summaryrefslogtreecommitdiff
path: root/arch/ppc/8xx_io/commproc.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/8xx_io/commproc.c')
-rw-r--r--arch/ppc/8xx_io/commproc.c464
1 files changed, 464 insertions, 0 deletions
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
new file mode 100644
index 000000000000..0cc2e7a9cb11
--- /dev/null
+++ b/arch/ppc/8xx_io/commproc.c
@@ -0,0 +1,464 @@
+/*
+ * General Purpose functions for the global management of the
+ * Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space. The allocator for that is here. When the communication
+ * process is reset, we reclaim the memory available. There is
+ * currently no deallocator for this memory.
+ * The amount of space available is platform dependent. On the
+ * MBX, the EPPC software loads additional microcode into the
+ * communication processor, and uses some of the DP ram for this
+ * purpose. Current, the first 512 bytes and the last 256 bytes of
+ * memory are used. Right now I am conservative and only use the
+ * memory that can never be used for microcode. If there are
+ * applications that require more DP ram, we can expand the boundaries
+ * but then we have to be careful of any downloaded microcode.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <asm/mpc8xx.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/8xx_immap.h>
+#include <asm/commproc.h>
+#include <asm/io.h>
+#include <asm/tlbflush.h>
+#include <asm/rheap.h>
+
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep);
+
+static void m8xx_cpm_dpinit(void);
+static uint host_buffer; /* One page of host buffer */
+static uint host_end; /* end + 1 */
+cpm8xx_t *cpmp; /* Pointer to comm processor space */
+
+/* CPM interrupt vector functions.
+*/
+struct cpm_action {
+ void (*handler)(void *, struct pt_regs * regs);
+ void *dev_id;
+};
+static struct cpm_action cpm_vecs[CPMVEC_NR];
+static irqreturn_t cpm_interrupt(int irq, void * dev, struct pt_regs * regs);
+static irqreturn_t cpm_error_interrupt(int irq, void *dev, struct pt_regs * regs);
+static void alloc_host_memory(void);
+/* Define a table of names to identify CPM interrupt handlers in
+ * /proc/interrupts.
+ */
+const char *cpm_int_name[] =
+ { "error", "PC4", "PC5", "SMC2",
+ "SMC1", "SPI", "PC6", "Timer 4",
+ "", "PC7", "PC8", "PC9",
+ "Timer 3", "", "PC10", "PC11",
+ "I2C", "RISC Timer", "Timer 2", "",
+ "IDMA2", "IDMA1", "SDMA error", "PC12",
+ "PC13", "Timer 1", "PC14", "SCC4",
+ "SCC3", "SCC2", "SCC1", "PC15"
+ };
+
+static void
+cpm_mask_irq(unsigned int irq)
+{
+ int cpm_vec = irq - CPM_IRQ_OFFSET;
+
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << cpm_vec);
+}
+
+static void
+cpm_unmask_irq(unsigned int irq)
+{
+ int cpm_vec = irq - CPM_IRQ_OFFSET;
+
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << cpm_vec);
+}
+
+static void
+cpm_ack(unsigned int irq)
+{
+ /* We do not need to do anything here. */
+}
+
+static void
+cpm_eoi(unsigned int irq)
+{
+ int cpm_vec = irq - CPM_IRQ_OFFSET;
+
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr = (1 << cpm_vec);
+}
+
+struct hw_interrupt_type cpm_pic = {
+ .typename = " CPM ",
+ .enable = cpm_unmask_irq,
+ .disable = cpm_mask_irq,
+ .ack = cpm_ack,
+ .end = cpm_eoi,
+};
+
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+
+void
+m8xx_cpm_reset(uint bootpage)
+{
+ volatile immap_t *imp;
+ volatile cpm8xx_t *commproc;
+ pte_t *pte;
+
+ imp = (immap_t *)IMAP_ADDR;
+ commproc = (cpm8xx_t *)&imp->im_cpm;
+
+#ifdef CONFIG_UCODE_PATCH
+ /* Perform a reset.
+ */
+ commproc->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
+
+ /* Wait for it.
+ */
+ while (commproc->cp_cpcr & CPM_CR_FLG);
+
+ cpm_load_patch(imp);
+#endif
+
+ /* Set SDMA Bus Request priority 5.
+ * On 860T, this also enables FEC priority 6. I am not sure
+ * this is what we realy want for some applications, but the
+ * manual recommends it.
+ * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
+ */
+ imp->im_siu_conf.sc_sdcr = 1;
+
+ /* Reclaim the DP memory for our use. */
+ m8xx_cpm_dpinit();
+
+ /* get the PTE for the bootpage */
+ if (!get_pteptr(&init_mm, bootpage, &pte))
+ panic("get_pteptr failed\n");
+
+ /* and make it uncachable */
+ pte_val(*pte) |= _PAGE_NO_CACHE;
+ _tlbie(bootpage);
+
+ host_buffer = bootpage;
+ host_end = host_buffer + PAGE_SIZE;
+
+ /* Tell everyone where the comm processor resides.
+ */
+ cpmp = (cpm8xx_t *)commproc;
+}
+
+/* We used to do this earlier, but have to postpone as long as possible
+ * to ensure the kernel VM is now running.
+ */
+static void
+alloc_host_memory(void)
+{
+ dma_addr_t physaddr;
+
+ /* Set the host page for allocation.
+ */
+ host_buffer = (uint)dma_alloc_coherent(NULL, PAGE_SIZE, &physaddr,
+ GFP_KERNEL);
+ host_end = host_buffer + PAGE_SIZE;
+}
+
+/* This is called during init_IRQ. We used to do it above, but this
+ * was too early since init_IRQ was not yet called.
+ */
+static struct irqaction cpm_error_irqaction = {
+ .handler = cpm_error_interrupt,
+ .mask = CPU_MASK_NONE,
+};
+static struct irqaction cpm_interrupt_irqaction = {
+ .handler = cpm_interrupt,
+ .mask = CPU_MASK_NONE,
+ .name = "CPM cascade",
+};
+
+void
+cpm_interrupt_init(void)
+{
+ int i;
+
+ /* Initialize the CPM interrupt controller.
+ */
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr =
+ (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
+ ((CPM_INTERRUPT/2) << 13) | CICR_HP_MASK;
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr = 0;
+
+ /* install the CPM interrupt controller routines for the CPM
+ * interrupt vectors
+ */
+ for ( i = CPM_IRQ_OFFSET ; i < CPM_IRQ_OFFSET + NR_CPM_INTS ; i++ )
+ irq_desc[i].handler = &cpm_pic;
+
+ /* Set our interrupt handler with the core CPU. */
+ if (setup_irq(CPM_INTERRUPT, &cpm_interrupt_irqaction))
+ panic("Could not allocate CPM IRQ!");
+
+ /* Install our own error handler. */
+ cpm_error_irqaction.name = cpm_int_name[CPMVEC_ERROR];
+ if (setup_irq(CPM_IRQ_OFFSET + CPMVEC_ERROR, &cpm_error_irqaction))
+ panic("Could not allocate CPM error IRQ!");
+
+ ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr |= CICR_IEN;
+}
+
+/*
+ * Get the CPM interrupt vector.
+ */
+int
+cpm_get_irq(struct pt_regs *regs)
+{
+ int cpm_vec;
+
+ /* Get the vector by setting the ACK bit and then reading
+ * the register.
+ */
+ ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1;
+ cpm_vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr;
+ cpm_vec >>= 11;
+
+ return cpm_vec;
+}
+
+/* CPM interrupt controller cascade interrupt.
+*/
+static irqreturn_t
+cpm_interrupt(int irq, void * dev, struct pt_regs * regs)
+{
+ /* This interrupt handler never actually gets called. It is
+ * installed only to unmask the CPM cascade interrupt in the SIU
+ * and to make the CPM cascade interrupt visible in /proc/interrupts.
+ */
+ return IRQ_HANDLED;
+}
+
+/* The CPM can generate the error interrupt when there is a race condition
+ * between generating and masking interrupts. All we have to do is ACK it
+ * and return. This is a no-op function so we don't need any special
+ * tests in the interrupt handler.
+ */
+static irqreturn_t
+cpm_error_interrupt(int irq, void *dev, struct pt_regs *regs)
+{
+ return IRQ_HANDLED;
+}
+
+/* A helper function to translate the handler prototype required by
+ * request_irq() to the handler prototype required by cpm_install_handler().
+ */
+static irqreturn_t
+cpm_handler_helper(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int cpm_vec = irq - CPM_IRQ_OFFSET;
+
+ (*cpm_vecs[cpm_vec].handler)(dev_id, regs);
+
+ return IRQ_HANDLED;
+}
+
+/* Install a CPM interrupt handler.
+ * This routine accepts a CPM interrupt vector in the range 0 to 31.
+ * This routine is retained for backward compatibility. Rather than using
+ * this routine to install a CPM interrupt handler, you can now use
+ * request_irq() with an IRQ in the range CPM_IRQ_OFFSET to
+ * CPM_IRQ_OFFSET + NR_CPM_INTS - 1 (16 to 47).
+ *
+ * Notice that the prototype of the interrupt handler function must be
+ * different depending on whether you install the handler with
+ * request_irq() or cpm_install_handler().
+ */
+void
+cpm_install_handler(int cpm_vec, void (*handler)(void *, struct pt_regs *regs),
+ void *dev_id)
+{
+ int err;
+
+ /* If null handler, assume we are trying to free the IRQ.
+ */
+ if (!handler) {
+ free_irq(CPM_IRQ_OFFSET + cpm_vec, dev_id);
+ return;
+ }
+
+ if (cpm_vecs[cpm_vec].handler != 0)
+ printk(KERN_INFO "CPM interrupt %x replacing %x\n",
+ (uint)handler, (uint)cpm_vecs[cpm_vec].handler);
+ cpm_vecs[cpm_vec].handler = handler;
+ cpm_vecs[cpm_vec].dev_id = dev_id;
+
+ if ((err = request_irq(CPM_IRQ_OFFSET + cpm_vec, cpm_handler_helper,
+ 0, cpm_int_name[cpm_vec], dev_id)))
+ printk(KERN_ERR "request_irq() returned %d for CPM vector %d\n",
+ err, cpm_vec);
+}
+
+/* Free a CPM interrupt handler.
+ * This routine accepts a CPM interrupt vector in the range 0 to 31.
+ * This routine is retained for backward compatibility.
+ */
+void
+cpm_free_handler(int cpm_vec)
+{
+ request_irq(CPM_IRQ_OFFSET + cpm_vec, NULL, 0, 0,
+ cpm_vecs[cpm_vec].dev_id);
+
+ cpm_vecs[cpm_vec].handler = NULL;
+ cpm_vecs[cpm_vec].dev_id = NULL;
+}
+
+/* We also own one page of host buffer space for the allocation of
+ * UART "fifos" and the like.
+ */
+uint
+m8xx_cpm_hostalloc(uint size)
+{
+ uint retloc;
+
+ if (host_buffer == 0)
+ alloc_host_memory();
+
+ if ((host_buffer + size) >= host_end)
+ return(0);
+
+ retloc = host_buffer;
+ host_buffer += size;
+
+ return(retloc);
+}
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * four BRGs, any of which can be wired to any channel.
+ * The internal baud rate clock is the system clock divided by 16.
+ * This assumes the baudrate is 16x oversampled by the uart.
+ */
+#define BRG_INT_CLK (((bd_t *)__res)->bi_intfreq)
+#define BRG_UART_CLK (BRG_INT_CLK/16)
+#define BRG_UART_CLK_DIV16 (BRG_UART_CLK/16)
+
+void
+cpm_setbrg(uint brg, uint rate)
+{
+ volatile uint *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ bp = (uint *)&cpmp->cp_brgc1;
+ bp += brg;
+ /* The BRG has a 12-bit counter. For really slow baud rates (or
+ * really fast processors), we may have to further divide by 16.
+ */
+ if (((BRG_UART_CLK / rate) - 1) < 4096)
+ *bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN;
+ else
+ *bp = (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
+ CPM_BRG_EN | CPM_BRG_DIV16;
+}
+
+/*
+ * dpalloc / dpfree bits.
+ */
+static spinlock_t cpm_dpmem_lock;
+/*
+ * 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up...
+ */
+static rh_block_t cpm_boot_dpmem_rh_block[16];
+static rh_info_t cpm_dpmem_info;
+
+#define CPM_DPMEM_ALIGNMENT 8
+
+void m8xx_cpm_dpinit(void)
+{
+ cpm8xx_t *cp = &((immap_t *)IMAP_ADDR)->im_cpm;
+
+ spin_lock_init(&cpm_dpmem_lock);
+
+ /* Initialize the info header */
+ rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
+ sizeof(cpm_boot_dpmem_rh_block) /
+ sizeof(cpm_boot_dpmem_rh_block[0]),
+ cpm_boot_dpmem_rh_block);
+
+ /*
+ * Attach the usable dpmem area.
+ * XXX: This is actually crap. CPM_DATAONLY_BASE and
+ * CPM_DATAONLY_SIZE are a subset of the available dparm. It varies
+ * with the processor and the microcode patches applied / activated.
+ * But the following should be at least safe.
+ */
+ rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
+}
+
+/*
+ * Allocate the requested size worth of DP memory.
+ * This function used to return an index into the DPRAM area.
+ * Now it returns the actuall physical address of that area.
+ * use m8xx_cpm_dpram_offset() to get the index
+ */
+uint cpm_dpalloc(uint size, uint align)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ cpm_dpmem_info.alignment = align;
+ start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc);
+
+int cpm_dpfree(uint offset)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ ret = rh_free(&cpm_dpmem_info, (void *)offset);
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(cpm_dpfree);
+
+uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+{
+ void *start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cpm_dpmem_lock, flags);
+ cpm_dpmem_info.alignment = align;
+ start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+ spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+ return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc_fixed);
+
+void cpm_dpdump(void)
+{
+ rh_dump(&cpm_dpmem_info);
+}
+EXPORT_SYMBOL(cpm_dpdump);
+
+void *cpm_dpram_addr(uint offset)
+{
+ return ((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem + offset;
+}
+EXPORT_SYMBOL(cpm_dpram_addr);