index
:
rockbox.git
master
Unnamed repository; edit this file 'description' to name the repository.
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
firmware
/
target
Age
Commit message (
Expand
)
Author
2008-05-15
Forgot about the buttonlights. Removing for now since this will not work pro...
Karl Kurbjun
2008-05-15
Save around a hundred uA - not much, but why not? - No functional change for ...
Karl Kurbjun
2008-05-14
Fix yellows and reds.
Maurus Cuelenaere
2008-05-14
Fix red. No bother with lcd power management calls in bootloader.
Michael Sevakis
2008-05-14
Straigten-out lcd sleeping on Gigabeat F/X. Add a service function to backlig...
Michael Sevakis
2008-05-14
1) Enable USBOTG for ZVM 60GB, even if the driver isn't implemented yet,
Maurus Cuelenaere
2008-05-14
1) Use a separate config-<target>.h for Zen Vision(:M) (60GB)
Maurus Cuelenaere
2008-05-14
Cleanup some unneeded debug code.
Karl Kurbjun
2008-05-14
Reduce power consumed on the F/X by as much as 12% when the LCD is disabled. ...
Karl Kurbjun
2008-05-13
Gigabeat S system setup changes. Unaligned loads/stores on. Mixed-endian supp...
Michael Sevakis
2008-05-13
Commit Zen Vision key patches by Falafel
Maurus Cuelenaere
2008-05-13
Preparing for the Philips SA9200 part 2. Since the SA9200 doesn't have a micr...
Mark Arigo
2008-05-13
Preparing for the Philips SA9200 part 1. Move the Sansa ADC & ATA drivers up ...
Mark Arigo
2008-05-12
Undo r17470 because of regressions in some debug menus.
Andree Buschmann
2008-05-12
Fix for FS#5162. Being able to read scrollwheel action via button_read_device...
Andree Buschmann
2008-05-11
Enable write buffering for the 1MB device memory section. This means using a ...
Michael Sevakis
2008-05-11
Use LTV350QV register definitions
Maurus Cuelenaere
2008-05-10
Fix the bootloader
Karl Kurbjun
2008-05-10
Real fake IRAM by placing .i.... section in the analagous DRAM sections in th...
Michael Sevakis
2008-05-10
Fix high power consumption at powerup.
Karl Kurbjun
2008-05-10
Fix yellow.
Michael Sevakis
2008-05-10
Fix the ARM assembly to ensure that the stack is not used.
Karl Kurbjun
2008-05-10
Bring Gigabeat S bootloader one step close to a release version.
Michael Sevakis
2008-05-09
Remove inner loop from button scanning on Gigabeat S. Requires changing the b...
Michael Sevakis
2008-05-08
Backlight brightness setting for Gigabeat S. Cleanup headers in target backli...
Michael Sevakis
2008-05-08
Add two missing rockbox headers and set svn:eol-style
Nils Wallménius
2008-05-08
Disable clocks for most modules in the imx31l on startup, individual drivers ...
Nils Wallménius
2008-05-08
Oops, it's called mc13783...
Nils Wallménius
2008-05-08
Hehe. Should probably implement ide_powered if implementing ide_power_enable.
Michael Sevakis
2008-05-08
Gigabeat S RoLo: Properly execute firmware copy from an IRAM stub because the...
Michael Sevakis
2008-05-08
Gigabeat S: Put in (so it appears) proper delays for USB PHY reset. Use the a...
Michael Sevakis
2008-05-08
Remove an unneeded #include and a lone "#" on a line (it's early).
Michael Sevakis
2008-05-08
Gigabeat S: Add ATA/IDE power management. Fix parameter order of regmod32 as ...
Michael Sevakis
2008-05-07
Move interrupt clearing up.
Maurus Cuelenaere
2008-05-07
H10: Disable IDE controller when the disk is powered down like on ipods.
Jens Arnold
2008-05-07
Gigabeat S technical correction: Fix instruction order because clean dcache o...
Michael Sevakis
2008-05-06
Gigabeat S: Make sure ATA interface is idle before a reset.
Michael Sevakis
2008-05-05
Remove the last D2 yellows (user timer is not yet implemented).
Rob Purchase
2008-05-05
Of course don't forget the init code..
Maurus Cuelenaere
2008-05-05
Woops, remove debug statements..
Maurus Cuelenaere
2008-05-05
Split up DMA and ATA, but don't enable it (yet).
Maurus Cuelenaere
2008-05-05
Gigabeat S bootloader: 1) Switch order of .vectors to be contiguous with init...
Michael Sevakis
2008-05-05
Gigabeat S: Do the controller timing settings a more cleanly.
Michael Sevakis
2008-05-05
Alarm wake up support for Gigabeat S
Nils Wallménius
2008-05-05
Mind repeat calls to ata_device_init.
Michael Sevakis
2008-05-05
Don't need the extra idle check.
Michael Sevakis
2008-05-05
Gigabeat S: Use the fastest PIO mode the installed drive allows instead of al...
Michael Sevakis
2008-05-05
Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creativ...
Nicolas Pennequin
2008-05-04
Make the H10 bootloader work again. Also fix the same problem that might be a...
Barry Wardell
2008-05-03
Disabled unused ata_led function.
Bertrik Sikken
[next]