summaryrefslogtreecommitdiff
path: root/firmware
AgeCommit message (Expand)Author
2008-04-16Simpilify the uncached buffer allocation for the USB stack using NOCACHEBSS_A...Michael Sevakis
2008-04-16Some general housekeeping. Fixed a few yellows, made the volume buttons work ...Will Robertson
2008-04-15m:robe 100 - enable setting for buttonlight brightnessRobert Kukla
2008-04-15Use real ARM 11 instructions for cache operations. Probably will factor out l...Michael Sevakis
2008-04-15FS#8898 - Prefix AS3514 registers with AS3514_Bertrik Sikken
2008-04-15Kill some D2 yellows with a simplistic Rolo implementation and NAND driver cl...Rob Purchase
2008-04-15Fixed FS#7849Bertrik Sikken
2008-04-15Fix some red.Steve Bavin
2008-04-15Kill warnings that annoy me when building for Gigabeat S.Michael Sevakis
2008-04-15Make the gigabeat S bootloader compile again. Don't know if it still works.Michael Sevakis
2008-04-15Make the transparent bitmaps work on Gigabeat S.Michael Sevakis
2008-04-15woops... fix red and some svn keywords.Jonathan Gordon
2008-04-15Setup the touchpads to have two modes - stylus and button - and set them in b...Jonathan Gordon
2008-04-14Undo r17095. A bug report clearly showed this power supply is also needed for...Andree Buschmann
2008-04-14Gigabeat S: Make ADC battery voltage reading correct. Tiny tweak to ADC drive...Michael Sevakis
2008-04-14Oops...simple math proves elusive at times. Get the array calcs right.Michael Sevakis
2008-04-13ADC driver for Gigabeat S - a bit on the general side for now. Needs to have ...Michael Sevakis
2008-04-13only reconnect mass storage if there is actually an active usb connection, wi...Frank Gevaerts
2008-04-13ASM optimization for fiq_playback(). Saves about 0.4MHz of CPU while playback...Andree Buschmann
2008-04-13Further power saving for iPod Video (FS#8603). Do not enable D2REGC1 voltage ...Andree Buschmann
2008-04-13Charger detection for Gigabeat SNils Wallménius
2008-04-12Refine information and macros for clock skipping. Not functional changes.Jens Arnold
2008-04-12Fix cut'n'pasterelated yellows.Rob Purchase
2008-04-12D2: Charging detection, plus basic PCF50606 interrupt handler.Rob Purchase
2008-04-12Make a couple of private functions staticNils Wallménius
2008-04-12Add GPIO manager. Get the PMIC interrupt handling working (along with power b...Michael Sevakis
2008-04-12D2: Implement battery voltage readout from PCF50606 (levels not yet calibrate...Rob Purchase
2008-04-12Move a function to gwps-common.c because it belongs thereNils Wallménius
2008-04-12LCD drivers: * Automatically optimise horizontal and vertical lines drawn via...Jens Arnold
2008-04-12FS#8871 by Tomasz Wasilczyk, avoid negative runtime estimation (that would la...Nils Wallménius
2008-04-12Big oops. Fix enum spi_module_number to set right enum values. :p.Michael Sevakis
2008-04-11D2: Remove USB detection as it's not actually on GPIOC26 (that's a charging i...Rob Purchase
2008-04-11Add a "View I/O Ports" screen for imx31. Show all GPIO contents.Michael Sevakis
2008-04-11iPod Video 30Gig doesn't seem to need the ata locking hack so we'll just atte...Michael Sevakis
2008-04-11Serial driver for imx31. Perhaps not 100% but maybe 80-90% (future developmen...Michael Sevakis
2008-04-10Properly clear clear-on-write bits in the PP502x USB controllerBertrik Sikken
2008-04-09D2: Beginnings of a WM8985 driver (based on WM8758, using EQ1 and EQ5 as HW t...Rob Purchase
2008-04-09Fix red + introduce new defines for DM320 targetsMaurus Cuelenaere
2008-04-09Add DM320 I²C driver, although not (yet) enabled in the sources.Maurus Cuelenaere
2008-04-08D2: Implement power-off by putting the PCF50606 to sleep (and reduce timeout ...Rob Purchase
2008-04-08D2: Update dual boot to use the hold switch. Update bootloader to show messag...Rob Purchase
2008-04-07Make the TCC780x ADC driver work again in the bootloader.Rob Purchase
2008-04-07Make the greyscale library work on the m:robe 100. Testing on target done by ...Jens Arnold
2008-04-07Some more debug output disabling.Nicolas Pennequin
2008-04-07explicitly align the ibss section by adjusting _iramend - fixes hang on m:rob...Robert Kukla
2008-04-07Remove some more simulator debugging output.Steve Bavin
2008-04-07Hopefully fix FS#8506 (OF cant be loaded on some PP targets). also hopefully ...Jonathan Gordon
2008-04-07Wow. Fix those irq #defines for ARM and use the right one in power-c200_e200....Michael Sevakis
2008-04-07Better sansa shutdown sequence in power_off.Michael Sevakis
2008-04-07Save a couple of bytes by using moveq.l where possible.Jens Arnold
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 08:00:03 +0000