summaryrefslogtreecommitdiff
path: root/firmware/target/arm/system-pp502x.c
AgeCommit message (Expand)Author
2008-06-03Rename CPU/COP_INT_CLR to CPU/COP_INT_DIS since it's really a 'write one to d...Michael Sevakis
2008-05-21Philips GoGear SA9200 port. Working bootloader and normal builds, including s...Mark Arigo
2008-05-13Preparing for the Philips SA9200 part 2. Since the SA9200 doesn't have a micr...Mark Arigo
2008-04-19Fix warning.Barry Wardell
2008-04-19FS#8642: Improve boot time on Sansa bootloaders by boosting the CPU. This onl...Barry Wardell
2008-03-31Change the remaining set_interrupt_status usage to the more parsimonious disa...Michael Sevakis
2008-03-21Modification to scale_suspend_core to prevent a potential permanent freezing ...Michael Sevakis
2008-03-19Correct DEV_TIMING for CPUFREQ_DEFAULT. Was changed by fault in former power ...Andree Buschmann
2008-03-08Revert accidental tree commit. Sorry for that.Jens Arnold
2008-03-08No need to have \n here. panicf() won't output it anyway.Jens Arnold
2008-03-04FS#8272 - Erratic reboot behaviour on sansa e200. Makes reboot on USB connect...Barry Wardell
2008-02-24Driver for the Synaptics touchpad on the m:robe 100 based on the 3-wire inter...Mark Arigo
2008-02-10Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded ...Michael Giacomelli
2008-02-03mrobe 100: (1) device reset in system_init is same as H10. (2) make power_off...Mark Arigo
2007-11-26Enable reboot on USB-insert for e200, as it works when done c200-styleDaniel Stenberg
2007-11-22New USB stackBjörn Stenberg
2007-11-20Fix for Nano timing issues, should resolve crashes, data aborts, and Paul Louden
2007-11-08Mini 2nd Gen: Almost doubled LCD update speed when not boosted (68.5->129fps ...Jens Arnold
2007-11-04The GPIO interrupts are split into several port groups on all PP502x versions...Jens Arnold
2007-10-25FS#8023: Use of AS3514 #defines instead of magic values.Barry Wardell
2007-10-16Improved H10 ADC driver. We now do things exactly as the OF does. This includ...Barry Wardell
2007-10-16Finally full multicore support for PortalPlayer 502x targets with an eye towa...Michael Sevakis
2007-10-07Remove a setting of a register during H10 reset that shouldn't have been incl...Michael Sevakis
2007-10-06Unify PCM interface just above the hardware driver level for all targets incl...Michael Sevakis
2007-10-05Stabilize PP5020 targets - tested on H10 5/20GB and iPod Color. Use no interr...Michael Sevakis
2007-10-04PP502x: Make RAM physical addresses uncached. Cache the flash ROM on targets ...Michael Sevakis
2007-10-03I2S buffer level adjustment is not necessary on c200 as there is no memory ma...Jens Arnold
2007-09-30Oops. Don't use outl with the defined register.Michael Sevakis
2007-09-30Add some defines for pp502x. No guarantee as to full accuracy yet but that's ...Michael Sevakis
2007-09-28Commit a subset of the dual core changes that have to do with cache handling,...Michael Sevakis
2007-09-28Fixed a warningBjörn Stenberg
2007-09-28Improved magic by Mark ArigoBjörn Stenberg
2007-09-27Sansa c200: fix system_reboot with some magic from the OF. Reboot to the OF w...Mark Arigo
2007-09-20Fix the sound on the c200 by resetting all devices as done on the e200. Make ...Mark Arigo
2007-09-06Sansa c200 port. Rockbox works with sound. Several features are disabled incl...Mark Arigo
2007-08-27Usb Stack: only setup packet handling, and not enabled by default as there is...Christian Gmeiner
2007-08-01Fix PP502x clock source masking.Jens Arnold
2007-07-31Simplify PP502x clock handling code. The code is almost identical between PP5...Barry Wardell
2007-07-31PP502x: Clock setup cleanup. Barry Wardell
2007-07-31Unify the 3 copies of the PP502x IRQ handler, and don't schedule button inter...Jens Arnold
2007-07-26Clean up PP502x CPU clock setup code and use the full 80MHz when boosted.Jens Arnold
2007-07-26Reenable scaling on Sansa since a reasonable solution to clicks has been found.Michael Sevakis
2007-07-26Stop the occasional crashes (most often 'undefined instruction') on PP5020 (a...Jens Arnold
2007-07-25Remove the hack which read the ipod hardware revision from flash in the bootl...Dave Chapman
2007-07-07Stop the crashes on some PP5022C targets (iPod Video, perhaps also Nano) intr...Jens Arnold
2007-07-03More PP502x clock setup rework. This should fix the freezes on PP5020 once an...Jens Arnold
2007-07-02Improved CPU clock setup for PP502x. PP5020 and PP5022 are not register compa...Jens Arnold
2007-06-30Accept FS#7134 - Sansa: external sd card support by Antonius Hellmann with so...Michael Sevakis
2007-06-17PP5024 (e200): There's more than one HI IRQ bit for enabling GPIO IRQs. Port ...Michael Sevakis
2007-06-03e200: Finally use GPIO IRQs for the buttons...it's IRQ enable bit 33 afterall...Michael Sevakis