1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id: i2c-s5l8700.c 28589 2010-11-14 15:19:30Z theseven $
*
* Copyright (C) 2009 by Bertrik Sikken
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "kernel.h"
#include "i2c-s5l8702.h"
/* Driver for the s5l8700 built-in I2C controller in master mode
Both the i2c_read and i2c_write function take the following arguments:
* slave, the address of the i2c slave device to read from / write to
* address, optional sub-address in the i2c slave (unused if -1)
* len, number of bytes to be transfered
* data, pointer to data to be transfered
A return value < 0 indicates an error.
Note:
* blocks the calling thread for the entire duraton of the i2c transfer but
uses wakeup_wait/wakeup_signal to allow other threads to run.
* ACK from slave is not checked, so functions never return an error
*/
static struct mutex i2c_mtx[2];
static void i2c_on(int bus)
{
/* enable I2C clock */
PWRCON(1) &= ~(1 << 4);
IICCON(bus) = (1 << 7) | /* ACK_GEN */
(0 << 6) | /* CLKSEL = PCLK/16 */
(1 << 5) | /* INT_EN */
(1 << 4) | /* IRQ clear */
(7 << 0); /* CK_REG */
/* serial output on */
IICSTAT(bus) = (1 << 4);
}
static void i2c_off(int bus)
{
/* serial output off */
IICSTAT(bus) = 0;
/* disable I2C clock */
PWRCON(1) |= (1 << 4);
}
void i2c_init()
{
mutex_init(&i2c_mtx[0]);
mutex_init(&i2c_mtx[1]);
}
int i2c_wr(int bus, unsigned char slave, int address, int len, const unsigned char *data)
{
i2c_on(bus);
long timeout = USEC_TIMER + 20000;
/* START */
IICDS(bus) = slave & ~1;
IICSTAT(bus) = 0xF0;
IICCON(bus) = 0xB3;
while ((IICCON(bus) & 0x10) == 0)
if (TIME_AFTER(USEC_TIMER, timeout))
return 1;
if (address >= 0) {
/* write address */
IICDS(bus) = address;
IICCON(bus) = 0xB3;
while ((IICCON(bus) & 0x10) == 0)
if (TIME_AFTER(USEC_TIMER, timeout))
return 2;
}
/* write data */
while (len--) {
IICDS(bus) = *data++;
IICCON(bus) = 0xB3;
while ((IICCON(bus) & 0x10) == 0)
if (TIME_AFTER(USEC_TIMER, timeout))
return 4;
}
/* STOP */
IICSTAT(bus) = 0xD0;
IICCON(bus) = 0xB3;
while ((IICSTAT(bus) & (1 << 5)) != 0)
if (TIME_AFTER(USEC_TIMER, timeout))
return 5;
i2c_off(bus);
return 0;
}
int i2c_rd(int bus, unsigned char slave, int address, int len, unsigned char *data)
{
i2c_on(bus);
long timeout = USEC_TIMER + 20000;
if (address >= 0) {
/* START */
IICDS(bus) = slave & ~1;
IICSTAT(bus) = 0xF0;
IICCON(bus) = 0xB3;
while ((IICCON(bus) & 0x10) == 0)
if (TIME_AFTER(USEC_TIMER, timeout))
return 1;
/* write address */
IICDS(bus) = address;
IICCON(bus) = 0xB3;
while ((IICCON(bus) & 0x10) == 0)
if (TIME_AFTER(USEC_TIMER, timeout))
return 2;
}
/* (repeated) START */
IICDS(bus) = slave | 1;
IICSTAT(bus) = 0xB0;
IICCON(bus) = 0xB3;
while ((IICCON(bus) & 0x10) == 0)
if (TIME_AFTER(USEC_TIMER, timeout))
return 3;
while (len--) {
IICCON(bus) = (len == 0) ? 0x33 : 0xB3; /* NAK or ACK */
while ((IICCON(bus) & 0x10) == 0)
if (TIME_AFTER(USEC_TIMER, timeout))
return 4;
*data++ = IICDS(bus);
}
/* STOP */
IICSTAT(bus) = 0x90;
IICCON(bus) = 0xB3;
while ((IICSTAT(bus) & (1 << 5)) != 0)
if (TIME_AFTER(USEC_TIMER, timeout))
return 5;
i2c_off(bus);
return 0;
}
int i2c_write(int bus, unsigned char slave, int address, int len, const unsigned char *data)
{
int ret;
mutex_lock(&i2c_mtx[bus]);
ret = i2c_wr(bus, slave, address, len, data);
mutex_unlock(&i2c_mtx[bus]);
return ret;
}
int i2c_read(int bus, unsigned char slave, int address, int len, unsigned char *data)
{
int ret;
mutex_lock(&i2c_mtx[bus]);
ret = i2c_rd(bus, slave, address, len, data);
mutex_unlock(&i2c_mtx[bus]);
return ret;
}
|
