Remove some unused code in the Philips SA9200 port.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19573 a1c6a512-1295-4272-9138-f99709370657

2 files changed, 2 insertions, 88 deletions

diff --git a/firmware/target/arm/philips/sa9200/adc-target.h b/firmware/target/arm/philips/sa9200/adc-target.h
index ab7d5d92ed..007a11af10 100644
--- a/firmware/target/arm/philips/sa9200/adc-target.h
+++ b/firmware/target/arm/philips/sa9200/adc-target.h
@@ -21,25 +21,7 @@
 #ifndef _ADC_TARGET_H_
 #define _ADC_TARGET_H_
 
-/* ADC channels */
-#define NUM_ADC_CHANNELS 13
-
-#define ADC_BVDD         0  /* Battery voltage of 4V LiIo accumulator */
-#define ADC_RTCSUP       1  /* RTC backup battery voltage */
-#define ADC_UVDD         2  /* USB host voltage */
-#define ADC_CHG_IN       3  /* Charger input voltage */
-#define ADC_CVDD         4  /* Charger pump output voltage */
-#define ADC_BATTEMP      5  /* Battery charging temperature */
-#define ADC_MICSUP1      6  /* Voltage on MicSup1 for remote control
-                                or external voltage measurement */
-#define ADC_MICSUP2      7  /* Voltage on MicSup1 for remote control
-                                or external voltage measurement */
-#define ADC_VBE1         8  /* Measuring junction temperature @ 2uA */
-#define ADC_VBE2         9  /* Measuring junction temperature @ 1uA */
-#define ADC_I_MICSUP1    10 /* Current of MicSup1 for remote control detection */
-#define ADC_I_MICSUP2    11 /* Current of MicSup2 for remote control detection */
-#define ADC_VBAT         12 /* Single cell battery voltage */
-
-#define ADC_UNREG_POWER  ADC_BVDD   /* For compatibility */
+/* The ADC sources and channels are common to all targets with AS3514 */
+#include "as3514.h"
 
 #endif
diff --git a/firmware/target/arm/philips/sa9200/power-sa9200.c b/firmware/target/arm/philips/sa9200/power-sa9200.c
index 654beee064..2b42379cae 100644
--- a/firmware/target/arm/philips/sa9200/power-sa9200.c
+++ b/firmware/target/arm/philips/sa9200/power-sa9200.c
@@ -63,71 +63,3 @@ void ide_power_enable(bool on)
 {
     (void)on;
 }
-
-#if CONFIG_TUNER
-
-/** Tuner **/
-static bool powered = false;
-
-bool tuner_power(bool status)
-{
-    bool old_status;
-    lv24020lp_lock();
-
-    old_status = powered;
-
-    if (status != old_status)
-    {
-        if (status)
-        {
-            /* init mystery amplification device */
-#if defined(SANSA_E200)
-            GPO32_ENABLE |= 0x1;
-#else /* SANSA_C200 */
-            DEV_INIT2 &= ~0x800;
-#endif
-            udelay(5);
-
-            /* When power up, host should initialize the 3-wire bus
-               in host read mode: */
-
-            /* 1. Set direction of the DATA-line to input-mode. */
-            GPIOH_OUTPUT_EN &= ~(1 << 5); 
-            GPIOH_ENABLE |= (1 << 5); 
-
-            /* 2. Drive NR_W low */
-            GPIOH_OUTPUT_VAL &= ~(1 << 3); 
-            GPIOH_OUTPUT_EN |= (1 << 3); 
-            GPIOH_ENABLE |= (1 << 3); 
-
-            /* 3. Drive CLOCK high */
-            GPIOH_OUTPUT_VAL |= (1 << 4); 
-            GPIOH_OUTPUT_EN |= (1 << 4); 
-            GPIOH_ENABLE |= (1 << 4);
-
-            lv24020lp_power(true);
-        }
-        else
-        {
-            lv24020lp_power(false);
-
-            /* set all as inputs */
-            GPIOH_OUTPUT_EN &= ~((1 << 5) | (1 << 3) | (1 << 4));
-            GPIOH_ENABLE &= ~((1 << 3) | (1 << 4)); 
-
-            /* turn off mystery amplification device */
-#if defined (SANSA_E200)
-            GPO32_ENABLE &= ~0x1;
-#else
-            DEV_INIT2 |= 0x800;
-#endif
-        }
-
-        powered = status;
-    }
-
-    lv24020lp_unlock();
-    return old_status;
-}
-
-#endif /* CONFIG_TUNER */