blob: 49a69d1a111bf3052c31f8335af4ac3211bc1a1f (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
|
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Driver for AS3514 audio codec
*
* Copyright (c) 2007 Daniel Ankers
* Copyright (c) 2007 Christian Gmeiner
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "cpu.h"
#include "system.h"
#include "audiohw.h"
#include "i2s.h"
#include "ascodec-target.h"
/*
* Initialise the PP I2C and I2S.
*/
void audiohw_init(void)
{
/* normal outputs for CDI and I2S pin groups */
DEV_INIT2 &= ~0x300;
/*mini2?*/
DEV_INIT1 &=~0x3000000;
/*mini2?*/
/* I2S device reset */
DEV_RS |= DEV_I2S;
DEV_RS &=~DEV_I2S;
/* I2S device enable */
DEV_EN |= DEV_I2S;
/* enable external dev clock clocks */
DEV_EN |= DEV_EXTCLOCKS;
/* external dev clock to 24MHz */
outl(inl(0x70000018) & ~0xc, 0x70000018);
#ifdef SANSA_E200
/* Prevent pops on startup */
GPIOG_ENABLE |= 0x08;
GPIO_SET_BITWISE(GPIOG_OUTPUT_VAL, 0x08);
GPIOG_OUTPUT_EN |= 0x08;
#endif
i2s_reset();
audiohw_preinit();
}
void ascodec_suppressor_on(bool on)
{
/* CHECK: Good for c200 too? */
#ifdef SANSA_E200
if (on) {
/* Set pop prevention */
GPIO_SET_BITWISE(GPIOG_OUTPUT_VAL, 0x08);
} else {
/* Release pop prevention */
GPIO_CLEAR_BITWISE(GPIOG_OUTPUT_VAL, 0x08);
}
#else
(void)on;
#endif
}
|
