FS#10118 & FS#10165 : lcd_blit_yuv() for Sansa Fuze & Sansa e200v2

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20919 a1c6a512-1295-4272-9138-f99709370657

4 files changed, 676 insertions, 47 deletions

diff --git a/firmware/SOURCES b/firmware/SOURCES
index d96dc8c8a9..7a00bb903a 100644
--- a/firmware/SOURCES
+++ b/firmware/SOURCES
@@ -1108,6 +1108,7 @@ target/arm/as3525/sansa-clip/powermgmt-clip.c
 #ifdef SANSA_E200V2
 #ifndef SIMULATOR
 target/arm/as3525/sansa-e200v2/lcd-e200v2.c
+target/arm/as3525/lcd-as-e200v2-fuze.S
 target/arm/as3525/sansa-e200v2/button-e200v2.c
 target/arm/as3525/backlight-e200v2-fuze.c
 #ifndef BOOTLOADER
@@ -1142,6 +1143,7 @@ target/arm/as3525/sansa-m200v4/powermgmt-m200v4.c
 #ifndef SIMULATOR
 target/arm/as3525/sansa-fuze/button-fuze.c
 target/arm/as3525/sansa-fuze/lcd-fuze.c
+target/arm/as3525/lcd-as-e200v2-fuze.S
 target/arm/as3525/backlight-e200v2-fuze.c
 #ifndef BOOTLOADER
 target/arm/as3525/powermgmt-as3525.c
diff --git a/firmware/target/arm/as3525/lcd-as-e200v2-fuze.S b/firmware/target/arm/as3525/lcd-as-e200v2-fuze.S
new file mode 100644
index 0000000000..254816cd0e
--- /dev/null
+++ b/firmware/target/arm/as3525/lcd-as-e200v2-fuze.S
@@ -0,0 +1,501 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2007 by Jens Arnold
+ * Heavily based on lcd-as-memframe.c by Michael Sevakis
+ * Adapted for Sansa Fuze/e200v2 by Rafaël Carré
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "config.h"
+#include "cpu.h"
+
+#define DBOP_BUSY (1<<10)
+
+/****************************************************************************
+ * void lcd_write_yuv_420_lines(unsigned char const * const src[3],
+ *                              int width,
+ *                              int stride);
+ *
+ *   |R|   |1.000000 -0.000001  1.402000| |Y'|
+ *   |G| = |1.000000 -0.334136 -0.714136| |Pb|
+ *   |B|   |1.000000  1.772000  0.000000| |Pr|
+ *   Scaled, normalized, rounded and tweaked to yield RGB 565:
+ *   |R|   |74   0 101| |Y' -  16| >> 9
+ *   |G| = |74 -24 -51| |Cb - 128| >> 8
+ *   |B|   |74 128   0| |Cr - 128| >> 9
+ *
+ * Write four RGB565 pixels in the following order on each loop:
+ * 1 3 + > down
+ * 2 4 \/ left
+ */
+    .section    .icode, "ax", %progbits
+    .align      2
+    .global     lcd_write_yuv420_lines
+    .type       lcd_write_yuv420_lines, %function
+lcd_write_yuv420_lines:
+                                        @ r0 = yuv_src
+                                        @ r1 = width
+                                        @ r2 = stride
+    stmfd       sp!, { r4-r12 }         @ save non-scratch
+    ldmia       r0, { r4, r5, r6 }      @ r4 = yuv_src[0] = Y'_p
+                                        @ r5 = yuv_src[1] = Cb_p
+                                        @ r6 = yuv_src[2] = Cr_p
+                                        @ r0 = scratch
+    sub         r2, r2, #1              @
+    mov         r3, #0xC8000000         @
+    orr         r3, r3, #0x120000       @ r3 = DBOP_BASE
+10: @ loop line                         @
+    ldrb        r7, [r4], #1            @ r7 = *Y'_p++;
+    ldrb        r8, [r5], #1            @ r8 = *Cb_p++;
+    ldrb        r9, [r6], #1            @ r9 = *Cr_p++;
+                                        @
+    sub         r7, r7, #16             @ r7 = Y = (Y' - 16)*74
+    add         r12, r7, r7, asl #2     @ actually (Y' - 16)*37 and shift right
+    add         r7, r12, r7, asl #5     @ by one less when adding - same for all
+                                        @
+    sub         r8, r8, #128            @ Cb -= 128
+    sub         r9, r9, #128            @ Cr -= 128
+                                        @
+    add         r10, r9, r9, asl #1     @ r10 = Cr*51 + Cb*24
+    add         r10, r10, r10, asl #4   @
+    add         r10, r10, r8, asl #3    @
+    add         r10, r10, r8, asl #4    @
+                                        @
+    add         r11, r9, r9, asl #2     @ r9 = Cr*101
+    add         r11, r11, r9, asl #5    @
+    add         r9, r11, r9, asl #6     @
+                                        @
+    add         r8, r8, #2              @ r8 = bu = (Cb*128 + 128) >> 8
+    mov         r8, r8, asr #2          @
+    add         r9, r9, #256            @ r9 = rv = (r9 + 256) >> 9
+    mov         r9, r9, asr #9          @
+    rsb         r10, r10, #128          @ r10 = guv = (-r10 + 128) >> 8
+    mov         r10, r10, asr #8        @
+                                        @ compute R, G, and B
+    add         r0, r8, r7, asr #8      @ r0  = b = (Y >> 9) + bu
+    add         r11, r9, r7, asr #8     @ r11 = r = (Y >> 9) + rv
+    add         r7, r10, r7, asr #7     @ r7  = g = (Y >> 8) + guv
+                                        @
+    orr         r12, r0, r11            @ check if clamping is needed...
+    orr         r12, r12, r7, asr #1    @ ...at all
+    cmp         r12, #31                @
+    bls         15f @ no clamp          @
+    cmp         r0, #31                 @ clamp b
+    mvnhi       r0, r0, asr #31         @
+    andhi       r0, r0, #31             @
+    cmp         r11, #31                @ clamp r
+    mvnhi       r11, r11, asr #31       @
+    andhi       r11, r11, #31           @
+    cmp         r7, #63                 @ clamp g
+    mvnhi       r7, r7, asr #31         @
+    andhi       r7, r7, #63             @
+15: @ no clamp                          @
+                                        @
+    ldrb        r12, [r4, r2]           @ r12 = Y' = *(Y'_p + stride)
+                                        @
+    orr         r0, r0, r11, lsl #11    @ r0 = (r << 11) | b
+    orr         r0, r0, r7, lsl #5      @ r0 = (r << 11) | (g << 5) | b
+    strh        r0, [r3, #0x10]         @ write pixel
+1: @ busy                               @
+    ldr         r7, [r3,#0xc]           @ r7 = DBOP_STATUS
+    tst         r7, #DBOP_BUSY          @ fifo not empty?
+    beq         1b                      @
+                                        @
+    sub         r7, r12, #16            @ r7 = Y = (Y' - 16)*74
+    add         r12, r7, r7, asl #2     @
+    add         r7, r12, r7, asl #5     @
+                                        @ compute R, G, and B
+    add         r0, r8, r7, asr #8      @ r0  = b = (Y >> 9) + bu
+    add         r11, r9, r7, asr #8     @ r11 = r = (Y >> 9) + rv
+    add         r7, r10, r7, asr #7     @ r7  = g = (Y >> 8) + guv
+                                        @
+    orr         r12, r0, r11            @ check if clamping is needed...
+    orr         r12, r12, r7, asr #1    @ ...at all
+    cmp         r12, #31                @
+    bls         15f @ no clamp          @
+    cmp         r0, #31                 @ clamp b
+    mvnhi       r0, r0, asr #31         @
+    andhi       r0, r0, #31             @
+    cmp         r11, #31                @ clamp r
+    mvnhi       r11, r11, asr #31       @
+    andhi       r11, r11, #31           @
+    cmp         r7, #63                 @ clamp g
+    mvnhi       r7, r7, asr #31         @
+    andhi       r7, r7, #63             @
+15: @ no clamp                          @
+                                        @
+    ldrb        r12, [r4], #1           @ r12 = Y' = *(Y'_p++)
+                                        @
+    orr         r0, r0, r11, lsl #11    @ r0 = (r << 11) | b
+    orr         r0, r0, r7, lsl #5      @ r0 = (r << 11) | (g << 5) | b
+    strh        r0, [r3, #0x10]         @ write pixel
+1: @ busy                               @
+    ldr         r7, [r3,#0xc]           @ r7 = DBOP_STATUS
+    tst         r7, #DBOP_BUSY          @ fifo not empty?
+    beq         1b                      @
+                                        @
+    sub         r7, r12, #16            @ r7 = Y = (Y' - 16)*74
+    add         r12, r7, r7, asl #2     @
+    add         r7, r12, r7, asl #5     @
+                                        @ compute R, G, and B
+    add         r0, r8, r7, asr #8      @ r0  = b = (Y >> 9) + bu
+    add         r11, r9, r7, asr #8     @ r11 = r = (Y >> 9) + rv
+    add         r7, r10, r7, asr #7     @ r7  = g = (Y >> 8) + guv
+                                        @
+    orr         r12, r0, r11            @ check if clamping is needed...
+    orr         r12, r12, r7, asr #1    @ ...at all
+    cmp         r12, #31                @
+    bls         15f @ no clamp          @
+    cmp         r0, #31                 @ clamp b
+    mvnhi       r0, r0, asr #31         @
+    andhi       r0, r0, #31             @
+    cmp         r11, #31                @ clamp r
+    mvnhi       r11, r11, asr #31       @
+    andhi       r11, r11, #31           @
+    cmp         r7, #63                 @ clamp g
+    mvnhi       r7, r7, asr #31         @
+    andhi       r7, r7, #63             @
+15: @ no clamp                          @
+                                        @
+    ldrb        r12, [r4, r2]           @ r12 = Y' = *(Y'_p + stride)
+                                        @
+                                        @
+    orr         r0, r0, r11, lsl #11    @ r0 = (r << 11) | b
+    orr         r0, r0, r7, lsl #5      @ r0 = (r << 11) | (g << 5) | b
+    strh        r0, [r3, #0x10]         @ write pixel
+1: @ busy                               @
+    ldr         r7, [r3,#0xc]           @ r7 = DBOP_STATUS
+    tst         r7, #DBOP_BUSY          @ fifo not empty?
+    beq         1b                      @
+                                        @
+    sub         r7, r12, #16            @ r7 = Y = (Y' - 16)*74
+    add         r12, r7, r7, asl #2     @
+    add         r7, r12, r7, asl #5     @
+                                        @ compute R, G, and B
+    add         r0, r8, r7, asr #8      @ r0  = b = (Y >> 9) + bu
+    add         r11, r9, r7, asr #8     @ r11 = r = (Y >> 9) + rv
+    add         r7, r10, r7, asr #7     @ r7  = g = (Y >> 8) + guv
+                                        @
+    orr         r12, r0, r11            @ check if clamping is needed...
+    orr         r12, r12, r7, asr #1    @ ...at all
+    cmp         r12, #31                @
+    bls         15f @ no clamp          @
+    cmp         r0, #31                 @ clamp b
+    mvnhi       r0, r0, asr #31         @
+    andhi       r0, r0, #31             @
+    cmp         r11, #31                @ clamp r
+    mvnhi       r11, r11, asr #31       @
+    andhi       r11, r11, #31           @
+    cmp         r7, #63                 @ clamp g
+    mvnhi       r7, r7, asr #31         @
+    andhi       r7, r7, #63             @
+15: @ no clamp                          @
+                                        @
+    orr         r0, r0, r11, lsl #11    @ r0 = (r << 11) | b
+    orr         r0, r0, r7, lsl #5      @ r0 = (r << 11) | (g << 5) | b
+    strh        r0, [r3, #0x10]         @ write pixel
+1: @ busy                               @
+    ldr         r7, [r3,#0xc]           @ r7 = DBOP_STATUS
+    tst         r7, #DBOP_BUSY          @ fifo not empty?
+    beq         1b                      @
+                                        @
+    subs        r1, r1, #2              @ subtract block from width
+    bgt         10b @ loop line         @
+                                        @
+    ldmfd       sp!, { r4-r12 }         @ restore registers and return
+    bx          lr                      @
+    .ltorg                              @ dump constant pool
+    .size   lcd_write_yuv420_lines, .-lcd_write_yuv420_lines
+
+/****************************************************************************
+ * void lcd_write_yuv_420_lines_odither(unsigned char const * const src[3],
+ *                                      int width,
+ *                                      int stride,
+ *                                      int x_screen,
+ *                                      int y_screen);
+ *
+ *   |R|   |1.000000 -0.000001  1.402000| |Y'|
+ *   |G| = |1.000000 -0.334136 -0.714136| |Pb|
+ *   |B|   |1.000000  1.772000  0.000000| |Pr|
+ *   Red scaled at twice g & b but at same precision to place it in correct
+ *   bit position after multiply and leave instruction count lower.
+ *   |R|   |258   0  408| |Y' -  16|
+ *   |G| = |149 -49 -104| |Cb - 128|
+ *   |B|   |149 258    0| |Cr - 128|
+ *
+ * Write four RGB565 pixels in the following order on each loop:
+ * 1 3 + > down
+ * 2 4 \/ left
+ *
+ * Kernel pattern (raw|rotated|use order):
+ * 5 3 4 2   2 6 3 7     row0   row2          > down
+ * 1 7 0 6 | 4 0 5 1 | 2 4 6 0 3 5 7 1 col0     left
+ * 4 2 5 3 | 3 7 2 6 | 3 5 7 1 2 4 6 0 col2  \/
+ * 0 6 1 7   5 1 4 0
+ */
+    .section    .icode, "ax", %progbits
+    .align      2
+    .global     lcd_write_yuv420_lines_odither
+    .type       lcd_write_yuv420_lines_odither, %function
+lcd_write_yuv420_lines_odither:
+                                        @ r0 = yuv_src
+                                        @ r1 = width
+                                        @ r2 = stride
+                                        @ r3 = x_screen
+                                        @ [sp] = y_screen
+    stmfd       sp!, { r4-r12, lr }     @ save non-scratch
+    ldmia       r0, { r4, r5, r6 }      @ r4 = yuv_src[0] = Y'_p
+                                        @ r5 = yuv_src[1] = Cb_p
+                                        @ r6 = yuv_src[2] = Cr_p
+                                        @
+    sub         r2, r2, #1              @
+    ldr         r14, [sp, #40]          @ Line up pattern and kernel quadrant
+    eor         r14, r14, r3            @
+    and         r14, r14, #0x2          @
+    mov         r14, r14, lsl #6        @ 0x00 or 0x80
+    mov         r3, #0xC8000000         @
+    orr         r3, r3, #0x120000       @ r3 = DBOP_BASE
+10: @ loop line                         @
+                                        @
+    ldrb        r7, [r4], #1            @ r7 = *Y'_p++;
+    ldrb        r8, [r5], #1            @ r8 = *Cb_p++;
+    ldrb        r9, [r6], #1            @ r9 = *Cr_p++;
+                                        @
+    eor         r14, r14, #0x80         @ flip pattern quadrant
+                                        @
+    sub         r7, r7, #16             @ r7 = Y = (Y' - 16)*149
+    add         r12, r7, r7, asl #2     @
+    add         r12, r12, r12, asl #4   @
+    add         r7, r12, r7, asl #6     @
+                                        @
+    sub         r8, r8, #128            @ Cb -= 128
+    sub         r9, r9, #128            @ Cr -= 128
+                                        @
+    add         r10, r8, r8, asl #4     @ r10 = guv = Cr*104 + Cb*49
+    add         r10, r10, r8, asl #5    @
+    add         r10, r10, r9, asl #3    @
+    add         r10, r10, r9, asl #5    @
+    add         r10, r10, r9, asl #6    @
+                                        @
+    mov         r8, r8, asl #1          @ r8 = bu = Cb*258
+    add         r8, r8, r8, asl #7      @
+                                        @
+    add         r9, r9, r9, asl #1      @ r9 = rv = Cr*408
+    add         r9, r9, r9, asl #4      @
+    mov         r9, r9, asl #3          @
+                                        @
+                                        @ compute R, G, and B
+    add         r0, r8, r7              @ r0  = b' = Y + bu
+    add         r11, r9, r7, asl #1     @ r11 = r' = Y*2 + rv
+    rsb         r7, r10, r7             @ r7  = g' = Y + guv
+                                        @
+                                        @ r8 = bu, r9 = rv, r10 = guv
+                                        @
+    sub         r12, r0, r0, lsr #5     @ r0 = 31/32*b + b/256
+    add         r0, r12, r0, lsr #8     @
+                                        @
+    sub         r12, r11, r11, lsr #5   @ r11 = 31/32*r + r/256
+    add         r11, r12, r11, lsr #8   @
+                                        @
+    sub         r12, r7, r7, lsr #6     @ r7 = 63/64*g + g/256
+    add         r7, r12, r7, lsr #8     @
+                                        @
+    add         r12, r14, #0x100        @
+                                        @
+    add         r0, r0, r12             @ b = r0 + delta
+    add         r11, r11, r12, lsl #1   @ r = r11 + delta*2
+    add         r7, r7, r12, lsr #1     @ g = r7 + delta/2
+                                        @
+    orr         r12, r0, r11, asr #1    @ check if clamping is needed...
+    orr         r12, r12, r7            @ ...at all
+    movs        r12, r12, asr #15       @
+    beq         15f @ no clamp          @
+    movs        r12, r0, asr #15        @ clamp b
+    mvnne       r0, r12, lsr #15        @
+    andne       r0, r0, #0x7c00         @ mask b only if clamped
+    movs        r12, r11, asr #16       @ clamp r
+    mvnne       r11, r12, lsr #16       @
+    movs        r12, r7, asr #15        @ clamp g
+    mvnne       r7, r12, lsr #15        @
+15: @ no clamp                          @
+                                        @
+    ldrb        r12, [r4, r2]           @ r12 = Y' = *(Y'_p + stride)
+                                        @
+    and         r11, r11, #0xf800       @ pack pixel
+    and         r7, r7, #0x7e00         @ r0 = pixel = (r & 0xf800) |
+    orr         r11, r11, r7, lsr #4    @              ((g & 0x7e00) >> 4) |
+    orr         r0, r11, r0, lsr #10    @              (b >> 10)
+    strh        r0, [r3, #0x10]         @ write pixel
+1: @ busy                               @
+    ldr         r7, [r3,#0xc]           @ r7 = DBOP_STATUS
+    tst         r7, #DBOP_BUSY          @ fifo not empty?
+    beq         1b                      @
+                                        @
+    sub         r7, r12, #16            @ r7 = Y = (Y' - 16)*149
+    add         r12, r7, r7, asl #2     @
+    add         r12, r12, r12, asl #4   @
+    add         r7, r12, r7, asl #6     @
+                                        @ compute R, G, and B
+    add         r0, r8, r7              @ r0  = b' = Y + bu
+    add         r11, r9, r7, asl #1     @ r11 = r' = Y*2 + rv
+    rsb         r7, r10, r7             @ r7  = g' = Y + guv
+                                        @
+    sub         r12, r0, r0, lsr #5     @ r0  = 31/32*b' + b'/256
+    add         r0, r12, r0, lsr #8     @
+                                        @
+    sub         r12, r11, r11, lsr #5   @ r11 = 31/32*r' + r'/256
+    add         r11, r12, r11, lsr #8   @
+                                        @
+    sub         r12, r7, r7, lsr #6     @ r7  = 63/64*g' + g'/256
+    add         r7, r12, r7, lsr #8     @
+                                        @
+    add         r12, r14, #0x200        @
+                                        @
+    add         r0, r0, r12             @ b = r0 + delta
+    add         r11, r11, r12, lsl #1   @ r = r11 + delta*2
+    add         r7, r7, r12, lsr #1     @ g = r7 + delta/2
+                                        @
+    orr         r12, r0, r11, asr #1    @ check if clamping is needed...
+    orr         r12, r12, r7            @ ...at all
+    movs        r12, r12, asr #15       @
+    beq         15f @ no clamp          @
+    movs        r12, r0, asr #15        @ clamp b
+    mvnne       r0, r12, lsr #15        @
+    andne       r0, r0, #0x7c00         @ mask b only if clamped
+    movs        r12, r11, asr #16       @ clamp r
+    mvnne       r11, r12, lsr #16       @
+    movs        r12, r7, asr #15        @ clamp g
+    mvnne       r7, r12, lsr #15        @
+15: @ no clamp                          @
+                                        @
+    ldrb        r12, [r4], #1           @ r12 = Y' = *(Y'_p++)
+
+    and         r11, r11, #0xf800       @ pack pixel
+    and         r7, r7, #0x7e00         @ r0 = pixel = (r & 0xf800) |
+    orr         r11, r11, r7, lsr #4    @              ((g & 0x7e00) >> 4) |
+    orr         r0, r11, r0, lsr #10    @              (b >> 10)
+    strh        r0, [r3, #0x10]         @ write pixel
+1: @ busy                               @
+    ldr         r7, [r3,#0xc]           @ r7 = DBOP_STATUS
+    tst         r7, #DBOP_BUSY          @ fifo not empty?
+    beq         1b                      @
+                                        @
+    sub         r7, r12, #16            @ r7 = Y = (Y' - 16)*149
+    add         r12, r7, r7, asl #2     @
+    add         r12, r12, r12, asl #4   @
+    add         r7, r12, r7, asl #6     @
+                                        @ compute R, G, and B
+    add         r0, r8, r7              @ r0  = b' = Y + bu
+    add         r11, r9, r7, asl #1     @ r11 = r' = Y*2 + rv
+    rsb         r7, r10, r7             @ r7  = g' = Y + guv
+                                        @
+                                        @ r8 = bu, r9 = rv, r10 = guv
+                                        @
+    sub         r12, r0, r0, lsr #5     @ r0  = 31/32*b' + b'/256
+    add         r0, r12, r0, lsr #8     @
+                                        @
+    sub         r12, r11, r11, lsr #5   @ r11 = 31/32*r' + r'/256
+    add         r11, r12, r11, lsr #8   @
+                                        @
+    sub         r12, r7, r7, lsr #6     @ r7  = 63/64*g' + g'/256
+    add         r7, r12, r7, lsr #8     @
+                                        @
+    add         r12, r14, #0x300        @
+                                        @
+    add         r0, r0, r12             @ b = r0 + delta
+    add         r11, r11, r12, lsl #1   @ r = r11 + delta*2
+    add         r7, r7, r12, lsr #1     @ g = r7 + delta/2
+                                        @
+    orr         r12, r0, r11, asr #1    @ check if clamping is needed...
+    orr         r12, r12, r7            @ ...at all
+    movs        r12, r12, asr #15       @
+    beq         15f @ no clamp          @
+    movs        r12, r0, asr #15        @ clamp b
+    mvnne       r0, r12, lsr #15        @
+    andne       r0, r0, #0x7c00         @ mask b only if clamped
+    movs        r12, r11, asr #16       @ clamp r
+    mvnne       r11, r12, lsr #16       @
+    movs        r12, r7, asr #15        @ clamp g
+    mvnne       r7, r12, lsr #15        @
+15: @ no clamp                          @
+                                        @
+    ldrb        r12, [r4, r2]           @ r12 = Y' = *(Y'_p + stride)
+                                        @
+    and         r11, r11, #0xf800       @ pack pixel
+    and         r7, r7, #0x7e00         @ r0 = pixel = (r & 0xf800) |
+    orr         r11, r11, r7, lsr #4    @              ((g & 0x7e00) >> 4) |
+    orr         r0, r11, r0, lsr #10    @              (b >> 10)
+    strh        r0, [r3, #0x10]         @ write pixel
+1: @ busy                               @
+    ldr         r7, [r3,#0xc]           @ r7 = DBOP_STATUS
+    tst         r7, #DBOP_BUSY          @ fifo not empty?
+    beq         1b                      @
+                                        @
+    sub         r7, r12, #16            @ r7 = Y = (Y' - 16)*149
+    add         r12, r7, r7, asl #2     @
+    add         r12, r12, r12, asl #4   @
+    add         r7, r12, r7, asl #6     @
+                                        @ compute R, G, and B
+    add         r0, r8, r7              @ r0  = b' = Y + bu
+    add         r11, r9, r7, asl #1     @ r11 = r' = Y*2 + rv
+    rsb         r7, r10, r7             @ r7  = g' = Y + guv
+                                        @
+    sub         r12, r0, r0, lsr #5     @ r0 = 31/32*b + b/256
+    add         r0, r12, r0, lsr #8     @
+                                        @
+    sub         r12, r11, r11, lsr #5   @ r11 = 31/32*r + r/256
+    add         r11, r12, r11, lsr #8   @
+                                        @
+    sub         r12, r7, r7, lsr #6     @ r7 = 63/64*g + g/256
+    add         r7, r12, r7, lsr #8     @
+                                        @
+    @ This element is zero - use r14    @
+                                        @
+    add         r0, r0, r14             @ b = r0 + delta
+    add         r11, r11, r14, lsl #1   @ r = r11 + delta*2
+    add         r7, r7, r14, lsr #1     @ g = r7 + delta/2
+                                        @
+    orr         r12, r0, r11, asr #1    @ check if clamping is needed...
+    orr         r12, r12, r7            @ ...at all
+    movs        r12, r12, asr #15       @
+    beq         15f @ no clamp          @
+    movs        r12, r0, asr #15        @ clamp b
+    mvnne       r0, r12, lsr #15        @
+    andne       r0, r0, #0x7c00         @ mask b only if clamped
+    movs        r12, r11, asr #16       @ clamp r
+    mvnne       r11, r12, lsr #16       @
+    movs        r12, r7, asr #15        @ clamp g
+    mvnne       r7, r12, lsr #15        @
+15: @ no clamp                          @
+                                        @
+    and         r11, r11, #0xf800       @ pack pixel
+    and         r7, r7, #0x7e00         @ r0 = pixel = (r & 0xf800) |
+    orr         r11, r11, r7, lsr #4    @              ((g & 0x7e00) >> 4) |
+    orr         r0, r11, r0, lsr #10    @              (b >> 10)
+    strh        r0, [r3, #0x10]         @ write pixel
+1: @ busy                               @
+    ldr         r7, [r3,#0xc]           @ r7 = DBOP_STATUS
+    tst         r7, #DBOP_BUSY          @ fifo not empty?
+    beq         1b                      @
+                                        @
+    subs        r1, r1, #2              @ subtract block from width
+    bgt         10b @ loop line         @
+                                        @
+    ldmfd       sp!, { r4-r12, pc }     @ restore registers and return
+    .ltorg                              @ dump constant pool
+    .size   lcd_write_yuv420_lines_odither, .-lcd_write_yuv420_lines_odither
diff --git a/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c b/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c
index 30ba8911ea..ef21893494 100644
--- a/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c
+++ b/firmware/target/arm/as3525/sansa-e200v2/lcd-e200v2.c
@@ -74,7 +74,7 @@ static volatile bool lcd_busy = false;
 #define R_GAMMA_GRAD_ADJ_NEG    0x37
 
 #define R_GAMMA_AMP_ADJ_RES_POS     0x38
-#define R_GAMMA_AMP_AVG_ADJ_RES_NEG 0x39 
+#define R_GAMMA_AMP_AVG_ADJ_RES_NEG 0x39
 
 #define R_GATE_SCAN_POS         0x40
 #define R_VERT_SCROLL_CONTROL   0x41
@@ -89,6 +89,7 @@ static volatile bool lcd_busy = false;
 static unsigned short r_entry_mode = R_ENTRY_MODE_HORZ_NORMAL;
 #define R_ENTRY_MODE_VERT 0x7038
 #define R_ENTRY_MODE_SOLID_VERT  0x1038
+#define R_ENTRY_MODE_VIDEO 0x7020
 
 
 /* Reverse Flag */
@@ -182,7 +183,7 @@ void lcd_set_invert_display(bool yesno)
 void lcd_set_flip(bool yesno)
 {
     display_flipped = yesno;
- 
+
     r_entry_mode = yesno ? R_ENTRY_MODE_HORZ_FLIPPED :
                            R_ENTRY_MODE_HORZ_NORMAL;
 }
@@ -253,13 +254,13 @@ static void _display_on(void)
     /* DC12-10 = 000b: Step-up1 = clock/8,
      * DC02-00 = 000b: Step-up2 = clock/16,
      * VC2-0   = 010b: VciOUT = 0.87 * VciLVL */
-    lcd_write_reg(R_POWER_CONTROL2, 0x0002); 
+    lcd_write_reg(R_POWER_CONTROL2, 0x0002);
 
     /* VRH3-0 = 1000b: Vreg1OUT = REGP * 1.90 */
     lcd_write_reg(R_POWER_CONTROL3, 0x0008);
 
     lcd_delay(40);
-    
+
     lcd_write_reg(R_POWER_CONTROL4, 0x0000); /* VCOMG = 0 */
 
     /* This register is unknown */
@@ -270,8 +271,8 @@ static void _display_on(void)
 
     lcd_delay(10);
 
-    lcd_write_reg(R_POWER_CONTROL2, 0x0000); 
-    lcd_write_reg(R_POWER_CONTROL3, 0x0013); 
+    lcd_write_reg(R_POWER_CONTROL2, 0x0000);
+    lcd_write_reg(R_POWER_CONTROL3, 0x0013);
 
     lcd_delay(20);
 
@@ -296,7 +297,7 @@ static void _display_on(void)
     lcd_write_reg(R_GATE_SCAN_POS, 0);
     lcd_write_reg(R_VERT_SCROLL_CONTROL, 0);
 
-    lcd_window(0, 0, LCD_WIDTH-1, LCD_HEIGHT-1);    
+    lcd_window(0, 0, LCD_WIDTH-1, LCD_HEIGHT-1);
     lcd_write_reg(R_1ST_SCR_DRV_POS, (LCD_HEIGHT-1) << 8);
     lcd_write_reg(R_2ND_SCR_DRV_POS, (LCD_HEIGHT-1) << 8);
 
@@ -356,6 +357,30 @@ bool lcd_active(void)
 
 /*** update functions ***/
 
+static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0;
+
+/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
+extern void lcd_write_yuv420_lines(unsigned char const * const src[3],
+                                   int width,
+                                   int stride);
+extern void lcd_write_yuv420_lines_odither(unsigned char const * const src[3],
+                                           int width,
+                                           int stride,
+                                           int x_screen, /* To align dither pattern */
+                                           int y_screen);
+
+void lcd_yuv_set_options(unsigned options)
+{
+    lcd_yuv_options = options;
+}
+
+static void lcd_window_blit(int xmin, int ymin, int xmax, int ymax)
+{
+    lcd_write_reg(R_HORIZ_RAM_ADDR_POS, ((LCD_WIDTH-1 - xmin) << 8) | (LCD_WIDTH-1 - xmax));
+    lcd_write_reg(R_VERT_RAM_ADDR_POS,  (ymax << 8) | ymin);
+    lcd_write_reg(R_RAM_ADDR_SET,       (ymin << 8) | (LCD_WIDTH-1 - xmin));
+}
+
 /* Performance function to blit a YUV bitmap directly to the LCD
  * src_x, src_y, width and height should be even
  * x, y, width and height have to be within LCD bounds
@@ -364,14 +389,58 @@ void lcd_blit_yuv(unsigned char * const src[3],
                   int src_x, int src_y, int stride,
                   int x, int y, int width, int height)
 {
-    (void)src;
-    (void)src_x;
-    (void)src_y;
-    (void)stride;
-    (void)x;
-    (void)y;
-    (void)width;
-    (void)height;
+    unsigned char const * yuv_src[3];
+    off_t z;
+
+    lcd_busy = true;
+
+    /* Sorry, but width and height must be >= 2 or else */
+    width &= ~1;
+    height >>= 1;
+
+    z = stride*src_y;
+    yuv_src[0] = src[0] + z + src_x;
+    yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1);
+    yuv_src[2] = src[2] + (yuv_src[1] - src[1]);
+
+    lcd_write_reg(R_ENTRY_MODE, R_ENTRY_MODE_VIDEO);
+
+    if (lcd_yuv_options & LCD_YUV_DITHER)
+    {
+        do
+        {
+            lcd_window_blit(y, x, y+1, x+width-1);
+
+            /* Start write to GRAM */
+            lcd_write_cmd(R_WRITE_DATA_2_GRAM);
+
+            lcd_write_yuv420_lines_odither(yuv_src, width, stride, x, y);
+            yuv_src[0] += stride << 1; /* Skip down two luma lines */
+            yuv_src[1] += stride >> 1; /* Skip down one chroma line */
+            yuv_src[2] += stride >> 1;
+            y+=2;
+        }
+        while (--height > 0);
+    }
+    else
+    {
+        do
+        {
+            lcd_window_blit(y, x, y+1, x+width-1);
+
+            /* Start write to GRAM */
+            lcd_write_cmd(R_WRITE_DATA_2_GRAM);
+
+            lcd_write_yuv420_lines(yuv_src, width, stride);
+            yuv_src[0] += stride << 1; /* Skip down two luma lines */
+            yuv_src[1] += stride >> 1; /* Skip down one chroma line */
+            yuv_src[2] += stride >> 1;
+            y+=2;
+        }
+        while (--height > 0);
+    }
+
+    lcd_busy = false;
 }
 
 /* Update the display.
diff --git a/firmware/target/arm/as3525/sansa-fuze/lcd-fuze.c b/firmware/target/arm/as3525/sansa-fuze/lcd-fuze.c
index 3e08ba4dff..141b890861 100644
--- a/firmware/target/arm/as3525/sansa-fuze/lcd-fuze.c
+++ b/firmware/target/arm/as3525/sansa-fuze/lcd-fuze.c
@@ -37,7 +37,9 @@
 #define R_WRITE_DATA_2_GRAM     0x22
 
 #define R_ENTRY_MODE_HORZ 0x7030
+#define R_ENTRY_MODE_VERT 0x7038
 
+static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0;
 static bool display_on = false; /* is the display turned on? */
 static bool display_flipped = false;
 static int xoffset = 20; /* needed for flip */
@@ -189,7 +191,7 @@ void lcd_enable(bool on)
          * avoid irritating flash on backlight on */
         while(delay--);
         lcd_activation_call_hook();
-        
+
     }
     else
     {
@@ -210,22 +212,94 @@ bool lcd_active(void)
 
 /*** update functions ***/
 
-/* Performance function to blit a YUV bitmap directly to the LCD
- * src_x, src_y, width and height should be even
- * x, y, width and height have to be within LCD bounds
- */
+/* Set horizontal window addresses */
+static void lcd_window_x(int xmin, int xmax)
+{
+    xmin += xoffset;
+    xmax += xoffset;
+    lcd_write_reg(0x46, (xmax << 8) | xmin);
+    lcd_write_reg(0x20, xmin);
+}
+
+/* Set vertical window addresses */
+static void lcd_window_y(int ymin, int ymax)
+{
+    lcd_write_reg(0x47, ymax);
+    lcd_write_reg(0x48, ymin);
+    lcd_write_reg(0x21, ymin);
+}
+
+void lcd_yuv_set_options(unsigned options)
+{
+    lcd_yuv_options = options;
+}
+
+/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
+extern void lcd_write_yuv420_lines(unsigned char const * const src[3],
+                                   int width,
+                                   int stride);
+extern void lcd_write_yuv420_lines_odither(unsigned char const * const src[3],
+                                           int width,
+                                           int stride,
+                                           int x_screen, /* To align dither pattern */
+                                           int y_screen);
+/* Performance function to blit a YUV bitmap directly to the LCD */
 void lcd_blit_yuv(unsigned char * const src[3],
                   int src_x, int src_y, int stride,
                   int x, int y, int width, int height)
 {
-    (void)src;
-    (void)src_x;
-    (void)src_y;
-    (void)stride;
-    (void)x;
-    (void)y;
-    (void)width;
-    (void)height;
+    unsigned char const * yuv_src[3];
+    off_t z;
+
+    lcd_busy = true;
+
+    lcd_write_reg(R_ENTRY_MODE, R_ENTRY_MODE_VERT);
+
+    /* Sorry, but width and height must be >= 2 or else */
+    width &= ~1;
+    height >>= 1;
+
+    z = stride*src_y;
+    yuv_src[0] = src[0] + z + src_x;
+    yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1);
+    yuv_src[2] = src[2] + (yuv_src[1] - src[1]);
+
+    lcd_window_x(x, x + width - 1);
+
+    if (lcd_yuv_options & LCD_YUV_DITHER)
+    {
+        do
+        {
+            lcd_window_y(y, y + 1);
+            /* Start write to GRAM */
+            lcd_write_cmd(R_WRITE_DATA_2_GRAM);
+
+            lcd_write_yuv420_lines_odither(yuv_src, width, stride, x, y);
+            yuv_src[0] += stride << 1; /* Skip down two luma lines */
+            yuv_src[1] += stride >> 1; /* Skip down one chroma line */
+            yuv_src[2] += stride >> 1;
+            y += 2;
+        }
+         while (--height > 0);
+    }
+    else
+    {
+        do
+        {
+            lcd_window_y(y, y + 1);
+            /* Start write to GRAM */
+            lcd_write_cmd(R_WRITE_DATA_2_GRAM);
+
+            lcd_write_yuv420_lines(yuv_src, width, stride);
+            yuv_src[0] += stride << 1; /* Skip down two luma lines */
+            yuv_src[1] += stride >> 1; /* Skip down one chroma line */
+            yuv_src[2] += stride >> 1;
+            y += 2;
+        }
+         while (--height > 0);
+    }
+
+    lcd_busy = false;
 }
 
 void lcd_init_device()
@@ -242,23 +316,6 @@ void lcd_init_device()
     _display_on();
 }
 
-/* Set horizontal window addresses */
-void lcd_window_x(int xmin, int xmax)
-{
-    xmin += xoffset;
-    xmax += xoffset;
-    lcd_write_reg(0x46, (xmax << 8) | xmin);
-    lcd_write_reg(0x20, xmin);
-}
-
-/* Set vertical window addresses */
-void lcd_window_y(int ymin, int ymax)
-{
-    lcd_write_reg(0x47, ymax);
-    lcd_write_reg(0x48, ymin);
-    lcd_write_reg(0x21, ymin);
-}
-
 /* Update the display.
    This must be called after all other LCD functions that change the display. */
 void lcd_update(void)
@@ -272,7 +329,7 @@ void lcd_update(void)
     lcd_window_x(0, LCD_WIDTH - 1);
     lcd_window_y(0, LCD_HEIGHT - 1);
 
-    /* Start write to GRAM */    
+    /* Start write to GRAM */
     lcd_write_cmd(R_WRITE_DATA_2_GRAM);
 
     /* Write data */
@@ -313,7 +370,7 @@ void lcd_update_rect(int x, int y, int width, int height)
     lcd_window_x(x, xmax);
     lcd_window_y(y, ymax);
 
-    /* Start write to GRAM */    
+    /* Start write to GRAM */
     lcd_write_cmd(R_WRITE_DATA_2_GRAM);
 
     ptr = (unsigned short *)&lcd_framebuffer[y][x];