diff options
Diffstat (limited to 'firmware/drivers')
-rw-r--r-- | firmware/drivers/power.c | 4 | ||||
-rw-r--r-- | firmware/drivers/tuner/lv24020lp.c | 870 | ||||
-rw-r--r-- | firmware/drivers/tuner/s1a0903x01.c | 172 | ||||
-rw-r--r-- | firmware/drivers/tuner/tea5767.c | 135 |
4 files changed, 1179 insertions, 2 deletions
diff --git a/firmware/drivers/power.c b/firmware/drivers/power.c index eb69fcec27..50117dd321 100644 --- a/firmware/drivers/power.c +++ b/firmware/drivers/power.c @@ -37,12 +37,12 @@ bool charger_enabled; static bool powered = false; -bool radio_powered(void) +bool tuner_powered(void) { return powered; } -bool radio_power(bool status) +bool tuner_power(bool status) { bool old_status = powered; powered = status; diff --git a/firmware/drivers/tuner/lv24020lp.c b/firmware/drivers/tuner/lv24020lp.c new file mode 100644 index 0000000000..9ec68f9a27 --- /dev/null +++ b/firmware/drivers/tuner/lv24020lp.c @@ -0,0 +1,870 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * Tuner driver for the Sanyo LV24020LP + * + * Copyright (C) 2007 Ivan Zupan + * + * All files in this archive are subject to the GNU General Public License. + * See the file COPYING in the source tree root for full license agreement. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#include <stdbool.h> +#include <stdlib.h> +#include "config.h" +#include "thread.h" +#include "kernel.h" +#include "tuner.h" /* tuner abstraction interface */ +#include "fmradio.h" /* physical interface driver */ +#include "sound.h" +#include "pp5024.h" +#include "system.h" + +#ifndef BOOTLOADER + +#if 0 +/* define to enable tuner logging */ +#define SANYO_TUNER_LOG +#endif + +#ifdef SANYO_TUNER_LOG +#include "sprintf.h" +#include "file.h" + +static int fd_log = -1; + +#define TUNER_LOG_OPEN() if (fd_log < 0) \ + fd_log = creat("/tuner_dump.txt") +/* syncing required because close() is never called */ +#define TUNER_LOG_SYNC() fsync(fd_log) +#define TUNER_LOG(s...) fdprintf(fd_log, s) +#else +#define TUNER_LOG_OPEN() +#define TUNER_LOG_SYNC() +#define TUNER_LOG(s...) +#endif /* SANYO_TUNER_LOG */ + +/** tuner register defines **/ + +/* pins on GPIOH port */ +#define FM_NRW_PIN 3 +#define FM_CLOCK_PIN 4 +#define FM_DATA_PIN 5 +#define FM_CLK_DELAY 1 + +/* block 1 registers */ + +/* R */ +#define CHIP_ID 0x00 + +/* W */ +#define BLK_SEL 0x01 + #define BLK1 0x01 + #define BLK2 0x02 + +/* W */ +#define MSRC_SEL 0x02 + #define MSR_O (1 << 7) + #define AFC_LVL (1 << 6) + #define AFC_SPD (1 << 5) + #define MSS_SD (1 << 2) + #define MSS_FM (1 << 1) + #define MSS_IF (1 << 0) + +/* W */ +#define FM_OSC 0x03 + +/* W */ +#define SD_OSC 0x04 + +/* W */ +#define IF_OSC 0x05 + +/* W */ +#define CNT_CTRL 0x06 + #define CNT1_CLR (1 << 7) + #define CTAB(x) ((x) & (0x7 << 4)) + #define CTAB_STOP_2 (0x0 << 4) + #define CTAB_STOP_8 (0x1 << 4) + #define CTAB_STOP_32 (0x2 << 4) + #define CTAB_STOP_128 (0x3 << 4) + #define CTAB_STOP_512 (0x4 << 4) + #define CTAB_STOP_2048 (0x5 << 4) + #define CTAB_STOP_8192 (0x6 << 4) + #define CTAB_STOP_32768 (0x7 << 4) + #define SWP_CNT_L (1 << 3) + #define CNT_EN (1 << 2) + #define CNT_SEL (1 << 1) + #define CNT_SET (1 << 0) + +/* W */ +#define IRQ_MSK 0x08 + #define IM_MS (1 << 6) + #define IRQ_LVL (1 << 3) + #define IM_AFC (1 << 2) + #define IM_FS (1 << 1) + #define IM_CNT2 (1 << 0) + +/* W */ +#define FM_CAP 0x09 + +/* R */ +#define CNT_L 0x0a /* Counter register low value */ + +/* R */ +#define CNT_H 0x0b /* Counter register high value */ + +/* R */ +#define CTRL_STAT 0x0c + #define AFC_FLG (1 << 0) + +/* R */ +#define RADIO_STAT 0x0d + #define RSS_MS (1 << 7) + #define RSS_FS(x) ((x) & 0x7f) + #define RSS_FS_GET(x) ((x) & 0x7f) + #define RSS_FS_SET(x) (x) +/* Note: Reading this register will clear field strength and mono/stereo interrupt. */ + +/* R */ +#define IRQ_ID 0x0e + #define II_CNT2 (1 << 5) + #define II_AFC (1 << 3) + #define II_FS_MS (1 << 0) + +/* W */ +#define IRQ_OUT 0x0f + +/* block 2 registers - offset added in order to id and avoid manual + switching */ +#define BLK2_START 0x10 + +/* W */ +#define RADIO_CTRL1 (0x02 + BLK2_START) + #define EN_MEAS (1 << 7) + #define EN_AFC (1 << 6) + #define DIR_AFC (1 << 3) + #define RST_AFC (1 << 2) + +/* W */ +#define IF_CENTER (0x03 + BLK2_START) + +/* W */ +#define IF_BW (0x05 + BLK2_START) + +/* W */ +#define RADIO_CTRL2 (0x06 + BLK2_START) + #define VREF2 (1 << 7) + #define VREF (1 << 6) + #define STABI_BP (1 << 5) + #define IF_PM_L (1 << 4) + #define AGCSP (1 << 1) + #define AM_ANT_BSW (1 << 0) /* ?? */ + +/* W */ +#define RADIO_CTRL3 (0x07 + BLK2_START) + #define AGC_SLVL (1 << 7) + #define VOLSH (1 << 6) + #define TB_ON (1 << 5) + #define AMUTE_L (1 << 4) + #define SE_FM (1 << 3) + #define SE_BE (1 << 1) + #define SE_EXT (1 << 0) /* For LV24000=0, LV24001/24002=Ext source enab. */ + +/* W */ +#define STEREO_CTRL (0x08 + BLK2_START) + #define FRCST (1 << 7) + #define FMCS(x) ((x) & (0x7 << 4)) + #define FMCS_GET(x) (((x) & (0x7 << 4)) >> 4) + #define FMCS_SET(x) ((x) << 4) + #define AUTOSSR (1 << 3) + #define PILTCA (1 << 2) + #define SD_PM (1 << 1) + #define ST_M (1 << 0) + +/* W */ +#define AUDIO_CTRL1 (0x09 + BLK2_START) + #define TONE_LVL(x) ((x) & (0xf << 4)) + #define TONE_LVL_GET(x) (((x) & (0xf << 4)) >> 4) + #define TONE_LVL_SET(x) ((x) << 4) + #define VOL_LVL(x) ((x) & 0xf) + #define VOL_LVL_GET(x) ((x) & 0xf) + #define VOL_LVL_SET(x) ((x) << 4) + +/* W */ +#define AUDIO_CTRL2 (0x0a + BLK2_START) + #define BASS_PP (1 << 0) + #define BASS_P (1 << 1) /* BASS_P, BASS_N are mutually-exclusive */ + #define BASS_N (1 << 2) + #define TREB_P (1 << 3) /* TREB_P, TREB_N are mutually-exclusive */ + #define TREB_N (1 << 4) + #define DEEMP (1 << 5) + #define BPFREQ(x) ((x) & (0x3 << 6)) + #define BPFREQ_2_0K (0x0 << 6) + #define BPFREQ_1_0K (0x1 << 6) + #define BPFREQ_0_5K (0x2 << 6) + #define BPFREQ_HIGH (0x3 << 6) + +/* W */ +#define PW_SCTRL (0x0b + BLK2_START) + #define SS_CTRL(x) ((x) & (0x7 << 5)) + #define SS_CTRL_GET(x) (((x) & (0x7 << 5)) >> 5) + #define SS_CTRL_SET(x) ((x) << 5) + #define SM_CTRL(x) ((x) & (0x7 << 2)) + #define SM_CTRL_GET(x) (((x) & (0x7 << 2)) >> 2) + #define SM_CTRL_SET(x) ((x) << 2) + #define PW_HPA (1 << 1) /* LV24002 only */ + #define PW_RAD (1 << 0) + +/* shadow for writeable registers */ +#define TUNER_POWERED (1 << 0) +#define TUNER_PRESENT (1 << 1) +#define TUNER_AWAKE (1 << 2) +#define TUNER_PRESENCE_CHECKED (1 << 3) +static unsigned tuner_status = 0; + +static unsigned char lv24020lp_regs[0x1c]; + +static const int sw_osc_low = 10; /* 30; */ +static const int sw_osc_high = 240; /* 200; */ +static const int sw_cap_low = 0; +static const int sw_cap_high = 191; + +/* linear coefficients used for tuning */ +static int coef_00, coef_01, coef_10, coef_11; + +/* DAC control register set values */ +int if_set, sd_set; + +static inline bool tuner_awake(void) +{ + return (tuner_status & TUNER_AWAKE) != 0; +} + +/* send a byte to the tuner - expects write mode to be current */ +static void lv24020lp_send_byte(unsigned int byte) +{ + int i; + + byte <<= FM_DATA_PIN; + + for (i = 0; i < 8; i++) + { + GPIOH_OUTPUT_VAL &= ~(1 << FM_CLOCK_PIN); + + GPIOH_OUTPUT_VAL = (GPIOH_OUTPUT_VAL & ~(1 << FM_DATA_PIN)) | + (byte & (1 << FM_DATA_PIN)); + + GPIOH_OUTPUT_VAL |= (1 << FM_CLOCK_PIN); + udelay(FM_CLK_DELAY); + + byte >>= 1; + } +} + +/* end a write cycle on the tuner */ +static void lv24020lp_end_write(void) +{ + /* switch back to read mode */ + GPIOH_OUTPUT_EN &= ~(1 << FM_DATA_PIN); + GPIOH_OUTPUT_VAL &= ~(1 << FM_NRW_PIN); +} + +/* prepare a write cycle on the tuner */ +static unsigned int lv24020lp_begin_write(unsigned int address) +{ + /* Get register's block, translate address */ + unsigned int blk = (address >= BLK2_START) ? + (address -= BLK2_START, BLK2) : BLK1; + + for (;;) + { + /* Prepare 3-wire bus pins for write cycle */ + GPIOH_OUTPUT_VAL |= (1 << FM_NRW_PIN); + GPIOH_OUTPUT_EN |= (1 << FM_DATA_PIN); + + udelay(FM_CLK_DELAY); + + /* current block == register block? */ + if (blk == lv24020lp_regs[BLK_SEL]) + return address; + + /* switch block */ + lv24020lp_regs[BLK_SEL] = blk; + + /* data first */ + lv24020lp_send_byte(blk); + /* then address */ + lv24020lp_send_byte(BLK_SEL); + + lv24020lp_end_write(); + + udelay(FM_CLK_DELAY); + } +} + +/* write a byte to a tuner register */ +static void lv24020lp_write(unsigned int address, unsigned int data) +{ + /* shadow logical values but do logical=>physical remappings on some + registers' data. */ + lv24020lp_regs[address] = data; + + switch (address) + { + case FM_OSC: + /* L: 000..255 + * P: 255..000 */ + data = 255 - data; + break; + case FM_CAP: + /* L: 000..063, 064..191 + * P: 255..192, 127..000 */ + data = ((data < 64) ? 255 : (255 - 64)) - data; + break; + case RADIO_CTRL1: + /* L: data + * P: data | always "1" bits */ + data |= (1 << 4) | (1 << 1) | (1 << 0); + break; + } + + address = lv24020lp_begin_write(address); + + /* data first */ + lv24020lp_send_byte(data); + /* then address */ + lv24020lp_send_byte(address); + + lv24020lp_end_write(); +} + +/* helpers to set/clear register bits */ +static void lv24020lp_write_or(unsigned int address, unsigned int bits) +{ + lv24020lp_write(address, lv24020lp_regs[address] | bits); +} + +static void lv24020lp_write_and(unsigned int address, unsigned int bits) +{ + lv24020lp_write(address, lv24020lp_regs[address] & bits); +} + +/* read a byte from a tuner register */ +static unsigned int lv24020lp_read(unsigned int address) +{ + int i; + unsigned int toread; + + address = lv24020lp_begin_write(address); + + /* address */ + lv24020lp_send_byte(address); + + lv24020lp_end_write(); + + /* data */ + toread = 0; + for (i = 0; i < 8; i++) + { + GPIOH_OUTPUT_VAL &= ~(1 << FM_CLOCK_PIN); + udelay(FM_CLK_DELAY); + + toread |= (GPIOH_INPUT_VAL & (1 << FM_DATA_PIN)) << i; + + GPIOH_OUTPUT_VAL |= (1 << FM_CLOCK_PIN); + } + + return toread >> FM_DATA_PIN; +} + +/* enables auto frequency centering */ +static void enable_afc(bool enabled) +{ + unsigned int radio_ctrl1 = lv24020lp_regs[RADIO_CTRL1]; + + if (enabled) + { + radio_ctrl1 &= ~RST_AFC; + radio_ctrl1 |= EN_AFC; + } + else + { + radio_ctrl1 |= RST_AFC; + radio_ctrl1 &= ~EN_AFC; + } + + lv24020lp_write(RADIO_CTRL1, radio_ctrl1); +} + +static int calculate_coef(unsigned fkhz) +{ + /* Overflow below 66000kHz -- + My tuner tunes down to a min of ~72600kHz but datasheet mentions + 66000kHz as the minimum. ?? Perhaps 76000kHz was intended? */ + return fkhz < 66000 ? + 0x7fffffff : 0x81d1a47efc5cb700ull / ((uint64_t)fkhz*fkhz); +} + +static int interpolate_x(int expected_y, int x1, int x2, int y1, int y2) +{ + return y1 == y2 ? + 0 : (int64_t)(expected_y - y1)*(x2 - x1) / (y2 - y1) + x1; +} + +static int interpolate_y(int expected_x, int x1, int x2, int y1, int y2) +{ + return x1 == x2 ? + 0 : (int64_t)(expected_x - x1)*(y2 - y1) / (x2 - x1) + y1; +} + +/* this performs measurements of IF, FM and Stereo frequencies + * Input can be: MSS_FM, MSS_IF, MSS_SD */ +static int tuner_measure(unsigned char type, int scale, int duration) +{ + int64_t finval; + + if (!tuner_awake()) + return 0; + + /* enable measuring */ + lv24020lp_write_or(MSRC_SEL, type); + lv24020lp_write_and(CNT_CTRL, ~CNT_SEL); + lv24020lp_write_or(RADIO_CTRL1, EN_MEAS); + + /* reset counter */ + lv24020lp_write_or(CNT_CTRL, CNT1_CLR); + lv24020lp_write_and(CNT_CTRL, ~CNT1_CLR); + + /* start counter, delay for specified time and stop it */ + lv24020lp_write_or(CNT_CTRL, CNT_EN); + udelay(duration*1000 - 16); + lv24020lp_write_and(CNT_CTRL, ~CNT_EN); + + /* read tick count */ + finval = (lv24020lp_read(CNT_H) << 8) | lv24020lp_read(CNT_L); + + /* restore measure mode */ + lv24020lp_write_and(RADIO_CTRL1, ~EN_MEAS); + lv24020lp_write_and(MSRC_SEL, ~type); + + /* convert value */ + if (type == MSS_FM) + finval = scale*finval*256 / duration; + else + finval = scale*finval / duration; + + return (int)finval; +} + +/* set the FM oscillator frequency */ +static void set_frequency(int freq) +{ + int coef, cap_value, osc_value; + int f1, f2, x1, x2; + int count; + + if (!tuner_awake()) + return; + + TUNER_LOG_OPEN(); + + TUNER_LOG("set_frequency(%d)\n", freq); + + enable_afc(false); + + /* MHz -> kHz */ + freq /= 1000; + + TUNER_LOG("Select cap:\n"); + + coef = calculate_coef(freq); + cap_value = interpolate_x(coef, sw_cap_low, sw_cap_high, + coef_00, coef_01); + + osc_value = sw_osc_low; + lv24020lp_write(FM_OSC, osc_value); + + /* Just in case - don't go into infinite loop */ + for (count = 0; count < 30; count++) + { + int y0 = interpolate_y(cap_value, sw_cap_low, sw_cap_high, + coef_00, coef_01); + int y1 = interpolate_y(cap_value, sw_cap_low, sw_cap_high, + coef_10, coef_11); + int coef_fcur, cap_new, coef_cor, range; + + lv24020lp_write(FM_CAP, cap_value); + + range = y1 - y0; + f1 = tuner_measure(MSS_FM, 1, 16); + coef_fcur = calculate_coef(f1); + coef_cor = calculate_coef((f1*1000 + 32*256) / 1000); + y0 = coef_cor; + y1 = y0 + range; + + TUNER_LOG("%d %d %d %d %d %d %d %d\n", + f1, cap_value, coef, coef_fcur, coef_cor, y0, y1, range); + + if (coef >= y0 && coef <= y1) + { + osc_value = interpolate_x(coef, sw_osc_low, sw_osc_high, + y0, y1); + + if (osc_value >= sw_osc_low && osc_value <= sw_osc_high) + break; + } + + cap_new = interpolate_x(coef, cap_value, sw_cap_high, + coef_fcur, coef_01); + + if (cap_new == cap_value) + { + if (coef < coef_fcur) + cap_value++; + else + cap_value--; + } + else + { + cap_value = cap_new; + } + } + + TUNER_LOG("osc_value: %d\n", osc_value); + + TUNER_LOG("Tune:\n"); + + x1 = sw_osc_low, x2 = sw_osc_high; + /* FM_OSC already at SW_OSC low and f1 is already the measured + frequency */ + + do + { + int x2_new; + + lv24020lp_write(FM_OSC, x2); + f2 = tuner_measure(MSS_FM, 1, 16); + + if (abs(f2 - freq) <= 16) + { + TUNER_LOG("%d %d %d %d\n", f1, f2, x1, x2); + break; + } + + x2_new = interpolate_x(freq, x1, x2, f1, f2); + + x1 = x2, f1 = f2, x2 = x2_new; + TUNER_LOG("%d %d %d %d\n", f1, f2, x1, x2); + } + while (x2 != 0); + + if (x2 == 0) + { + /* May still be close enough */ + TUNER_LOG("tuning failed - diff: %d\n", f2 - freq); + } + + enable_afc(true); + + TUNER_LOG("\n"); + + TUNER_LOG_SYNC(); +} + +static void fine_step_tune(int (*setcmp)(int regval), int regval, int step) +{ + /* Registers are not always stable, timeout if best fit not found soon + enough */ + unsigned long abort = current_tick + HZ*2; + int flags = 0; + + while (TIME_BEFORE(current_tick, abort)) + { + int cmp; + + regval = regval + step; + + cmp = setcmp(regval); + + if (cmp == 0) + break; + + step = abs(step); + + if (cmp < 0) + { + flags |= 1; + if (step == 1) + flags |= 4; + } + else + { + step = -step; + flags |= 2; + if (step == -1) + step |= 8; + } + + if ((flags & 0xc) == 0xc) + break; + + if ((flags & 0x3) == 0x3) + { + step /= 2; + if (step == 0) + step = 1; + flags &= ~3; + } + } +} + +static int if_setcmp(int regval) +{ + lv24020lp_write(IF_OSC, regval); + lv24020lp_write(IF_CENTER, regval); + lv24020lp_write(IF_BW, 65*regval/100); + + if_set = tuner_measure(MSS_IF, 1000, 32); + + /* This register is bounces around by a few hundred Hz and doesn't seem + to be precisely tuneable. Just do 110000 +/- 500 since it's not very + critical it seems. */ + if (abs(if_set - 109500) <= 500) + return 0; + + return if_set < 109500 ? -1 : 1; +} + +static int sd_setcmp(int regval) +{ + lv24020lp_write(SD_OSC, regval); + + sd_set = tuner_measure(MSS_SD, 1000, 32); + + if (abs(sd_set - 38300) <= 31) + return 0; + + return sd_set < 38300 ? -1 : 1; +} + +static void set_sleep(bool sleep) +{ + if (sleep || tuner_awake()) + return; + + if ((tuner_status & (TUNER_PRESENT | TUNER_POWERED)) != + (TUNER_PRESENT | TUNER_POWERED)) + return; + + tuner_status |= TUNER_AWAKE; + + enable_afc(false); + + /* 2. Calibrate the IF frequency at 110 kHz: */ + lv24020lp_write_and(RADIO_CTRL2, ~IF_PM_L); + fine_step_tune(if_setcmp, 0x80, 8); + lv24020lp_write_or(RADIO_CTRL2, IF_PM_L); + + /* 3. Calibrate the stereo decoder clock at 38.3 kHz: */ + lv24020lp_write_or(STEREO_CTRL, SD_PM); + fine_step_tune(sd_setcmp, 0x80, 8); + lv24020lp_write_and(STEREO_CTRL, ~SD_PM); + + /* calculate FM tuning coefficients */ + lv24020lp_write(FM_CAP, sw_cap_low); + lv24020lp_write(FM_OSC, sw_osc_low); + coef_00 = calculate_coef(tuner_measure(MSS_FM, 1, 64)); + + lv24020lp_write(FM_CAP, sw_cap_high); + coef_01 = calculate_coef(tuner_measure(MSS_FM, 1, 64)); + + lv24020lp_write(FM_CAP, sw_cap_low); + lv24020lp_write(FM_OSC, sw_osc_high); + coef_10 = calculate_coef(tuner_measure(MSS_FM, 1, 64)); + + lv24020lp_write(FM_CAP, sw_cap_high); + coef_11 = calculate_coef(tuner_measure(MSS_FM, 1, 64)); + + /* set various audio level settings */ + lv24020lp_write(AUDIO_CTRL1, TONE_LVL_SET(0) | VOL_LVL_SET(0)); + lv24020lp_write_or(RADIO_CTRL2, AGCSP); + lv24020lp_write_or(RADIO_CTRL3, VOLSH); + lv24020lp_write(STEREO_CTRL, FMCS_SET(7) | AUTOSSR); + lv24020lp_write(PW_SCTRL, SS_CTRL_SET(3) | SM_CTRL_SET(1) | + PW_RAD); +} + +/** Public interfaces **/ +void lv24020lp_power(bool status) +{ + static const unsigned char tuner_defaults[][2] = + { + /* Block 1 writeable registers */ + { MSRC_SEL, AFC_LVL }, + { FM_OSC, 0x80 }, + { SD_OSC, 0x80 }, + { IF_OSC, 0x80 }, + { CNT_CTRL, CNT1_CLR | SWP_CNT_L }, + { IRQ_MSK, 0x00 }, /* IRQ_LVL -> Low to High */ + { FM_CAP, 0x80 }, + /* { IRQ_OUT, 0x00 }, No action on this register (skip) */ + /* Block 2 writeable registers */ + { RADIO_CTRL1, EN_AFC }, + { IF_CENTER, 0x80 }, + { IF_BW, 65*0x80 / 100 }, /* 65% of IF_OSC */ + { RADIO_CTRL2, IF_PM_L }, + { RADIO_CTRL3, AGC_SLVL | SE_FM }, + { STEREO_CTRL, FMCS_SET(4) | AUTOSSR }, + { AUDIO_CTRL1, TONE_LVL_SET(7) | VOL_LVL_SET(7) }, + { AUDIO_CTRL2, BPFREQ_HIGH }, /* deemphasis 50us */ + { PW_SCTRL, SS_CTRL_SET(3) | SM_CTRL_SET(3) | PW_RAD }, + }; + + unsigned i; + + if (status) + { + tuner_status |= TUNER_POWERED | TUNER_PRESENCE_CHECKED; + + /* if tuner is present, CHIP ID is 0x09 */ + if (lv24020lp_read(CHIP_ID) == 0x09) + { + tuner_status |= TUNER_PRESENT; + + /* After power-up, the LV2400x needs to be initialized as + follows: */ + + /* 1. Write default values to the registers: */ + lv24020lp_regs[BLK_SEL] = 0; /* Force a switch on the first */ + for (i = 0; i < ARRAYLEN(tuner_defaults); i++) + lv24020lp_write(tuner_defaults[i][0], tuner_defaults[i][1]); + + /* Complete the startup calibration if the tuner is woken */ + udelay(100000); + } + } + else + { + /* Power off */ + if (tuner_status & TUNER_PRESENT) + lv24020lp_write_and(PW_SCTRL, ~PW_RAD); + + tuner_status &= ~(TUNER_POWERED | TUNER_AWAKE); + } +} + +int lv24020lp_set(int setting, int value) +{ + int val = 1; + + switch(setting) + { + case RADIO_SLEEP: + set_sleep(value); + break; + + case RADIO_FREQUENCY: + set_frequency(value); + break; + + case RADIO_SCAN_FREQUENCY: + /* TODO: really implement this */ + set_frequency(value); + val = lv24020lp_get(RADIO_TUNED); + break; + + case RADIO_MUTE: + if (value) + lv24020lp_write_and(RADIO_CTRL3, ~AMUTE_L); + else + lv24020lp_write_or(RADIO_CTRL3, AMUTE_L); + break; + + case RADIO_REGION: + { + if (lv24020lp_region_data[value]) + lv24020lp_write_or(AUDIO_CTRL2, DEEMP); + else + lv24020lp_write_and(AUDIO_CTRL2, ~DEEMP); + break; + } + + case RADIO_FORCE_MONO: + if (value) + lv24020lp_write_or(STEREO_CTRL, ST_M); + else + lv24020lp_write_and(STEREO_CTRL, ~ST_M); + break; + + default: + val = -1; + } + + return val; +} + +int lv24020lp_get(int setting) +{ + int val = -1; + + switch(setting) + { + case RADIO_TUNED: + /* TODO: really implement this */ + val = RSS_FS(lv24020lp_read(RADIO_STAT)) < 0x1f; + break; + + case RADIO_STEREO: + val = (lv24020lp_read(RADIO_STAT) & RSS_MS) != 0; + break; + + case RADIO_PRESENT: + { + bool fmstatus = true; + + if (!(tuner_status & TUNER_PRESENCE_CHECKED)) + fmstatus = tuner_power(true); + + val = (tuner_status & TUNER_PRESENT) != 0; + + if (!fmstatus) + tuner_power(false); + break; + } + + /* tuner-specific debug info */ + case LV24020LP_CTRL_STAT: + return lv24020lp_read(CTRL_STAT); + + case LV24020LP_REG_STAT: + return lv24020lp_read(RADIO_STAT); + + case LV24020LP_MSS_FM: + return tuner_measure(MSS_FM, 1, 16); + + case LV24020LP_MSS_IF: + return tuner_measure(MSS_IF, 1000, 16); + + case LV24020LP_MSS_SD: + return tuner_measure(MSS_SD, 1000, 16); + + case LV24020LP_IF_SET: + return if_set; + + case LV24020LP_SD_SET: + return sd_set; + } + + return val; +} +#endif /* BOOTLOADER */ diff --git a/firmware/drivers/tuner/s1a0903x01.c b/firmware/drivers/tuner/s1a0903x01.c new file mode 100644 index 0000000000..cdeba2b3b4 --- /dev/null +++ b/firmware/drivers/tuner/s1a0903x01.c @@ -0,0 +1,172 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * Tuner "middleware" for Samsung S1A0903X01 chip + * + * Copyright (C) 2003 Linus Nielsen Feltzing + * + * All files in this archive are subject to the GNU General Public License. + * See the file COPYING in the source tree root for full license agreement. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#include <stdbool.h> +#include <stdlib.h> +#include "config.h" +#include "kernel.h" +#include "tuner.h" /* tuner abstraction interface */ +#include "fmradio.h" /* physical interface driver */ +#include "mpeg.h" +#include "sound.h" + +#define DEFAULT_IN1 0x100003 /* Mute */ +#define DEFAULT_IN2 0x140884 /* 5kHz, 7.2MHz crystal */ +#define PLL_FREQ_STEP 10000 + +static int fm_in1; +static int fm_in2; +static int fm_present = -1; /* unknown */ + +/* tuner abstraction layer: set something to the tuner */ +int s1a0903x01_set(int setting, int value) +{ + int val = 1; + + switch(setting) + { + case RADIO_SLEEP: + if (!value) + { /* wakeup: just unit */ + fm_in1 = DEFAULT_IN1; + fm_in2 = DEFAULT_IN2; + fmradio_set(1, fm_in1); + fmradio_set(2, fm_in2); + } + /* else we have no sleep mode? */ + break; + + case RADIO_FREQUENCY: + { + int pll_cnt; +#if CONFIG_CODEC == MAS3587F + /* Shift the MAS internal clock away for certain frequencies to + * avoid interference. */ + int pitch = 1000; + + /* 4th harmonic falls in the FM frequency range */ + int if_freq = 4 * mpeg_get_mas_pllfreq(); + + /* shift the mas harmonic >= 300 kHz away using the direction + * which needs less shifting. */ + if (value < if_freq) + { + if (if_freq - value < 300000) + pitch = 1003 - (if_freq - value) / 100000; + } + else + { + if (value - if_freq < 300000) + pitch = 997 + (value - if_freq) / 100000; + } + sound_set_pitch(pitch); +#endif + /* We add the standard Intermediate Frequency 10.7MHz + ** before calculating the divisor + ** The reference frequency is set to 50kHz, and the VCO + ** output is prescaled by 2. + */ + + pll_cnt = (value + 10700000) / (PLL_FREQ_STEP/2) / 2; + + /* 0x100000 == FM mode + ** 0x000002 == Microprocessor controlled Mute + */ + fm_in1 = (fm_in1 & 0xfff00007) | (pll_cnt << 3); + fmradio_set(1, fm_in1); + break; + } + + case RADIO_SCAN_FREQUENCY: + /* Tune in and delay */ + s1a0903x01_set(RADIO_FREQUENCY, value); + sleep(1); + /* Start IF measurement */ + fm_in1 |= 4; + fmradio_set(1, fm_in1); + sleep(1); + val = s1a0903x01_get(RADIO_TUNED); + break; + + case RADIO_MUTE: + fm_in1 = (fm_in1 & 0xfffffffe) | (value?1:0); + fmradio_set(1, fm_in1); + break; + + case RADIO_FORCE_MONO: + fm_in2 = (fm_in2 & 0xfffffffb) | (value?0:4); + fmradio_set(2, fm_in2); + break; + /* NOTE: These were only zeroed when starting the tuner from OFF + but the default values already set them to 0. */ +#if 0 + case S1A0903X01_IF_MEASUREMENT: + fm_in1 = (fm_in1 & 0xfffffffb) | (value?4:0); + fmradio_set(1, fm_in1); + break; + + case S1A0903X01_SENSITIVITY: + fm_in2 = (fm_in2 & 0xffff9fff) | ((value & 3) << 13); + fmradio_set(2, fm_in2); + break; +#endif + default: + val = -1; + } + + return val; +} + +/* tuner abstraction layer: read something from the tuner */ +int s1a0903x01_get(int setting) +{ + int val = -1; + switch(setting) + { + case RADIO_PRESENT: + if (fm_present == -1) + { +#ifdef HAVE_TUNER_PWR_CTRL + bool fmstatus = tuner_power(true); +#endif + /* 5kHz, 7.2MHz crystal, test mode 1 */ + fmradio_set(2, 0x140885); + fm_present = (fmradio_read(0) == 0x140885); +#ifdef HAVE_TUNER_PWR_CTRL + if (!fmstatus) + tuner_power(false); +#endif + } + + val = fm_present; + break; + + case RADIO_TUNED: + val = fmradio_read(3); + val = abs(10700 - ((val & 0x7ffff) / 8)) < 50; /* convert to kHz */ + break; + + case RADIO_STEREO: + val = fmradio_read(3); + val = ((val & 0x100000) ? true : false); + break; + } + return val; +} diff --git a/firmware/drivers/tuner/tea5767.c b/firmware/drivers/tuner/tea5767.c new file mode 100644 index 0000000000..da7cdfb65a --- /dev/null +++ b/firmware/drivers/tuner/tea5767.c @@ -0,0 +1,135 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * Tuner "middleware" for Philips TEA5767 chip + * + * Copyright (C) 2004 Jörg Hohensohn + * + * All files in this archive are subject to the GNU General Public License. + * See the file COPYING in the source tree root for full license agreement. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include "config.h" +#include <stdbool.h> +#include <string.h> +#include <stdlib.h> +#include "kernel.h" +#include "tuner.h" /* tuner abstraction interface */ +#include "fmradio.h" +#include "fmradio_i2c.h" /* physical interface driver */ + +#define I2C_ADR 0xC0 +static unsigned char write_bytes[5] = { 0x00, 0x00, 0x00, 0x00, 0x00 }; + +static void tea5767_set_clear(int byte, unsigned char bits, int set) +{ + write_bytes[byte] &= ~bits; + if (set) + write_bytes[byte] |= bits; +} + +/* tuner abstraction layer: set something to the tuner */ +int tea5767_set(int setting, int value) +{ + switch(setting) + { + case RADIO_SLEEP: + /* init values */ + write_bytes[0] |= (1<<7); /* mute */ +#if CONFIG_TUNER_XTAL == 32768 + /* 32.768kHz, soft mute, stereo noise cancelling */ + write_bytes[3] |= (1<<4) | (1<<3) | (1<<1); +#else + /* soft mute, stereo noise cancelling */ + write_bytes[3] |= (1<<3) | (1<<1); +#endif + /* sleep / standby mode */ + tea5767_set_clear(3, (1<<6), value); + break; + + case RADIO_FREQUENCY: + { + int n; +#if CONFIG_TUNER_XTAL == 32768 + n = (4 * (value - 225000) + 16384) / 32768; +#else + n = (4 * (value - 225000)) / 50000; +#endif + write_bytes[0] = (write_bytes[0] & 0xC0) | (n >> 8); + write_bytes[1] = n; + } + break; + + case RADIO_SCAN_FREQUENCY: + tea5767_set(RADIO_FREQUENCY, value); + sleep(HZ/30); + return tea5767_get(RADIO_TUNED); + + case RADIO_MUTE: + tea5767_set_clear(0, 0x80, value); + break; + + case RADIO_REGION: + { + const struct tea5767_region_data *rd = + &tea5767_region_data[value]; + + tea5767_set_clear(4, (1<<6), rd->deemphasis); + tea5767_set_clear(3, (1<<5), rd->band); + break; + } + case RADIO_FORCE_MONO: + tea5767_set_clear(2, 0x08, value); + break; + default: + return -1; + } + + fmradio_i2c_write(I2C_ADR, write_bytes, sizeof(write_bytes)); + return 1; +} + +/* tuner abstraction layer: read something from the tuner */ +int tea5767_get(int setting) +{ + unsigned char read_bytes[5]; + int val = -1; /* default for unsupported query */ + + fmradio_i2c_read(I2C_ADR, read_bytes, sizeof(read_bytes)); + + switch(setting) + { + case RADIO_PRESENT: + val = 1; /* true */ + break; + + case RADIO_TUNED: + val = 0; + if (read_bytes[0] & 0x80) /* ready */ + { + val = read_bytes[2] & 0x7F; /* IF counter */ + val = (abs(val - 0x36) < 2); /* close match */ + } + break; + + case RADIO_STEREO: + val = read_bytes[2] >> 7; + break; + } + + return val; +} + +void tea5767_dbg_info(struct tea5767_dbg_info *info) +{ + fmradio_i2c_read(I2C_ADR, info->read_regs, 5); + memcpy(info->write_regs, write_bytes, 5); +} |