1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
|
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2005 by Andy Young
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "cpu.h"
#include "kernel.h"
#include "logf.h"
#include "system.h"
#include "i2c-coldfire.h"
#define I2C_DEVICE_1 ((volatile unsigned char *)&MADR)
#define I2C_DEVICE_2 ((volatile unsigned char *)&MADR2)
/* Local functions definitions */
static int i2c_write_byte(int device, unsigned char data);
static int i2c_gen_start(int device);
static void i2c_gen_stop(int device);
static volatile unsigned char *i2c_get_addr(int device);
/* Public functions */
void i2c_init(void)
{
#ifdef IRIVER_H100_SERIES
/* The FM chip has no pullup for SCL, so we have to bit-bang the
I2C for that one. */
or_l(0x00800000, &GPIO1_OUT);
or_l(0x00000008, &GPIO_OUT);
or_l(0x00800000, &GPIO1_ENABLE);
or_l(0x00000008, &GPIO_ENABLE);
or_l(0x00800000, &GPIO1_FUNCTION);
or_l(0x00000008, &GPIO_FUNCTION);
#elif defined(IRIVER_H300_SERIES)
/* The FM chip has no pullup for SCL, so we have to bit-bang the
I2C for that one. */
or_l(0x03000000, &GPIO1_OUT);
or_l(0x03000000, &GPIO1_ENABLE);
or_l(0x03000000, &GPIO1_FUNCTION);
#endif
/* I2C Clock divisor = 160 => 124.1556 MHz / 2 / 160 = 388.08 kHz */
MFDR = 0x0d;
MFDR2 = 0x0d;
#ifdef IAUDIO_X5
MBCR = IEN; /* Enable interface */
#endif
#if (CONFIG_KEYPAD == IRIVER_H100_PAD) || (CONFIG_KEYPAD == IRIVER_H300_PAD)
/* Audio Codec */
MBDR = 0; /* iRiver firmware does this */
MBCR = IEN; /* Enable interface */
#endif
}
void i2c_close(void)
{
MBCR = 0;
}
/**
* Writes bytes to the selected device.
*
* Use device=1 for bus 1 at 0x40000280
* Use device=2 for bus 2 at 0x80000440
*
* Returns number of bytes successfully send or -1 if START failed
*/
int i2c_write(int device, unsigned char *buf, int count)
{
int i;
int rc;
rc = i2c_gen_start(device);
if (rc < 0)
{
logf("i2c: gen_start failed (d=%d)", device);
return rc*10 - 1;
}
for (i=0; i<count; i++)
{
rc = i2c_write_byte(device, buf[i]);
if (rc < 0)
{
logf("i2c: write failed at (d=%d,i=%d)", device, i);
return rc*10 - 2;
}
}
i2c_gen_stop(device);
return count;
}
/* Write a byte to the interface, returns 0 on success, -1 otherwise. */
int i2c_write_byte(int device, unsigned char data)
{
volatile unsigned char *regs = i2c_get_addr(device);
long count = 0;
regs[O_MBDR] = data; /* Write data byte */
/* Wait for bus busy */
while (!(regs[O_MBSR] & IBB) && count < MAX_LOOP)
{
yield();
count++;
}
if (count >= MAX_LOOP)
return -1;
count = 0;
/* Wait for interrupt flag */
while (!(regs[O_MBSR] & IFF) && count < MAX_LOOP)
{
yield();
count++;
}
if (count >= MAX_LOOP)
return -2;
regs[O_MBSR] &= ~IFF; /* Clear interrupt flag */
if (!(regs[O_MBSR] & ICF)) /* Check that transfer is complete */
return -3;
if (regs[O_MBSR] & RXAK) /* Check that the byte has been ACKed */
return -4;
return 0;
}
/* Returns 0 on success, -1 on failure */
int i2c_gen_start(int device)
{
volatile unsigned char *regs = i2c_get_addr(device);
long count = 0;
/* Wait for bus to become free */
while ((regs[O_MBSR] & IBB) && (count < MAX_LOOP))
{
yield();
count++;
}
if (count >= MAX_LOOP)
return -1;
regs[O_MBCR] |= MSTA | MTX; /* Generate START */
return 0;
}
void i2c_gen_stop(int device)
{
volatile unsigned char *regs = i2c_get_addr(device);
regs[O_MBCR] &= ~MSTA; /* Clear MSTA to generate STOP */
}
volatile unsigned char *i2c_get_addr(int device)
{
if (device == 1)
return I2C_DEVICE_1;
return I2C_DEVICE_2;
}
|
