Meizu M6 SP: update lcd driver, it is now possible to display a rockbox logo (with some limitations, see comments in lcd-m6sp.c)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23345 a1c6a512-1295-4272-9138-f99709370657

2 files changed, 93 insertions, 70 deletions

diff --git a/firmware/export/config-meizu-m6sp.h b/firmware/export/config-meizu-m6sp.h
index b5aad58667..973d6fdcca 100644
--- a/firmware/export/config-meizu-m6sp.h
+++ b/firmware/export/config-meizu-m6sp.h
@@ -59,13 +59,13 @@
 #define CONFIG_NAND NAND_SAMSUNG
 
 /* LCD dimensions */
-#define LCD_WIDTH  320
-#define LCD_HEIGHT 240
+#define LCD_WIDTH  240
+#define LCD_HEIGHT 320
 #define LCD_DEPTH  16   /* pseudo 262.144 colors */
 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
 
 /* Define this if your LCD can be enabled/disabled */
-//#define HAVE_LCD_ENABLE
+#define HAVE_LCD_ENABLE
 
 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
    should be defined as well. */
diff --git a/firmware/target/arm/s5l8700/meizu-m6sp/lcd-m6sp.c b/firmware/target/arm/s5l8700/meizu-m6sp/lcd-m6sp.c
index b6330406f2..9a24480bfa 100644
--- a/firmware/target/arm/s5l8700/meizu-m6sp/lcd-m6sp.c
+++ b/firmware/target/arm/s5l8700/meizu-m6sp/lcd-m6sp.c
@@ -31,26 +31,32 @@
     (yet unknown) type, the exact type is detected at run-time.
 
     Open issues:
-    * untested on actual hardware
-    * use 16-bit pixel format, currently pixels are converted to a 32-bit pixel
-      format in lcd_update_rect, that is not natively supported yet in Rockbox.
+    * LCD is currently in portrait mode instead of landscape mode
+    * This LCD driver accesses the Rockbox framebuffer directly, so any changes
+      to the framebuffer as shown directly even before lcd_update is called.
+    * Sometimes part of the top of the screen appears at the bottom
+    * The Meizu seems to hang after LCD initialisation
+    * The driver for the S6D0139 LCD has not been tested yet
       
  */
 
 /* LCD SPI connections */

-#define LCD_SPI_SSn     (1<<1)      /* on PDAT7 */

-#define LCD_SPI_MISO    (1<<2)      /* on PDAT3 */

-#define LCD_SPI_MOSI    (1<<6)      /* on PDAT3 */

-#define LCD_SPI_SCLK    (1<<7)      /* on PDAT3 */

-

-#define LCD_TYPE1_ID    0x139       /* id for LCD type S6D0139 */

-

+#define LCD_SPI_SSn         (1<<1)  /* on PDAT7 */

+#define LCD_SPI_MISO        (1<<2)  /* on PDAT3 */

+#define LCD_SPI_MOSI        (1<<6)  /* on PDAT3 */

+#define LCD_SPI_SCLK        (1<<7)  /* on PDAT3 */
+
+/* LCD SPI communication definitions */
+#define LCD_SPI_DEVICE_ID   (0x1D<<2)
+#define LCD_SPI_INDEX_WRITE (LCD_SPI_DEVICE_ID|0)
+#define LCD_SPI_STATUS_READ (LCD_SPI_DEVICE_ID|1)
+#define LCD_SPI_DATA_WRITE  (LCD_SPI_DEVICE_ID|2)
+#define LCD_SPI_DATA_READ   (LCD_SPI_DEVICE_ID|3)

+

+#define LCD_TYPE1_ID        0x139   /* id for LCD type S6D0139 */

+
 static int lcd_type = 0;
 
-/* local frame buffer, keeps pixels in 32-bit words in format 0x00RRGGBB */

-static uint32_t lcd_local_fb[LCD_HEIGHT][LCD_WIDTH];

-

-

 /* simple and crude delay */

 static void lcd_delay(int count)

 {

@@ -111,7 +117,7 @@ static void lcd_spi_init(void)
     

     /* configure MISO (P3.2) input, MOSI (P3.6) output, SCLK (P3.7) output */

     PCON3 = (PCON3 & ~0xFF000F00) | 0x11000000;

-    

+    
     /* set all outputs high */

     PDAT7 |= LCD_SPI_SSn;

     PDAT3 |= (LCD_SPI_MOSI | LCD_SPI_SCLK);

@@ -121,17 +127,17 @@ static void lcd_spi_init(void)
 static unsigned int lcd_read_reg(unsigned reg)

 {

     unsigned int data;

-    

-    lcd_spi_transfer(24, (0x74 << 16) | reg);   //0111.0100

-    data = lcd_spi_transfer(24, (0x77 << 16));  //0111.0111

+    
+    lcd_spi_transfer(24, (LCD_SPI_INDEX_WRITE << 16) | reg);
+    data = lcd_spi_transfer(24, (LCD_SPI_DATA_READ << 16));
     return data & 0xFFFF;

 }

 

 /* write LCD register over SPI */

 static void lcd_write_reg(unsigned char reg, unsigned int data)

-{

-    lcd_spi_transfer(24, (0x74 << 16) | reg);   //0111.0100

-    lcd_spi_transfer(24, (0x76 << 16) | data);  //0111.0110

+{
+    lcd_spi_transfer(24, (LCD_SPI_INDEX_WRITE << 16) | reg);
+    lcd_spi_transfer(24, (LCD_SPI_DATA_WRITE << 16) | data);
 }

 

 /* enable/disable clock signals towards the lcd */

@@ -226,10 +232,10 @@ static void lcd_init2(void)
     lcd_write_reg(0x0C, 0x0000);

     lcd_write_reg(0x0D, 0x0007);

     lcd_write_reg(0x15, 0x0003);

-

     lcd_write_reg(0x16, 0x0014);

-    lcd_write_reg(0x17, 0x0000);

-    lcd_write_reg(0x30, 0x0503);

+    lcd_write_reg(0x17, 0x0000);
+    

+    lcd_write_reg(0x30, 0x0503);    /* gamma? */

     lcd_write_reg(0x31, 0x0303);

     lcd_write_reg(0x32, 0x0305);

     lcd_write_reg(0x33, 0x0202);

@@ -295,6 +301,8 @@ static void lcd_enable2(bool on)
         lcd_write_reg(0x13, 0x0022);

         lcd_write_reg(0x14, 0x0000);

         lcd_write_reg(0x10, 0x7404);

+        lcd_write_reg(0x11, 0x0738);

+        lcd_write_reg(0x10, 0x7404);

         lcd_delay(833350);

         

         lcd_write_reg(0x07, 0x0009);

@@ -311,7 +319,7 @@ static void lcd_enable2(bool on)
         lcd_write_reg(0x07, 0x010B);

     }

     else {

-        lcd_write_reg(0x0B, 0x0000);

+        lcd_write_reg(0x0B, 0x0109);

         lcd_write_reg(0x07, 0x0009);

         lcd_delay(666680);

 

@@ -326,7 +334,7 @@ static void lcd_enable2(bool on)
 

 /* turn both the lcd controller and the lcd itself on or off */

 void lcd_enable(bool on)

-{

+{
     if (on) {

         /* enable controller clock */

         PWRCON &= ~(1 << 18);

@@ -354,16 +362,28 @@ void lcd_enable(bool on)
 /* initialise the lcd controller inside the s5l8700 */

 static void lcd_controller_init(void)

 {

-    PWRCON &= ~(1 << 18);

-

-    LCDCON1 = 0x991DC;

-    LCDCON2 = 0xE8;

-    LCDTCON1 = (lcd_type == 1) ? 0x70103 : 0x30303;

-    LCDTCON2 = (lcd_type == 1) ? 0x70103 : 0x30703;

-    LCDTCON3 = 0x9F8EF;

+    PWRCON &= ~(1 << 18);
+    
+    LCDCON1 =   (0 << 28) |     /* BURSTLEN */
+                (0 << 19) |     /* DIVEN */
+                (12 << 13) |    /* CLKVAL */
+                (1 << 12) |     /* CLKDIR, 1=divided clock */
+                (0 << 11) |     /* CLKSEL, 0=HCLK, 1=PLL */
+                (5 << 6) |      /* BPPMODEF, 5=rgb565, 7=raw24 */
+                (5 << 2) |      /* BPPMODEB, 5=rgb565, 7=raw24 */
+                (0 << 0);       /* ENVID */
+    LCDCON2 =   (2 << 9) |      /* PALFRM, 2=rgb565 palette */
+                (1 << 7) |      /* IVCLK */
+                (1 << 6) |      /* IHSYNC */
+                (1 << 5) |      /* IVSYNC */
+                (1 << 3);       /* IVDEN */
+    LCDTCON1 = (lcd_type == 1) ? 0x070103 : 0x030303;
+    LCDTCON2 = (lcd_type == 1) ? 0x070103 : 0x030703;
+    LCDTCON3 = ((LCD_HEIGHT - 1) << 11) | (LCD_WIDTH - 1);

     LCDOSD1 = 0;

     LCDOSD2 = 0;

-    LCDOSD3 = 0;

+    LCDOSD3 = 0;
+
     LCDB1SADDR1 = 0;

     LCDB2SADDR1 = 0;

     LCDF1SADDR1 = 0;

@@ -376,6 +396,7 @@ static void lcd_controller_init(void)
     LCDB2SADDR3 = 0;

     LCDF1SADDR3 = 0;

     LCDF2SADDR3 = 0;

+
     LCDKEYCON = 0;

     LCDCOLVAL = 0;

     LCDBGCON = 0;

@@ -387,21 +408,16 @@ static void lcd_controller_init(void)
 

 void lcd_init_device(void)

 {

-    unsigned int lcd_id;

-    

+    unsigned int lcd_id;
+    uint32_t fb, fb_end, window;

+
     /* configure LCD SPI pins */

     lcd_spi_init();

     

     /* identify display through SPI */

     lcd_id = lcd_read_reg(0);

-    lcd_type = (lcd_id == LCD_TYPE1_ID) ? 1 : 2;

-    

-    /* configure LCD pins */

-    PCON_ASRAM = 1;

+    lcd_type = (lcd_id == LCD_TYPE1_ID) ? 1 : 2;
     

-    /* init LCD controller */

-    lcd_controller_init();

-

     /* display specific init sequence */

     if (lcd_type == 1) {

         lcd_init1();

@@ -409,35 +425,42 @@ void lcd_init_device(void)
     else {

         lcd_init2();

     }

+
+    /* init LCD controller */

+    lcd_controller_init();

+
+    /* set framebuffer addresses */

+    fb = (uint32_t) &lcd_framebuffer[0][0];
+    fb_end = (uint32_t) &lcd_framebuffer[LCD_HEIGHT][0];
+    window = 2 * LCD_WIDTH;
+
+    LCDB1SADDR1 = fb;

+    LCDB2SADDR1 = fb;

+    LCDF1SADDR1 = fb;

+    LCDF2SADDR1 = fb;

+
+    LCDB1SADDR2 = fb_end;

+    LCDB2SADDR2 = fb_end;

+    LCDF1SADDR2 = fb_end;
    LCDF2SADDR2 = fb_end;

+
+    LCDB1SADDR3 = window;

+    LCDB2SADDR3 = window;

+    LCDF1SADDR3 = window;

+    LCDF2SADDR3 = window;

     

-    /* set active background buffer */

-    LCDCON1 &= ~(1 << 21);  /* clear BDBCON */

-    

-    /* set background buffer address */

-    LCDB1SADDR1 = (uint32_t) &lcd_local_fb[0][0];

-    LCDB1SADDR2 = (uint32_t) &lcd_local_fb[LCD_HEIGHT][0];

-    

-    lcd_enable(true);

+    lcd_enable(true);
+
+    /* configure LCD pins */

+    PCON_ASRAM = 1;

 }

 
 void lcd_update_rect(int x, int y, int width, int height)
 {
-    fb_data *src;
-    uint32_t *dst;
-    fb_data pixel;
-    int h, w;
-    
-    for (h = 0; h < height; h++) {
-        src = &lcd_framebuffer[y][x];
-        dst = &lcd_local_fb[y][x];
-        for (w = 0; w < width; w++) {
-            pixel = src[w];
-            dst[w] = (RGB_UNPACK_RED(pixel) << 16) |
-                     (RGB_UNPACK_GREEN(pixel) << 8) |
-                     (RGB_UNPACK_BLUE(pixel) << 0);
-        }
-        y++;
-    }
+    /* not implemented yet, LCD controller accesses framebuffer directly */
+    (void) x;
+    (void) y;
+    (void) width;
+    (void) height;
 }
 
 void lcd_update(void)