Merge tag 'staging-4.15-rc1' into v4l_for_linus

There are some conflicts between staging and media trees,
as reported by Stephen Rothwell <sfr@canb.auug.org.au>.

So, merge from staging.

* tag 'staging-4.15-rc1': (775 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

15 files changed, 254 insertions, 23 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 7eead5f97e02..2e3f919485f4 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -522,6 +522,7 @@ Description:
 		Specifies the output powerdown mode.
 		DAC output stage is disconnected from the amplifier and
 		1kohm_to_gnd: connected to ground via an 1kOhm resistor,
+		2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor,
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
 		90kohm_to_gnd: connected to ground via a 90kOhm resistor,
@@ -1242,9 +1243,9 @@ What:		/sys/.../iio:deviceX/in_distance_raw
 KernelVersion:	4.0
 Contact:	linux-iio@vger.kernel.org
 Description:
-		This attribute is used to read the distance covered by the user
-		since the last reboot while activated. Units after application
-		of scale are meters.
+		This attribute is used to read the measured distance to an object
+		or the distance covered by the user since the last reboot while
+		activated. Units after application of scale are meters.
 
 What:		/sys/bus/iio/devices/iio:deviceX/store_eeprom
 KernelVersion:	3.4.0
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
index 297b9720f024..0e95c2ca105c 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
+++ b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
@@ -16,3 +16,13 @@ Description:
                 the motion sensor is placed. For example, in a laptop a motion
                 sensor can be located on the base or on the lid. Current valid
 		values are 'base' and 'lid'.
+
+What:		/sys/bus/iio/devices/iio:deviceX/id
+Date:		Septembre 2017
+KernelVersion:	4.14
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is exposed by the CrOS EC legacy accelerometer
+		driver and represents the sensor ID as exposed by the EC. This
+		ID is used by the Android sensor service hardware abstraction
+		layer (sensor HAL) through the Android container on ChromeOS.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
index 33e96f740639..147d4e8a1403 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -14,3 +14,11 @@ Description:
 		Show or set the gain boost of the amp, from 0-31 range.
 		18 = indoors (default)
 		14 = outdoors
+
+What		/sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+		When 1 the noise level is over the trip level and not reporting
+		valid data
diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst
index 8282099e0cbf..5da10184d908 100644
--- a/Documentation/core-api/kernel-api.rst
+++ b/Documentation/core-api/kernel-api.rst
@@ -352,44 +352,30 @@ Read-Copy Update (RCU)
 ----------------------
 
 .. kernel-doc:: include/linux/rcupdate.h
-   :external:
 
 .. kernel-doc:: include/linux/rcupdate_wait.h
-   :external:
 
 .. kernel-doc:: include/linux/rcutree.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree.c
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree_plugin.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/tree_exp.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/update.c
-   :external:
 
 .. kernel-doc:: include/linux/srcu.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/srcutree.c
-   :external:
 
 .. kernel-doc:: include/linux/rculist_bl.h
-   :external:
 
 .. kernel-doc:: include/linux/rculist.h
-   :external:
 
 .. kernel-doc:: include/linux/rculist_nulls.h
-   :external:
 
 .. kernel-doc:: include/linux/rcu_sync.h
-   :external:
 
 .. kernel-doc:: kernel/rcu/sync.c
-   :external:
 
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
index bcd3ac8e6e0c..7d64753df949 100644
--- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
@@ -29,15 +29,29 @@ Required properties:
 				"microchip,mcp3204"
 				"microchip,mcp3208"
 				"microchip,mcp3301"
+				"microchip,mcp3550-50"
+				"microchip,mcp3550-60"
+				"microchip,mcp3551"
+				"microchip,mcp3553"
 
 			NOTE: The use of the compatibles with no vendor prefix
 			is deprecated and only listed because old DT use them.
 
+	- spi-cpha, spi-cpol (boolean):
+			Either SPI mode (0,0) or (1,1) must be used, so specify
+			none or both of spi-cpha, spi-cpol.  The MCP3550/1/3
+			is more efficient in mode (1,1) as only 3 instead of
+			4 bytes need to be read from the ADC, but not all SPI
+			masters support it.
+
+	- vref-supply:	Phandle to the external reference voltage supply.
+
 Examples:
 spi_controller {
 	mcp3x0x@0 {
 		compatible = "mcp3002";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
+		vref-supply = <&vref_reg>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
index 64dc4843c180..0df9befdaecc 100644
--- a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
@@ -12,6 +12,7 @@ for the Thermal Controller which holds a phandle to the AUXADC.
 Required properties:
   - compatible: Should be one of:
     - "mediatek,mt2701-auxadc": For MT2701 family of SoCs
+    - "mediatek,mt2712-auxadc": For MT2712 family of SoCs
     - "mediatek,mt7622-auxadc": For MT7622 family of SoCs
     - "mediatek,mt8173-auxadc": For MT8173 family of SoCs
   - reg: Address range of the AUXADC unit.
diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
new file mode 100644
index 000000000000..eaebbf8dab40
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
@@ -0,0 +1,20 @@
+Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver
+
+Datasheet publicly available at:
+https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
+
+Required properties:
+	- compatible: Should be one of
+		maxim,ds4422
+		maxim,ds4424
+	- reg: Should contain the DAC I2C address
+
+Optional properties:
+	- vcc-supply: Power supply is optional. If not defined, driver will ignore it.
+
+Example:
+	ds4224@10 {
+		compatible = "maxim,ds4424";
+		reg = <0x10>; /* When A0, A1 pins are ground */
+		vcc-supply = <&vcc_3v3>;
+	};
diff --git a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt
new file mode 100644
index 000000000000..9cb0e10df704
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt
@@ -0,0 +1,34 @@
+Texas Instruments 8/10/12-bit 2/4-channel DAC driver
+
+Required properties:
+ - compatible:		Must be one of:
+			"ti,dac082s085"
+			"ti,dac102s085"
+			"ti,dac122s085"
+			"ti,dac084s085"
+			"ti,dac104s085"
+			"ti,dac124s085"
+ - reg: 		Chip select number.
+ - spi-cpha, spi-cpol:	SPI mode (0,1) or (1,0) must be used, so specify
+			either spi-cpha or spi-cpol (but not both).
+ - vref-supply: 	Phandle to the external reference voltage supply.
+
+For other required and optional properties of SPI slave nodes please refer to
+../../spi/spi-bus.txt.
+
+Example:
+	vref_2v5_reg: regulator-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	dac@0 {
+		compatible = "ti,dac082s085";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-cpol;
+		vref-supply = <&vref_2v5_reg>;
+	};
diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt
index 295a9edfa4fd..8d8176459d09 100644
--- a/Documentation/devicetree/bindings/iio/health/max30100.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30100.txt
@@ -20,9 +20,9 @@ Optional properties:
 
 Example:
 
-max30100@057 {
+max30100@57 {
 	compatible = "maxim,max30100";
-	reg = <57>;
+	reg = <0x57>;
 	maxim,led-current-microamp = <24000 50000>;
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 2>;
diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
index c695e7cbeefb..8629c18b0e78 100644
--- a/Documentation/devicetree/bindings/iio/health/max30102.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30102.txt
@@ -20,7 +20,7 @@ Optional properties:
 
 Example:
 
-max30100@57 {
+max30102@57 {
 	compatible = "maxim,max30102";
 	reg = <0x57>;
 	maxim,red-led-current-microamp = <7000>;
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
index 38d74314b7ab..b6c1afa6f02d 100644
--- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
+++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
@@ -16,6 +16,10 @@ Optional properties:
 	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
 	  value 0 - 120pF. This will require using the calibration data from
 	  the manufacturer.
+	- ams,nflwdth: Set the noise and watchdog threshold register on
+	  startup. This will need to set according to the noise from the
+	  MCU board, and possibly the local environment. Refer to the
+	  datasheet for the threshold settings.
 
 Example:
 
@@ -27,4 +31,5 @@ as3935@0 {
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 1>;
 	ams,tuning-capacitor-pf = <80>;
+	ams,nflwdth = <0x44>;
 };
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index 9ec6f5ce54fc..6f626f73417e 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -46,6 +46,8 @@ Accelerometers:
 - st,h3lis331dl-accel
 - st,lng2dm-accel
 - st,lis3l02dq
+- st,lis2dw12
+- st,lis3dhh
 
 Gyroscopes:
 - st,l3g4200d-gyro
@@ -71,3 +73,5 @@ Pressure sensors:
 - st,lps25h-press
 - st,lps331ap-press
 - st,lps22hb-press
+- st,lps33hw
+- st,lps35hw
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 4c29cdab0ea5..5eb108e180fa 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -99,7 +99,7 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 	};
 
@@ -124,14 +124,14 @@ Examples:
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c200000 0 0x200000>;
+			reg = <0x0 0x2c200000 0 0x20000>;
 		};
 
 		gic-its@2c400000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			#msi-cells = <1>;
-			reg = <0x0 0x2c400000 0 0x200000>;
+			reg = <0x0 0x2c400000 0 0x20000>;
 		};
 
 		ppi-partitions {
diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst
index 82fc399fcd33..61e43cc3ed17 100644
--- a/Documentation/process/index.rst
+++ b/Documentation/process/index.rst
@@ -25,6 +25,7 @@ Below are the essential guides that every developer should read.
    submitting-patches
    coding-style
    email-clients
+   kernel-enforcement-statement
 
 Other guides to the community that are of interest to most developers are: 
 
diff --git a/Documentation/process/kernel-enforcement-statement.rst b/Documentation/process/kernel-enforcement-statement.rst
new file mode 100644
index 000000000000..1e23d4227337
--- /dev/null
+++ b/Documentation/process/kernel-enforcement-statement.rst
@@ -0,0 +1,147 @@
+Linux Kernel Enforcement Statement
+----------------------------------
+
+As developers of the Linux kernel, we have a keen interest in how our software
+is used and how the license for our software is enforced.  Compliance with the
+reciprocal sharing obligations of GPL-2.0 is critical to the long-term
+sustainability of our software and community.
+
+Although there is a right to enforce the separate copyright interests in the
+contributions made to our community, we share an interest in ensuring that
+individual enforcement actions are conducted in a manner that benefits our
+community and do not have an unintended negative impact on the health and
+growth of our software ecosystem.  In order to deter unhelpful enforcement
+actions, we agree that it is in the best interests of our development
+community to undertake the following commitment to users of the Linux kernel
+on behalf of ourselves and any successors to our copyright interests:
+
+    Notwithstanding the termination provisions of the GPL-2.0, we agree that
+    it is in the best interests of our development community to adopt the
+    following provisions of GPL-3.0 as additional permissions under our
+    license with respect to any non-defensive assertion of rights under the
+    license.
+
+	However, if you cease all violation of this License, then your license
+	from a particular copyright holder is reinstated (a) provisionally,
+	unless and until the copyright holder explicitly and finally
+	terminates your license, and (b) permanently, if the copyright holder
+	fails to notify you of the violation by some reasonable means prior to
+	60 days after the cessation.
+
+	Moreover, your license from a particular copyright holder is
+	reinstated permanently if the copyright holder notifies you of the
+	violation by some reasonable means, this is the first time you have
+	received notice of violation of this License (for any work) from that
+	copyright holder, and you cure the violation prior to 30 days after
+	your receipt of the notice.
+
+Our intent in providing these assurances is to encourage more use of the
+software.  We want companies and individuals to use, modify and distribute
+this software.  We want to work with users in an open and transparent way to
+eliminate any uncertainty about our expectations regarding compliance or
+enforcement that might limit adoption of our software.  We view legal action
+as a last resort, to be initiated only when other community efforts have
+failed to resolve the problem.
+
+Finally, once a non-compliance issue is resolved, we hope the user will feel
+welcome to join us in our efforts on this project.  Working together, we will
+be stronger.
+
+Except where noted below, we speak only for ourselves, and not for any company
+we might work for today, have in the past, or will in the future.
+
+  - Bjorn Andersson (Linaro)
+  - Andrea Arcangeli (Red Hat)
+  - Neil Armstrong
+  - Jens Axboe
+  - Pablo Neira Ayuso
+  - Khalid Aziz
+  - Ralf Baechle
+  - Felipe Balbi
+  - Arnd Bergmann
+  - Ard Biesheuvel
+  - Paolo Bonzini (Red Hat)
+  - Christian Borntraeger
+  - Mark Brown (Linaro)
+  - Paul Burton
+  - Javier Martinez Canillas
+  - Rob Clark
+  - Jonathan Corbet
+  - Vivien Didelot (Savoir-faire Linux)
+  - Hans de Goede (Red Hat)
+  - Mel Gorman (SUSE)
+  - Sven Eckelmann
+  - Alex Elder (Linaro)
+  - Fabio Estevam
+  - Larry Finger
+  - Bhumika Goyal
+  - Andy Gross
+  - Juergen Gross
+  - Shawn Guo
+  - Ulf Hansson
+  - Tejun Heo
+  - Rob Herring
+  - Masami Hiramatsu
+  - Michal Hocko
+  - Simon Horman
+  - Johan Hovold (Hovold Consulting AB)
+  - Christophe JAILLET
+  - Olof Johansson
+  - Lee Jones (Linaro)
+  - Heiner Kallweit
+  - Srinivas Kandagatla
+  - Jan Kara
+  - Shuah Khan (Samsung)
+  - David Kershner
+  - Jaegeuk Kim
+  - Namhyung Kim
+  - Colin Ian King
+  - Jeff Kirsher
+  - Greg Kroah-Hartman (Linux Foundation)
+  - Christian König
+  - Vinod Koul
+  - Krzysztof Kozlowski
+  - Viresh Kumar
+  - Aneesh Kumar K.V
+  - Julia Lawall
+  - Doug Ledford (Red Hat)
+  - Chuck Lever (Oracle)
+  - Daniel Lezcano
+  - Shaohua Li
+  - Xin Long (Red Hat)
+  - Tony Luck
+  - Mike Marshall
+  - Chris Mason
+  - Paul E. McKenney
+  - David S. Miller
+  - Ingo Molnar
+  - Kuninori Morimoto
+  - Borislav Petkov
+  - Jiri Pirko
+  - Josh Poimboeuf
+  - Sebastian Reichel (Collabora)
+  - Guenter Roeck
+  - Joerg Roedel
+  - Leon Romanovsky
+  - Steven Rostedt (VMware)
+  - Ivan Safonov
+  - Ivan Safonov
+  - Anna Schumaker
+  - Jes Sorensen
+  - K.Y. Srinivasan
+  - Heiko Stuebner
+  - Jiri Kosina (SUSE)
+  - Dmitry Torokhov
+  - Linus Torvalds
+  - Thierry Reding
+  - Rik van Riel
+  - Geert Uytterhoeven (Glider bvba)
+  - Daniel Vetter
+  - Linus Walleij
+  - Richard Weinberger
+  - Dan Williams
+  - Rafael J. Wysocki
+  - Arvind Yadav
+  - Masahiro Yamada
+  - Wei Yongjun
+  - Lv Zheng