summaryrefslogtreecommitdiff
path: root/firmware/export/imx31l.h
AgeCommit message (Expand)Author
2010-04-07Gigabeat S (imx31): Begin voltage and frequency scaling code. For now, to avo...Michael Sevakis
2009-10-31Remove svn:executable from firmwareMichael Chicoine
2009-06-29Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.hRafaël Carré
2009-03-22imx31/mc13783: Do some housekeeping with register macros, function names and ...Michael Sevakis
2009-03-12Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binar...Michael Sevakis
2009-03-02imx31: Correct a register name typo.Michael Sevakis
2009-03-02imx31 ATA: Correct a register #define error (due to error in user's manual). ...Michael Sevakis
2009-02-08Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other mi...Michael Sevakis
2009-02-07Gigabeat S: Move the LCD framebuffer address so that DRAM can be mapped flat ...Michael Sevakis
2009-01-23Gigabeat S: Implement a genuine udelay function. Timer is gated to not run in...Michael Sevakis
2009-01-19USB detection changes. c200/e200: Consider USB to be powered when charger is ...Michael Sevakis
2008-12-31Gigabeat S: Allow recording from FM. Give FM the same volume range as playbac...Michael Sevakis
2008-12-27Make si4700 tuner driver more sane with bit and field defines and entirely hi...Michael Sevakis
2008-12-04Fix yellow.Michael Sevakis
2008-11-19Add some watchdog timer definitions for IMX31LMichael Sevakis
2008-06-28Updated our source code header to explicitly mention that we are GPL v2 orDaniel Stenberg
2008-05-11Enable write buffering for the 1MB device memory section. This means using a ...Michael Sevakis
2008-05-08Disable clocks for most modules in the imx31l on startup, individual drivers ...Nils Wallménius
2008-05-03Gigabeat S: Man it's so loud in here. We have SOUND! Someone please make keym...Michael Sevakis
2008-05-02Remove some cruft not being used that interferes with building rockboy on Gig...Michael Sevakis
2008-04-27IMX31: Use template structures to access modules' registers from a base addre...Michael Sevakis
2008-04-27Gigabeat S: Implement i2c driver - transmit works but no testing of receiving...Michael Sevakis
2008-04-20move some data around to place qh_array at the start of iram. This saves up t...Frank Gevaerts
2008-04-18UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plu...Michael Sevakis
2008-04-12Add GPIO manager. Get the PMIC interrupt handling working (along with power b...Michael Sevakis
2008-04-11Serial driver for imx31. Perhaps not 100% but maybe 80-90% (future developmen...Michael Sevakis
2008-04-02Gigabeat S: Add some more register #defines to use later.Michael Sevakis
2008-02-19Bring the IMX31 serial driver in line with the CONTRIBUTING guidelines.Will Robertson
2008-02-09Gigabeat S: Get button driver at 100%. Disable SPI because it hangs and will ...Michael Sevakis
2008-02-08Gigabeat S: Get boot to go a little father.Michael Sevakis
2008-02-08Gigabeat S: Interrupt enabled bootloader. Miscellaneous integration changes.Michael Sevakis
2008-02-05Oops. Dump some testing stuff that got left in.Michael Sevakis
2008-02-05Gigabeat S mixer: Make some progress. Get the tick and core sleep working usi...Michael Sevakis
2007-12-23Gigabeat S now uses the shared ARM MMU code rather than the (mostly duplicate...Will Robertson
2007-09-21Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.Will Robertson
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 08:07:25 +0000