Age | Commit message (Collapse) | Author |
|
- Audio playback works
- Touchscreen and buttons work
- Bootloader works and is capable of dual boot
- Plugins are working
- Cabbiev2 theme has been ported
- Stable for general usage
Thanks to Marc Aarts for porting Cabbiev2 and plugin bitmaps.
There's a few minor known issues:
- Bootloader must be installed manually using 'usbboot' as there is
no support in jztool yet.
- Keymaps may be lacking, need further testing and feedback.
- Some plugins may not be fully adapted to the screen size and could
benefit from further tweaking.
- LCD shows abnormal effects under some circumstances: for example,
after viewing a mostly black screen an afterimage appears briefly
when going back to a brightly-lit screen. Sudden power-off without
proper shutdown of the backlight causes a "dissolving" effect.
- CW2015 battery reporting driver is buggy, and disabled for now.
Battery reporting is currently voltage-based using the AXP192.
Change-Id: I635e83f02a880192c5a82cb0861ad3a61c137c3a
|
|
They were never finished, never saw any release ever, and haven't
compiled for the better part of a decade. Given their HW capabilities [1],
they are not worth trying to fix.
[1] 1-2MB RAM, ~256MB onboard flash, no expandability
Change-Id: I7b2a5806d687114c22156bb0458d4a10a9734190
|
|
Change-Id: I7517e7d5459e129dcfc9465c6fbd708619888fbe
|
|
Mainly a straight replacement of FIIO_M3K -> FIIO_M3K_LINUX.
Change-Id: Id07c84f8150991d1b6851540c2c3f8f67e3f12c2
|
|
The Q and K have a slightly different case, but the hardware under the
shell is completely identical.
These models are rebadged versions:
* Hifiwalker H2 (== Q)
* AGPTek H3 (== K)
* Surfans F20 (== K)
Other notes:
* Significant improvements in the shared Hiby-platform launcher/loader
* SD card can theoretically be hot-swapped now
* Support external USB mass storage!
* Some consolidation of Hiby-platform targets
* Some consolidation of plugin keymaps
Todo/known issues:
* Keymaps need to be gone over properly
* Convert to HAVE_SCROLLWHEEL?
Change-Id: I5a8a4f22c38a5b69392ca7c0a8ad8c4e07d9523c
|
|
Most credit goes to: Roman Skylarov
Additional integration and refactoring by myself.
*** COMPLETELY UNTESTED ***
Change-Id: Ia64c36d92e0214c6b15f7a868df286f8113ea27b
|
|
This removes all code specific to SH targets
Change-Id: I7980523785d2596e65c06430f4638eec74a06061
|
|
Provided by Roman Stolyarov
Integration, Refactoring, and Upstreaming by Solomon Peachy
X3II confirmed working by forum tester, X20 is nearly identical.
This includes bootloader, main firmware, and the flash image patcher.
Eventual Todo:
* Further refactor AGPTek Rocker & xduoo hiby bootloaders
* Further refactor AGPTek Rocker & xduoo hosted platform code
Change-Id: I34a674051d368efcc75d1d18c725971fe46c3eee
|
|
Taken from the xvortex fork (Roman Stolyarov)
Ported, rebased, and cleaned up by myself.
Change-Id: I7b2bca2d29502f2e4544e42f3d122786dd4b7978
|
|
Cleaned up, rebased, and forward-ported from the xvortex fork.
(original credit to vsoftster@gmail.com)
Change-Id: Ibcc023a0271ea81e901450a88317708c2683236d
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
|
|
Patch provided by Aapo Tahkola.
Change-Id: I37a42a950d78d6b8aa3927ec7aeb30030f7be7a5
|
|
Keymaps aren't tested, there may be room for improvement.
Change-Id: I6b8fe697899b241ea6e96f4fe446d88671ad7818
|
|
seems more logical to me, and is more consistent, since
"SAMSUNG_YH92X_PAD" is already used in the tex files.
Change-Id: Ie9a9d850ea86155a7dcf86c88a22a420a10a3837
|
|
The main "innovation" in this patch are two "virtual buttons"
for the record switch on YH92x targets. When the switch state
changes, a single BUTTON_REC_SW_ON or .._OFF button event will
be generated. Thus keymap code can react on switching, but
not on the actual state of the switch.
Wherever sensible, the following user scheme is applied:
- use PLAY as confirm button
- use REW button or Long REW to exit
- use REC (YH820) or FFWD (YH92X) as modifier key for button combos
Change-Id: Ic8d1db9cc6869daed8dda98990dfdf7f6fd5d5a1
|
|
The port to for this two targets has been entirely developped by Ilia Sergachev (alias Il or xzcc). His source
can be found at https://bitbucket.org/isergachev/rockbox . The few necesary modifications for the DX90 port
was done by headwhacker form head-fi.org. Unfortunately i could not try out the final state of the DX90 port.
The port is hosted on android (without java) as standalone app. The official Firmware is required to run this port.
Ilia did modify the source files for the "android" target in the rockbox source to make the DX port work. The work I did
was to separate the code for DX50 (&DX90) from the android target.
On this Target Ilia used source from tinyalsa from AOSP. I did not touch that part of the code because I do not understand it.
What else I changed from Ilias sources besides the separation from the target "android":
* removed a dirty hack to keep backlight off
* changed value battery meter to voltage battery meter
* made all plugins compile (named target as "standalone") and added keymaps
* i added the graphics for the manual but did not do anything else for the manual yet
* minor optimizations
known bugs:
* timers are slowed donw when playback is active (tinyalsa related?)
* some minor bugs
Things to do:
* The main prolem will be how to install the app correctly. A guy called DOC2008 added a CWM (by androtab.info) to the
official firmware and Ilia made a CWM installation script and a dualboot selector (rbutils/ibassoboot, build with
ndk-build). We will have to find a way to install rockbox in a proper way without breaking any copyrights.
Maybe ADB is an option but it is not enable with OF by default. Patching the OF is probably the way to go.
* All the wiki and manual
to build:
needed: android ndk installed, android sdk installed with additional build-tools 19.1.0 installed
./tools/configure
select iBasso DX50 or iBasso DX90
make -j apk
the content of rockbox.zip/.rockbox needs to be copied to /system/rockbox/app_rockbox/rockbox/ (rockbox app not needed)
the content of libs/armeabi to /system/rockbox/lib/ (rockbox app needed)
The boot selector is needed as /system/bin/MangoPlayer and the iBasso app as /system/bin/MangoPlayer_original. There
is also the "vold" file. The one from OF does not work with DX50 rockbox (DX90 works!?), the one from Ilia is necessary.
Until we have found a proper way to install it, it can only be installed following the instructions of Ilia on his
bitbucket page, using the CWM-OF and his installation script package.
Change-Id: Ic4faaf84824c162aabcc08e492cee6e0068719d0
Reviewed-on: http://gerrit.rockbox.org/941
Tested: Chiwen Chang <rock1104.tw@yahoo.com.tw>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
|
|
Plugins on the ZEN/ZEN X-Fi require to increase the plugin buffer size.
Change-Id: If4651c87b402060faa24530985c6e871379c8ea1
|
|
Change-Id: I46b8766bd44118bce4931b7ee71815ae5f51cb2e
Reviewed-on: http://gerrit.rockbox.org/879
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
|
|
Although both players basically have the same keys, the
differences in the layout is rather big, so I think both
deserve their own keymaps.
(On the yh820 the FFWD/PLAY/REW buttons are located above the
direction keys, on the yh920 at the side of the player.
Furthermore the yh920/925 has a REC switch, whereas
yh820 has a push button.)
Change-Id: I0e62a1b101c387646c0bdb07ea142d9d2430ca15
Reviewed-on: http://gerrit.rockbox.org/814
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
|
|
This patch completes the plugin keymaps for the Zen X-Fi3 and enables those plugins for compilation.
One key was changed in "button-target.h" for compatibility with Rockboy.
This also caused the changes to "keymap-zenxfi3.c", to keep the stock functionality (no further changes in here).
Change-Id: Ic222faf89e9a9a2332a49d6e532cedb6eb16d3d7
Reviewed-on: http://gerrit.rockbox.org/762
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
|
|
This is the basic port to the new target Samsung
YP-R1, which runs on a similar platform as YP-R0.
Port is usable, although there are still
some optimizations that have to be done.
Change-Id: If83a8e386369e413581753780c159026d9e41f04
|
|
Change-Id: I81654db87d38324d8680a56bcdb7e9922ee5b619
|
|
Change-Id: I4cad0881c8249f163680a280f70d1a0b36248da8
|
|
Enable for toucschreen RaaA.
Change-Id: Ief0937693dc2056ed442f68a5ab76a006eaa1209
|
|
This port is a hybrid native/RaaA port. It runs on a embedded linux system,
but is the only application. It therefore can implement lots of stuff that
native targets also implement, while leveraging the underlying linux kernel.
The port is quite advanced. User interface, audio playback, plugins work
mostly fine. Missing is e.g. power mangement and USB (see SamsungYPR0 wiki page).
Included in utils/ypr0tools are scripts and programs required to generate
a patched firmware. The patched firmware has the rootfs modified to load
Rockbox. It includes a early/safe USB mode.
This port needs a new toolchain, one that includes glibc headers and libraries.
rockboxdev.sh can generate it, but e.g. codesourcey and distro packages may
also work.
Most of the initial effort is done by Lorenzo Miori and others (on ABI),
including reverse engineering and patching of the original firmware,
initial drivers, and more. Big thanks to you.
Flyspray: FS#12348
Author: Lorenzo Miori, myself
Merry christmas to ypr0 owners! :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31415 a1c6a512-1295-4272-9138-f99709370657
|
|
Included are drivers for buttons, backlight, lcd, audio and storage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30693 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28712 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28450 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28443 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25724 a1c6a512-1295-4272-9138-f99709370657
|
|
the target.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24658 a1c6a512-1295-4272-9138-f99709370657
|
|
to target naming conventions in general
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24010 a1c6a512-1295-4272-9138-f99709370657
|
|
Just pluginlib actions and Doom and I'm DONE!! :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23912 a1c6a512-1295-4272-9138-f99709370657
|
|
* Enable plugins for VX777
* Fix VX777 simulator
All done by Aaron DeMille.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22576 a1c6a512-1295-4272-9138-f99709370657
|
|
with improvements and bitmap graphics by me.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22149 a1c6a512-1295-4272-9138-f99709370657
|
|
(text does not scroll currently), and fix some target buttons.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22121 a1c6a512-1295-4272-9138-f99709370657
|
|
Reversi. MRobe 500: Modify touch handler to return the previous data always rather than 0 when there is no touch.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22110 a1c6a512-1295-4272-9138-f99709370657
|
|
touchscreen support (Menu button and quit button need to be added to display)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22079 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20857 a1c6a512-1295-4272-9138-f99709370657
|
|
Updates the plugin keymap to use Long Home to exit plugins to be more inline with the core keymap.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20680 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20647 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20179 a1c6a512-1295-4272-9138-f99709370657
|
|
device (patches welcome).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19846 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19673 a1c6a512-1295-4272-9138-f99709370657
|
|
key-layout. Enable plugins, add keymaps for plugins. More keymap improvements needed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19405 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19363 a1c6a512-1295-4272-9138-f99709370657
|
|
tools/configure. FS#9605 by Adam Hogan and Robert Menes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19335 a1c6a512-1295-4272-9138-f99709370657
|
|
Use unmodified C200 keymap when possible, variation of it when not
Use Archos bitmaps when possible
Current problems:
- Pegbox plugin shows display corruption (corruption is different in the simulator)
- Bubbles plugin misses 1 or 2 bottom lines, but if we gain back these lines it occupies a too small area of the screen
- Splitted screen (yellow/blue) is a bit weird in most plugins
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19252 a1c6a512-1295-4272-9138-f99709370657
|
|
IAUDIO7: Define MODEL_NAME in config
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18730 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18338 a1c6a512-1295-4272-9138-f99709370657
|