diff options
Diffstat (limited to 'firmware/export/config-clip.h')
| -rw-r--r-- | firmware/export/config-clip.h | 176 |
1 files changed, 176 insertions, 0 deletions
diff --git a/firmware/export/config-clip.h b/firmware/export/config-clip.h new file mode 100644 index 0000000000..b6ffccecab --- /dev/null +++ b/firmware/export/config-clip.h @@ -0,0 +1,176 @@ +/* + * This config file is for the Sandisk Sansa e200 + */ +#define TARGET_TREE /* this target is using the target tree system */ + +/* For Rolo and boot loader */ +#define MODEL_NUMBER 50 +#define MODEL_NAME "Sandisk Sansa Clip" +#define FIRMWARE_OFFSET_FILE_DATA 0 +#define FIRMWARE_OFFSET_FILE_CRC 0 + +#if 0 +#define HW_SAMPR_CAPS (SAMPR_CAP_44) + +/* define this if you have recording possibility */ +#define HAVE_RECORDING + +#define REC_SAMPR_CAPS (SAMPR_CAP_22) +#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */ +#define REC_SAMPR_DEFAULT SAMPR_22 + + +/* Define bitmask of input sources - recordable bitmask can be defined + explicitly if different */ +#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) +#endif + +/* define this if you have a bitmap LCD display */ +#define HAVE_LCD_BITMAP + +/* define this if you have a light associated with the buttons */ +#define HAVE_BUTTON_LIGHT + +/* define this if you have access to the quickscreen */ +//#define HAVE_QUICKSCREEN + +/* define this if you have access to the pitchscreen */ +//#define HAVE_PITCHSCREEN + +/* define this if you would like tagcache to build on this target */ +//#define HAVE_TAGCACHE + +/* LCD dimensions */ +#define LCD_WIDTH 128 +#define LCD_HEIGHT 64 +#define LCD_DEPTH 1 +#define LCD_PIXELFORMAT VERTICAL_PACKING + +/* define this if you have LCD enable function */ +#define HAVE_LCD_ENABLE + +#ifndef BOOTLOADER + +/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE + should be defined as well. */ +//#define HAVE_LCD_SLEEP +//#define HAVE_LCD_SLEEP_SETTING +#endif + +/* define this if you can flip your LCD */ +//#define HAVE_LCD_FLIP + +/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ + +#define CONFIG_KEYPAD SANSA_CLIP_PAD + +/* Define this if you do software codec */ +#define CONFIG_CODEC SWCODEC +/* There is no hardware tone control */ +#define HAVE_SW_TONE_CONTROLS + +#define HAVE_AS3525 + +/* define this if you have a real-time clock */ +#ifndef BOOTLOADER +//#define CONFIG_RTC RTC_AS3525 +#endif + +/* Define this if you have a software controlled poweroff */ +//#define HAVE_SW_POWEROFF + +#define HAVE_FAT16SUPPORT + +/* The number of bytes reserved for loadable codecs */ +#define CODEC_SIZE 0 +//#define CODEC_SIZE 0x80000 + +/* The number of bytes reserved for loadable plugins */ +//#define PLUGIN_BUFFER_SIZE 0x80000 + +#define AB_REPEAT_ENABLE 1 + +/* FM Tuner */ +//#define CONFIG_TUNER LV24020LP +//#define HAVE_TUNER_PWR_CTRL + +/* Define this for LCD backlight available */ +#define HAVE_BACKLIGHT +#define HAVE_BACKLIGHT_BRIGHTNESS + +/* define this if you have a flash memory storage */ +#define HAVE_FLASH_STORAGE + +/* define this if the flash memory uses the SecureDigital Memory Card protocol */ +#define HAVE_ATA_SD + +#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */ +#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */ +#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */ +#define BATTERY_CAPACITY_INC 0 /* capacity increment */ +#define BATTERY_TYPES_COUNT 1 /* only one type */ + +/* Hardware controlled charging? FIXME */ +#define CONFIG_CHARGING CHARGING_SIMPLE + +/* define this if the unit can be powered or charged via USB */ +#define HAVE_USB_POWER + +/** Non-simulator section **/ +#ifndef SIMULATOR + +/* Define this if you have a PortalPlayer PP5024 */ +#define CONFIG_CPU AS3525 + +/* Define this if you want to use the PP5024 i2c interface */ +#define CONFIG_I2C I2C_AS3525 + +/* define this if the hardware can be powered off while charging */ +/* Sansa can't be powered off while charging */ +/* #define HAVE_POWEROFF_WHILE_CHARGING */ + +/* The start address index for ROM builds */ +#define ROM_START 0x00000000 + +/* Define this to the CPU frequency */ +#define CPU_FREQ 250000000 + +/* Type of LCD */ +#define CONFIG_LCD LCD_SSD1303 + +#ifndef BOOTLOADER +#define HAVE_MULTIVOLUME +#define HAVE_HOTSWAP + +/* USB On-the-go */ +#define CONFIG_USBOTG USBOTG_ARC + +/* enable these for the experimental usb stack */ +#define HAVE_USBSTACK +#define USB_VENDOR_ID 0x0781 +#define USB_PRODUCT_ID 0x7421 +#endif /* BOOTLOADER */ + +/* Virtual LED (icon) */ +#define CONFIG_LED LED_VIRTUAL + +/* Define this if you have adjustable CPU frequency */ +#define HAVE_ADJUSTABLE_CPU_FREQ + +#define ICODE_ATTR_TREMOR_NOT_MDCT + +#define INCLUDE_TIMEOUT_API + +#endif /* SIMULATOR */ + +/** Port-specific settings **/ + +/* Main LCD backlight brightness range and defaults */ +#define MIN_BRIGHTNESS_SETTING 1 +#define MAX_BRIGHTNESS_SETTING 12 +#define DEFAULT_BRIGHTNESS_SETTING 6 + +/* Default recording levels */ +#define DEFAULT_REC_MIC_GAIN 23 +#define DEFAULT_REC_LEFT_GAIN 23 +#define DEFAULT_REC_RIGHT_GAIN 23 |