Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:
   - Add sunxi_nand randomizer support
   - begin refactoring NAND ecclayout structs
   - fix pxa3xx_nand dmaengine usage
   - brcmnand: fix support for v7.1 controller
   - add Qualcomm NAND controller driver

  SPI NOR:
   - add new ls1021a, ls2080a support to Freescale QuadSPI
   - add new flash ID entries
   - support bottom-block protection for Winbond flash
   - support Status Register Write Protect
   - remove broken QPI support for Micron SPI flash

  JFFS2:
   - improve post-mount CRC scan efficiency

  General:
   - refactor bcm63xxpart parser, to later extend for NAND
   - add writebuf size parameter to mtdram

  Other minor code quality improvements"

* tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits)
  mtd: nand: remove kerneldoc for removed function parameter
  mtd: nand: Qualcomm NAND controller driver
  dt/bindings: qcom_nandc: Add DT bindings
  mtd: nand: don't select chip in nand_chip's block_bad op
  mtd: spi-nor: support lock/unlock for a few Winbond chips
  mtd: spi-nor: add TB (Top/Bottom) protect support
  mtd: spi-nor: add SPI_NOR_HAS_LOCK flag
  mtd: spi-nor: use BIT() for flash_info flags
  mtd: spi-nor: disallow further writes to SR if WP# is low
  mtd: spi-nor: make lock/unlock bounds checks more obvious and robust
  mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region
  mtd: spi-nor: wait for SR_WIP to clear on initial unlock
  mtd: nand: simplify nand_bch_init() usage
  mtd: mtdswap: remove useless if (!mtd->ecclayout) test
  mtd: create an mtd_oobavail() helper and make use of it
  mtd: kill the ecclayout->oobavail field
  mtd: nand: check status before reporting timeout
  mtd: bcm63xxpart: give width specifier an 'int', not 'size_t'
  mtd: mtdram: Add parameter for setting writebuf size
  mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd'
  ...

3 files changed, 108 insertions, 14 deletions

diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 7d4c8eb775a5..d53aba98fbc9 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -1,7 +1,10 @@
 Atmel NAND flash
 
 Required properties:
-- compatible : should be "atmel,at91rm9200-nand" or "atmel,sama5d4-nand".
+- compatible: The possible values are:
+	"atmel,at91rm9200-nand"
+	"atmel,sama5d2-nand"
+	"atmel,sama5d4-nand"
 - reg : should specify localbus address and size used for the chip,
 	and hardware ECC controller if available.
 	If the hardware ECC is PMECC, it should contain address and size for
@@ -21,10 +24,11 @@ Optional properties:
 - nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default.
   Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
   "soft_bch".
-- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware.
-  Only supported by at91sam9x5 or later sam9 product.
+- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware,
+  capable of BCH encoding and decoding, on devices where it is present.
 - atmel,pmecc-cap : error correct capability for Programmable Multibit ECC
-  Controller. Supported values are: 2, 4, 8, 12, 24.
+  Controller. Supported values are: 2, 4, 8, 12, 24. If the compatible string
+  is "atmel,sama5d2-nand", 32 is also valid.
 - atmel,pmecc-sector-size : sector size for ECC computation. Supported values
   are: 512, 1024.
 - atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM
@@ -32,15 +36,16 @@ Optional properties:
   sector size 1024. If not specified, driver will build the table in runtime.
 - nand-bus-width : 8 or 16 bus width if not present 8
 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
-- Nand Flash Controller(NFC) is a slave driver under Atmel nand flash
-  - Required properties:
-    - compatible : "atmel,sama5d3-nfc".
-    - reg : should specify the address and size used for NFC command registers,
-            NFC registers and NFC Sram. NFC Sram address and size can be absent
-            if don't want to use it.
-    - clocks: phandle to the peripheral clock
-  - Optional properties:
-    - atmel,write-by-sram: boolean to enable NFC write by sram.
+
+Nand Flash Controller(NFC) is an optional sub-node
+Required properties:
+- compatible : "atmel,sama5d3-nfc" or "atmel,sama5d4-nfc".
+- reg : should specify the address and size used for NFC command registers,
+        NFC registers and NFC SRAM. NFC SRAM address and size can be absent
+        if don't want to use it.
+- clocks: phandle to the peripheral clock
+Optional properties:
+- atmel,write-by-sram: boolean to enable NFC write by SRAM.
 
 Examples:
 nand0: nand@40000000,0 {
diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index 00c587b3d3ae..0333ec87dc49 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -3,7 +3,9 @@
 Required properties:
   - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
 		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
-		 "fsl,ls1021-qspi"
+		 "fsl,ls1021a-qspi"
+		 or
+		 "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi"
   - reg : the first contains the register location and length,
           the second contains the memory mapping address and length
   - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
@@ -19,6 +21,7 @@ Optional properties:
 			      But if there are two NOR flashes connected to the
 			      bus, you should enable this property.
 			      (Please check the board's schematic.)
+  - big-endian : That means the IP register is big endian
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
new file mode 100644
index 000000000000..70dd5118a324
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
@@ -0,0 +1,86 @@
+* Qualcomm NAND controller
+
+Required properties:
+- compatible:		should be "qcom,ipq806x-nand"
+- reg:			MMIO address range
+- clocks:		must contain core clock and always on clock
+- clock-names:		must contain "core" for the core clock and "aon" for the
+			always on clock
+- dmas:			DMA specifier, consisting of a phandle to the ADM DMA
+			controller node and the channel number to be used for
+			NAND. Refer to dma.txt and qcom_adm.txt for more details
+- dma-names:		must be "rxtx"
+- qcom,cmd-crci:	must contain the ADM command type CRCI block instance
+			number specified for the NAND controller on the given
+			platform
+- qcom,data-crci:	must contain the ADM data type CRCI block instance
+			number specified for the NAND controller on the given
+			platform
+- #address-cells:	<1> - subnodes give the chip-select number
+- #size-cells:		<0>
+
+* NAND chip-select
+
+Each controller may contain one or more subnodes to represent enabled
+chip-selects which (may) contain NAND flash chips. Their properties are as
+follows.
+
+Required properties:
+- compatible:		should contain "qcom,nandcs"
+- reg:			a single integer representing the chip-select
+			number (e.g., 0, 1, 2, etc.)
+- #address-cells:	see partition.txt
+- #size-cells:		see partition.txt
+- nand-ecc-strength:	see nand.txt
+- nand-ecc-step-size:	must be 512. see nand.txt for more details.
+
+Optional properties:
+- nand-bus-width:	see nand.txt
+
+Each nandcs device node may optionally contain a 'partitions' sub-node, which
+further contains sub-nodes describing the flash partition mapping. See
+partition.txt for more detail.
+
+Example:
+
+nand@1ac00000 {
+	compatible = "qcom,ebi2-nandc";
+	reg = <0x1ac00000 0x800>;
+
+	clocks = <&gcc EBI2_CLK>,
+		 <&gcc EBI2_AON_CLK>;
+	clock-names = "core", "aon";
+
+	dmas = <&adm_dma 3>;
+	dma-names = "rxtx";
+	qcom,cmd-crci = <15>;
+	qcom,data-crci = <3>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nandcs@0 {
+		compatible = "qcom,nandcs";
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot-nand";
+				reg = <0 0x58a0000>;
+			};
+
+			partition@58a0000 {
+				label = "fs-nand";
+				reg = <0x58a0000 0x4000000>;
+			};
+		};
+	};
+};