Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The irq department provides:

   - Support for MSI to wire bridges and a first user of it

   - More ACPI support for ARM/GIC

   - A new TS-4800 interrupt controller driver

   - RCU based free of interrupt descriptors to support the upcoming
     Intel VMD technology without introducing a locking nightmare

   - The usual pile of fixes and updates to drivers and core code"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  irqchip/omap-intc: Add support for spurious irq handling
  irqchip/zevio: Use irq_data_get_chip_type() helper
  irqchip/omap-intc: Remove duplicate setup for IRQ chip type handler
  irqchip/ts4800: Add TS-4800 interrupt controller
  irqchip/ts4800: Add documentation for TS-4800 interrupt controller
  irq/platform-MSI: Increase the maximum MSIs the MSI framework can support
  irqchip/gicv2m: Miscellaneous fixes for v2m resources and SPI ranges
  irqchip/bcm2836: Make code more readable
  irqchip/bcm2836: Tolerate IRQs while no flag is set in ISR
  irqchip/bcm2836: Add SMP support for the 2836
  irqchip/bcm2836: Fix initialization of the LOCAL_IRQ_CNT timers
  irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support
  irqchip/gic-v2m: Refactor to prepare for ACPI support
  irqdomain: Introduce is_fwnode_irqchip helper
  acpi: pci: Setup MSI domain for ACPI based pci devices
  genirq/msi: Export functions to allow MSI domains in modules
  irqchip/mbigen: Implement the mbigen irq chip operation functions
  irqchip/mbigen: Create irq domain for each mbigen device
  irqchip/mgigen: Add platform device driver for mbigen device
  dt-bindings: Documents the mbigen bindings
  ...

4 files changed, 92 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
index d1c5cdabc3e0..81cd3692405e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt
@@ -4,7 +4,7 @@ Allwinner Sunxi NMI Controller
 Required properties:
 
 - compatible : should be "allwinner,sun7i-a20-sc-nmi" or
-  "allwinner,sun6i-a31-sc-nmi"
+  "allwinner,sun6i-a31-sc-nmi" or "allwinner,sun9i-a80-nmi"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
index cc56021eb60b..5a1cb4bc3dfe 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
@@ -18,6 +18,7 @@ Main node required properties:
 	"arm,cortex-a9-gic"
 	"arm,gic-400"
 	"arm,pl390"
+	"arm,tc11mp-gic"
 	"brcm,brahma-b15-gic"
 	"qcom,msm-8660-qgic"
 	"qcom,msm-qgic2"
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
new file mode 100644
index 000000000000..720f7c92e9a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
@@ -0,0 +1,74 @@
+Hisilicon mbigen device tree bindings.
+=======================================
+
+Mbigen means: message based interrupt generator.
+
+MBI is kind of msi interrupt only used on Non-PCI devices.
+
+To reduce the wired interrupt number connected to GIC,
+Hisilicon designed mbigen to collect and generate interrupt.
+
+
+Non-pci devices can connect to mbigen and generate the
+interrupt by writing ITS register.
+
+The mbigen chip and devices connect to mbigen have the following properties:
+
+Mbigen main node required properties:
+-------------------------------------------
+- compatible: Should be "hisilicon,mbigen-v2"
+
+- reg: Specifies the base physical address and size of the Mbigen
+  registers.
+
+- interrupt controller: Identifies the node as an interrupt controller
+
+- msi-parent: Specifies the MSI controller this mbigen use.
+  For more detail information,please refer to the generic msi-parent binding in
+  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+- num-pins: the total number of pins implemented in this Mbigen
+  instance.
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value must be 2.
+
+  The 1st cell is hardware pin number of the interrupt.This number is local to
+  each mbigen chip and in the range from 0 to the maximum interrupts number
+  of the mbigen.
+
+  The 2nd cell is the interrupt trigger type.
+	The value of this cell should be:
+	1: rising edge triggered
+	or
+	4: high level triggered
+
+Examples:
+
+	mbigen_device_gmac:intc {
+			compatible = "hisilicon,mbigen-v2";
+			reg = <0x0 0xc0080000 0x0 0x10000>;
+			interrupt-controller;
+			msi-parent = <&its_dsa 0x40b1c>;
+			num-pins = <9>;
+			#interrupt-cells = <2>;
+	};
+
+Devices connect to mbigen required properties:
+----------------------------------------------------
+-interrupt-parent: Specifies the mbigen device node which device connected.
+
+-interrupts:Specifies the interrupt source.
+ For the specific information of each cell in this property,please refer to
+ the "interrupt-cells" description mentioned above.
+
+Examples:
+	gmac0: ethernet@c2080000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0xc2080000 0 0x20000>,
+		      <0 0xc0000000 0 0x1000>;
+		interrupt-parent  = <&mbigen_device_gmac>;
+		interrupts =	<656 1>,
+				<657 1>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
new file mode 100644
index 000000000000..7f15f1b0325b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
@@ -0,0 +1,16 @@
+TS-4800 FPGA interrupt controller
+
+TS-4800 FPGA has an internal interrupt controller. When one of the
+interrupts is triggered, the SoC is notified, usually using a GPIO as
+parent interrupt source.
+
+Required properties:
+- compatible: should be "technologic,ts4800-irqc"
+- interrupt-controller: identifies the node as an interrupt controller
+- reg: physical base address of the controller and length of memory mapped
+  region
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+  source, should be 1.
+- interrupt-parent: phandle to the parent interrupt controller this one is
+  cascaded from
+- interrupts: specifies the interrupt line in the interrupt-parent controller