1 files changed, 121 insertions, 0 deletions
diff --git a/firmware/export/config-e200.h b/firmware/export/config-e200.h
new file mode 100644
index 0000000000..3793a716ec
--- /dev/null
+++ b/firmware/export/config-e200.h
@@ -0,0 +1,121 @@
+/*
+ * This config file is for the Sandisk Sansa e200
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 12
+
+/* define this if you have recording possibility */
+/*#define HAVE_RECORDING 1*/ /* TODO: add support for this */
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP 1
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR 1
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* LCD dimensions */
+#define LCD_WIDTH  176
+#define LCD_HEIGHT 220
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
+
+/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
+
+#define CONFIG_KEYPAD SANSA_E200_PAD
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+#ifndef BOOTLOADER
+#define CONFIG_RTC RTC_E8564  /* TODO: figure this out */
+#endif
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x80000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+/* Define this if you have the WM8975 audio codec */
+#define HAVE_WM8731
+
+#define AB_REPEAT_ENABLE 1
+
+/* FM Tuner */
+/*#define CONFIG_TUNER TEA5767
+#define CONFIG_TUNER_XTAL  32768 *//* TODO: what is this? */
+
+/* Define this for LCD backlight available */
+#define CONFIG_BACKLIGHT BL_H10 /* TODO: figure this out, probably not necessary
+                                   because of 'target' stuff */
+
+#define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity
+                                        TODO: check this, probably different
+                                        for different models too */
+
+#ifndef SIMULATOR
+
+/* Define this if you have a PortalPlayer PP5024 */
+#define CONFIG_CPU PP5024
+
+/* Define this if you want to use the PP5020 i2c interface */
+#define CONFIG_I2C I2C_PP5020
+
+/* Type of mobile power */
+#define CONFIG_BATTERY BATT_LPCS355385
+#define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 10   /* capacity increment */
+#define BATTERY_TYPES_COUNT  1    /* only one type */
+#define BATTERY_SCALE_FACTOR 5865
+
+/* Hardware controlled charging? FIXME */
+//#define CONFIG_CHARGING CHARGING_SIMPLE
+
+/* define this if the hardware can be powered off while charging */
+/* TODO: should this be set for the H10? */
+//#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The start address index for ROM builds */
+#define ROM_START 0x00000000
+
+/* Define this to the CPU frequency */
+/* TODO: this is probably wrong */
+#define CPU_FREQ      11289600
+
+/* Type of LCD TODO: hopefully the same as the x5 but check this*/
+#define CONFIG_LCD LCD_X5
+
+/* Offset ( in the firmware file's header ) to the file length */
+#define FIRMWARE_OFFSET_FILE_LENGTH 0
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* #define USB_IPODSTYLE */
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/* Define this if you have adjustable CPU frequency */
+/*#define HAVE_ADJUSTABLE_CPU_FREQ Let's say we don't for now*/
+
+#define BOOTFILE_EXT "e200"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+
+#endif