Manual updates

Correct gramatics, missing spacing, typos, etc.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23788 a1c6a512-1295-4272-9138-f99709370657

8 files changed, 27 insertions, 25 deletions

diff --git a/manual/configure_rockbox/display_options.tex b/manual/configure_rockbox/display_options.tex
index 01fb66c63a..f416e8418e 100644
--- a/manual/configure_rockbox/display_options.tex
+++ b/manual/configure_rockbox/display_options.tex
@@ -44,11 +44,11 @@
       \opt{backlight_fade_bool}{
         \item[Backlight Fade In.]
         This options turns on smooth backlight fading when the backlight is
-        turning on. The fading time may dependent on the brightness level you
+        turning on. The fading time is dependent on the brightness level you
         have chosen. If it is turned off, the backlight will turn on immediately.
         \item[Backlight Fade Out.]
         This options turns on smooth backlight fading when the backlight is
-        turning off. The fading time may dependent on the brightness level you
+        turning off. The fading time is dependent on the brightness level you
         have chosen. If it is turned off, the backlight will turn off immediately.
       }
       \item[First Keypress Enables Backlight Only.]
diff --git a/manual/configure_rockbox/recording_settings.tex b/manual/configure_rockbox/recording_settings.tex
index 036450accd..ab39ea54c5 100644
--- a/manual/configure_rockbox/recording_settings.tex
+++ b/manual/configure_rockbox/recording_settings.tex
@@ -51,7 +51,7 @@
         22.05kHz, 16kHz, 12kHz, 11.025kHz and 8kHz}
     are available. Higher sample rates use up more disk space, but give better
     sound quality.
-    \opt{swcodec}{\note{The 11.025kHz setting is not available when using%
+    \opt{swcodec}{\note{The 11.025kHz setting is not available when using %
       \setting{MPEG Layer 3} format.}
     }%
     \opt{masf}{
@@ -170,11 +170,11 @@
 	
   \item[Prerecord Time.]
     This specifies the time that is included into the recording before the
-	trigger event occurs. This is very useful if you record a signal that fades
-	in. Usually you want to set the prerecord time >= start duration. That
-	ensures that you record the entire sound. Strictly speaking the prerecord
-	time is not a special parameter of the trigger. It is available during normal
-	recordings too.  
+	trigger event occurs. This is very useful if you record a signal that
+       fades in. Usually you want to set the prerecord time greater than or
+	equal to the start duration. That ensures that you record the entire
+	sound. Strictly speaking the prerecord time is not a special parameter
+	of the trigger. It is available during normal recordings too.
 	
   \item[Start Above.]
 	The start threshold defines the minimal volume a sound must have to start the
diff --git a/manual/configure_rockbox/theme_settings.tex b/manual/configure_rockbox/theme_settings.tex
index 725bc50a40..1fc24b2317 100644
--- a/manual/configure_rockbox/theme_settings.tex
+++ b/manual/configure_rockbox/theme_settings.tex
@@ -55,10 +55,10 @@ customize the visual apperance of Rockbox.
 
 \item[While Playing Screen.]
   Opens the \setting{File Browser} in the \fname{/.rockbox/wps} directory and
-  displays all \fname{.wps} files. Selecting one will activate it, stop will
-  exit back to the menu. For further information about the WPS see 
-  \reference{ref:WPS}. For information about editing a .wps file see
-  \reference{ref:ConfiguringtheWPS}.
+  displays all \fname{.wps} files. Selecting one will activate it,
+  \ActionStdCancel will exit back to the menu. For further information
+  about the WPS see \reference{ref:WPS}. For information about editing
+  a .wps file see \reference{ref:ConfiguringtheWPS}.
 
 \opt{HAVE_REMOTE_LCD}{
   \item[Remote While Playing Screen.]
diff --git a/manual/getting_started/installation.tex b/manual/getting_started/installation.tex
index d6ba4eaa26..a32027d5f2 100644
--- a/manual/getting_started/installation.tex
+++ b/manual/getting_started/installation.tex
@@ -111,7 +111,7 @@ follow the instructions at
     \setting{Settings $\rightarrow$ USB Mode} to \setting{MSC} from within the
     original firmware.}
 
-    \nopt{SansaAMS}{\warn{Never extract files to your \dap{} while it is in recovery mode.}}
+    \nopt{sansaAMS}{\warn{Never extract files to your \dap{} while it is in recovery mode.}}
   }
   \opt{h10,h10_5gb}{
     The installation requires you to use UMS mode and so
diff --git a/manual/main_menu/fmradio.tex b/manual/main_menu/fmradio.tex
index 70fb1499d6..2cfe73a5a6 100644
--- a/manual/main_menu/fmradio.tex
+++ b/manual/main_menu/fmradio.tex
@@ -38,7 +38,7 @@
           %
           Long \ActionFMPrev, \ActionFMNext
           \opt{HAVEREMOTEKEYMAP}{& Long \ActionRCFMPrev, Long \ActionRCFMNext}
-          & Seek to next station or preset in \setting{SCAN} mode.\\
+          & Seek to next station in \setting{SCAN} mode.\\
           %
           \ActionFMSettingsInc, \ActionFMSettingsDec
           \opt{HAVEREMOTEKEYMAP}{
@@ -101,7 +101,7 @@
         \nopt{ONDIO_PAD}{\ActionFMPreset} to go to the presets list.
         Use \ActionFMSettingsInc{} and \ActionFMSettingsDec{}
         to move the cursor and then press \ActionStdOk{}
-        to select. Use \ButtonLeft{} to leave the preset without selecting
+        to select. Use \ButtonLeft{} to leave the preset list without selecting
         anything.
 
   \item[Removing a preset:]
diff --git a/manual/main_menu/main.tex b/manual/main_menu/main.tex
index 6eb539c718..4b0e409d85 100644
--- a/manual/main_menu/main.tex
+++ b/manual/main_menu/main.tex
@@ -98,10 +98,10 @@ stopped or paused and there is something to resume (see \reference{ref:WPS}).
 
 \section{Settings}
 
-The \setting{Settings} menu allows to set or adjust many parameters that affect
-the way your \dap{} works. There are many submenus for different parameter
-areas. Every time you are setting a value of a parameter, and that value is
-selected from a list of some predefined available values, you can press
+The \setting{Settings} menu allows you to set or adjust many parameters that
+affect the way your \dap{} works. There are many submenus for different
+parameter areas. Every time you are setting a value of a parameter, and that
+value is selected from a list of some predefined available values, you can press
 \ActionStdContext, and the selection cursor will jump to the default value for
 the parameter. You can then confirm or cancel the value. This is useful if you
 have changed the value of the parameter from the default to some other value and
diff --git a/manual/rockbox_interface/main.tex b/manual/rockbox_interface/main.tex
index 834a039053..04045a984d 100644
--- a/manual/rockbox_interface/main.tex
+++ b/manual/rockbox_interface/main.tex
@@ -677,8 +677,8 @@ your \dap{}.
 \note{Some of the themes shipped with Rockbox need additional
 fonts from the fonts package, so make sure you installed them.
 Also, if you downloaded additional themes from the Internet make sure you
-have the needed fonts installed as otherwise the theme may get displayed
-garbled.}
+have the needed fonts installed as otherwise the theme may not display
+properly.}
 }
 
 \opt{usb_charging}
diff --git a/manual/rockbox_interface/wps.tex b/manual/rockbox_interface/wps.tex
index 2c8ecfa17d..7ea0f3df70 100644
--- a/manual/rockbox_interface/wps.tex
+++ b/manual/rockbox_interface/wps.tex
@@ -5,7 +5,7 @@ currently playing audio file.
 %
 \opt{lcd_bitmap}{%
   The appearance of the WPS can be configured using WPS configuration files.
-  The items shown depend on your configuration -- all item can be turned on
+  The items shown depend on your configuration -- all items can be turned on
   or off independently. Refer to \reference{ref:wps_tags} for details on how
   to change the display of the WPS.
   \begin{itemize}
@@ -258,10 +258,12 @@ This screen is accessible from the WPS screen, and provides a detailed view of
 all the identity information about the current track. This info is known as
 meta data and is stored in audio file formats to keep information on artist,
 album etc. To access this screen, % 
-\opt{PLAYER_PAD,RECORDER_PAD,IRIVER_H100_PAD,IRIVER_H300_PAD,IRIVER_H10_PAD}{
+\opt{PLAYER_PAD,RECORDER_PAD,IRIVER_H100_PAD,IRIVER_H300_PAD,IRIVER_H10_PAD,%
+      MROBE100_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,SANSA_E200_PAD,SANSA_FUZE_PAD,%
+      GIGABEAT_PAD,GIGABEAT_S_PAD}{
   press \ActionWpsIdThreeScreen. }%
-\opt{ONDIO_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IAUDIO_X5_PAD}{press \ActionWpsContext{}
-  to access the \setting{WPS Context Menu} and select
+\opt{ONDIO_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IAUDIO_X5_PAD,IAUDIO_M3_PAD}{press
+  \ActionWpsContext{} to access the \setting{WPS Context Menu} and select
   \setting{Show Track Info}. }%
 \opt{RECORDER_PAD,PLAYER_PAD,ONDIO_PAD}{Use \ButtonLeft\ and \ButtonRight\
   to move through the information.}%