Merge tag 'staging-4.15-rc1' into v4l_for_linus

There are some conflicts between staging and media trees,
as reported by Stephen Rothwell <sfr@canb.auug.org.au>.

So, merge from staging.

* tag 'staging-4.15-rc1': (775 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 20 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
new file mode 100644
index 000000000000..eaebbf8dab40
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
@@ -0,0 +1,20 @@
+Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver
+
+Datasheet publicly available at:
+https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
+
+Required properties:
+	- compatible: Should be one of
+		maxim,ds4422
+		maxim,ds4424
+	- reg: Should contain the DAC I2C address
+
+Optional properties:
+	- vcc-supply: Power supply is optional. If not defined, driver will ignore it.
+
+Example:
+	ds4224@10 {
+		compatible = "maxim,ds4424";
+		reg = <0x10>; /* When A0, A1 pins are ground */
+		vcc-supply = <&vcc_3v3>;
+	};