * pins, or at least the same I/O Port for these functions.....
+ * It can't last though......
+ */
+
+#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
+ /* Configure port A pins for Txd and Rxd.
+ */
+ immap->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
+ immap->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
+ immap->im_ioport.iop_paodr &= ~PA_ENET_TXD;
+#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
+ /* Configure port B pins for Txd and Rxd.
+ */
+ immap->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
+ immap->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
+ immap->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
+#else
+#error Exactly ONE pair of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
+#endif
+
+#if defined(PC_ENET_LBK)
+ /* Configure port C pins to disable External Loopback
+ */
+ immap->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
+ immap->im_ioport.iop_pcdir |= PC_ENET_LBK;
+ immap->im_ioport.iop_pcso &= ~PC_ENET_LBK;
+ immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
+#endif /* PC_ENET_LBK */
+
+ /* Configure port C pins to enable CLSN and RENA.
+ */
+ immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
+
+ /* Configure port A for TCLK and RCLK.
+ */
+ immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
+ immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
+
+ /* Configure Serial Interface clock routing.
+ * First, clear all SCC bits to zero, then set the ones we want.
+ */
+ cp->cp_sicr &= ~SICR_ENET_MASK;
+ cp->cp_sicr |= SICR_ENET_CLKRT;
+
+ /* Manual says set SDDR, but I can't find anything with that
+ * name. I think it is a misprint, and should be SDCR. This
+ * has already been set by the communication processor initialization.
+ */
+
+ /* Allocate space for the buffer descriptors in the DP ram.
+ * These are relative offsets in the DP ram address space.
+ * Initialize base addresses for the buffer descriptors.
+ */
+ dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8);
+ ep->sen_genscc.scc_rbase = dp_offset;
+ cep->rx_bd_base = cpm_dpram_addr(dp_offset);
+
+ dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8);
+ ep->sen_genscc.scc_tbase = dp_offset;
+ cep->tx_bd_base = cpm_dpram_addr(dp_offset);
+
+ cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
+ cep->cur_rx = cep->rx_bd_base;
+
+ /* Issue init Rx BD command for SCC.
+ * Manual says to perform an Init Rx parameters here. We have
+ * to perform both Rx and Tx because the SCC may have been
+ * already running.
+ * In addition, we have to do it later because we don't yet have
+ * all of the BD control/status set properly.
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_RX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+ */
+
+ /* Initialize function code registers for big-endian.
+ */
+ ep->sen_genscc.scc_rfcr = SCC_EB;
+ ep->sen_genscc.scc_tfcr = SCC_EB;
+
+ /* Set maximum bytes per receive buffer.
+ * This appears to be an Ethernet frame size, not the buffer
+ * fragment size. It must be a multiple of four.
+ */
+ ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE;
+
+ /* Set CRC preset and mask.
+ */
+ ep->sen_cpres = 0xffffffff;
+ ep->sen_cmask = 0xdebb20e3;
+
+ ep->sen_crcec = 0; /* CRC Error counter */
+ ep->sen_alec = 0; /* alignment error counter */
+ ep->sen_disfc = 0; /* discard frame counter */
+
+ ep->sen_pads = 0x8888; /* Tx short frame pad character */
+ ep->sen_retlim = 15; /* Retry limit threshold */
+
+ ep->sen_maxflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
+ ep->sen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */
+
+ ep->sen_maxd1 = PKT_MAXBLR_SIZE; /* maximum DMA1 length */
+ ep->sen_maxd2 = PKT_MAXBLR_SIZE; /* maximum DMA2 length */
+
+ /* Clear hash tables.
+ */
+ ep->sen_gaddr1 = 0;
+ ep->sen_gaddr2 = 0;
+ ep->sen_gaddr3 = 0;
+ ep->sen_gaddr4 = 0;
+ ep->sen_iaddr1 = 0;
+ ep->sen_iaddr2 = 0;
+ ep->sen_iaddr3 = 0;
+ ep->sen_iaddr4 = 0;
+
+ /* Set Ethernet station address.
+ */
+ eap = (unsigned char *)&(ep->sen_paddrh);
+ for (i=5; i>=0; i--)
+ *eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
+
+ ep->sen_pper = 0; /* 'cause the book says so */
+ ep->sen_taddrl = 0; /* temp address (LSB) */
+ ep->sen_taddrm = 0;
+ ep->sen_taddrh = 0; /* temp address (MSB) */
+
+ /* Now allocate the host memory pages and initialize the
+ * buffer descriptors.
+ */
+ bdp = cep->tx_bd_base;
+ for (i=0; i<TX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page.
+ */
+ bdp->cbd_sc = 0;
+ bdp->cbd_bufaddr = 0;
+ bdp++;
+ }
+
+ /* Set the last buffer to wrap.
+ */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ bdp = cep->rx_bd_base;
+ k = 0;
+ for (i=0; i<CPM_ENET_RX_PAGES; i++) {
+
+ /* Allocate a page.
+ */
+ ba = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE,
+ &mem_addr, GFP_KERNEL);
+ /* BUG: no check for failure */
+
+ /* Initialize the BD for every fragment in the page.
+ */
+ for (j=0; j<CPM_ENET_RX_FRPPG; j++) {
+ bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
+ bdp->cbd_bufaddr = mem_addr;
+ cep->rx_vaddr[k++] = ba;
+ mem_addr += CPM_ENET_RX_FRSIZE;
+ ba += CPM_ENET_RX_FRSIZE;
+ bdp++;
+ }
+ }
+
+ /* Set the last buffer to wrap.
+ */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ /* Let's re-initialize the channel now. We have to do it later
+ * than the manual describes because we have just now finished
+ * the BD initialization.
+ */
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+
+ cep->skb_cur = cep->skb_dirty = 0;
+
+ sccp->scc_scce = 0xffff; /* Clear any pending events */
+
+ /* Enable interrupts for transmit error, complete frame
+ * received, and any transmit buffer we have also set the
+ * interrupt flag.
+ */
+ sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
+
+ /* Install our interrupt handler.
+ */
+ cpm_install_handler(CPMVEC_ENET, scc_enet_interrupt, dev);
+
+ /* Set GSMR_H to enable all normal operating modes.
+ * Set GSMR_L to enable Ethernet to MC68160.
+ */
+ sccp->scc_gsmrh = 0;
+ sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET);
+
+ /* Set sync/delimiters.
+ */
+ sccp->scc_dsr = 0xd555;
+
+ /* Set processing mode. Use Ethernet CRC, catch broadcast, and
+ * start frame search 22 bit times after RENA.
+ */
+ sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
+
+ /* It is now OK to enable the Ethernet transmitter.
+ * Unfortunately, there are board implementation differences here.
+ */
+#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA))
+ immap->im_ioport.iop_pcpar |= PC_ENET_TENA;
+ immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
+#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA))
+ cp->cp_pbpar |= PB_ENET_TENA;
+ cp->cp_pbdir |= PB_ENET_TENA;
+#else
+#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA
+#endif
+
+#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
+ /* And while we are here, set the configuration to enable ethernet.
+ */
+ *((volatile uint *)RPX_CSR_ADDR) &= ~BCSR0_ETHLPBK;
+ *((volatile uint *)RPX_CSR_ADDR) |=
+ (BCSR0_ETHEN | BCSR0_COLTESTDIS | BCSR0_FULLDPLXDIS);
+#endif
+
+#ifdef CONFIG_BSEIP
+ /* BSE uses port B and C for PHY control.
+ */
+ cp->cp_pbpar &= ~(PB_BSE_POWERUP | PB_BSE_FDXDIS);
+ cp->cp_pbdir |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
+ cp->cp_pbdat |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
+
+ immap->im_ioport.iop_pcpar &= ~PC_BSE_LOOPBACK;
+ immap->im_ioport.iop_pcdir |= PC_BSE_LOOPBACK;
+ immap->im_ioport.iop_pcso &= ~PC_BSE_LOOPBACK;
+ immap->im_ioport.iop_pcdat &= ~PC_BSE_LOOPBACK;
+#endif
+
+#ifdef CONFIG_FADS
+ cp->cp_pbpar |= PB_ENET_TENA;
+ cp->cp_pbdir |= PB_ENET_TENA;
+
+ /* Enable the EEST PHY.
+ */
+ *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
+#endif
+
+ dev->base_addr = (unsigned long)ep;
+#if 0
+ dev->name = "CPM_ENET";
+#endif
+
+ /* The CPM Ethernet specific entries in the device structure. */
+ dev->open = scc_enet_open;
+ dev->hard_start_xmit = scc_enet_start_xmit;
+ dev->tx_timeout = scc_enet_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->stop = scc_enet_close;
+ dev->get_stats = scc_enet_get_stats;
+ dev->set_multicast_list = set_multicast_list;
+
+ err = register_netdev(dev);
+ if (err) {
+ free_netdev(dev);
+ return err;
+ }
+
+ /* And last, enable the transmit and receive processing.
+ */
+ sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ printk("%s: CPM ENET Version 0.2 on SCC%d, ", dev->name, SCC_ENET+1);
+ for (i=0; i<5; i++)
+ printk("%02x:", dev->dev_addr[i]);
+ printk("%02x\n", dev->dev_addr[5]);
+
+ return 0;
+}
+
+module_init(scc_enet_init);
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
new file mode 100644
index 000000000000..0730392dcc20
--- /dev/null
+++ b/arch/ppc/8xx_io/fec.c
@@ -0,0 +1,1973 @@
+/*
+ * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * This version of the driver is specific to the FADS implementation,
+ * since the board contains control registers external to the processor
+ * for the control of the LevelOne LXT970 transceiver. The MPC860T manual
+ * describes connections using the internal parallel port I/O, which
+ * is basically all of Port D.
+ *
+ * Includes support for the following PHYs: QS6612, LXT970, LXT971/2.
+ *
+ * Right now, I am very wasteful with the buffers. I allocate memory
+ * pages and then divide them into 2K frame buffers. This way I know I
+ * have buffers large enough to hold one frame within one buffer descriptor.
+ * Once I get this working, I will use 64 or 128 byte CPM buffers, which
+ * will be much more memory efficient and will easily handle lots of
+ * small packets.
+ *
+ * Much better multiple PHY support by Magnus Damm.
+ * Copyright (c) 2000 Ericsson Radio Systems AB.
+ *
+ * Make use of MII for PHY control configurable.
+ * Some fixes.
+ * Copyright (c) 2000-2002 Wolfgang Denk, DENX Software Engineering.
+ *
+ * Support for AMD AM79C874 added.
+ * Thomas Lange, thomas@corelatus.com
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#ifdef CONFIG_FEC_PACKETHOOK
+#include <linux/pkthook.h>
+#endif
+
+#include <asm/8xx_immap.h>
+#include <asm/pgtable.h>
+#include <asm/mpc8xx.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/commproc.h>
+
+#ifdef CONFIG_USE_MDIO
+/* Forward declarations of some structures to support different PHYs
+*/
+
+typedef struct {
+ uint mii_data;
+ void (*funct)(uint mii_reg, struct net_device *dev);
+} phy_cmd_t;
+
+typedef struct {
+ uint id;
+ char *name;
+
+ const phy_cmd_t *config;
+ const phy_cmd_t *startup;
+ const phy_cmd_t *ack_int;
+ const phy_cmd_t *shutdown;
+} phy_info_t;
+#endif /* CONFIG_USE_MDIO */
+
+/* The number of Tx and Rx buffers. These are allocated from the page
+ * pool. The code may assume these are power of two, so it is best
+ * to keep them that size.
+ * We don't need to allocate pages for the transmitter. We just use
+ * the skbuffer directly.
+ */
+#ifdef CONFIG_ENET_BIG_BUFFERS
+#define FEC_ENET_RX_PAGES 16
+#define FEC_ENET_RX_FRSIZE 2048
+#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE)
+#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
+#define TX_RING_SIZE 16 /* Must be power of two */
+#define TX_RING_MOD_MASK 15 /* for this to work */
+#else
+#define FEC_ENET_RX_PAGES 4
+#define FEC_ENET_RX_FRSIZE 2048
+#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE)
+#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
+#define TX_RING_SIZE 8 /* Must be power of two */
+#define TX_RING_MOD_MASK 7 /* for this to work */
+#endif
+
+/* Interrupt events/masks.
+*/
+#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
+#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
+#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
+#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
+#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
+#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
+#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
+#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
+#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
+#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
+
+/*
+*/
+#define FEC_ECNTRL_PINMUX 0x00000004
+#define FEC_ECNTRL_ETHER_EN 0x00000002
+#define FEC_ECNTRL_RESET 0x00000001
+
+#define FEC_RCNTRL_BC_REJ 0x00000010
+#define FEC_RCNTRL_PROM 0x00000008
+#define FEC_RCNTRL_MII_MODE 0x00000004
+#define FEC_RCNTRL_DRT 0x00000002
+#define FEC_RCNTRL_LOOP 0x00000001
+
+#define FEC_TCNTRL_FDEN 0x00000004
+#define FEC_TCNTRL_HBC 0x00000002
+#define FEC_TCNTRL_GTS 0x00000001
+
+/* Delay to wait for FEC reset command to complete (in us)
+*/
+#define FEC_RESET_DELAY 50
+
+/* The FEC stores dest/src/type, data, and checksum for receive packets.
+ */
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+#define PKT_MAXBLR_SIZE 1520
+
+/* The FEC buffer descriptors track the ring buffers. The rx_bd_base and
+ * tx_bd_base always point to the base of the buffer descriptors. The
+ * cur_rx and cur_tx point to the currently available buffer.
+ * The dirty_tx tracks the current buffer that is being sent by the
+ * controller. The cur_tx and dirty_tx are equal under both completely
+ * empty and completely full conditions. The empty/ready indicator in
+ * the buffer descriptor determines the actual condition.
+ */
+struct fec_enet_private {
+ /* The saved address of a sent-in-place packet/buffer, for skfree(). */
+ struct sk_buff* tx_skbuff[TX_RING_SIZE];
+ ushort skb_cur;
+ ushort skb_dirty;
+
+ /* CPM dual port RAM relative addresses.
+ */
+ cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
+ cbd_t *tx_bd_base;
+ cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
+ cbd_t *dirty_tx; /* The ring entries to be free()ed. */
+
+ /* Virtual addresses for the receive buffers because we can't
+ * do a __va() on them anymore.
+ */
+ unsigned char *rx_vaddr[RX_RING_SIZE];
+
+ struct net_device_stats stats;
+ uint tx_full;
+ spinlock_t lock;
+
+#ifdef CONFIG_USE_MDIO
+ uint phy_id;
+ uint phy_id_done;
+ uint phy_status;
+ uint phy_speed;
+ phy_info_t *phy;
+ struct tq_struct phy_task;
+
+ uint sequence_done;
+
+ uint phy_addr;
+#endif /* CONFIG_USE_MDIO */
+
+ int link;
+ int old_link;
+ int full_duplex;
+
+#ifdef CONFIG_FEC_PACKETHOOK
+ unsigned long ph_lock;
+ fec_ph_func *ph_rxhandler;
+ fec_ph_func *ph_txhandler;
+ __u16 ph_proto;
+ volatile __u32 *ph_regaddr;
+ void *ph_priv;
+#endif
+};
+
+static int fec_enet_open(struct net_device *dev);
+static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
+#ifdef CONFIG_USE_MDIO
+static void fec_enet_mii(struct net_device *dev);
+#endif /* CONFIG_USE_MDIO */
+static void fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs);
+#ifdef CONFIG_FEC_PACKETHOOK
+static void fec_enet_tx(struct net_device *dev, __u32 regval);
+static void fec_enet_rx(struct net_device *dev, __u32 regval);
+#else
+static void fec_enet_tx(struct net_device *dev);
+static void fec_enet_rx(struct net_device *dev);
+#endif
+static int fec_enet_close(struct net_device *dev);
+static struct net_device_stats *fec_enet_get_stats(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static void fec_restart(struct net_device *dev, int duplex);
+static void fec_stop(struct net_device *dev);
+static ushort my_enet_addr[3];
+
+#ifdef CONFIG_USE_MDIO
+/* MII processing. We keep this as simple as possible. Requests are
+ * placed on the list (if there is room). When the request is finished
+ * by the MII, an optional function may be called.
+ */
+typedef struct mii_list {
+ uint mii_regval;
+ void (*mii_func)(uint val, struct net_device *dev);
+ struct mii_list *mii_next;
+} mii_list_t;
+
+#define NMII 20
+mii_list_t mii_cmds[NMII];
+mii_list_t *mii_free;
+mii_list_t *mii_head;
+mii_list_t *mii_tail;
+
+static int mii_queue(struct net_device *dev, int request,
+ void (*func)(uint, struct net_device *));
+
+/* Make MII read/write commands for the FEC.
+*/
+#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
+#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \
+ (VAL & 0xffff))
+#define mk_mii_end 0
+#endif /* CONFIG_USE_MDIO */
+
+/* Transmitter timeout.
+*/
+#define TX_TIMEOUT (2*HZ)
+
+#ifdef CONFIG_USE_MDIO
+/* Register definitions for the PHY.
+*/
+
+#define MII_REG_CR 0 /* Control Register */
+#define MII_REG_SR 1 /* Status Register */
+#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */
+#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */
+#define MII_REG_ANAR 4 /* A-N Advertisement Register */
+#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */
+#define MII_REG_ANER 6 /* A-N Expansion Register */
+#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */
+#define MII_REG_ANLPRNPR 8 /* A-N Link Partner Received Next Page Reg. */
+
+/* values for phy_status */
+
+#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */
+#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */
+#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */
+#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */
+#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
+#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */
+#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
+
+#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */
+#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */
+#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */
+#define PHY_STAT_SPMASK 0xf000 /* mask for speed */
+#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */
+#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
+#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */
+#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
+#endif /* CONFIG_USE_MDIO */
+
+#ifdef CONFIG_FEC_PACKETHOOK
+int
+fec_register_ph(struct net_device *dev, fec_ph_func *rxfun, fec_ph_func *txfun,
+ __u16 proto, volatile __u32 *regaddr, void *priv)
+{
+ struct fec_enet_private *fep;
+ int retval = 0;
+
+ fep = dev->priv;
+
+ if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) {
+ /* Someone is messing with the packet hook */
+ return -EAGAIN;
+ }
+ if (fep->ph_rxhandler != NULL || fep->ph_txhandler != NULL) {
+ retval = -EBUSY;
+ goto out;
+ }
+ fep->ph_rxhandler = rxfun;
+ fep->ph_txhandler = txfun;
+ fep->ph_proto = proto;
+ fep->ph_regaddr = regaddr;
+ fep->ph_priv = priv;
+
+ out:
+ fep->ph_lock = 0;
+
+ return retval;
+}
+
+
+int
+fec_unregister_ph(struct net_device *dev)
+{
+ struct fec_enet_private *fep;
+ int retval = 0;
+
+ fep = dev->priv;
+
+ if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) {
+ /* Someone is messing with the packet hook */
+ return -EAGAIN;
+ }
+
+ fep->ph_rxhandler = fep->ph_txhandler = NULL;
+ fep->ph_proto = 0;
+ fep->ph_regaddr = NULL;
+ fep->ph_priv = NULL;
+
+ fep->ph_lock = 0;
+
+ return retval;
+}
+
+EXPORT_SYMBOL(fec_register_ph);
+EXPORT_SYMBOL(fec_unregister_ph);
+
+#endif /* CONFIG_FEC_PACKETHOOK */
+
+static int
+fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct fec_enet_private *fep;
+ volatile fec_t *fecp;
+ volatile cbd_t *bdp;
+
+ fep = dev->priv;
+ fecp = (volatile fec_t*)dev->base_addr;
+
+ if (!fep->link) {
+ /* Link is down or autonegotiation is in progress. */
+ return 1;
+ }
+
+ /* Fill in a Tx ring entry */
+ bdp = fep->cur_tx;
+
+#ifndef final_version
+ if (bdp->cbd_sc & BD_ENET_TX_READY) {
+ /* Ooops. All transmit buffers are full. Bail out.
+ * This should not happen, since dev->tbusy should be set.
+ */
+ printk("%s: tx queue full!.\n", dev->name);
+ return 1;
+ }
+#endif
+
+ /* Clear all of the status flags.
+ */
+ bdp->cbd_sc &= ~BD_ENET_TX_STATS;
+
+ /* Set buffer length and buffer pointer.
+ */
+ bdp->cbd_bufaddr = __pa(skb->data);
+ bdp->cbd_datlen = skb->len;
+
+ /* Save skb pointer.
+ */
+ fep->tx_skbuff[fep->skb_cur] = skb;
+
+ fep->stats.tx_bytes += skb->len;
+ fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
+
+ /* Push the data cache so the CPM does not get stale memory
+ * data.
+ */
+ flush_dcache_range((unsigned long)skb->data,
+ (unsigned long)skb->data + skb->len);
+
+ /* disable interrupts while triggering transmit */
+ spin_lock_irq(&fep->lock);
+
+ /* Send it on its way. Tell FEC its ready, interrupt when done,
+ * its the last BD of the frame, and to put the CRC on the end.
+ */
+
+ bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
+ | BD_ENET_TX_LAST | BD_ENET_TX_TC);
+
+ dev->trans_start = jiffies;
+
+ /* Trigger transmission start */
+ fecp->fec_x_des_active = 0x01000000;
+
+ /* If this was the last BD in the ring, start at the beginning again.
+ */
+ if (bdp->cbd_sc & BD_ENET_TX_WRAP) {
+ bdp = fep->tx_bd_base;
+ } else {
+ bdp++;
+ }
+
+ if (bdp->cbd_sc & BD_ENET_TX_READY) {
+ netif_stop_queue(dev);
+ fep->tx_full = 1;
+ }
+
+ fep->cur_tx = (cbd_t *)bdp;
+
+ spin_unlock_irq(&fep->lock);
+
+ return 0;
+}
+
+static void
+fec_timeout(struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+
+ printk("%s: transmit timed out.\n", dev->name);
+ fep->stats.tx_errors++;
+#ifndef final_version
+ {
+ int i;
+ cbd_t *bdp;
+
+ printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n",
+ (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "",
+ (unsigned long)fep->dirty_tx,
+ (unsigned long)fep->cur_rx);
+
+ bdp = fep->tx_bd_base;
+ printk(" tx: %u buffers\n", TX_RING_SIZE);
+ for (i = 0 ; i < TX_RING_SIZE; i++) {
+ printk(" %08x: %04x %04x %08x\n",
+ (uint) bdp,
+ bdp->cbd_sc,
+ bdp->cbd_datlen,
+ bdp->cbd_bufaddr);
+ bdp++;
+ }
+
+ bdp = fep->rx_bd_base;
+ printk(" rx: %lu buffers\n", RX_RING_SIZE);
+ for (i = 0 ; i < RX_RING_SIZE; i++) {
+ printk(" %08x: %04x %04x %08x\n",
+ (uint) bdp,
+ bdp->cbd_sc,
+ bdp->cbd_datlen,
+ bdp->cbd_bufaddr);
+ bdp++;
+ }
+ }
+#endif
+ if (!fep->tx_full)
+ netif_wake_queue(dev);
+}
+
+/* The interrupt handler.
+ * This is called from the MPC core interrupt.
+ */
+static void
+fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+{
+ struct net_device *dev = dev_id;
+ volatile fec_t *fecp;
+ uint int_events;
+#ifdef CONFIG_FEC_PACKETHOOK
+ struct fec_enet_private *fep = dev->priv;
+ __u32 regval;
+
+ if (fep->ph_regaddr) regval = *fep->ph_regaddr;
+#endif
+ fecp = (volatile fec_t*)dev->base_addr;
+
+ /* Get the interrupt events that caused us to be here.
+ */
+ while ((int_events = fecp->fec_ievent) != 0) {
+ fecp->fec_ievent = int_events;
+ if ((int_events & (FEC_ENET_HBERR | FEC_ENET_BABR |
+ FEC_ENET_BABT | FEC_ENET_EBERR)) != 0) {
+ printk("FEC ERROR %x\n", int_events);
+ }
+
+ /* Handle receive event in its own function.
+ */
+ if (int_events & FEC_ENET_RXF) {
+#ifdef CONFIG_FEC_PACKETHOOK
+ fec_enet_rx(dev, regval);
+#else
+ fec_enet_rx(dev);
+#endif
+ }
+
+ /* Transmit OK, or non-fatal error. Update the buffer
+ descriptors. FEC handles all errors, we just discover
+ them as part of the transmit process.
+ */
+ if (int_events & FEC_ENET_TXF) {
+#ifdef CONFIG_FEC_PACKETHOOK
+ fec_enet_tx(dev, regval);
+#else
+ fec_enet_tx(dev);
+#endif
+ }
+
+ if (int_events & FEC_ENET_MII) {
+#ifdef CONFIG_USE_MDIO
+ fec_enet_mii(dev);
+#else
+printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTION__);
+#endif /* CONFIG_USE_MDIO */
+ }
+
+ }
+}
+
+
+static void
+#ifdef CONFIG_FEC_PACKETHOOK
+fec_enet_tx(struct net_device *dev, __u32 regval)
+#else
+fec_enet_tx(struct net_device *dev)
+#endif
+{
+ struct fec_enet_private *fep;
+ volatile cbd_t *bdp;
+ struct sk_buff *skb;
+
+ fep = dev->priv;
+ /* lock while transmitting */
+ spin_lock(&fep->lock);
+ bdp = fep->dirty_tx;
+
+ while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) {
+ if (bdp == fep->cur_tx && fep->tx_full == 0) break;
+
+ skb = fep->tx_skbuff[fep->skb_dirty];
+ /* Check for errors. */
+ if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
+ BD_ENET_TX_RL | BD_ENET_TX_UN |
+ BD_ENET_TX_CSL)) {
+ fep->stats.tx_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */
+ fep->stats.tx_heartbeat_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */
+ fep->stats.tx_window_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */
+ fep->stats.tx_aborted_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */
+ fep->stats.tx_fifo_errors++;
+ if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
+ fep->stats.tx_carrier_errors++;
+ } else {
+#ifdef CONFIG_FEC_PACKETHOOK
+ /* Packet hook ... */
+ if (fep->ph_txhandler &&
+ ((struct ethhdr *)skb->data)->h_proto
+ == fep->ph_proto) {
+ fep->ph_txhandler((__u8*)skb->data, skb->len,
+ regval, fep->ph_priv);
+ }
+#endif
+ fep->stats.tx_packets++;
+ }
+
+#ifndef final_version
+ if (bdp->cbd_sc & BD_ENET_TX_READY)
+ printk("HEY! Enet xmit interrupt and TX_READY.\n");
+#endif
+ /* Deferred means some collisions occurred during transmit,
+ * but we eventually sent the packet OK.
+ */
+ if (bdp->cbd_sc & BD_ENET_TX_DEF)
+ fep->stats.collisions++;
+
+ /* Free the sk buffer associated with this last transmit.
+ */
+#if 0
+printk("TXI: %x %x %x\n", bdp, skb, fep->skb_dirty);
+#endif
+ dev_kfree_skb_irq (skb/*, FREE_WRITE*/);
+ fep->tx_skbuff[fep->skb_dirty] = NULL;
+ fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
+
+ /* Update pointer to next buffer descriptor to be transmitted.
+ */
+ if (bdp->cbd_sc & BD_ENET_TX_WRAP)
+ bdp = fep->tx_bd_base;
+ else
+ bdp++;
+
+ /* Since we have freed up a buffer, the ring is no longer
+ * full.
+ */
+ if (fep->tx_full) {
+ fep->tx_full = 0;
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ }
+#ifdef CONFIG_FEC_PACKETHOOK
+ /* Re-read register. Not exactly guaranteed to be correct,
+ but... */
+ if (fep->ph_regaddr) regval = *fep->ph_regaddr;
+#endif
+ }
+ fep->dirty_tx = (cbd_t *)bdp;
+ spin_unlock(&fep->lock);
+}
+
+
+/* During a receive, the cur_rx points to the current incoming buffer.
+ * When we update through the ring, if the next incoming buffer has
+ * not been given to the system, we just set the empty indicator,
+ * effectively tossing the packet.
+ */
+static void
+#ifdef CONFIG_FEC_PACKETHOOK
+fec_enet_rx(struct net_device *dev, __u32 regval)
+#else
+fec_enet_rx(struct net_device *dev)
+#endif
+{
+ struct fec_enet_private *fep;
+ volatile fec_t *fecp;
+ volatile cbd_t *bdp;
+ struct sk_buff *skb;
+ ushort pkt_len;
+ __u8 *data;
+
+ fep = dev->priv;
+ fecp = (volatile fec_t*)dev->base_addr;
+
+ /* First, grab all of the stats for the incoming packet.
+ * These get messed up if we get called due to a busy condition.
+ */
+ bdp = fep->cur_rx;
+
+while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) {
+
+#ifndef final_version
+ /* Since we have allocated space to hold a complete frame,
+ * the last indicator should be set.
+ */
+ if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0)
+ printk("FEC ENET: rcv is not +last\n");
+#endif
+
+ /* Check for errors. */
+ if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
+ BD_ENET_RX_CR | BD_ENET_RX_OV)) {
+ fep->stats.rx_errors++;
+ if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
+ /* Frame too long or too short. */
+ fep->stats.rx_length_errors++;
+ }
+ if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */
+ fep->stats.rx_frame_errors++;
+ if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */
+ fep->stats.rx_crc_errors++;
+ if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */
+ fep->stats.rx_crc_errors++;
+ }
+
+ /* Report late collisions as a frame error.
+ * On this error, the BD is closed, but we don't know what we
+ * have in the buffer. So, just drop this frame on the floor.
+ */
+ if (bdp->cbd_sc & BD_ENET_RX_CL) {
+ fep->stats.rx_errors++;
+ fep->stats.rx_frame_errors++;
+ goto rx_processing_done;
+ }
+
+ /* Process the incoming frame.
+ */
+ fep->stats.rx_packets++;
+ pkt_len = bdp->cbd_datlen;
+ fep->stats.rx_bytes += pkt_len;
+ data = fep->rx_vaddr[bdp - fep->rx_bd_base];
+
+#ifdef CONFIG_FEC_PACKETHOOK
+ /* Packet hook ... */
+ if (fep->ph_rxhandler) {
+ if (((struct ethhdr *)data)->h_proto == fep->ph_proto) {
+ switch (fep->ph_rxhandler(data, pkt_len, regval,
+ fep->ph_priv)) {
+ case 1:
+ goto rx_processing_done;
+ break;
+ case 0:
+ break;
+ default:
+ fep->stats.rx_errors++;
+ goto rx_processing_done;
+ }
+ }
+ }
+
+ /* If it wasn't filtered - copy it to an sk buffer. */
+#endif
+
+ /* This does 16 byte alignment, exactly what we need.
+ * The packet length includes FCS, but we don't want to
+ * include that when passing upstream as it messes up
+ * bridging applications.
+ */
+ skb = dev_alloc_skb(pkt_len-4);
+
+ if (skb == NULL) {
+ printk("%s: Memory squeeze, dropping packet.\n", dev->name);
+ fep->stats.rx_dropped++;
+ } else {
+ skb->dev = dev;
+ skb_put(skb,pkt_len-4); /* Make room */
+ eth_copy_and_sum(skb, data, pkt_len-4, 0);
+ skb->protocol=eth_type_trans(skb,dev);
+ netif_rx(skb);
+ }
+ rx_processing_done:
+
+ /* Clear the status flags for this buffer.
+ */
+ bdp->cbd_sc &= ~BD_ENET_RX_STATS;
+
+ /* Mark the buffer empty.
+ */
+ bdp->cbd_sc |= BD_ENET_RX_EMPTY;
+
+ /* Update BD pointer to next entry.
+ */
+ if (bdp->cbd_sc & BD_ENET_RX_WRAP)
+ bdp = fep->rx_bd_base;
+ else
+ bdp++;
+
+#if 1
+ /* Doing this here will keep the FEC running while we process
+ * incoming frames. On a heavily loaded network, we should be
+ * able to keep up at the expense of system resources.
+ */
+ fecp->fec_r_des_active = 0x01000000;
+#endif
+#ifdef CONFIG_FEC_PACKETHOOK
+ /* Re-read register. Not exactly guaranteed to be correct,
+ but... */
+ if (fep->ph_regaddr) regval = *fep->ph_regaddr;
+#endif
+ } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */
+ fep->cur_rx = (cbd_t *)bdp;
+
+#if 0
+ /* Doing this here will allow us to process all frames in the
+ * ring before the FEC is allowed to put more there. On a heavily
+ * loaded network, some frames may be lost. Unfortunately, this
+ * increases the interrupt overhead since we can potentially work
+ * our way back to the interrupt return only to come right back
+ * here.
+ */
+ fecp->fec_r_des_active = 0x01000000;
+#endif
+}
+
+
+#ifdef CONFIG_USE_MDIO
+static void
+fec_enet_mii(struct net_device *dev)
+{
+ struct fec_enet_private *fep;
+ volatile fec_t *ep;
+ mii_list_t *mip;
+ uint mii_reg;
+
+ fep = (struct fec_enet_private *)dev->priv;
+ ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec);
+ mii_reg = ep->fec_mii_data;
+
+ if ((mip = mii_head) == NULL) {
+ printk("MII and no head!\n");
+ return;
+ }
+
+ if (mip->mii_func != NULL)
+ (*(mip->mii_func))(mii_reg, dev);
+
+ mii_head = mip->mii_next;
+ mip->mii_next = mii_free;
+ mii_free = mip;
+
+ if ((mip = mii_head) != NULL) {
+ ep->fec_mii_data = mip->mii_regval;
+
+ }
+}
+
+static int
+mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
+{
+ struct fec_enet_private *fep;
+ unsigned long flags;
+ mii_list_t *mip;
+ int retval;
+
+ /* Add PHY address to register command.
+ */
+ fep = dev->priv;
+ regval |= fep->phy_addr << 23;
+
+ retval = 0;
+
+ /* lock while modifying mii_list */
+ spin_lock_irqsave(&fep->lock, flags);
+
+ if ((mip = mii_free) != NULL) {
+ mii_free = mip->mii_next;
+ mip->mii_regval = regval;
+ mip->mii_func = func;
+ mip->mii_next = NULL;
+ if (mii_head) {
+ mii_tail->mii_next = mip;
+ mii_tail = mip;
+ } else {
+ mii_head = mii_tail = mip;
+ (&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec))->fec_mii_data = regval;
+ }
+ } else {
+ retval = 1;
+ }
+
+ spin_unlock_irqrestore(&fep->lock, flags);
+
+ return(retval);
+}
+
+static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
+{
+ int k;
+
+ if(!c)
+ return;
+
+ for(k = 0; (c+k)->mii_data != mk_mii_end; k++)
+ mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
+}
+
+static void mii_parse_sr(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+ volatile uint *s = &(fep->phy_status);
+
+ *s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
+
+ if (mii_reg & 0x0004)
+ *s |= PHY_STAT_LINK;
+ if (mii_reg & 0x0010)
+ *s |= PHY_STAT_FAULT;
+ if (mii_reg & 0x0020)
+ *s |= PHY_STAT_ANC;
+
+ fep->link = (*s & PHY_STAT_LINK) ? 1 : 0;
+}
+
+static void mii_parse_cr(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+ volatile uint *s = &(fep->phy_status);
+
+ *s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP);
+
+ if (mii_reg & 0x1000)
+ *s |= PHY_CONF_ANE;
+ if (mii_reg & 0x4000)
+ *s |= PHY_CONF_LOOP;
+}
+
+static void mii_parse_anar(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+ volatile uint *s = &(fep->phy_status);
+
+ *s &= ~(PHY_CONF_SPMASK);
+
+ if (mii_reg & 0x0020)
+ *s |= PHY_CONF_10HDX;
+ if (mii_reg & 0x0040)
+ *s |= PHY_CONF_10FDX;
+ if (mii_reg & 0x0080)
+ *s |= PHY_CONF_100HDX;
+ if (mii_reg & 0x00100)
+ *s |= PHY_CONF_100FDX;
+}
+#if 0
+static void mii_disp_reg(uint mii_reg, struct net_device *dev)
+{
+ printk("reg %u = 0x%04x\n", (mii_reg >> 18) & 0x1f, mii_reg & 0xffff);
+}
+#endif
+
+/* ------------------------------------------------------------------------- */
+/* The Level one LXT970 is used by many boards */
+
+#ifdef CONFIG_FEC_LXT970
+
+#define MII_LXT970_MIRROR 16 /* Mirror register */
+#define MII_LXT970_IER 17 /* Interrupt Enable Register */
+#define MII_LXT970_ISR 18 /* Interrupt Status Register */
+#define MII_LXT970_CONFIG 19 /* Configuration Register */
+#define MII_LXT970_CSR 20 /* Chip Status Register */
+
+static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+ volatile uint *s = &(fep->phy_status);
+
+ *s &= ~(PHY_STAT_SPMASK);
+
+ if (mii_reg & 0x0800) {
+ if (mii_reg & 0x1000)
+ *s |= PHY_STAT_100FDX;
+ else
+ *s |= PHY_STAT_100HDX;
+ }
+ else {
+ if (mii_reg & 0x1000)
+ *s |= PHY_STAT_10FDX;
+ else
+ *s |= PHY_STAT_10HDX;
+ }
+}
+
+static phy_info_t phy_info_lxt970 = {
+ 0x07810000,
+ "LXT970",
+
+ (const phy_cmd_t []) { /* config */
+#if 0
+// { mk_mii_write(MII_REG_ANAR, 0x0021), NULL },
+
+ /* Set default operation of 100-TX....for some reason
+ * some of these bits are set on power up, which is wrong.
+ */
+ { mk_mii_write(MII_LXT970_CONFIG, 0), NULL },
+#endif
+ { mk_mii_read(MII_REG_CR), mii_parse_cr },
+ { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* startup - enable interrupts */
+ { mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
+ { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* ack_int */
+ /* read SR and ISR to acknowledge */
+
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_LXT970_ISR), NULL },
+
+ /* find out the current status */
+
+ { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* shutdown - disable interrupts */
+ { mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
+ { mk_mii_end, }
+ },
+};
+
+#endif /* CONFIG_FEC_LXT970 */
+
+/* ------------------------------------------------------------------------- */
+/* The Level one LXT971 is used on some of my custom boards */
+
+#ifdef CONFIG_FEC_LXT971
+
+/* register definitions for the 971 */
+
+#define MII_LXT971_PCR 16 /* Port Control Register */
+#define MII_LXT971_SR2 17 /* Status Register 2 */
+#define MII_LXT971_IER 18 /* Interrupt Enable Register */
+#define MII_LXT971_ISR 19 /* Interrupt Status Register */
+#define MII_LXT971_LCR 20 /* LED Control Register */
+#define MII_LXT971_TCR 30 /* Transmit Control Register */
+
+/*
+ * I had some nice ideas of running the MDIO faster...
+ * The 971 should support 8MHz and I tried it, but things acted really
+ * weird, so 2.5 MHz ought to be enough for anyone...
+ */
+
+static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+ volatile uint *s = &(fep->phy_status);
+
+ *s &= ~(PHY_STAT_SPMASK);
+
+ if (mii_reg & 0x4000) {
+ if (mii_reg & 0x0200)
+ *s |= PHY_STAT_100FDX;
+ else
+ *s |= PHY_STAT_100HDX;
+ }
+ else {
+ if (mii_reg & 0x0200)
+ *s |= PHY_STAT_10FDX;
+ else
+ *s |= PHY_STAT_10HDX;
+ }
+ if (mii_reg & 0x0008)
+ *s |= PHY_STAT_FAULT;
+}
+
+static phy_info_t phy_info_lxt971 = {
+ 0x0001378e,
+ "LXT971",
+
+ (const phy_cmd_t []) { /* config */
+// { mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10 Mbps, HD */
+ { mk_mii_read(MII_REG_CR), mii_parse_cr },
+ { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* startup - enable interrupts */
+ { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
+ { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
+
+ /* Somehow does the 971 tell me that the link is down
+ * the first read after power-up.
+ * read here to get a valid value in ack_int */
+
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* ack_int */
+ /* find out the current status */
+
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
+
+ /* we only need to read ISR to acknowledge */
+
+ { mk_mii_read(MII_LXT971_ISR), NULL },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* shutdown - disable interrupts */
+ { mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
+ { mk_mii_end, }
+ },
+};
+
+#endif /* CONFIG_FEC_LXT970 */
+
+
+/* ------------------------------------------------------------------------- */
+/* The Quality Semiconductor QS6612 is used on the RPX CLLF */
+
+#ifdef CONFIG_FEC_QS6612
+
+/* register definitions */
+
+#define MII_QS6612_MCR 17 /* Mode Control Register */
+#define MII_QS6612_FTR 27 /* Factory Test Register */
+#define MII_QS6612_MCO 28 /* Misc. Control Register */
+#define MII_QS6612_ISR 29 /* Interrupt Source Register */
+#define MII_QS6612_IMR 30 /* Interrupt Mask Register */
+#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */
+
+static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+ volatile uint *s = &(fep->phy_status);
+
+ *s &= ~(PHY_STAT_SPMASK);
+
+ switch((mii_reg >> 2) & 7) {
+ case 1: *s |= PHY_STAT_10HDX; break;
+ case 2: *s |= PHY_STAT_100HDX; break;
+ case 5: *s |= PHY_STAT_10FDX; break;
+ case 6: *s |= PHY_STAT_100FDX; break;
+ }
+}
+
+static phy_info_t phy_info_qs6612 = {
+ 0x00181440,
+ "QS6612",
+
+ (const phy_cmd_t []) { /* config */
+// { mk_mii_write(MII_REG_ANAR, 0x061), NULL }, /* 10 Mbps */
+
+ /* The PHY powers up isolated on the RPX,
+ * so send a command to allow operation.
+ */
+
+ { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
+
+ /* parse cr and anar to get some info */
+
+ { mk_mii_read(MII_REG_CR), mii_parse_cr },
+ { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* startup - enable interrupts */
+ { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
+ { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* ack_int */
+
+ /* we need to read ISR, SR and ANER to acknowledge */
+
+ { mk_mii_read(MII_QS6612_ISR), NULL },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_ANER), NULL },
+
+ /* read pcr to get info */
+
+ { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* shutdown - disable interrupts */
+ { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
+ { mk_mii_end, }
+ },
+};
+
+#endif /* CONFIG_FEC_QS6612 */
+
+/* ------------------------------------------------------------------------- */
+/* The Advanced Micro Devices AM79C874 is used on the ICU862 */
+
+#ifdef CONFIG_FEC_AM79C874
+
+/* register definitions for the 79C874 */
+
+#define MII_AM79C874_MFR 16 /* Miscellaneous Features Register */
+#define MII_AM79C874_ICSR 17 /* Interrupt Control/Status Register */
+#define MII_AM79C874_DR 18 /* Diagnostic Register */
+#define MII_AM79C874_PMLR 19 /* Power Management & Loopback Register */
+#define MII_AM79C874_MCR 21 /* Mode Control Register */
+#define MII_AM79C874_DC 23 /* Disconnect Counter */
+#define MII_AM79C874_REC 24 /* Receiver Error Counter */
+
+static void mii_parse_amd79c874_dr(uint mii_reg, struct net_device *dev, uint data)
+{
+ volatile struct fec_enet_private *fep = dev->priv;
+ uint s = fep->phy_status;
+
+ s &= ~(PHY_STAT_SPMASK);
+
+ /* Register 18: Bit 10 is data rate, 11 is Duplex */
+ switch ((mii_reg >> 10) & 3) {
+ case 0: s |= PHY_STAT_10HDX; break;
+ case 1: s |= PHY_STAT_100HDX; break;
+ case 2: s |= PHY_STAT_10FDX; break;
+ case 3: s |= PHY_STAT_100FDX; break;
+ }
+
+ fep->phy_status = s;
+}
+
+static phy_info_t phy_info_amd79c874 = {
+ 0x00022561,
+ "AM79C874",
+
+ (const phy_cmd_t []) { /* config */
+// { mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10 Mbps, HD */
+ { mk_mii_read(MII_REG_CR), mii_parse_cr },
+ { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* startup - enable interrupts */
+ { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
+ { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* ack_int */
+ /* find out the current status */
+
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_AM79C874_DR), mii_parse_amd79c874_dr },
+
+ /* we only need to read ICSR to acknowledge */
+
+ { mk_mii_read(MII_AM79C874_ICSR), NULL },
+ { mk_mii_end, }
+ },
+ (const phy_cmd_t []) { /* shutdown - disable interrupts */
+ { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL },
+ { mk_mii_end, }
+ },
+};
+
+#endif /* CONFIG_FEC_AM79C874 */
+
+static phy_info_t *phy_info[] = {
+
+#ifdef CONFIG_FEC_LXT970
+ &phy_info_lxt970,
+#endif /* CONFIG_FEC_LXT970 */
+
+#ifdef CONFIG_FEC_LXT971
+ &phy_info_lxt971,
+#endif /* CONFIG_FEC_LXT971 */
+
+#ifdef CONFIG_FEC_QS6612
+ &phy_info_qs6612,
+#endif /* CONFIG_FEC_QS6612 */
+
+#ifdef CONFIG_FEC_AM79C874
+ &phy_info_amd79c874,
+#endif /* CONFIG_FEC_AM79C874 */
+
+ NULL
+};
+
+static void mii_display_status(struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+ volatile uint *s = &(fep->phy_status);
+
+ if (!fep->link && !fep->old_link) {
+ /* Link is still down - don't print anything */
+ return;
+ }
+
+ printk("%s: status: ", dev->name);
+
+ if (!fep->link) {
+ printk("link down");
+ } else {
+ printk("link up");
+
+ switch(*s & PHY_STAT_SPMASK) {
+ case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break;
+ case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break;
+ case PHY_STAT_10FDX: printk(", 10 Mbps Full Duplex"); break;
+ case PHY_STAT_10HDX: printk(", 10 Mbps Half Duplex"); break;
+ default:
+ printk(", Unknown speed/duplex");
+ }
+
+ if (*s & PHY_STAT_ANC)
+ printk(", auto-negotiation complete");
+ }
+
+ if (*s & PHY_STAT_FAULT)
+ printk(", remote fault");
+
+ printk(".\n");
+}
+
+static void mii_display_config(struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+ volatile uint *s = &(fep->phy_status);
+
+ printk("%s: config: auto-negotiation ", dev->name);
+
+ if (*s & PHY_CONF_ANE)
+ printk("on");
+ else
+ printk("off");
+
+ if (*s & PHY_CONF_100FDX)
+ printk(", 100FDX");
+ if (*s & PHY_CONF_100HDX)
+ printk(", 100HDX");
+ if (*s & PHY_CONF_10FDX)
+ printk(", 10FDX");
+ if (*s & PHY_CONF_10HDX)
+ printk(", 10HDX");
+ if (!(*s & PHY_CONF_SPMASK))
+ printk(", No speed/duplex selected?");
+
+ if (*s & PHY_CONF_LOOP)
+ printk(", loopback enabled");
+
+ printk(".\n");
+
+ fep->sequence_done = 1;
+}
+
+static void mii_relink(struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+ int duplex;
+
+ fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
+ mii_display_status(dev);
+ fep->old_link = fep->link;
+
+ if (fep->link) {
+ duplex = 0;
+ if (fep->phy_status
+ & (PHY_STAT_100FDX | PHY_STAT_10FDX))
+ duplex = 1;
+ fec_restart(dev, duplex);
+ }
+ else
+ fec_stop(dev);
+
+#if 0
+ enable_irq(fep->mii_irq);
+#endif
+
+}
+
+static void mii_queue_relink(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+
+ fep->phy_task.routine = (void *)mii_relink;
+ fep->phy_task.data = dev;
+ schedule_task(&fep->phy_task);
+}
+
+static void mii_queue_config(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+
+ fep->phy_task.routine = (void *)mii_display_config;
+ fep->phy_task.data = dev;
+ schedule_task(&fep->phy_task);
+}
+
+
+
+phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_REG_CR), mii_queue_relink },
+ { mk_mii_end, } };
+phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_REG_CR), mii_queue_config },
+ { mk_mii_end, } };
+
+
+
+/* Read remainder of PHY ID.
+*/
+static void
+mii_discover_phy3(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep;
+ int i;
+
+ fep = dev->priv;
+ fep->phy_id |= (mii_reg & 0xffff);
+
+ for(i = 0; phy_info[i]; i++)
+ if(phy_info[i]->id == (fep->phy_id >> 4))
+ break;
+
+ if(!phy_info[i])
+ panic("%s: PHY id 0x%08x is not supported!\n",
+ dev->name, fep->phy_id);
+
+ fep->phy = phy_info[i];
+ fep->phy_id_done = 1;
+
+ printk("%s: Phy @ 0x%x, type %s (0x%08x)\n",
+ dev->name, fep->phy_addr, fep->phy->name, fep->phy_id);
+}
+
+/* Scan all of the MII PHY addresses looking for someone to respond
+ * with a valid ID. This usually happens quickly.
+ */
+static void
+mii_discover_phy(uint mii_reg, struct net_device *dev)
+{
+ struct fec_enet_private *fep;
+ uint phytype;
+
+ fep = dev->priv;
+
+ if ((phytype = (mii_reg & 0xffff)) != 0xffff) {
+
+ /* Got first part of ID, now get remainder.
+ */
+ fep->phy_id = phytype << 16;
+ mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), mii_discover_phy3);
+ } else {
+ fep->phy_addr++;
+ if (fep->phy_addr < 32) {
+ mii_queue(dev, mk_mii_read(MII_REG_PHYIR1),
+ mii_discover_phy);
+ } else {
+ printk("fec: No PHY device found.\n");
+ }
+ }
+}
+#endif /* CONFIG_USE_MDIO */
+
+/* This interrupt occurs when the PHY detects a link change.
+*/
+static void
+#ifdef CONFIG_RPXCLASSIC
+mii_link_interrupt(void *dev_id)
+#else
+mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+#endif
+{
+#ifdef CONFIG_USE_MDIO
+ struct net_device *dev = dev_id;
+ struct fec_enet_private *fep = dev->priv;
+ volatile immap_t *immap = (immap_t *)IMAP_ADDR;
+ volatile fec_t *fecp = &(immap->im_cpm.cp_fec);
+ unsigned int ecntrl = fecp->fec_ecntrl;
+
+ /* We need the FEC enabled to access the MII
+ */
+ if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) {
+ fecp->fec_ecntrl |= FEC_ECNTRL_ETHER_EN;
+ }
+#endif /* CONFIG_USE_MDIO */
+
+#if 0
+ disable_irq(fep->mii_irq); /* disable now, enable later */
+#endif
+
+
+#ifdef CONFIG_USE_MDIO
+ mii_do_cmd(dev, fep->phy->ack_int);
+ mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */
+
+ if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) {
+ fecp->fec_ecntrl = ecntrl; /* restore old settings */
+ }
+#else
+printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__);
+#endif /* CONFIG_USE_MDIO */
+
+}
+
+static int
+fec_enet_open(struct net_device *dev)
+{
+ struct fec_enet_private *fep = dev->priv;
+
+ /* I should reset the ring buffers here, but I don't yet know
+ * a simple way to do that.
+ */
+
+#ifdef CONFIG_USE_MDIO
+ fep->sequence_done = 0;
+ fep->link = 0;
+
+ if (fep->phy) {
+ mii_do_cmd(dev, fep->phy->ack_int);
+ mii_do_cmd(dev, fep->phy->config);
+ mii_do_cmd(dev, phy_cmd_config); /* display configuration */
+ while(!fep->sequence_done)
+ schedule();
+
+ mii_do_cmd(dev, fep->phy->startup);
+ netif_start_queue(dev);
+ return 0; /* Success */
+ }
+ return -ENODEV; /* No PHY we understand */
+#else
+ fep->link = 1;
+ netif_start_queue(dev);
+ return 0; /* Success */
+#endif /* CONFIG_USE_MDIO */
+
+}
+
+static int
+fec_enet_close(struct net_device *dev)
+{
+ /* Don't know what to do yet.
+ */
+ netif_stop_queue(dev);
+ fec_stop(dev);
+
+ return 0;
+}
+
+static struct net_device_stats *fec_enet_get_stats(struct net_device *dev)
+{
+ struct fec_enet_private *fep = (struct fec_enet_private *)dev->priv;
+
+ return &fep->stats;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ * Skeleton taken from sunlance driver.
+ * The CPM Ethernet implementation allows Multicast as well as individual
+ * MAC address filtering. Some of the drivers check to make sure it is
+ * a group multicast address, and discard those that are not. I guess I
+ * will do the same for now, but just remove the test if you want
+ * individual filtering as well (do the upper net layers want or support
+ * this kind of feature?).
+ */
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct fec_enet_private *fep;
+ volatile fec_t *ep;
+
+ fep = (struct fec_enet_private *)dev->priv;
+ ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec);
+
+ if (dev->flags&IFF_PROMISC) {
+
+ /* Log any net taps. */
+ printk("%s: Promiscuous mode enabled.\n", dev->name);
+ ep->fec_r_cntrl |= FEC_RCNTRL_PROM;
+ } else {
+
+ ep->fec_r_cntrl &= ~FEC_RCNTRL_PROM;
+
+ if (dev->flags & IFF_ALLMULTI) {
+ /* Catch all multicast addresses, so set the
+ * filter to all 1's.
+ */
+ ep->fec_hash_table_high = 0xffffffff;
+ ep->fec_hash_table_low = 0xffffffff;
+ }
+#if 0
+ else {
+ /* Clear filter and add the addresses in the list.
+ */
+ ep->sen_gaddr1 = 0;
+ ep->sen_gaddr2 = 0;
+ ep->sen_gaddr3 = 0;
+ ep->sen_gaddr4 = 0;
+
+ dmi = dev->mc_list;
+
+ for (i=0; i<dev->mc_count; i++) {
+
+ /* Only support group multicast for now.
+ */
+ if (!(dmi->dmi_addr[0] & 1))
+ continue;
+
+ /* The address in dmi_addr is LSB first,
+ * and taddr is MSB first. We have to
+ * copy bytes MSB first from dmi_addr.
+ */
+ mcptr = (u_char *)dmi->dmi_addr + 5;
+ tdptr = (u_char *)&ep->sen_taddrh;
+ for (j=0; j<6; j++)
+ *tdptr++ = *mcptr--;
+
+ /* Ask CPM to run CRC and set bit in
+ * filter mask.
+ */
+ cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC1, CPM_CR_SET_GADDR) | CPM_CR_FLG;
+ /* this delay is necessary here -- Cort */
+ udelay(10);
+ while (cpmp->cp_cpcr & CPM_CR_FLG);
+ }
+ }
+#endif
+ }
+}
+
+/* Initialize the FEC Ethernet on 860T.
+ */
+static int __init fec_enet_init(void)
+{
+ struct net_device *dev;
+ struct fec_enet_private *fep;
+ int i, j, k, err;
+ unsigned char *eap, *iap, *ba;
+ unsigned long mem_addr;
+ volatile cbd_t *bdp;
+ cbd_t *cbd_base;
+ volatile immap_t *immap;
+ volatile fec_t *fecp;
+ bd_t *bd;
+#ifdef CONFIG_SCC_ENET
+ unsigned char tmpaddr[6];
+#endif
+
+ immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */
+
+ bd = (bd_t *)__res;
+
+ dev = alloc_etherdev(sizeof(*fep));
+ if (!dev)
+ return -ENOMEM;
+
+ fep = dev->priv;
+
+ fecp = &(immap->im_cpm.cp_fec);
+
+ /* Whack a reset. We should wait for this.
+ */
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
+ for (i = 0;
+ (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+ ++i) {
+ udelay(1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printk ("FEC Reset timeout!\n");
+ }
+
+ /* Set the Ethernet address. If using multiple Enets on the 8xx,
+ * this needs some work to get unique addresses.
+ */
+ eap = (unsigned char *)my_enet_addr;
+ iap = bd->bi_enetaddr;
+
+#ifdef CONFIG_SCC_ENET
+ /*
+ * If a board has Ethernet configured both on a SCC and the
+ * FEC, it needs (at least) 2 MAC addresses (we know that Sun
+ * disagrees, but anyway). For the FEC port, we create
+ * another address by setting one of the address bits above
+ * something that would have (up to now) been allocated.
+ */
+ for (i=0; i<6; i++)
+ tmpaddr[i] = *iap++;
+ tmpaddr[3] |= 0x80;
+ iap = tmpaddr;
+#endif
+
+ for (i=0; i<6; i++) {
+ dev->dev_addr[i] = *eap++ = *iap++;
+ }
+
+ /* Allocate memory for buffer descriptors.
+ */
+ if (((RX_RING_SIZE + TX_RING_SIZE) * sizeof(cbd_t)) > PAGE_SIZE) {
+ printk("FEC init error. Need more space.\n");
+ printk("FEC initialization failed.\n");
+ return 1;
+ }
+ cbd_base = (cbd_t *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr);
+
+ /* Set receive and transmit descriptor base.
+ */
+ fep->rx_bd_base = cbd_base;
+ fep->tx_bd_base = cbd_base + RX_RING_SIZE;
+
+ fep->skb_cur = fep->skb_dirty = 0;
+
+ /* Initialize the receive buffer descriptors.
+ */
+ bdp = fep->rx_bd_base;
+ k = 0;
+ for (i=0; i<FEC_ENET_RX_PAGES; i++) {
+
+ /* Allocate a page.
+ */
+ ba = (unsigned char *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr);
+ /* BUG: no check for failure */
+
+ /* Initialize the BD for every fragment in the page.
+ */
+ for (j=0; j<FEC_ENET_RX_FRPPG; j++) {
+ bdp->cbd_sc = BD_ENET_RX_EMPTY;
+ bdp->cbd_bufaddr = mem_addr;
+ fep->rx_vaddr[k++] = ba;
+ mem_addr += FEC_ENET_RX_FRSIZE;
+ ba += FEC_ENET_RX_FRSIZE;
+ bdp++;
+ }
+ }
+
+ /* Set the last buffer to wrap.
+ */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+#ifdef CONFIG_FEC_PACKETHOOK
+ fep->ph_lock = 0;
+ fep->ph_rxhandler = fep->ph_txhandler = NULL;
+ fep->ph_proto = 0;
+ fep->ph_regaddr = NULL;
+ fep->ph_priv = NULL;
+#endif
+
+ /* Install our interrupt handler.
+ */
+ if (request_irq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0)
+ panic("Could not allocate FEC IRQ!");
+
+#ifdef CONFIG_RPXCLASSIC
+ /* Make Port C, bit 15 an input that causes interrupts.
+ */
+ immap->im_ioport.iop_pcpar &= ~0x0001;
+ immap->im_ioport.iop_pcdir &= ~0x0001;
+ immap->im_ioport.iop_pcso &= ~0x0001;
+ immap->im_ioport.iop_pcint |= 0x0001;
+ cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev);
+
+ /* Make LEDS reflect Link status.
+ */
+ *((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE;
+#endif
+
+#ifdef PHY_INTERRUPT
+ ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |=
+ (0x80000000 >> PHY_INTERRUPT);
+
+ if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, "mii", dev) != 0)
+ panic("Could not allocate MII IRQ!");
+#endif
+
+ dev->base_addr = (unsigned long)fecp;
+
+ /* The FEC Ethernet specific entries in the device structure. */
+ dev->open = fec_enet_open;
+ dev->hard_start_xmit = fec_enet_start_xmit;
+ dev->tx_timeout = fec_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->stop = fec_enet_close;
+ dev->get_stats = fec_enet_get_stats;
+ dev->set_multicast_list = set_multicast_list;
+
+#ifdef CONFIG_USE_MDIO
+ for (i=0; i<NMII-1; i++)
+ mii_cmds[i].mii_next = &mii_cmds[i+1];
+ mii_free = mii_cmds;
+#endif /* CONFIG_USE_MDIO */
+
+ /* Configure all of port D for MII.
+ */
+ immap->im_ioport.iop_pdpar = 0x1fff;
+
+ /* Bits moved from Rev. D onward.
+ */
+ if ((mfspr(SPRN_IMMR) & 0xffff) < 0x0501)
+ immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
+ else
+ immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
+
+#ifdef CONFIG_USE_MDIO
+ /* Set MII speed to 2.5 MHz
+ */
+ fecp->fec_mii_speed = fep->phy_speed =
+ (( (bd->bi_intfreq + 500000) / 2500000 / 2 ) & 0x3F ) << 1;
+#else
+ fecp->fec_mii_speed = 0; /* turn off MDIO */
+#endif /* CONFIG_USE_MDIO */
+
+ err = register_netdev(dev);
+ if (err) {
+ free_netdev(dev);
+ return err;
+ }
+
+ printk ("%s: FEC ENET Version 0.2, FEC irq %d"
+#ifdef PHY_INTERRUPT
+ ", MII irq %d"
+#endif
+ ", addr ",
+ dev->name, FEC_INTERRUPT
+#ifdef PHY_INTERRUPT
+ , PHY_INTERRUPT
+#endif
+ );
+ for (i=0; i<6; i++)
+ printk("%02x%c", dev->dev_addr[i], (i==5) ? '\n' : ':');
+
+#ifdef CONFIG_USE_MDIO /* start in full duplex mode, and negotiate speed */
+ fec_restart (dev, 1);
+#else /* always use half duplex mode only */
+ fec_restart (dev, 0);
+#endif
+
+#ifdef CONFIG_USE_MDIO
+ /* Queue up command to detect the PHY and initialize the
+ * remainder of the interface.
+ */
+ fep->phy_id_done = 0;
+ fep->phy_addr = 0;
+ mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
+#endif /* CONFIG_USE_MDIO */
+
+ return 0;
+}
+module_init(fec_enet_init);
+
+/* This function is called to start or restart the FEC during a link
+ * change. This only happens when switching between half and full
+ * duplex.
+ */
+static void
+fec_restart(struct net_device *dev, int duplex)
+{
+ struct fec_enet_private *fep;
+ int i;
+ volatile cbd_t *bdp;
+ volatile immap_t *immap;
+ volatile fec_t *fecp;
+
+ immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */
+
+ fecp = &(immap->im_cpm.cp_fec);
+
+ fep = dev->priv;
+
+ /* Whack a reset. We should wait for this.
+ */
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
+ for (i = 0;
+ (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+ ++i) {
+ udelay(1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printk ("FEC Reset timeout!\n");
+ }
+
+ /* Set station address.
+ */
+ fecp->fec_addr_low = (my_enet_addr[0] << 16) | my_enet_addr[1];
+ fecp->fec_addr_high = my_enet_addr[2];
+
+ /* Reset all multicast.
+ */
+ fecp->fec_hash_table_high = 0;
+ fecp->fec_hash_table_low = 0;
+
+ /* Set maximum receive buffer size.
+ */
+ fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
+ fecp->fec_r_hash = PKT_MAXBUF_SIZE;
+
+ /* Set receive and transmit descriptor base.
+ */
+ fecp->fec_r_des_start = iopa((uint)(fep->rx_bd_base));
+ fecp->fec_x_des_start = iopa((uint)(fep->tx_bd_base));
+
+ fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
+ fep->cur_rx = fep->rx_bd_base;
+
+ /* Reset SKB transmit buffers.
+ */
+ fep->skb_cur = fep->skb_dirty = 0;
+ for (i=0; i<=TX_RING_MOD_MASK; i++) {
+ if (fep->tx_skbuff[i] != NULL) {
+ dev_kfree_skb(fep->tx_skbuff[i]);
+ fep->tx_skbuff[i] = NULL;
+ }
+ }
+
+ /* Initialize the receive buffer descriptors.
+ */
+ bdp = fep->rx_bd_base;
+ for (i=0; i<RX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page.
+ */
+ bdp->cbd_sc = BD_ENET_RX_EMPTY;
+ bdp++;
+ }
+
+ /* Set the last buffer to wrap.
+ */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ /* ...and the same for transmmit.
+ */
+ bdp = fep->tx_bd_base;
+ for (i=0; i<TX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page.
+ */
+ bdp->cbd_sc = 0;
+ bdp->cbd_bufaddr = 0;
+ bdp++;
+ }
+
+ /* Set the last buffer to wrap.
+ */
+ bdp--;
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ /* Enable MII mode.
+ */
+ if (duplex) {
+ fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; /* MII enable */
+ fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; /* FD enable */
+ }
+ else {
+ fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
+ fecp->fec_x_cntrl = 0;
+ }
+ fep->full_duplex = duplex;
+
+ /* Enable big endian and don't care about SDMA FC.
+ */
+ fecp->fec_fun_code = 0x78000000;
+
+#ifdef CONFIG_USE_MDIO
+ /* Set MII speed.
+ */
+ fecp->fec_mii_speed = fep->phy_speed;
+#endif /* CONFIG_USE_MDIO */
+
+ /* Clear any outstanding interrupt.
+ */
+ fecp->fec_ievent = 0xffc0;
+
+ fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
+
+ /* Enable interrupts we wish to service.
+ */
+ fecp->fec_imask = ( FEC_ENET_TXF | FEC_ENET_TXB |
+ FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII );
+
+ /* And last, enable the transmit and receive processing.
+ */
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
+ fecp->fec_r_des_active = 0x01000000;
+}
+
+static void
+fec_stop(struct net_device *dev)
+{
+ volatile immap_t *immap;
+ volatile fec_t *fecp;
+ struct fec_enet_private *fep;
+ int i;
+
+ immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */
+
+ fecp = &(immap->im_cpm.cp_fec);
+
+ if ((fecp->fec_ecntrl & FEC_ECNTRL_ETHER_EN) == 0)
+ return; /* already down */
+
+ fep = dev->priv;
+
+
+ fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */
+
+ for (i = 0;
+ ((fecp->fec_ievent & 0x10000000) == 0) && (i < FEC_RESET_DELAY);
+ ++i) {
+ udelay(1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printk ("FEC timeout on graceful transmit stop\n");
+ }
+
+ /* Clear outstanding MII command interrupts.
+ */
+ fecp->fec_ievent = FEC_ENET_MII;
+
+ /* Enable MII command finished interrupt
+ */
+ fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
+ fecp->fec_imask = FEC_ENET_MII;
+
+#ifdef CONFIG_USE_MDIO
+ /* Set MII speed.
+ */
+ fecp->fec_mii_speed = fep->phy_speed;
+#endif /* CONFIG_USE_MDIO */
+
+ /* Disable FEC
+ */
+ fecp->fec_ecntrl &= ~(FEC_ECNTRL_ETHER_EN);
+}
diff --git a/arch/ppc/8xx_io/micropatch.c b/arch/ppc/8xx_io/micropatch.c
new file mode 100644
index 000000000000..312af0776c31
--- /dev/null
+++ b/arch/ppc/8xx_io/micropatch.c
@@ -0,0 +1,744 @@
+
+/* Microcode patches for the CPM as supplied by Motorola.
+ * This is the one for IIC/SPI. There is a newer one that
+ * also relocates SMC2, but this would require additional changes
+ * to uart.c, so I am holding off on that for a moment.
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/mpc8xx.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/8xx_immap.h>
+#include <asm/commproc.h>
+
+/*
+ * I2C/SPI relocation patch arrays.
+ */
+
+#ifdef CONFIG_I2C_SPI_UCODE_PATCH
+
+uint patch_2000[] = {
+ 0x7FFFEFD9,
+ 0x3FFD0000,
+ 0x7FFB49F7,
+ 0x7FF90000,
+ 0x5FEFADF7,
+ 0x5F89ADF7,
+ 0x5FEFAFF7,
+ 0x5F89AFF7,
+ 0x3A9CFBC8,
+ 0xE7C0EDF0,
+ 0x77C1E1BB,
+ 0xF4DC7F1D,
+ 0xABAD932F,
+ 0x4E08FDCF,
+ 0x6E0FAFF8,
+ 0x7CCF76CF,
+ 0xFD1FF9CF,
+ 0xABF88DC6,
+ 0xAB5679F7,
+ 0xB0937383,
+ 0xDFCE79F7,
+ 0xB091E6BB,
+ 0xE5BBE74F,
+ 0xB3FA6F0F,
+ 0x6FFB76CE,
+ 0xEE0DF9CF,
+ 0x2BFBEFEF,
+ 0xCFEEF9CF,
+ 0x76CEAD24,
+ 0x90B2DF9A,
+ 0x7FDDD0BF,
+ 0x4BF847FD,
+ 0x7CCF76CE,
+ 0xCFEF7E1F,
+ 0x7F1D7DFD,
+ 0xF0B6EF71,
+ 0x7FC177C1,
+ 0xFBC86079,
+ 0xE722FBC8,
+ 0x5FFFDFFF,
+ 0x5FB2FFFB,
+ 0xFBC8F3C8,
+ 0x94A67F01,
+ 0x7F1D5F39,
+ 0xAFE85F5E,
+ 0xFFDFDF96,
+ 0xCB9FAF7D,
+ 0x5FC1AFED,
+ 0x8C1C5FC1,
+ 0xAFDD5FC3,
+ 0xDF9A7EFD,
+ 0xB0B25FB2,
+ 0xFFFEABAD,
+ 0x5FB2FFFE,
+ 0x5FCE600B,
+ 0xE6BB600B,
+ 0x5FCEDFC6,
+ 0x27FBEFDF,
+ 0x5FC8CFDE,
+ 0x3A9CE7C0,
+ 0xEDF0F3C8,
+ 0x7F0154CD,
+ 0x7F1D2D3D,
+ 0x363A7570,
+ 0x7E0AF1CE,
+ 0x37EF2E68,
+ 0x7FEE10EC,
+ 0xADF8EFDE,
+ 0xCFEAE52F,
+ 0x7D0FE12B,
+ 0xF1CE5F65,
+ 0x7E0A4DF8,
+ 0xCFEA5F72,
+ 0x7D0BEFEE,
+ 0xCFEA5F74,
+ 0xE522EFDE,
+ 0x5F74CFDA,
+ 0x0B627385,
+ 0xDF627E0A,
+ 0x30D8145B,
+ 0xBFFFF3C8,
+ 0x5FFFDFFF,
+ 0xA7F85F5E,
+ 0xBFFE7F7D,
+ 0x10D31450,
+ 0x5F36BFFF,
+ 0xAF785F5E,
+ 0xBFFDA7F8,
+ 0x5F36BFFE,
+ 0x77FD30C0,
+ 0x4E08FDCF,
+ 0xE5FF6E0F,
+ 0xAFF87E1F,
+ 0x7E0FFD1F,
+ 0xF1CF5F1B,
+ 0xABF80D5E,
+ 0x5F5EFFEF,
+ 0x79F730A2,
+ 0xAFDD5F34,
+ 0x47F85F34,
+ 0xAFED7FDD,
+ 0x50B24978,
+ 0x47FD7F1D,
+ 0x7DFD70AD,
+ 0xEF717EC1,
+ 0x6BA47F01,
+ 0x2D267EFD,
+ 0x30DE5F5E,
+ 0xFFFD5F5E,
+ 0xFFEF5F5E,
+ 0xFFDF0CA0,
+ 0xAFED0A9E,
+ 0xAFDD0C3A,
+ 0x5F3AAFBD,
+ 0x7FBDB082,
+ 0x5F8247F8
+};
+
+uint patch_2f00[] = {
+ 0x3E303430,
+ 0x34343737,
+ 0xABF7BF9B,
+ 0x994B4FBD,
+ 0xBD599493,
+ 0x349FFF37,
+ 0xFB9B177D,
+ 0xD9936956,
+ 0xBBFDD697,
+ 0xBDD2FD11,
+ 0x31DB9BB3,
+ 0x63139637,
+ 0x93733693,
+ 0x193137F7,
+ 0x331737AF,
+ 0x7BB9B999,
+ 0xBB197957,
+ 0x7FDFD3D5,
+ 0x73B773F7,
+ 0x37933B99,
+ 0x1D115316,
+ 0x99315315,
+ 0x31694BF4,
+ 0xFBDBD359,
+ 0x31497353,
+ 0x76956D69,
+ 0x7B9D9693,
+ 0x13131979,
+ 0x79376935
+};
+#endif
+
+/*
+ * I2C/SPI/SMC1 relocation patch arrays.
+ */
+
+#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
+
+uint patch_2000[] = {
+ 0x3fff0000,
+ 0x3ffd0000,
+ 0x3ffb0000,
+ 0x3ff90000,
+ 0x5f13eff8,
+ 0x5eb5eff8,
+ 0x5f88adf7,
+ 0x5fefadf7,
+ 0x3a9cfbc8,
+ 0x77cae1bb,
+ 0xf4de7fad,
+ 0xabae9330,
+ 0x4e08fdcf,
+ 0x6e0faff8,
+ 0x7ccf76cf,
+ 0xfdaff9cf,
+ 0xabf88dc8,
+ 0xab5879f7,
+ 0xb0925d8d,
+ 0xdfd079f7,
+ 0xb090e6bb,
+ 0xe5bbe74f,
+ 0x9e046f0f,
+ 0x6ffb76ce,
+ 0xee0cf9cf,
+ 0x2bfbefef,
+ 0xcfeef9cf,
+ 0x76cead23,
+ 0x90b3df99,
+ 0x7fddd0c1,
+ 0x4bf847fd,
+ 0x7ccf76ce,
+ 0xcfef77ca,
+ 0x7eaf7fad,
+ 0x7dfdf0b7,
+ 0xef7a7fca,
+ 0x77cafbc8,
+ 0x6079e722,
+ 0xfbc85fff,
+ 0xdfff5fb3,
+ 0xfffbfbc8,
+ 0xf3c894a5,
+ 0xe7c9edf9,
+ 0x7f9a7fad,
+ 0x5f36afe8,
+ 0x5f5bffdf,
+ 0xdf95cb9e,
+ 0xaf7d5fc3,
+ 0xafed8c1b,
+ 0x5fc3afdd,
+ 0x5fc5df99,
+ 0x7efdb0b3,
+ 0x5fb3fffe,
+ 0xabae5fb3,
+ 0xfffe5fd0,
+ 0x600be6bb,
+ 0x600b5fd0,
+ 0xdfc827fb,
+ 0xefdf5fca,
+ 0xcfde3a9c,
+ 0xe7c9edf9,
+ 0xf3c87f9e,
+ 0x54ca7fed,
+ 0x2d3a3637,
+ 0x756f7e9a,
+ 0xf1ce37ef,
+ 0x2e677fee,
+ 0x10ebadf8,
+ 0xefdecfea,
+ 0xe52f7d9f,
+ 0xe12bf1ce,
+ 0x5f647e9a,
+ 0x4df8cfea,
+ 0x5f717d9b,
+ 0xefeecfea,
+ 0x5f73e522,
+ 0xefde5f73,
+ 0xcfda0b61,
+ 0x5d8fdf61,
+ 0xe7c9edf9,
+ 0x7e9a30d5,
+ 0x1458bfff,
+ 0xf3c85fff,
+ 0xdfffa7f8,
+ 0x5f5bbffe,
+ 0x7f7d10d0,
+ 0x144d5f33,
+ 0xbfffaf78,
+ 0x5f5bbffd,
+ 0xa7f85f33,
+ 0xbffe77fd,
+ 0x30bd4e08,
+ 0xfdcfe5ff,
+ 0x6e0faff8,
+ 0x7eef7e9f,
+ 0xfdeff1cf,
+ 0x5f17abf8,
+ 0x0d5b5f5b,
+ 0xffef79f7,
+ 0x309eafdd,
+ 0x5f3147f8,
+ 0x5f31afed,
+ 0x7fdd50af,
+ 0x497847fd,
+ 0x7f9e7fed,
+ 0x7dfd70a9,
+ 0xef7e7ece,
+ 0x6ba07f9e,
+ 0x2d227efd,
+ 0x30db5f5b,
+ 0xfffd5f5b,
+ 0xffef5f5b,
+ 0xffdf0c9c,
+ 0xafed0a9a,
+ 0xafdd0c37,
+ 0x5f37afbd,
+ 0x7fbdb081,
+ 0x5f8147f8,
+ 0x3a11e710,
+ 0xedf0ccdd,
+ 0xf3186d0a,
+ 0x7f0e5f06,
+ 0x7fedbb38,
+ 0x3afe7468,
+ 0x7fedf4fc,
+ 0x8ffbb951,
+ 0xb85f77fd,
+ 0xb0df5ddd,
+ 0xdefe7fed,
+ 0x90e1e74d,
+ 0x6f0dcbf7,
+ 0xe7decfed,
+ 0xcb74cfed,
+ 0xcfeddf6d,
+ 0x91714f74,
+ 0x5dd2deef,
+ 0x9e04e7df,
+ 0xefbb6ffb,
+ 0xe7ef7f0e,
+ 0x9e097fed,
+ 0xebdbeffa,
+ 0xeb54affb,
+ 0x7fea90d7,
+ 0x7e0cf0c3,
+ 0xbffff318,
+ 0x5fffdfff,
+ 0xac59efea,
+ 0x7fce1ee5,
+ 0xe2ff5ee1,
+ 0xaffbe2ff,
+ 0x5ee3affb,
+ 0xf9cc7d0f,
+ 0xaef8770f,
+ 0x7d0fb0c6,
+ 0xeffbbfff,
+ 0xcfef5ede,
+ 0x7d0fbfff,
+ 0x5ede4cf8,
+ 0x7fddd0bf,
+ 0x49f847fd,
+ 0x7efdf0bb,
+ 0x7fedfffd,
+ 0x7dfdf0b7,
+ 0xef7e7e1e,
+ 0x5ede7f0e,
+ 0x3a11e710,
+ 0xedf0ccab,
+ 0xfb18ad2e,
+ 0x1ea9bbb8,
+ 0x74283b7e,
+ 0x73c2e4bb,
+ 0x2ada4fb8,
+ 0xdc21e4bb,
+ 0xb2a1ffbf,
+ 0x5e2c43f8,
+ 0xfc87e1bb,
+ 0xe74ffd91,
+ 0x6f0f4fe8,
+ 0xc7ba32e2,
+ 0xf396efeb,
+ 0x600b4f78,
+ 0xe5bb760b,
+ 0x53acaef8,
+ 0x4ef88b0e,
+ 0xcfef9e09,
+ 0xabf8751f,
+ 0xefef5bac,
+ 0x741f4fe8,
+ 0x751e760d,
+ 0x7fdbf081,
+ 0x741cafce,
+ 0xefcc7fce,
+ 0x751e70ac,
+ 0x741ce7bb,
+ 0x3372cfed,
+ 0xafdbefeb,
+ 0xe5bb760b,
+ 0x53f2aef8,
+ 0xafe8e7eb,
+ 0x4bf8771e,
+ 0x7e247fed,
+ 0x4fcbe2cc,
+ 0x7fbc30a9,
+ 0x7b0f7a0f,
+ 0x34d577fd,
+ 0x308b5db7,
+ 0xde553e5f,
+ 0xaf78741f,
+ 0x741f30f0,
+ 0xcfef5e2c,
+ 0x741f3eac,
+ 0xafb8771e,
+ 0x5e677fed,
+ 0x0bd3e2cc,
+ 0x741ccfec,
+ 0xe5ca53cd,
+ 0x6fcb4f74,
+ 0x5dadde4b,
+ 0x2ab63d38,
+ 0x4bb3de30,
+ 0x751f741c,
+ 0x6c42effa,
+ 0xefea7fce,
+ 0x6ffc30be,
+ 0xefec3fca,
+ 0x30b3de2e,
+ 0xadf85d9e,
+ 0xaf7daefd,
+ 0x5d9ede2e,
+ 0x5d9eafdd,
+ 0x761f10ac,
+ 0x1da07efd,
+ 0x30adfffe,
+ 0x4908fb18,
+ 0x5fffdfff,
+ 0xafbb709b,
+ 0x4ef85e67,
+ 0xadf814ad,
+ 0x7a0f70ad,
+ 0xcfef50ad,
+ 0x7a0fde30,
+ 0x5da0afed,
+ 0x3c12780f,
+ 0xefef780f,
+ 0xefef790f,
+ 0xa7f85e0f,
+ 0xffef790f,
+ 0xefef790f,
+ 0x14adde2e,
+ 0x5d9eadfd,
+ 0x5e2dfffb,
+ 0xe79addfd,
+ 0xeff96079,
+ 0x607ae79a,
+ 0xddfceff9,
+ 0x60795dff,
+ 0x607acfef,
+ 0xefefefdf,
+ 0xefbfef7f,
+ 0xeeffedff,
+ 0xebffe7ff,
+ 0xafefafdf,
+ 0xafbfaf7f,
+ 0xaeffadff,
+ 0xabffa7ff,
+ 0x6fef6fdf,
+ 0x6fbf6f7f,
+ 0x6eff6dff,
+ 0x6bff67ff,
+ 0x2fef2fdf,
+ 0x2fbf2f7f,
+ 0x2eff2dff,
+ 0x2bff27ff,
+ 0x4e08fd1f,
+ 0xe5ff6e0f,
+ 0xaff87eef,
+ 0x7e0ffdef,
+ 0xf11f6079,
+ 0xabf8f542,
+ 0x7e0af11c,
+ 0x37cfae3a,
+ 0x7fec90be,
+ 0xadf8efdc,
+ 0xcfeae52f,
+ 0x7d0fe12b,
+ 0xf11c6079,
+ 0x7e0a4df8,
+ 0xcfea5dc4,
+ 0x7d0befec,
+ 0xcfea5dc6,
+ 0xe522efdc,
+ 0x5dc6cfda,
+ 0x4e08fd1f,
+ 0x6e0faff8,
+ 0x7c1f761f,
+ 0xfdeff91f,
+ 0x6079abf8,
+ 0x761cee24,
+ 0xf91f2bfb,
+ 0xefefcfec,
+ 0xf91f6079,
+ 0x761c27fb,
+ 0xefdf5da7,
+ 0xcfdc7fdd,
+ 0xd09c4bf8,
+ 0x47fd7c1f,
+ 0x761ccfcf,
+ 0x7eef7fed,
+ 0x7dfdf093,
+ 0xef7e7f1e,
+ 0x771efb18,
+ 0x6079e722,
+ 0xe6bbe5bb,
+ 0xae0ae5bb,
+ 0x600bae85,
+ 0xe2bbe2bb,
+ 0xe2bbe2bb,
+ 0xaf02e2bb,
+ 0xe2bb2ff9,
+ 0x6079e2bb
+};
+
+uint patch_2f00[] = {
+ 0x30303030,
+ 0x3e3e3434,
+ 0xabbf9b99,
+ 0x4b4fbdbd,
+ 0x59949334,
+ 0x9fff37fb,
+ 0x9b177dd9,
+ 0x936956bb,
+ 0xfbdd697b,
+ 0xdd2fd113,
+ 0x1db9f7bb,
+ 0x36313963,
+ 0x79373369,
+ 0x3193137f,
+ 0x7331737a,
+ 0xf7bb9b99,
+ 0x9bb19795,
+ 0x77fdfd3d,
+ 0x573b773f,
+ 0x737933f7,
+ 0xb991d115,
+ 0x31699315,
+ 0x31531694,
+ 0xbf4fbdbd,
+ 0x35931497,
+ 0x35376956,
+ 0xbd697b9d,
+ 0x96931313,
+ 0x19797937,
+ 0x6935af78,
+ 0xb9b3baa3,
+ 0xb8788683,
+ 0x368f78f7,
+ 0x87778733,
+ 0x3ffffb3b,
+ 0x8e8f78b8,
+ 0x1d118e13,
+ 0xf3ff3f8b,
+ 0x6bd8e173,
+ 0xd1366856,
+ 0x68d1687b,
+ 0x3daf78b8,
+ 0x3a3a3f87,
+ 0x8f81378f,
+ 0xf876f887,
+ 0x77fd8778,
+ 0x737de8d6,
+ 0xbbf8bfff,
+ 0xd8df87f7,
+ 0xfd876f7b,
+ 0x8bfff8bd,
+ 0x8683387d,
+ 0xb873d87b,
+ 0x3b8fd7f8,
+ 0xf7338883,
+ 0xbb8ee1f8,
+ 0xef837377,
+ 0x3337b836,
+ 0x817d11f8,
+ 0x7378b878,
+ 0xd3368b7d,
+ 0xed731b7d,
+ 0x833731f3,
+ 0xf22f3f23
+};
+
+uint patch_2e00[] = {
+ 0x27eeeeee,
+ 0xeeeeeeee,
+ 0xeeeeeeee,
+ 0xeeeeeeee,
+ 0xee4bf4fb,
+ 0xdbd259bb,
+ 0x1979577f,
+ 0xdfd2d573,
+ 0xb773f737,
+ 0x4b4fbdbd,
+ 0x25b9b177,
+ 0xd2d17376,
+ 0x956bbfdd,
+ 0x697bdd2f,
+ 0xff9f79ff,
+ 0xff9ff22f
+};
+#endif
+
+/*
+ * USB SOF patch arrays.
+ */
+
+#ifdef CONFIG_USB_SOF_UCODE_PATCH
+
+uint patch_2000[] = {
+ 0x7fff0000,
+ 0x7ffd0000,
+ 0x7ffb0000,
+ 0x49f7ba5b,
+ 0xba383ffb,
+ 0xf9b8b46d,
+ 0xe5ab4e07,
+ 0xaf77bffe,
+ 0x3f7bbf79,
+ 0xba5bba38,
+ 0xe7676076,
+ 0x60750000
+};
+
+uint patch_2f00[] = {
+ 0x3030304c,
+ 0xcab9e441,
+ 0xa1aaf220
+};
+#endif
+
+void
+cpm_load_patch(volatile immap_t *immr)
+{
+ volatile uint *dp; /* Dual-ported RAM. */
+ volatile cpm8xx_t *commproc;
+ volatile iic_t *iip;
+ volatile spi_t *spp;
+ volatile smc_uart_t *smp;
+ int i;
+
+ commproc = (cpm8xx_t *)&immr->im_cpm;
+
+#ifdef CONFIG_USB_SOF_UCODE_PATCH
+ commproc->cp_rccr = 0;
+
+ dp = (uint *)(commproc->cp_dpmem);
+ for (i=0; i<(sizeof(patch_2000)/4); i++)
+ *dp++ = patch_2000[i];
+
+ dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
+ for (i=0; i<(sizeof(patch_2f00)/4); i++)
+ *dp++ = patch_2f00[i];
+
+ commproc->cp_rccr = 0x0009;
+
+ printk("USB SOF microcode patch installed\n");
+#endif /* CONFIG_USB_SOF_UCODE_PATCH */
+
+#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
+ defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
+
+ commproc->cp_rccr = 0;
+
+ dp = (uint *)(commproc->cp_dpmem);
+ for (i=0; i<(sizeof(patch_2000)/4); i++)
+ *dp++ = patch_2000[i];
+
+ dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
+ for (i=0; i<(sizeof(patch_2f00)/4); i++)
+ *dp++ = patch_2f00[i];
+
+ iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC];
+# define RPBASE 0x0500
+ iip->iic_rpbase = RPBASE;
+
+ /* Put SPI above the IIC, also 32-byte aligned.
+ */
+ i = (RPBASE + sizeof(iic_t) + 31) & ~31;
+ spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
+ spp->spi_rpbase = i;
+
+# if defined(CONFIG_I2C_SPI_UCODE_PATCH)
+ commproc->cp_cpmcr1 = 0x802a;
+ commproc->cp_cpmcr2 = 0x8028;
+ commproc->cp_cpmcr3 = 0x802e;
+ commproc->cp_cpmcr4 = 0x802c;
+ commproc->cp_rccr = 1;
+
+ printk("I2C/SPI microcode patch installed.\n");
+# endif /* CONFIG_I2C_SPI_UCODE_PATCH */
+
+# if defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
+
+ dp = (uint *)&(commproc->cp_dpmem[0x0e00]);
+ for (i=0; i<(sizeof(patch_2e00)/4); i++)
+ *dp++ = patch_2e00[i];
+
+ commproc->cp_cpmcr1 = 0x8080;
+ commproc->cp_cpmcr2 = 0x808a;
+ commproc->cp_cpmcr3 = 0x8028;
+ commproc->cp_cpmcr4 = 0x802a;
+ commproc->cp_rccr = 3;
+
+ smp = (smc_uart_t *)&commproc->cp_dparam[PROFF_SMC1];
+ smp->smc_rpbase = 0x1FC0;
+
+ printk("I2C/SPI/SMC1 microcode patch installed.\n");
+# endif /* CONFIG_I2C_SPI_SMC1_UCODE_PATCH) */
+
+#endif /* some variation of the I2C/SPI patch was selected */
+}
+
+/*
+ * Take this entire routine out, since no one calls it and its
+ * logic is suspect.
+ */
+
+#if 0
+void
+verify_patch(volatile immap_t *immr)
+{
+ volatile uint *dp;
+ volatile cpm8xx_t *commproc;
+ int i;
+
+ commproc = (cpm8xx_t *)&immr->im_cpm;
+
+ printk("cp_rccr %x\n", commproc->cp_rccr);
+ commproc->cp_rccr = 0;
+
+ dp = (uint *)(commproc->cp_dpmem);
+ for (i=0; i<(sizeof(patch_2000)/4); i++)
+ if (*dp++ != patch_2000[i]) {
+ printk("patch_2000 bad at %d\n", i);
+ dp--;
+ printk("found 0x%X, wanted 0x%X\n", *dp, patch_2000[i]);
+ break;
+ }
+
+ dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
+ for (i=0; i<(sizeof(patch_2f00)/4); i++)
+ if (*dp++ != patch_2f00[i]) {
+ printk("patch_2f00 bad at %d\n", i);
+ dp--;
+ printk("found 0x%X, wanted 0x%X\n", *dp, patch_2f00[i]);
+ break;
+ }
+
+ commproc->cp_rccr = 0x0009;
+}
+#endif