diff options
| -rw-r--r-- | firmware/drivers/lcd-h100.c | 915 |
1 files changed, 915 insertions, 0 deletions
diff --git a/firmware/drivers/lcd-h100.c b/firmware/drivers/lcd-h100.c new file mode 100644 index 0000000000..df4ca42b10 --- /dev/null +++ b/firmware/drivers/lcd-h100.c @@ -0,0 +1,915 @@ +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2004 by Linus Nielsen Feltzing + * + * All files in this archive are subject to the GNU General Public License. + * See the file COPYING in the source tree root for full license agreement. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ +#include "config.h" + +#ifdef HAVE_LCD_BITMAP + +#include "cpu.h" +#include "lcd.h" +#include "kernel.h" +#include "thread.h" +#include <string.h> +#include <stdlib.h> +#include "file.h" +#include "debug.h" +#include "system.h" +#include "font.h" + +/*** definitions ***/ + +/* LCD command codes */ +#define LCD_CNTL_ON_OFF 0xae +#define LCD_CNTL_OFF_MODE 0xbe +#define LCD_CNTL_REVERSE 0xa6 +#define LCD_CNTL_ALL_LIGHTING 0xa4 +#define LCD_CNTL_COMMON_OUTPUT_STATUS 0xc4 +#define LCD_CNTL_COLUMN_ADDRESS_DIR 0xa0 +#define LCD_CNTL_NLINE_ON_OFF 0xe4 +#define LCD_CNTL_DISPLAY_MODE 0x66 +#define LCD_CNTL_ELECTRIC_VOLUME 0x81 +#define LCD_CNTL_DISPLAY_START_LINE 0x8a + +#define LCD_CNTL_PAGE 0xb1 +#define LCD_CNTL_COLUMN 0x13 +#define LCD_CNTL_DATA_WRITE 0x1d + +#define SCROLL_SPACING 3 + +#define SCROLLABLE_LINES 13 + +struct scrollinfo { + char line[MAX_PATH + LCD_WIDTH/2 + SCROLL_SPACING + 2]; + int len; /* length of line in chars */ + int width; /* length of line in pixels */ + int offset; + int startx; + bool backward; /* scroll presently forward or backward? */ + bool bidir; + bool invert; /* invert the scrolled text */ + long start_tick; +}; + +static volatile int scrolling_lines=0; /* Bitpattern of which lines are scrolling */ + +static void scroll_thread(void); +static char scroll_stack[DEFAULT_STACK_SIZE]; +static const char scroll_name[] = "scroll"; +static char scroll_ticks = 12; /* # of ticks between updates*/ +static int scroll_delay = HZ/2; /* ticks delay before start */ +static char scroll_step = 6; /* pixels per scroll step */ +static int bidir_limit = 50; /* percent */ +static struct scrollinfo scroll[SCROLLABLE_LINES]; +static int xmargin = 0; +static int ymargin = 0; +static int curfont = FONT_SYSFIXED; +#ifndef SIMULATOR +static int xoffset = 0; /* needed for flip */ +#endif + +unsigned char lcd_framebuffer[LCD_HEIGHT/8][LCD_WIDTH]; + +/* All zeros and ones bitmaps for area filling */ +static const unsigned char zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; +static const unsigned char ones[8] = { 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff}; + +int lcd_default_contrast(void) +{ + return 32; +} + +#ifdef SIMULATOR + +void lcd_init(void) +{ + create_thread(scroll_thread, scroll_stack, + sizeof(scroll_stack), scroll_name); +} + +#else + +/* + * Initialize LCD + */ +void lcd_init (void) +{ + /* GPO35 is the LCD A0 pin */ + GPIO1_FUNCTION |= 0x00000008; + GPIO1_ENABLE |= 0x00000008; + GPIO1_OUT |= 0x00000008; + + lcd_write_command(LCD_CNTL_ON_OFF | 1); /* LCD ON */ + lcd_write_command(LCD_CNTL_COLUMN_ADDRESS_DIR | 0); /* Normal */ + lcd_write_command(LCD_CNTL_COMMON_OUTPUT_STATUS | 1); /* Reverse dir */ + lcd_write_command(LCD_CNTL_REVERSE | 0); /* Reverse OFF */ + lcd_write_command(LCD_CNTL_ALL_LIGHTING | 0); /* Normal */ + lcd_write_command(LCD_CNTL_OFF_MODE | 1); /* OFF -> VCC on drivers */ + lcd_write_command(LCD_CNTL_NLINE_ON_OFF | 1); /* N-line ON */ + + lcd_write_command_ex(LCD_CNTL_DISPLAY_MODE, 1); /* Monochrome mode */ + + lcd_clear_display(); + lcd_update(); + + create_thread(scroll_thread, scroll_stack, + sizeof(scroll_stack), scroll_name); +} + + +/* Performance function that works with an external buffer + note that y and height are in 8-pixel units! */ +void lcd_blit (const unsigned char* p_data, int x, int y, int width, + int height, int stride) +{ + /* Copy display bitmap to hardware */ + while (height--) + { + lcd_write_command_ex(LCD_CNTL_PAGE, y++ & 0xf); + lcd_write_command_ex(LCD_CNTL_COLUMN, x+xoffset); + + lcd_write_command(LCD_CNTL_DATA_WRITE); + lcd_write_data(p_data, width); + p_data += stride; + } +} + + +/* + * Update the display. + * This must be called after all other LCD functions that change the display. + */ +void lcd_update (void) __attribute__ ((section (".icode"))); +void lcd_update (void) +{ + int y; + + /* Copy display bitmap to hardware */ + for (y = 0; y < LCD_HEIGHT/8; y++) + { + lcd_write_command_ex(LCD_CNTL_PAGE, y); + lcd_write_command_ex(LCD_CNTL_COLUMN, 0); + + lcd_write_command(LCD_CNTL_DATA_WRITE); + lcd_write_data (lcd_framebuffer[y], LCD_WIDTH); + } +} + +/* + * Update a fraction of the display. + */ +void lcd_update_rect (int, int, int, int) __attribute__ ((section (".icode"))); +void lcd_update_rect (int x_start, int y, + int width, int height) +{ + int ymax; + + /* The Y coordinates have to work on even 8 pixel rows */ + ymax = (y + height-1)/8; + y /= 8; + + if(x_start + width > LCD_WIDTH) + width = LCD_WIDTH - x_start; + if (width <= 0) + return; /* nothing left to do, 0 is harmful to lcd_write_data() */ + if(ymax >= LCD_HEIGHT/8) + ymax = LCD_HEIGHT/8-1; + + /* Copy specified rectange bitmap to hardware */ + for (; y <= ymax; y++) + { + lcd_write_command_ex(LCD_CNTL_PAGE, y); + lcd_write_command_ex(LCD_CNTL_COLUMN, x_start+xoffset); + + lcd_write_command(LCD_CNTL_DATA_WRITE); + lcd_write_data (&lcd_framebuffer[y][x_start], width); + } +} + +void lcd_set_contrast(int val) +{ + lcd_write_command_ex(LCD_CNTL_ELECTRIC_VOLUME, val); +} + +void lcd_set_invert_display(bool yesno) +{ + lcd_write_command(LCD_CNTL_REVERSE | (yesno?1:0)); +} + +/* turn the display upside down (call lcd_update() afterwards) */ +void lcd_set_flip(bool yesno) +{ + if (yesno) + { + lcd_write_command(LCD_CNTL_COLUMN_ADDRESS_DIR | 1); + lcd_write_command(LCD_CNTL_COMMON_OUTPUT_STATUS | 0); + xoffset = 160 - LCD_WIDTH; /* 160 colums minus the 160 we have */ + } + else + { + lcd_write_command(LCD_CNTL_COLUMN_ADDRESS_DIR | 0); + lcd_write_command(LCD_CNTL_COMMON_OUTPUT_STATUS | 1); + xoffset = 0; + } +} + +/** + * Rolls up the lcd display by the specified amount of lines. + * Lines that are rolled out over the top of the screen are + * rolled in from the bottom again. This is a hardware + * remapping only and all operations on the lcd are affected. + * -> + * @param int lines - The number of lines that are rolled. + * The value must be 0 <= pixels < LCD_HEIGHT. + */ +void lcd_roll(int lines) +{ + char data[2]; + + lines &= LCD_HEIGHT-1; + data[0] = lines & 0xff; + data[1] = lines >> 8; + + lcd_write_command(LCD_CNTL_DISPLAY_START_LINE); + lcd_write_data(data, 2); +} + +#endif /* SIMULATOR */ + +void lcd_clear_display (void) +{ + memset (lcd_framebuffer, 0, sizeof lcd_framebuffer); + scrolling_lines = 0; +} + +void lcd_setmargins(int x, int y) +{ + xmargin = x; + ymargin = y; +} + +int lcd_getxmargin(void) +{ + return xmargin; +} + +int lcd_getymargin(void) +{ + return ymargin; +} + +void lcd_setfont(int newfont) +{ + curfont = newfont; +} + +int lcd_getstringsize(const unsigned char *str, int *w, int *h) +{ + struct font* pf = font_get(curfont); + int ch; + int width = 0; + + while((ch = *str++)) { + /* check input range*/ + if (ch < pf->firstchar || ch >= pf->firstchar+pf->size) + ch = pf->defaultchar; + ch -= pf->firstchar; + + /* get proportional width and glyph bits*/ + width += pf->width? pf->width[ch]: pf->maxwidth; + } + if ( w ) + *w = width; + if ( h ) + *h = pf->height; + return width; +} + +/* put a string at a given char position */ +void lcd_puts(int x, int y, const unsigned char *str) +{ + lcd_puts_style(x, y, str, STYLE_DEFAULT); +} + +void lcd_puts_style(int x, int y, const unsigned char *str, int style) +{ + int xpos,ypos,w,h; + +#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS) + /* We make the simulator truncate the string if it reaches the right edge, + as otherwise it'll wrap. The real target doesn't wrap. */ + + char buffer[12]; + if(strlen(str)+x > 11 ) { + strncpy(buffer, str, sizeof buffer); + buffer[11-x]=0; + str = buffer; + } + xmargin = 0; + ymargin = 8; +#endif + + /* make sure scrolling is turned off on the line we are updating */ + scrolling_lines &= ~(1 << y); + + if(!str || !str[0]) + return; + + lcd_getstringsize(str, &w, &h); + xpos = xmargin + x*w / strlen(str); + ypos = ymargin + y*h; + lcd_putsxy(xpos, ypos, str); + lcd_clearrect(xpos + w, ypos, LCD_WIDTH - (xpos + w), h); + if (style & STYLE_INVERT) + lcd_invertrect(xpos, ypos, LCD_WIDTH - xpos, h); + +#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS) + lcd_update(); +#endif +} + +/* put a string at a given pixel position, skipping first ofs pixel columns */ +static void lcd_putsxyofs(int x, int y, int ofs, const unsigned char *str) +{ + int ch; + struct font* pf = font_get(curfont); + + while ((ch = *str++) != '\0' && x < LCD_WIDTH) + { + int gwidth, width; + + /* check input range */ + if (ch < pf->firstchar || ch >= pf->firstchar+pf->size) + ch = pf->defaultchar; + ch -= pf->firstchar; + + /* no partial-height drawing for now... */ + if (y + pf->height > LCD_HEIGHT) + break; + + /* get proportional width and glyph bits */ + gwidth = pf->width ? pf->width[ch] : pf->maxwidth; + width = MIN (gwidth, LCD_WIDTH - x); + + if (ofs != 0) + { + if (ofs > width) + { + ofs -= width; + continue; + } + width -= ofs; + } + + if (width > 0) + { + unsigned int i; + const unsigned char* bits = pf->bits + + (pf->offset ? pf->offset[ch] + : ((pf->height + 7) / 8 * pf->maxwidth * ch)); + + if (ofs != 0) + { + for (i = 0; i < pf->height; i += 8) + { + lcd_bitmap (bits + ofs, x, y + i, width, + MIN(8, pf->height - i), true); + bits += gwidth; + } + } + else + lcd_bitmap ((unsigned char*) bits, x, y, gwidth, + pf->height, true); + x += width; + } + ofs = 0; + } +} + +/* put a string at a given pixel position */ +void lcd_putsxy(int x, int y, const unsigned char *str) +{ + lcd_putsxyofs(x, y, 0, str); +} + +/* + * About Rockbox' internal bitmap format: + * + * A bitmap contains one bit for every pixel that defines if that pixel is + * black (1) or white (0). Bits within a byte are arranged vertically, LSB + * at top. + * The bytes are stored in row-major order, with byte 0 being top left, + * byte 1 2nd from left etc. The first row of bytes defines pixel rows + * 0..7, the second row defines pixel row 8..15 etc. + * + * This is the same as the internal lcd hw format. + */ + +/* + * Draw a bitmap at (x, y), size (nx, ny) + * if 'clear' is true, clear destination area first + */ +void lcd_bitmap (const unsigned char *src, int x, int y, int nx, int ny, + bool clear) __attribute__ ((section (".icode"))); +void lcd_bitmap (const unsigned char *src, int x, int y, int nx, int ny, + bool clear) +{ + const unsigned char *src_col; + unsigned char *dst, *dst_col; + unsigned int data, mask1, mask2, mask3, mask4; + int stride, shift; + + if (((unsigned) x >= LCD_WIDTH) || ((unsigned) y >= LCD_HEIGHT)) + return; + + stride = nx; /* otherwise right-clipping will destroy the image */ + + if (((unsigned) (x + nx)) >= LCD_WIDTH) + nx = LCD_WIDTH - x; + if (((unsigned) (y + ny)) >= LCD_HEIGHT) + ny = LCD_HEIGHT - y; + + dst = &lcd_framebuffer[y >> 3][x]; + shift = y & 7; + + if (!shift && clear) /* shortcut for byte aligned match with clear */ + { + while (ny >= 8) /* all full rows */ + { + memcpy(dst, src, nx); + src += stride; + dst += LCD_WIDTH; + ny -= 8; + } + if (ny == 0) /* nothing left to do? */ + return; + /* last partial row to do by default routine */ + } + + ny += shift; + + /* Calculate bit masks */ + mask4 = ~(0xfe << ((ny-1) & 7)); /* data mask for last partial row */ + if (clear) + { + mask1 = ~(0xff << shift); /* clearing of first partial row */ + mask2 = 0; /* clearing of intermediate (full) rows */ + mask3 = ~mask4; /* clearing of last partial row */ + if (ny <= 8) + mask3 |= mask1; + } + else + mask1 = mask2 = mask3 = 0xff; + + /* Loop for each column */ + for (x = 0; x < nx; x++) + { + src_col = src++; + dst_col = dst++; + data = 0; + y = 0; + + if (ny > 8) + { + /* First partial row */ + data = *src_col << shift; + *dst_col = (*dst_col & mask1) | data; + src_col += stride; + dst_col += LCD_WIDTH; + data >>= 8; + + /* Intermediate rows */ + for (y = 8; y < ny-8; y += 8) + { + data |= *src_col << shift; + *dst_col = (*dst_col & mask2) | data; + src_col += stride; + dst_col += LCD_WIDTH; + data >>= 8; + } + } + + /* Last partial row */ + if (y + shift < ny) + data |= *src_col << shift; + *dst_col = (*dst_col & mask3) | (data & mask4); + } +} + +/* + * Draw a rectangle with upper left corner at (x, y) + * and size (nx, ny) + */ +void lcd_drawrect (int x, int y, int nx, int ny) +{ + int i; + + if (x > LCD_WIDTH) + return; + if (y > LCD_HEIGHT) + return; + + if (x + nx > LCD_WIDTH) + nx = LCD_WIDTH - x; + if (y + ny > LCD_HEIGHT) + ny = LCD_HEIGHT - y; + + /* vertical lines */ + for (i = 0; i < ny; i++) { + DRAW_PIXEL(x, (y + i)); + DRAW_PIXEL((x + nx - 1), (y + i)); + } + + /* horizontal lines */ + for (i = 0; i < nx; i++) { + DRAW_PIXEL((x + i),y); + DRAW_PIXEL((x + i),(y + ny - 1)); + } +} + +/* + * Clear a rectangular area at (x, y), size (nx, ny) + */ +void lcd_clearrect (int x, int y, int nx, int ny) +{ + int i; + for (i = 0; i < nx; i++) + lcd_bitmap (zeros, x+i, y, 1, ny, true); +} + +/* + * Fill a rectangular area at (x, y), size (nx, ny) + */ +void lcd_fillrect (int x, int y, int nx, int ny) +{ + int i; + for (i = 0; i < nx; i++) + lcd_bitmap (ones, x+i, y, 1, ny, true); +} + +/* Invert a rectangular area at (x, y), size (nx, ny) */ +void lcd_invertrect (int x, int y, int nx, int ny) +{ + int i, j; + + if (x > LCD_WIDTH) + return; + if (y > LCD_HEIGHT) + return; + + if (x + nx > LCD_WIDTH) + nx = LCD_WIDTH - x; + if (y + ny > LCD_HEIGHT) + ny = LCD_HEIGHT - y; + + for (i = 0; i < nx; i++) + for (j = 0; j < ny; j++) + INVERT_PIXEL((x + i), (y + j)); +} + +/* Reverse the invert setting of the scrolling line (if any) at given char + position. Setting will go into affect next time line scrolls. */ +void lcd_invertscroll(int x, int y) +{ + struct scrollinfo* s; + + (void)x; + + s = &scroll[y]; + s->invert = !s->invert; +} + +void lcd_drawline( int x1, int y1, int x2, int y2 ) +{ + int numpixels; + int i; + int deltax, deltay; + int d, dinc1, dinc2; + int x, xinc1, xinc2; + int y, yinc1, yinc2; + + deltax = abs(x2 - x1); + deltay = abs(y2 - y1); + + if(deltax >= deltay) + { + numpixels = deltax; + d = 2 * deltay - deltax; + dinc1 = deltay * 2; + dinc2 = (deltay - deltax) * 2; + xinc1 = 1; + xinc2 = 1; + yinc1 = 0; + yinc2 = 1; + } + else + { + numpixels = deltay; + d = 2 * deltax - deltay; + dinc1 = deltax * 2; + dinc2 = (deltax - deltay) * 2; + xinc1 = 0; + xinc2 = 1; + yinc1 = 1; + yinc2 = 1; + } + numpixels++; /* include endpoints */ + + if(x1 > x2) + { + xinc1 = -xinc1; + xinc2 = -xinc2; + } + + if(y1 > y2) + { + yinc1 = -yinc1; + yinc2 = -yinc2; + } + + x = x1; + y = y1; + + for(i=0; i<numpixels; i++) + { + DRAW_PIXEL(x,y); + + if(d < 0) + { + d += dinc1; + x += xinc1; + y += yinc1; + } + else + { + d += dinc2; + x += xinc2; + y += yinc2; + } + } +} + +void lcd_clearline( int x1, int y1, int x2, int y2 ) +{ + int numpixels; + int i; + int deltax, deltay; + int d, dinc1, dinc2; + int x, xinc1, xinc2; + int y, yinc1, yinc2; + + deltax = abs(x2 - x1); + deltay = abs(y2 - y1); + + if(deltax >= deltay) + { + numpixels = deltax; + d = 2 * deltay - deltax; + dinc1 = deltay * 2; + dinc2 = (deltay - deltax) * 2; + xinc1 = 1; + xinc2 = 1; + yinc1 = 0; + yinc2 = 1; + } + else + { + numpixels = deltay; + d = 2 * deltax - deltay; + dinc1 = deltax * 2; + dinc2 = (deltax - deltay) * 2; + xinc1 = 0; + xinc2 = 1; + yinc1 = 1; + yinc2 = 1; + } + numpixels++; /* include endpoints */ + + if(x1 > x2) + { + xinc1 = -xinc1; + xinc2 = -xinc2; + } + + if(y1 > y2) + { + yinc1 = -yinc1; + yinc2 = -yinc2; + } + + x = x1; + y = y1; + + for(i=0; i<numpixels; i++) + { + CLEAR_PIXEL(x,y); + + if(d < 0) + { + d += dinc1; + x += xinc1; + y += yinc1; + } + else + { + d += dinc2; + x += xinc2; + y += yinc2; + } + } +} + +/* + * Set a single pixel + */ +void lcd_drawpixel(int x, int y) +{ + DRAW_PIXEL(x,y); +} + +/* + * Clear a single pixel + */ +void lcd_clearpixel(int x, int y) +{ + CLEAR_PIXEL(x,y); +} + +/* + * Invert a single pixel + */ +void lcd_invertpixel(int x, int y) +{ + INVERT_PIXEL(x,y); +} + +void lcd_puts_scroll(int x, int y, const unsigned char *string) +{ + lcd_puts_scroll_style(x, y, string, STYLE_DEFAULT); +} + +void lcd_puts_scroll_style(int x, int y, const unsigned char *string, int style) +{ + struct scrollinfo* s; + int w, h; + + s = &scroll[y]; + + s->start_tick = current_tick + scroll_delay; + s->invert = false; + if (style & STYLE_INVERT) { + s->invert = true; + lcd_puts_style(x,y,string,STYLE_INVERT); + } + else + lcd_puts(x,y,string); + + lcd_getstringsize(string, &w, &h); + + if (LCD_WIDTH - x * 8 - xmargin < w) { + /* prepare scroll line */ + char *end; + + memset(s->line, 0, sizeof s->line); + strcpy(s->line, string); + + /* get width */ + s->width = lcd_getstringsize(s->line, &w, &h); + + /* scroll bidirectional or forward only depending on the string + width */ + if ( bidir_limit ) { + s->bidir = s->width < (LCD_WIDTH - xmargin) * + (100 + bidir_limit) / 100; + } + else + s->bidir = false; + + if (!s->bidir) { /* add spaces if scrolling in the round */ + strcat(s->line, " "); + /* get new width incl. spaces */ + s->width = lcd_getstringsize(s->line, &w, &h); + } + + end = strchr(s->line, '\0'); + strncpy(end, string, LCD_WIDTH/2); + + s->len = strlen(string); + s->offset = 0; + s->startx = x; + s->backward = false; + scrolling_lines |= (1<<y); + } + else + /* force a bit switch-off since it doesn't scroll */ + scrolling_lines &= ~(1<<y); +} + +void lcd_stop_scroll(void) +{ + scrolling_lines=0; +} + +static const char scroll_tick_table[16] = { + /* Hz values: + 1, 1.25, 1.55, 2, 2.5, 3.12, 4, 5, 6.25, 8.33, 10, 12.5, 16.7, 20, 25, 33 */ + 100, 80, 64, 50, 40, 32, 25, 20, 16, 12, 10, 8, 6, 5, 4, 3 +}; + +void lcd_scroll_speed(int speed) +{ + scroll_ticks = scroll_tick_table[speed]; +} + +void lcd_scroll_step(int step) +{ + scroll_step = step; +} + +void lcd_scroll_delay(int ms) +{ + scroll_delay = ms / (HZ / 10); +} + +void lcd_bidir_scroll(int percent) +{ + bidir_limit = percent; +} +static void scroll_thread(void) +{ + struct font* pf; + struct scrollinfo* s; + int index; + int xpos, ypos; + + /* initialize scroll struct array */ + scrolling_lines = 0; + + while ( 1 ) { + for ( index = 0; index < SCROLLABLE_LINES; index++ ) { + /* really scroll? */ + if ( !(scrolling_lines&(1<<index)) ) + continue; + + s = &scroll[index]; + + /* check pause */ + if (TIME_BEFORE(current_tick, s->start_tick)) + continue; + + if (s->backward) + s->offset -= scroll_step; + else + s->offset += scroll_step; + + pf = font_get(curfont); + xpos = xmargin + s->startx * s->width / s->len; + ypos = ymargin + index * pf->height; + + if (s->bidir) { /* scroll bidirectional */ + if (s->offset <= 0) { + /* at beginning of line */ + s->offset = 0; + s->backward = false; + s->start_tick = current_tick + scroll_delay * 2; + } + if (s->offset >= s->width - (LCD_WIDTH - xpos)) { + /* at end of line */ + s->offset = s->width - (LCD_WIDTH - xpos); + s->backward = true; + s->start_tick = current_tick + scroll_delay * 2; + } + } + else { + /* scroll forward the whole time */ + if (s->offset >= s->width) + s->offset %= s->width; + } + + lcd_clearrect(xpos, ypos, LCD_WIDTH - xpos, pf->height); + lcd_putsxyofs(xpos, ypos, s->offset, s->line); + if (s->invert) + lcd_invertrect(xpos, ypos, LCD_WIDTH - xpos, pf->height); + lcd_update_rect(xpos, ypos, LCD_WIDTH - xpos, pf->height); + } + + sleep(scroll_ticks); + } +} + +#endif |