diff options
Diffstat (limited to 'firmware/export/config/hifietma8.h')
| -rw-r--r-- | firmware/export/config/hifietma8.h | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/firmware/export/config/hifietma8.h b/firmware/export/config/hifietma8.h new file mode 100644 index 0000000000..7d36882832 --- /dev/null +++ b/firmware/export/config/hifietma8.h @@ -0,0 +1,153 @@ +/* + * This config file is for HiFi E.T. MA8 reference design + */ + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 85 + +#define MODEL_NAME "HiFi E.T. MA8" + +/* define the bitmask of hardware sample rates */ +#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_48 | SAMPR_CAP_44 | \ + SAMPR_CAP_32 | SAMPR_CAP_24 | SAMPR_CAP_22 | \ + SAMPR_CAP_16 | SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8) + +#define HAVE_PCM1792_CODEC + +#define CODEC_SLAVE +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP + +/* define this if you can flip your LCD */ +/* #define HAVE_LCD_FLIP */ + +/* define this if you have a colour LCD */ +#define HAVE_LCD_COLOR + +/* define this if you want album art for this target */ +#define HAVE_ALBUMART + +/* define this to enable bitmap scaling */ +#define HAVE_BMP_SCALING + +/* define this to enable JPEG decoding */ +#define HAVE_JPEG + +/* define this if you can invert the colours on your LCD */ +/* #define HAVE_LCD_INVERT */ + +/* define this if you have access to the quickscreen */ +#define HAVE_QUICKSCREEN + +/* define this if you would like tagcache to build on this target */ +#define HAVE_TAGCACHE + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +#define CONFIG_STORAGE (STORAGE_SD | STORAGE_NAND) + +#define CONFIG_NAND NAND_RK27XX +#define HAVE_SW_TONE_CONTROLS + +/* commented for now */ +/* #define HAVE_HOTSWAP */ + +#define NUM_DRIVES 2 +#define SECTOR_SIZE 512 + +/* for small(ish) SD cards */ +#define HAVE_FAT16SUPPORT + +/* LCD dimensions */ +#define LCD_WIDTH 320 +#define LCD_HEIGHT 240 +#define LCD_DEPTH 16 /* pseudo 262.144 colors */ +#define LCD_PIXELFORMAT RGB565 /* rgb565 */ + +/* Define this if your LCD can be enabled/disabled */ +#define HAVE_LCD_ENABLE + +#define CONFIG_KEYPAD MA_PAD + +/* Define this to enable morse code input */ +#define HAVE_MORSE_INPUT + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC + +#define CONFIG_LCD LCD_ILI9342 + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT +#define HAVE_BACKLIGHT_BRIGHTNESS +#define MIN_BRIGHTNESS_SETTING 0 +#define MAX_BRIGHTNESS_SETTING 31 +#define DEFAULT_BRIGHTNESS_SETTING 31 +#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG + +/* Define this if you have a software controlled poweroff */ +#define HAVE_SW_POWEROFF + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0x100000 + +/* The number of bytes reserved for loadable plugins */ +#define PLUGIN_BUFFER_SIZE 0x80000 + +/* TODO: Figure out real values */ +#define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 10 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE + +/* Hardware controlled charging with monitoring */ +#define CONFIG_CHARGING CHARGING_MONITOR + +/* USB On-the-go */ +#define CONFIG_USBOTG USBOTG_RK27XX + +/* enable these for the experimental usb stack */ +#define HAVE_USBSTACK + +#define USE_ROCKBOX_USB +#define USB_VENDOR_ID 0x071b +#define USB_PRODUCT_ID 0x3202 +#define HAVE_BOOTLOADER_USB_MODE + +/* Define this if your LCD can set contrast */ +/* #define HAVE_LCD_CONTRAST */ + +/* The exact type of CPU */ +#define CONFIG_CPU RK27XX + +/* I2C interface */ +#define CONFIG_I2C I2C_RK27XX + +/* Define this to the CPU frequency */ +#define CPU_FREQ 200000000 + +/* define this if the hardware can be powered off while charging */ +/* #define HAVE_POWEROFF_WHILE_CHARGING */ + +/* Offset ( in the firmware file's header ) to the file CRC */ +#define FIRMWARE_OFFSET_FILE_CRC 0 + +/* Offset ( in the firmware file's header ) to the real data */ +#define FIRMWARE_OFFSET_FILE_DATA 8 + +#define STORAGE_NEEDS_ALIGN + +/* Define this if you have adjustable CPU frequency */ +#define HAVE_ADJUSTABLE_CPU_FREQ + +/* Virtual LED (icon) */ +#define CONFIG_LED LED_VIRTUAL + +#define RKW_FORMAT +#define BOOTFILE_EXT "rkw" +#define BOOTFILE "rockbox." BOOTFILE_EXT +#define BOOTDIR "/.rockbox" |