1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
|
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2009 by Bertrik Sikken
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include <stdbool.h>
#include "config.h"
#include "backlight.h"
#include "backlight-target.h"
#include "system.h"
/*
Backlight driver using the PWM mode of a hardware timer.
The PWM duty cycle depends exponentially on the configured brightness
level. This makes the brightness curve more linear to the human eye.
*/
void _backlight_set_brightness(int brightness)
{
/* pwm = round(sqrt(2)**x), where brightness level x = 1..16 */
static const unsigned int logtable[] =
{1, 2, 3, 4, 6, 8, 11, 16, 23, 32, 45, 64, 91, 128, 181, 256};
/* set PWM width */
TCDATA0 = logtable[brightness];
}
void _backlight_on(void)
{
/* configure backlight pin P0.2 as timer PWM output */
PCON0 = ((PCON0 & ~(3 << 4)) | (2 << 4));
_backlight_set_brightness(backlight_brightness);
}
void _backlight_off(void)
{
/* configure backlight pin P0.2 as GPIO and switch off */
PCON0 = ((PCON0 & ~(3 << 4)) | (1 << 4));
PDAT0 &= ~(1 << 2);
}
bool _backlight_init(void)
{
/* enable timer clock */
PWRCON &= ~(1 << 4);
/* configure timer */
TCCMD = (1 << 1); /* TC_CLR */
TCCON = (0 << 13) | /* TC_INT1_EN */
(0 << 12) | /* TC_INT0_EN */
(1 << 11) | /* TC_START */
(3 << 8) | /* TC_CS = PCLK / 64 */
(1 << 4); /* TC_MODE_SEL = PWM mode */
TCDATA1 = 256; /* set PWM period */
TCPRE = 20; /* prescaler */
TCCMD = (1 << 0); /* TC_EN */
_backlight_on();
return true;
}
|
