Add the Sansa c100 as a build target with basic drivers.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657

10 files changed, 648 insertions, 7 deletions

diff --git a/firmware/SOURCES b/firmware/SOURCES
index 88e48bb226..1a01fd5af4 100644
--- a/firmware/SOURCES
+++ b/firmware/SOURCES
@@ -972,7 +972,26 @@ target/arm/tcc77x/debug-tcc77x.c
 target/arm/tcc77x/pcm-tcc77x.c
 #endif /* BOOTLOADER */
 #endif /* SIMULATOR */
-#endif /* LOGIK_DAX */
+#endif /* SANSA_M200 */
+
+#ifdef SANSA_C100
+#ifndef SIMULATOR
+target/arm/tcc77x/adc-tcc77x.c
+target/arm/tcc77x/ata-nand-tcc77x.c
+target/arm/tcc77x/kernel-tcc77x.c
+target/arm/tcc77x/c100/lcd-S6B33B2.c
+target/arm/tcc77x/powermgmt-tcc77x.c
+target/arm/tcc77x/system-tcc77x.c
+target/arm/tcc77x/timer-tcc77x.c
+target/arm/tcc77x/usb-tcc77x.c
+target/arm/tcc77x/c100/button-c100.c
+target/arm/tcc77x/c100/power-c100.c
+#ifndef BOOTLOADER
+target/arm/tcc77x/debug-tcc77x.c
+target/arm/tcc77x/pcm-tcc77x.c
+#endif /* BOOTLOADER */
+#endif /* SIMULATOR */
+#endif /* SANSA_C100 */
 
 #ifdef IAUDIO_7
 #ifndef SIMULATOR
diff --git a/firmware/export/config-m200.h b/firmware/export/config-m200.h
index 760474d628..e3cb42e403 100644
--- a/firmware/export/config-m200.h
+++ b/firmware/export/config-m200.h
@@ -4,7 +4,7 @@
 #define TARGET_TREE /* this target is using the target tree system */
 
 /* For Rolo and boot loader */
-#define MODEL_NUMBER 28
+#define MODEL_NUMBER 29
 
 /* define this if you have recording possibility */
 //#define HAVE_RECORDING
diff --git a/firmware/export/config.h b/firmware/export/config.h
index c7e204c5df..c0e2b43d97 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -51,6 +51,7 @@
 #define DSC25          25
 #define DM320         320
 #define IMX31L         31
+#define TCC770        770
 #define TCC771L       771
 #define TCC773L       773
 #define TCC7801      7801
@@ -83,6 +84,7 @@
 #define SANSA_M200_PAD     25
 #define CREATIVEZV_PAD     26
 #define PHILIPS_SA9200_PAD 27
+#define SANSA_C100_PAD     28
 
 /* CONFIG_REMOTE_KEYPAD */
 #define H100_REMOTE 1
@@ -122,6 +124,7 @@
 #define LCD_TL0350A  23 /* as used by the iAudio M3 remote, treated as main LCD */
 #define LCD_COWOND2  24 /* as used by Cowon D2 - LTV250QV, TCC7801 driver */
 #define LCD_SA9200   25 /* as used by the Philips SA9200 */
+#define LCD_S6B33B2  26 /* as used by the Sansa c100 */
 
 /* LCD_PIXELFORMAT */
 #define HORIZONTAL_PACKING 1
@@ -262,6 +265,8 @@
 #include "config-creativezv.h"
 #elif defined(PHILIPS_SA9200)
 #include "config-sa9200.h"
+#elif defined(SANSA_C100)
+#include "config-c100.h"
 #else
 /* no known platform */
 #endif
@@ -391,7 +396,7 @@
 #endif
 
 /* define for all cpus from TCC77X family */
-#if (CONFIG_CPU == TCC771L) || (CONFIG_CPU == TCC773L)
+#if (CONFIG_CPU == TCC771L) || (CONFIG_CPU == TCC773L) || (CONFIG_CPU == TCC770)
 #define CPU_TCC77X
 #endif
 
diff --git a/firmware/target/arm/tcc77x/c100/adc-target.h b/firmware/target/arm/tcc77x/c100/adc-target.h
new file mode 100644
index 0000000000..a4dcab437e
--- /dev/null
+++ b/firmware/target/arm/tcc77x/c100/adc-target.h
@@ -0,0 +1,24 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id: adc-target.h 15339 2007-10-28 11:08:10Z dave $
+ *
+ * Copyright (C) 2007 Dave Chapman
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef _ADC_TARGET_H_
+#define _ADC_TARGET_H_
+
+#define NUM_ADC_CHANNELS 8
+
+#endif /* _ADC_TARGET_H_ */
diff --git a/firmware/target/arm/tcc77x/c100/backlight-target.h b/firmware/target/arm/tcc77x/c100/backlight-target.h
new file mode 100644
index 0000000000..fefd5bc5dc
--- /dev/null
+++ b/firmware/target/arm/tcc77x/c100/backlight-target.h
@@ -0,0 +1,38 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id: backlight-target.h 15599 2007-11-12 18:49:53Z amiconn $
+ *
+ * Copyright (C) 2007 by Dave Chapman
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#ifndef BACKLIGHT_TARGET_H
+#define BACKLIGHT_TARGET_H
+
+#include "tcc77x.h"
+
+#define _backlight_init() true
+
+static inline void _backlight_on(void)
+{
+    /* Enable backlight */
+    GPIOE |= 0x2;
+}
+
+static inline void _backlight_off(void)
+{
+    /* Disable backlight */
+    GPIOE &= ~0x2;
+}
+
+#endif
diff --git a/firmware/target/arm/tcc77x/c100/button-c100.c b/firmware/target/arm/tcc77x/c100/button-c100.c
new file mode 100644
index 0000000000..0183a833ae
--- /dev/null
+++ b/firmware/target/arm/tcc77x/c100/button-c100.c
@@ -0,0 +1,62 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id: button-logikdax.c 15396 2007-11-01 23:38:57Z dave $
+ *
+ * Copyright (C) 2007 by Dave Chapman
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "config.h"
+#include "cpu.h"
+#include "button.h"
+#include "adc.h"
+
+void button_init_device(void)
+{
+    GPIOA_DIR |= 0xC;
+}
+
+int button_read_device(void)
+{
+    int btn = BUTTON_NONE;
+	
+	if (!button_hold()){
+        GPIOA |= 0x4;
+        GPIOA &= ~0x8;
+    	
+        int i=20; while (i--);
+        	    
+        if (GPIOA & 0x10) btn |= BUTTON_PLAYPAUSE; /* up */
+        if (GPIOA & 0x20) btn |= BUTTON_RIGHT;
+        if (GPIOA & 0x40) btn |= BUTTON_LEFT;
+
+        GPIOA |= 0x8;
+        GPIOA &= ~0x4;
+	
+        i=20; while (i--);
+	
+        if (GPIOA & 0x10) btn |= BUTTON_VOLUP;
+        if (GPIOA & 0x20) btn |= BUTTON_VOLDOWN;
+        if (GPIOA & 0x40) btn |= BUTTON_REPEATAB; /* down */
+	
+        if (GPIOA & 0x80) btn |= BUTTON_SELECT;  
+        if (GPIOA & 0x100) btn |= BUTTON_MENU;
+	}
+	return btn;
+}
+
+bool button_hold(void)
+{
+    return (GPIOA & 0x2);
+}
diff --git a/firmware/target/arm/tcc77x/c100/button-target.h b/firmware/target/arm/tcc77x/c100/button-target.h
new file mode 100644
index 0000000000..139be97b55
--- /dev/null
+++ b/firmware/target/arm/tcc77x/c100/button-target.h
@@ -0,0 +1,52 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id: button-target.h 15396 2007-11-01 23:38:57Z dave $
+ *
+ * Copyright (C) 2007 by Dave Chapman
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#ifndef _BUTTON_TARGET_H_
+#define _BUTTON_TARGET_H_
+
+#include <stdbool.h>
+#include "config.h"
+
+#define HAS_BUTTON_HOLD
+
+void button_init_device(void);
+int button_read_device(void);
+bool button_hold(void);
+
+/* Main unit's buttons */
+#define BUTTON_MENU         0x00000001
+#define BUTTON_VOLUP        0x00000002
+#define BUTTON_VOLDOWN      0x00000004
+#define BUTTON_PLAYPAUSE    0x00000008
+#define BUTTON_REPEATAB     0x00000010
+#define BUTTON_LEFT         0x00000020
+#define BUTTON_RIGHT        0x00000040
+#define BUTTON_SELECT       0x00000080
+
+#define BUTTON_MAIN (BUTTON_MENU|BUTTON_VOLUP|BUTTON_VOLDOWN\
+                    |BUTTON_PLAYPAUSE|BUTTON_REPEATAB|BUTTON_LEFT\
+                    |BUTTON_RIGHT|BUTTON_SELECT)
+
+#define BUTTON_REMOTE 0
+
+/* Software power-off */
+#define POWEROFF_BUTTON BUTTON_MENU
+#define POWEROFF_COUNT 40
+                
+#endif /* _BUTTON_TARGET_H_ */
diff --git a/firmware/target/arm/tcc77x/c100/lcd-S6B33B2.c b/firmware/target/arm/tcc77x/c100/lcd-S6B33B2.c
new file mode 100644
index 0000000000..79e14aba70
--- /dev/null
+++ b/firmware/target/arm/tcc77x/c100/lcd-S6B33B2.c
@@ -0,0 +1,349 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id: lcd-S6B33B2.c 16981 2008-06-09 04:34:57Z jethead71 $
+ *
+ * Copyright (C) 2007 by Mark Arigo
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "config.h"
+#include "cpu.h"
+#include "lcd.h"
+#include "kernel.h"
+#include "system.h"
+
+/* Display status */
+static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0;
+
+/* LCD command set for Samsung S6B33B2 */
+
+#define R_NOP                  0x00
+#define R_OSCILLATION_MODE     0x02
+#define R_DRIVER_OUTPUT_MODE   0x10
+#define R_DCDC_SET             0x20
+#define R_BIAS_SET             0x22
+#define R_DCDC_CLOCK_DIV       0x24
+#define R_DCDC_AMP_ONOFF       0x26
+#define R_TEMP_COMPENSATION    0x28
+#define R_CONTRAST_CONTROL1    0x2a
+#define R_CONTRAST_CONTROL2    0x2b
+#define R_STANDBY_OFF          0x2c
+#define R_STANDBY_ON           0x2d
+#define R_DDRAM_BURST_OFF      0x2e
+#define R_DDRAM_BURST_ON       0x2f
+#define R_ADDRESSING_MODE      0x30
+#define R_ROW_VECTOR_MODE      0x32
+#define R_N_LINE_INVERSION     0x34
+#define R_FRAME_FREQ_CONTROL   0x36
+#define R_RED_PALETTE          0x38
+#define R_GREEN_PALETTE        0x3a
+#define R_BLUE_PALETTE         0x3c
+#define R_ENTRY_MODE           0x40
+#define R_X_ADDR_AREA          0x42
+#define R_Y_ADDR_AREA          0x43
+#define R_RAM_SKIP_AREA        0x45
+#define R_DISPLAY_OFF          0x50
+#define R_DISPLAY_ON           0x51
+#define R_SPEC_DISPLAY_PATTERN 0x53
+#define R_PARTIAL_DISPLAY_MODE 0x55
+#define R_PARTIAL_START_LINE   0x56
+#define R_PARTIAL_END_LINE     0x57
+#define R_AREA_SCROLL_MODE     0x59
+#define R_SCROLL_START_LINE    0x5a
+#define R_DATA_FORMAT_SELECT   0x60
+
+/* TCC77x specific defines */
+#define LCD_BASE  0x50000000
+#define LCD_CMD   *(volatile unsigned char*)(LCD_BASE)
+#define LCD_DATA  *(volatile unsigned char*)(LCD_BASE+1)
+
+static void lcd_send_command(unsigned cmd)
+{
+    LCD_CMD = cmd;
+        
+    asm volatile (
+        "nop      \n\t"
+        "nop      \n\t"
+        "nop      \n\t"
+    );
+}
+
+static void lcd_send_data(unsigned data)
+{
+    LCD_DATA = (data & 0xff00) >> 8;
+    LCD_DATA = (data & 0x00ff);
+}
+
+/* End of TCC77x specific defines */
+
+/* LCD init */
+void lcd_init_device(void)
+{
+    uint32_t bus_width;
+
+    /* Telechips init the same as the original firmware */
+    bus_width = ((MCFG >> 11) & 0x3) ^ 3;
+
+    CSCFG1 = (bus_width << 28) |
+             (3 << 26) |                 /* MTYPE = 3 */
+             ((LCD_BASE >> 28) << 22) |  /* CSBASE = 0x5 */
+             (1 << 20) |                 /* Unknown */
+             (2 << 11) |                 /* Setup time = 2 cycles */
+             (2 << 3) |                  /* Pulse width = 2+1 cycles */
+             (2 << 0);                   /* Hold time = 2 cycle */
+			 
+    GPIOE &= ~0x8;
+    sleep(HZ/100);   /* 10ms */
+
+    GPIOE |= 0x08;
+    sleep(HZ/100);   /* 10ms */
+	
+    lcd_send_command(R_STANDBY_OFF);
+    sleep(HZ/20);    /* 50ms */
+
+    lcd_send_command(R_OSCILLATION_MODE);
+    lcd_send_command(0x01);
+    sleep(HZ/100);   /* 10ms */
+
+    lcd_send_command(R_DCDC_AMP_ONOFF);
+    lcd_send_command(0x01);
+    sleep(HZ/100);   /* 10ms */
+
+    lcd_send_command(R_DCDC_AMP_ONOFF);
+    lcd_send_command(0x09);
+    sleep(HZ/100);   /* 10ms */
+
+    lcd_send_command(R_DCDC_AMP_ONOFF);
+    lcd_send_command(0x0b);
+    sleep(HZ/100);   /* 10ms */
+
+    lcd_send_command(R_DCDC_AMP_ONOFF);
+    lcd_send_command(0x0f);
+    sleep(HZ/100);   /* 10ms */
+
+    lcd_send_command(R_DCDC_SET);
+    lcd_send_command(0x01);
+    sleep(HZ/100);     /* 10ms */
+    sleep(HZ/10);      /* 100ms */
+
+    lcd_send_command(R_TEMP_COMPENSATION);
+    lcd_send_command(0x01);
+    sleep(HZ/100);     /* 10ms */
+
+    lcd_send_command(R_DRIVER_OUTPUT_MODE);
+    lcd_send_command(0x03);
+
+    lcd_send_command(R_ENTRY_MODE);
+    lcd_send_command(0x81);
+
+    lcd_send_command(R_N_LINE_INVERSION);
+    lcd_send_command(0x04);
+    lcd_send_command(0xfa);
+    lcd_send_command(0x5f);
+
+    lcd_set_contrast(0x28);
+
+    lcd_send_command(R_SPEC_DISPLAY_PATTERN);
+    lcd_send_command(0x0);
+    sleep(HZ/100);     /* 10ms */
+
+    lcd_send_command(R_ADDRESSING_MODE);
+    lcd_send_command(0x0);
+    sleep(HZ/100);     /* 10ms */
+
+    lcd_send_command(R_PARTIAL_DISPLAY_MODE);
+    lcd_send_command(0x0);
+    sleep(HZ/100);     /* 10ms */
+
+    lcd_send_command(R_X_ADDR_AREA);
+    lcd_send_command(0);
+    lcd_send_command(0x80);
+
+    lcd_send_command(R_Y_ADDR_AREA);
+    lcd_send_command(0x0);
+    lcd_send_command(0x80);
+
+    lcd_send_command(R_DISPLAY_ON);
+
+    lcd_send_command(R_SPEC_DISPLAY_PATTERN);
+    lcd_send_command(0x0);
+
+    /* Rockbox init */
+    lcd_clear_display();
+    lcd_update();
+}
+
+/*** hardware configuration ***/
+int lcd_default_contrast(void)
+{
+    return 0x28;
+}
+
+void lcd_set_contrast(int val)
+{
+	//val &= 0xFF;
+    lcd_send_command(R_CONTRAST_CONTROL1);
+    lcd_send_command(val);
+}
+
+void lcd_set_invert_display(bool yesno)
+{
+    /* TODO: Implement lcd_set_invert_display() */
+    (void)yesno;
+}
+
+/* turn the display upside down (call lcd_update() afterwards) */
+void lcd_set_flip(bool yesno)
+{
+    lcd_send_command(R_DRIVER_OUTPUT_MODE);
+    lcd_send_command(yesno ? 0x02 : 0x07);
+}
+
+/*** update functions ***/
+
+/*** update functions ***/
+
+void lcd_yuv_set_options(unsigned options)
+{
+    lcd_yuv_options = options;
+}
+
+/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
+extern void lcd_write_yuv420_lines(unsigned char const * const src[3],
+                                   int width,
+                                   int stride);
+extern void lcd_write_yuv420_lines_odither(unsigned char const * const src[3],
+                                           int width,
+                                           int stride,
+                                           int x_screen, /* To align dither pattern */
+                                           int y_screen);
+/* Performance function to blit a YUV bitmap directly to the LCD */
+void lcd_blit_yuv(unsigned char * const src[3],
+                  int src_x, int src_y, int stride,
+                  int x, int y, int width, int height)
+{
+    unsigned char const * yuv_src[3];
+    off_t z;
+
+    /* Sorry, but width and height must be >= 2 or else */
+    width &= ~1;
+    height >>= 1;
+    
+    y += 0x1a;
+
+    z = stride*src_y;
+    yuv_src[0] = src[0] + z + src_x;
+    yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1);
+    yuv_src[2] = src[2] + (yuv_src[1] - src[1]);
+
+    lcd_send_command(R_ENTRY_MODE);
+    lcd_send_command(0x80);
+
+    lcd_send_command(R_X_ADDR_AREA);
+    lcd_send_command(x);
+    lcd_send_command(x + width - 1);
+
+    if (lcd_yuv_options & LCD_YUV_DITHER)
+    {
+        do
+        {
+            lcd_send_command(R_Y_ADDR_AREA);
+            lcd_send_command(y);
+            lcd_send_command(y + 1);
+
+            /* NOP needed because on some c200s, the previous lcd_send_command
+               is interpreted as a separate command instead of part of
+               R_Y_ADDR_AREA. */
+            lcd_send_command(R_NOP);
+
+            lcd_write_yuv420_lines_odither(yuv_src, width, stride, x, y);
+            yuv_src[0] += stride << 1; /* Skip down two luma lines */
+            yuv_src[1] += stride >> 1; /* Skip down one chroma line */
+            yuv_src[2] += stride >> 1;
+            y += 2;
+        }
+         while (--height > 0);
+    }
+    else
+    {
+        do
+        {
+            lcd_send_command(R_Y_ADDR_AREA);
+            lcd_send_command(y);
+            lcd_send_command(y + 1);
+
+            lcd_send_command(R_NOP);
+
+            lcd_write_yuv420_lines(yuv_src, width, stride);
+            yuv_src[0] += stride << 1; /* Skip down two luma lines */
+            yuv_src[1] += stride >> 1; /* Skip down one chroma line */
+            yuv_src[2] += stride >> 1;
+            y += 2;
+        }
+         while (--height > 0);
+    }
+}
+
+
+/* Update the display.
+   This must be called after all other LCD functions that change the display. */
+void lcd_update(void)
+{
+    lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
+}
+
+/* Update a fraction of the display. */
+void lcd_update_rect(int x, int y, int width, int height)
+{
+    const fb_data *addr;
+    
+    if (x + width >= LCD_WIDTH)
+        width = LCD_WIDTH - x;
+    if (y + height >= LCD_HEIGHT)
+        height = LCD_HEIGHT - y;
+        
+    if ((width <= 0) || (height <= 0))
+        return; /* Nothing left to do. */
+
+    addr = &lcd_framebuffer[y][x];
+
+    if (width <= 1) {                    
+        lcd_send_command(R_ENTRY_MODE);  /* The X end address must be larger */
+        lcd_send_command(0x80);          /* that the X start address, so we */
+        lcd_send_command(R_X_ADDR_AREA); /* switch to vertical mode for */
+        lcd_send_command(x);             /* single column updates and set */
+        lcd_send_command(x + 1);         /* the window width to 2 */
+    } else {
+        lcd_send_command(R_ENTRY_MODE);
+        lcd_send_command(0x82);
+        lcd_send_command(R_X_ADDR_AREA);
+        lcd_send_command(x);
+        lcd_send_command(x + width - 1);
+    }
+
+    lcd_send_command(R_Y_ADDR_AREA);
+    lcd_send_command(y);
+    lcd_send_command(y + height - 1);
+
+    /* NOP needed because on some c200s, the previous lcd_send_command is
+       interpreted as a separate command instead of part of R_Y_ADDR_AREA. */
+    lcd_send_command(R_NOP);
+
+    do {
+        int w = width;
+        do {
+            lcd_send_data(*addr++);
+        } while (--w > 0);
+        addr += LCD_WIDTH - width;
+    } while (--height > 0);
+}
diff --git a/firmware/target/arm/tcc77x/c100/power-c100.c b/firmware/target/arm/tcc77x/c100/power-c100.c
new file mode 100644
index 0000000000..eb3012fde6
--- /dev/null
+++ b/firmware/target/arm/tcc77x/c100/power-c100.c
@@ -0,0 +1,66 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id: power-logikdax.c 15339 2007-10-28 11:08:10Z dave $
+ *
+ * Copyright (C) 2007 Dave Chapman
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "config.h"
+#include "cpu.h"
+#include <stdbool.h>
+#include "kernel.h"
+#include "system.h"
+#include "power.h"
+
+#ifndef SIMULATOR
+
+void power_init(void)
+{
+}
+
+void ide_power_enable(bool on)
+{
+}
+
+bool ide_powered(void)
+{
+    return true;
+}
+
+void power_off(void)
+{
+}
+
+#else /* SIMULATOR */
+
+bool charger_inserted(void)
+{
+    return false;
+}
+
+void charger_enable(bool on)
+{
+    (void)on;
+}
+
+void power_off(void)
+{
+}
+
+void ide_power_enable(bool on)
+{
+   (void)on;
+}
+
+#endif /* SIMULATOR */
diff --git a/firmware/target/arm/tcc77x/system-tcc77x.c b/firmware/target/arm/tcc77x/system-tcc77x.c
index 2628d9f0ed..b338281c48 100644
--- a/firmware/target/arm/tcc77x/system-tcc77x.c
+++ b/firmware/target/arm/tcc77x/system-tcc77x.c
@@ -61,15 +61,19 @@ static void gpio_init(void)
     GPIOD_FUNC = 0;
     GPIOD_DIR = 0x3f0;
     GPIOD = 0xe0;
+	
     GPIOE_FUNC = 0;
     GPIOE_DIR = 0xe0;
     GPIOE = 0;
+	
     GPIOA_FUNC = 0;
     GPIOA_DIR = 0xffff1000;   /* 0 - 0xf000 */
     GPIOA = 0x1080;
+	
     GPIOB_FUNC = 0x16a3;
     GPIOB_DIR = 0x6ffff;
     GPIOB = 0;
+	
     GPIOC_FUNC = 1;
     GPIOC_DIR = 0x03ffffff;  /* mvn r2, 0xfc000000 */
     GPIOC = 0;
@@ -99,6 +103,28 @@ static void gpio_init(void)
 {
     /* TODO - Implement for M200 */
 }
+#elif defined(SANSA_C100)
+static void gpio_init(void)
+{
+    /* Do what the original firmware does */
+    GPIOA_FUNC = 0;
+    GPIOB_FUNC = 0x16A3;
+    GPIOC_FUNC = 1;
+    GPIOD_FUNC |= 2; 
+    GPIOE_FUNC = 0;
+	
+    GPIOA_DIR = 0xFFFF0E00;  
+    GPIOB_DIR = 0x6FFFF; 
+    GPIOC_DIR = 0x03FFFFFF; 
+    GPIOD_DIR = 0x3F7; 
+    GPIOE_DIR = 0x9B; 
+    
+    GPIOA = 0x80; 
+    GPIOB = 0;
+    GPIOC = 0;
+    GPIOD |= 0xC0; 
+    GPIOE = 0x9B; 
+}
 #endif
 
 /* Second function called in the original firmware's startup code - we just
@@ -158,7 +184,7 @@ http://infocenter.arm.com/help/topic/com.arm.doc.ddi0201d/DDI0201D_arm946es_r1p1
         "mcr     p15, 0, r0, c6, c0, 0  \n\t"
         "mcr     p15, 0, r0, c6, c0, 1  \n\t"
 
-#ifdef LOGIK_DAX
+#if defined(LOGIK_DAX) || defined(SANSA_C100)
         /* Address region 1 - addr 0x2fff0000, size=64KB, enabled*/
         "ldr     r0, =0x2fff001f        \n\t"
 #elif defined(IAUDIO_7)
@@ -208,7 +234,7 @@ http://infocenter.arm.com/help/topic/com.arm.doc.ddi0201d/DDI0201D_arm946es_r1p1
         "mcr     p15, 0, r0, c6, c7, 0  \n\t"
         "mcr     p15, 0, r0, c6, c7, 1  \n\t"
 
-
+		
         /* Register 5 - Access Permission Registers */
 
         "ldr     r0, =0xffff            \n\t"
@@ -218,9 +244,9 @@ http://infocenter.arm.com/help/topic/com.arm.doc.ddi0201d/DDI0201D_arm946es_r1p1
         "mov     r0, #0xa7              \n\t"
         "mcr     p15, 0, r0, c3, c0, 0  \n\t"  /* set write buffer control register */
 
-#ifdef LOGIK_DAX
+#if defined(LOGIK_DAX) || defined(SANSA_C100)
         "mov     r0, #0xa5              \n\t"
-#elif defined(IAUDIO_7) || defined(SANSA_M200)
+#elif defined(IAUDIO_7) || defined(SANSA_M200) 
         "mov     r0, #0xa7              \n\t"
 #elif
     #error NOT DEFINED FOR THIS TARGET!