Age | Commit message (Expand) | Author |
2010-05-27 | fuzev2: lcd_enable and lcd_invert() work fine | Rafaël Carré |
2010-05-27 | SDL Simulator: Get thread shutdown and properly handled and fix a minor memor... | Michael Sevakis |
2010-05-27 | mark some functions as init functions (discarded after init() has run) | Rafaël Carré |
2010-05-26 | as3525: write irq/fiq handlers in C | Rafaël Carré |
2010-05-24 | Clipv1 battery capacity is 330mAh | Rafaël Carré |
2010-05-24 | Make PCM->driver interface about as simple as it will get. Registered callbac... | Michael Sevakis |
2010-05-22 | rtc_enable_alarm() needs no return value | Rafaël Carré |
2010-05-22 | as3525v2: RTC alarm | Rafaël Carré |
2010-05-22 | fuzev1: don't enable RTC in the bootloader | Rafaël Carré |
2010-05-19 | as3525: don't use IRAM for usb, and avoid usb storage using uncached addresse... | Rafaël Carré |
2010-05-19 | Revert r26060. A better fix was found. The acceleration should be fixed once ... | Thomas Martitz |
2010-05-19 | as3514.c: clean up | Rafaël Carré |
2010-05-18 | Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power ... | Michael Sevakis |
2010-05-18 | Clip+: reboot on USB insert | Rafaël Carré |
2010-05-18 | don't let logf() and DEBUGF() be empty statements | Rafaël Carré |
2010-05-18 | Enable/disable second pll dynamically on usb plugin/remove. | Tobias Diedrich |
2010-05-18 | Build overlay plugins for all targets with PLUGIN_BUFFER <= 0x10000 bytes | Rafaël Carré |
2010-05-18 | as3525 usb: build as3525v2 file based on CONFIG_USBOTG, and fix warnings | Rafaël Carré |
2010-05-18 | plugins: changes for targets with small plugin buffer (Clipv1) | Rafaël Carré |
2010-05-18 | config: revert an embarrassing change. | Amaury Pouly |
2010-05-18 | as3525v2: add usb driver stub, enable usb phy&core init | Amaury Pouly |
2010-05-17 | Clip+: boot to OF if USB is connected | Rafaël Carré |
2010-05-17 | as3514/as3543 fixes | Rafaël Carré |
2010-05-17 | Do s/SWAP_WORDS/ATA_SWAP_WORDS/ to prevent namespace clashes. | Maurus Cuelenaere |
2010-05-17 | HD200 - use optimised read&write routines from ata-as-coldfire.S and drop hd2... | Marcin Bukat |
2010-05-17 | Simplify mpegplayer a bit and use array-based lists rather than linked lists ... | Michael Sevakis |
2010-05-16 | FS#11263 - Radio Art support! %C and %Cl tags work in the radio screen and Ba... | Jonathan Gordon |
2010-05-16 | as3525v1 use an as3515 audio codec/PMU, not an as3517 as previously thought | Rafaël Carré |
2010-05-15 | Gigabeat S: Not defining HAVE_POWEROFF_WHILE_CHARGING is far too disruptive g... | Michael Sevakis |
2010-05-15 | Get checkwps going again, don't mess with sdl in it. | Thomas Martitz |
2010-05-15 | - Move uisimulator/sdl/*.[ch] into the target tree, under firmware/target/hos... | Thomas Martitz |
2010-05-15 | Hopefully finish off the red from r26051. | Michael Sevakis |
2010-05-15 | Hopefully get some green back from r26051. | Michael Sevakis |
2010-05-15 | Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feat... | Michael Sevakis |
2010-05-15 | wm8978: Clean out silly macros. Use 'POS' convention instead for shifted bitf... | Michael Sevakis |
2010-05-14 | Enable recording on clipv1/m200v4/c200v2 | Rafaël Carré |
2010-05-14 | Disable shutting down with the charger connected on the gigabeat s since it d... | Nils Wallménius |
2010-05-14 | Cache align the pitch detector audiobuffer where needed. Some other misc. cha... | Michael Sevakis |
2010-05-13 | clipv2: current usage estimation | Rafaël Carré |
2010-05-13 | fix a typo in comment | Rafaël Carré |
2010-05-13 | as3525: use DMA for recording | Rafaël Carré |
2010-05-13 | fuzev2: current estimation assuming same battery capacity than v1 | Rafaël Carré |
2010-05-12 | Fix r25970 red and yellow *and* a bug uncovered for pp5002 where pcm_play_dma... | Michael Sevakis |
2010-05-12 | PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to ... | Michael Sevakis |
2010-05-12 | fix the last of the reds, and make RDS tags actually work (and add them to th... | Jonathan Gordon |
2010-05-11 | Gigabeat F/X: Let us clear up confusion about just what the core frequency is... | Michael Sevakis |
2010-05-11 | MRobe100, HD200, Gigabeat F/X (anything with wm8750 or wm8751). Properly pres... | Michael Sevakis |
2010-05-10 | as3525(v1) : correct CPU_FREQ | Rafaël Carré |
2010-05-10 | as3525v2: disable adjustable CPU frequency | Rafaël Carré |
2010-05-09 | Update current usage for Fuzev1/e200v2/Clipv1 | Rafaël Carré |