1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
|
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2004 by Jens Arnold
* Based on the work of Alan Korr and Jörg Hohensohn
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#if CONFIG_CPU == SH7034
#define LCDR (PBDR_ADDR+1)
#ifdef HAVE_LCD_CHARCELLS
#define LCD_DS 1 /* PB0 = 1 --- 0001 --- LCD-DS */
#define LCD_CS 2 /* PB1 = 1 --- 0010 --- /LCD-CS */
#define LCD_SD 4 /* PB2 = 1 --- 0100 --- LCD-SD */
#define LCD_SC 8 /* PB3 = 1 --- 1000 --- LCD-SC */
#else
#define LCD_SD 1 /* PB0 = 1 --- 0001 */
#define LCD_SC 2 /* PB1 = 1 --- 0010 */
#define LCD_RS 4 /* PB2 = 1 --- 0100 */
#define LCD_CS 8 /* PB3 = 1 --- 1000 */
#define LCD_DS LCD_RS
#endif
/*
* About /CS,DS,SC,SD
* ------------------
*
* LCD on JBP and JBR uses a SPI protocol to receive orders (SDA and SCK lines)
*
* - /CS -> Chip Selection line :
* 0 : LCD chipset is activated.
* - DS -> Data Selection line, latched at the rising edge
* of the 8th serial clock (*) :
* 0 : instruction register,
* 1 : data register;
* - SC -> Serial Clock line (SDA).
* - SD -> Serial Data line (SCK), latched at the rising edge
* of each serial clock (*).
*
* _ _
* /CS \ /
* \______________________________________________________/
* _____ ____ ____ ____ ____ ____ ____ ____ ____ _____
* SD \/ D7 \/ D6 \/ D5 \/ D4 \/ D3 \/ D2 \/ D1 \/ D0 \/
* _____/\____/\____/\____/\____/\____/\____/\____/\____/\_____
*
* _____ _ _ _ _ _ _ _ ________
* SC \ * \ * \ * \ * \ * \ * \ * \ *
* \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
* _ _________________________________________________________
* DS \/
* _/\_________________________________________________________
*
*/
.section .icode,"ax",@progbits
.align 2
.global _lcd_write_command
.type _lcd_write_command,@function
/* Write a command byte to the lcd controller
*
* Arguments:
* r4 - data byte (int)
*
* Register usage:
* r0 - scratch
* r1 - data byte (copied)
* r2 - precalculated port value (CS, DS and SC low, SD high),
* negated (neg)!
* r3 - lcd port address
* r5 - 1 (byte count for reuse of the loop in _lcd_write_data)
*/
_lcd_write_command:
mov.l .lcdr,r3 /* put lcd data port address in r3 */
mov r4,r1 /* copy data byte to r1 */
mov #1,r5 /* set byte count to 1 (!) */
/* This code will fail if an interrupt changes the contents of PBDRL.
* If so, we must disable the interrupt here. */
mov.b @r3,r0 /* r0 = PBDRL */
or #(LCD_SD),r0 /* r0 |= LCD_SD */
and #(~(LCD_CS|LCD_DS|LCD_SC)),r0 /* r0 &= ~(LCD_CS|LCD_DS|LCD_SC) */
bra .single_transfer /* jump into the transfer loop */
neg r0,r2 /* r2 = 0 - r0 */
.align 2
.global _lcd_write_data
.type _lcd_write_data,@function
/* A high performance function to write data to the display,
* one or multiple bytes.
*
* Arguments:
* r4 - data address
* r5 - byte count
*
* Register usage:
* r0 - scratch
* r1 - current data byte
* r2 - precalculated port value (CS and SC low, DS and SD high),
* negated (neg)!
* r3 - lcd port address
*/
_lcd_write_data:
mov.l .lcdr,r3 /* put lcd data port address in r3 */
nop /* align here */
/* This code will fail if an interrupt changes the contents of PBDRL.
* If so, we must disable the interrupt here. If disabling interrupts
* for a long time (~9200 clks = ~830 µs for transferring 112 bytes on
* recorders)is undesirable, the loop has to be rewritten to
* disable/precalculate/transfer/enable for each iteration. However,
* this would significantly decrease performance. */
mov.b @r3,r0 /* r0 = PBDRL */
or #(LCD_DS|LCD_SD),r0 /* r0 |= LCD_DS|LCD_SD */
and #(~(LCD_CS|LCD_SC)),r0 /* r0 &= ~(LCD_CS|LCD_SC) */
neg r0,r2 /* r2 = 0 - r0 */
#ifdef HAVE_LCD_CHARCELLS
/* optimized player version, also works for recorders */
.align 2
.multi_transfer:
mov.b @r4+,r1 /* load data byte from memory */
.single_transfer:
shll16 r1 /* shift data to most significant byte */
shll8 r1
shll r1 /* shift the msb into carry */
neg r2,r0 /* copy negated precalculated port value */
/* uses neg here for compatibility with recorder version */
bt 1f /* data bit = 1? */
and #(~LCD_SD),r0 /* no: r0 &= ~LCD_SD */
1:
shll r1 /* next shift here for alignment */
mov.b r0,@r3 /* set data to port */
or #(LCD_SC),r0 /* rise SC (independent of SD level) */
mov.b r0,@r3 /* set to port */
neg r2,r0
bt 1f
and #(~LCD_SD),r0
1:
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
shll r1
neg r2,r0
bt 1f
and #(~LCD_SD),r0
1:
shll r1
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
neg r2,r0
bt 1f
and #(~LCD_SD),r0
1:
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
shll r1
neg r2,r0
bt 1f
and #(~LCD_SD),r0
1:
shll r1
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
neg r2,r0
bt 1f
and #(~LCD_SD),r0
1:
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
shll r1
neg r2,r0
bt 1f
and #(~LCD_SD),r0
1:
shll r1
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
neg r2,r0
bt 1f
and #(~LCD_SD),r0
1:
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
#else /* HAVE_LCD_CHARCELLS */
/* further optimized version, exploits that SD is on bit 0 for recorders */
.align 2
.multi_transfer:
mov.b @r4+,r1 /* load data byte from memory */
nop
.single_transfer:
shll16 r1 /* shift data to most significant byte */
shll8 r1
not r1,r1 /* and invert for use with negc */
shll r1 /* shift the MSB into carry */
negc r2,r0 /* carry to SD, SC low */
shll r1 /* next shift here for alignment */
mov.b r0,@r3 /* set data to port */
or #(LCD_SC),r0 /* rise SC (independent of SD level) */
mov.b r0,@r3 /* set to port */
negc r2,r0
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
shll r1
negc r2,r0
shll r1
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
negc r2,r0
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
shll r1
negc r2,r0
shll r1
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
negc r2,r0
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
shll r1
negc r2,r0
shll r1
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
negc r2,r0
mov.b r0,@r3
or #(LCD_SC),r0
mov.b r0,@r3
#endif /* HAVE_LCD_CHARCELLS */
add #-1,r5 /* decrease byte count */
tst r5,r5 /* r5 == 0 ? */
bf .multi_transfer /* no: next iteration */
or #(LCD_CS|LCD_DS|LCD_SD|LCD_SC),r0 /* restore port */
rts
mov.b r0,@r3
/* This is the place to reenable the interrupts, if we have disabled
* them. See above. */
.align 2
.lcdr:
.long LCDR
.end:
.size _lcd_write_command,.end-_lcd_write_command
#elif CONFIG_CPU == MCF5249
.section .icode,"ax",@progbits
.align 2
.global lcd_write_command
.type lcd_write_command,@function
lcd_write_command:
move.l (4,%sp),%d0
lea MBAR2,%a1
move.l #~8,%d1
and.l %d1,(0xb4,%a1)
move.w %d0,0xf0000000
rts
.align 2
.global lcd_write_command_ex
.type lcd_write_command_ex,@function
lcd_write_command_ex:
lea MBAR2,%a1
move.l (4,%sp),%d0 /* Command */
move.l #~8,%d1 /* Set A0 = 0 */
and.l %d1,(0xb4,%a1)
move.w %d0,0xf0000000 /* Write to LCD */
not.l %d1 /* Set A0 = 1 */
or.l %d1,(0xb4,%a1)
move.l (8,%sp),%d0 /* Data */
cmp.l #0xffffffff,%d0 /* -1? */
beq.b .last
move.w %d0,0xf0000000 /* Write to LCD */
move.l (12,%sp),%d0 /* Data */
cmp.l #0xffffffff,%d0 /* -1? */
beq.b .last
move.w %d0,0xf0000000 /* Write to LCD */
.last:
rts
.align 2
.global lcd_write_data
.type lcd_write_data,@function
lcd_write_data:
move.l (4,%sp),%a0 /* Data pointer */
move.l (8,%sp),%d0 /* Length */
lea MBAR2,%a1
moveq #8,%d1
or.l %d1,(0xb4,%a1)
.loop:
move.b (%a0)+,%d1
move.w %d1,0xf0000000
subq.l #1,%d0
bne .loop
rts
#endif
|
