Age | Commit message (Collapse) | Author |
|
i2c clock frequency uses pclk as reference, not plla
i2c clock divider is only 10 bits, not 16
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20929 a1c6a512-1295-4272-9138-f99709370657
|
|
defined in the tuner driver's header
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20926 a1c6a512-1295-4272-9138-f99709370657
|
|
Inline the 2 uses, and use a preprocessor sanity check for identification frequency
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20924 a1c6a512-1295-4272-9138-f99709370657
|
|
Fix CGU_DBOP setting
Set PCLK to the exact frequency (62MHz, not the maximal frequency)
Use a better comment for CLK_DIV macro
Use preprocessor safety checks for clock divider sizes to avoid future mistakes (not for SD_IDENT frequency since that check is handled by mci_set_clock_divider)
Use maximal IDE frequency of 66MHz (like OF), not 90MHz like written in AS3525 datasheet. The IDE chip is somehow linked to internal storage, and a too high frequency could affect the storage driver.
Use the same DBOP frequency of 32MHz for all models (like OF, verified clip, fuze, e200v2 and m200v4), compromise between performance and battery life could be added in the future for each target
Performance increase on Sansa Fuze with DBOP freq. set to 64MHz: +12% fps for lcd_update, +1% fps for yuv
Thanks to daytona955 on the forums for his help
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20923 a1c6a512-1295-4272-9138-f99709370657
|
|
in place of the main Apple firmware. This image is only loaded if no rockbox.ipod is found so does not affect current behaviour. The advantage is a small increase in boottime. This patch also adds documentation to bootloader/ipod.c in the form of a comment describing the booting behaviour.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20921 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20920 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20919 a1c6a512-1295-4272-9138-f99709370657
|
|
(thanks to Tomer Shalev, FS#10203)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20914 a1c6a512-1295-4272-9138-f99709370657
|
|
non-bootloader)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20867 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20863 a1c6a512-1295-4272-9138-f99709370657
|
|
RTC time
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20862 a1c6a512-1295-4272-9138-f99709370657
|
|
ascodec.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20861 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20853 a1c6a512-1295-4272-9138-f99709370657
|
|
defined for all targets that have HAVE_ALBUMART. Disable JPEG in PictureFlow and pluginlib album art search with 32KiB plugin buffer until PictureFlow
gets overlay support.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20851 a1c6a512-1295-4272-9138-f99709370657
|
|
BACKLIGHT_NO_FADING.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20850 a1c6a512-1295-4272-9138-f99709370657
|
|
dangerous and shutoff voltages are taken care of, carge discharge curves are better modeled.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20849 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20847 a1c6a512-1295-4272-9138-f99709370657
|
|
inacurate reads, add support for dynamic frequency (was running at 87.5 MHz, now it runs at 175 MHz when boosted), disable clock to unneded modules (decreased power by 20 mA), LCD turnoff now works without graphic glitches, battery ADC read now returns scaled voltage, define backlight fading
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20846 a1c6a512-1295-4272-9138-f99709370657
|
|
the backlight thread to avoid potential concurrency issues.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20834 a1c6a512-1295-4272-9138-f99709370657
|
|
fix as I don't know a better solution yet) :/
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20830 a1c6a512-1295-4272-9138-f99709370657
|
|
backlight-sim.h into a .c too.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20829 a1c6a512-1295-4272-9138-f99709370657
|
|
scroll wheel acceleration on the e200v2 mainly by not decrementing the counter which which causes the acceleration if a wheel read was missed due to lcd operation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20822 a1c6a512-1295-4272-9138-f99709370657
|
|
fading at all and being and being called too early for backlight always of on PWM fading targets. Also, clean up the code a bit by renaming the function that initiates fading on PWM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20820 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20819 a1c6a512-1295-4272-9138-f99709370657
|
|
hack to get lcd_sleep working/called again, fix the panic handler so that it waits for the power button to be pressed instead of freezing the player
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20818 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20809 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20806 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20801 a1c6a512-1295-4272-9138-f99709370657
|
|
weirdnesses with button reading.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20800 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20796 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20795 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20794 a1c6a512-1295-4272-9138-f99709370657
|
|
and move it into backlight.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20793 a1c6a512-1295-4272-9138-f99709370657
|
|
timeout in the backlight thread.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20792 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20791 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20790 a1c6a512-1295-4272-9138-f99709370657
|
|
get_current_timeout code. No functional change.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20789 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20788 a1c6a512-1295-4272-9138-f99709370657
|
|
in the bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20787 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20785 a1c6a512-1295-4272-9138-f99709370657
|
|
buttonlight_timeout to be more inline with backlight, and use a #define instead of a const variable for !HAVE_LCD_SLEEP_SETTING (no functional changes)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20784 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20779 a1c6a512-1295-4272-9138-f99709370657
|
|
settings menu) by ensuring that all calls of target-specific backlight code happen from backlight thread
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20778 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20774 a1c6a512-1295-4272-9138-f99709370657
|
|
from flash
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20769 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20767 a1c6a512-1295-4272-9138-f99709370657
|
|
mpegplayer work correct now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20766 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20761 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20759 a1c6a512-1295-4272-9138-f99709370657
|
|
(sometimes FFFF prepended), due to sign-extension. Switch to unsigned short to fix it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20757 a1c6a512-1295-4272-9138-f99709370657
|