summaryrefslogtreecommitdiff
path: root/firmware/export/config-logikdax.h
AgeCommit message (Collapse)Author
2009-12-07Rename targets to be consistent in all places. (FS #10819). Take 2.Björn Stenberg
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23883 a1c6a512-1295-4272-9138-f99709370657
2009-11-07Introduce new config header 'config-sim.h' that takes care of undefining ↵Nils Wallménius
things that shouldn't be defined for sims so that the target configs no longer need to have #ifndef SIMULATOR sections and to bring some consistency for what is and is not included for sims. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23547 a1c6a512-1295-4272-9138-f99709370657
2009-09-06move the CONFIG_LED #define out into config.h as all but 3 targets actually ↵Jonathan Gordon
have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22644 a1c6a512-1295-4272-9138-f99709370657
2009-08-18LCD_DEPTH == 1 : specify if lcd framebuffer is in iram into the model ↵Rafaël Carré
specific config file git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22397 a1c6a512-1295-4272-9138-f99709370657
2009-02-09Put the display colours for monochrome and greyscale targets into the target ↵Jens Arnold
config files, and use them both for the simulator UI and screendumps. The Clip now shows the split display properly in screendumps and simulator. A side effect is that screendumps of ordinary monochrome targets are now 4-bit BMP files (saves an alternate code path, and might be more compatible with some gfx programs). * Simplify the simulation of split display, and also simplify greylib simulation. The simulator now always calculates 129 shades (2*128 for a Clip sim), and just uses 2 (or 4) of those for native display simulation. * Centralised the simulator LCD dimension definition. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19950 a1c6a512-1295-4272-9138-f99709370657
2008-11-30Replace USE_HIGH_SPEED with USB_NO_HIGH_SPEED, as high speed support is the ↵Frank Gevaerts
normal case git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19274 a1c6a512-1295-4272-9138-f99709370657
2008-11-01fix redsFrank Gevaerts
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18962 a1c6a512-1295-4272-9138-f99709370657
2008-10-31cleanup storage definesFrank Gevaerts
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
2008-10-20add Logik DAX USB idsFrank Gevaerts
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18848 a1c6a512-1295-4272-9138-f99709370657
2008-10-19Codec memory reorganizationNils Wallménius
Based on a patch by Tomasz Malesinski * Merge Codec buffer and Malloc buffer into one large buffer. * The new merged buffer is now 1MB on targets with lots of memory. * Renamed codec_get_memory to codec_get_buffer and made it behave more. like plugin_get_buffer. * Bumped Codec api and min api versions. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18834 a1c6a512-1295-4272-9138-f99709370657
2008-10-02Change the MODEL_NUMBER for various new ports so that it is unique again.Dave Chapman
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18684 a1c6a512-1295-4272-9138-f99709370657
2008-09-22Correct version of memory sizes in config-logikdax.h (previous values were ↵Dave Chapman
just experimental and should not have been committed). We also need to remove two more codecs for this codec buffer size (128KB). The m200 and DAX builds now actually build. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18568 a1c6a512-1295-4272-9138-f99709370657
2008-09-22Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik ↵Dave Chapman
DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18566 a1c6a512-1295-4272-9138-f99709370657
2008-09-04WPS editor:Maurus Cuelenaere
* Simplify Makefile * Get rid of buildall.* * Change library loading behaviour to work with MODEL_NAME Screenshot: * Simplify Makefile config-*.h: * Add MODEL_NAME git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18407 a1c6a512-1295-4272-9138-f99709370657
2008-05-02Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik ↵Dave Chapman
DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2007-11-01Button driver for Logik DAX, plus some changes to the debug info displayed ↵Dave Chapman
in the bootloader build. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15396 a1c6a512-1295-4272-9138-f99709370657
2007-10-28Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader ↵Dave Chapman
build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 03:58:40 +0000