Remove Samsung YP-Z5 port

It has only a couple GB of onboard flash storage with no storage
driver in Rockbox. It hasn't seen any meaningful development since
its initial commit, it's not on the build farm, and the bootloader
build is broken by other refactoring.

Change-Id: Idd9e3c46fac9b96f416ce444182f97a50770e747

13 files changed, 0 insertions, 1071 deletions

diff --git a/firmware/target/arm/imx233/samsung-ypz5/audio-target.h b/firmware/target/arm/imx233/samsung-ypz5/audio-target.h
deleted file mode 100644
index c0bee26e45..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/audio-target.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2013 by Lorenzo Miori
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#ifndef __audio_target__
-#define __audio_target__
-
-/* MUTE_ON toggles a transistor that in turns toggles a mosfet... */
-#define IMX233_AUDIO_HP_GATE_BANK 1
-#define IMX233_AUDIO_HP_GATE_PIN 22
-#define IMX233_AUDIO_HP_GATE_INVERTED
-
-#define IMX233_AUDIO_COUPLING_MODE ACM_CAP
-
-#endif /* __audio_target__ */
diff --git a/firmware/target/arm/imx233/samsung-ypz5/backlight-target.h b/firmware/target/arm/imx233/samsung-ypz5/backlight-target.h
deleted file mode 100644
index e26f83811d..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/backlight-target.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- *
- * Copyright (C) 2013 by Lorenzo Miori
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#ifndef BACKLIGHT_TARGET_H
-#define BACKLIGHT_TARGET_H
-
-bool backlight_hw_init(void);
-void backlight_hw_on(void);
-void backlight_hw_off(void);
-void backlight_hw_brightness(int brightness);
-
-#endif /* BACKLIGHT_TARGET_H */
diff --git a/firmware/target/arm/imx233/samsung-ypz5/backlight-ypz5.c b/firmware/target/arm/imx233/samsung-ypz5/backlight-ypz5.c
deleted file mode 100644
index b02c3a1d16..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/backlight-ypz5.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- *
- * Copyright (C) 2013 by Lorenzo Miori
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-
-#include "config.h"
-#include "system.h"
-#include "lcd.h"
-#include "backlight.h"
-#include "backlight-target.h"
-#include "pinctrl-imx233.h"
-
-/**
- * AAT3151 Backlight Controller
- */
-
-/* Timings */
-#define TIME_OFF                500
-#define TIME_LOW                50
-#define TIME_HI                 50
-#define TIME_LAT                500
-
-/* Number of raising edges to select the particular register */
-#define D1_D4_CURRENT_E           17
-#define D1_D3_CURRENT_E           18
-#define D4_CURRENT_E              19
-#define MAX_CURRENT_E             20
-#define LOW_CURRENT_E             21
-
-/* The actual register address / number */
-#define D1_D4_CURRENT           1
-#define D1_D3_CURRENT           2
-#define D4_CURRENT              3
-#define MAX_CURRENT             4
-#define LOW_CURRENT             5
-
-/* Valid values for LOW_CURRENT register */
-#define MAX_CURRENT_20                  1
-#define MAX_CURRENT_30                  2
-#define MAX_CURRENT_15                  3
-#define MAX_CURRENT_LOW_CURRENT         4
-
-static int current_level = -1;
-
-static void create_raising_edges(int num)
-{
-    while (num--)
-    {
-        /* Setting a register takes a sufficient small amount of time,
-         * in the order of 50 ns. Thus the necessary 2 delays TIME_LOW/TIME_HI
-         * are not strictly necessary */
-        imx233_pinctrl_set_gpio(3, 13, false);
-        imx233_pinctrl_set_gpio(3, 13, true);
-    }
-}
-
-static void aat3151_write(int addr, int data)
-{
-    create_raising_edges(16 + addr);
-    udelay(TIME_LAT);
-    create_raising_edges(data);
-    udelay(TIME_LAT);
-}
-
-void backlight_hw_brightness(int level)
-{
-    /* Don't try to reset backlight if not necessary
-     *  Moreover this helps to avoid flickering when
-     *  being in some screens like USB mode and
-     *  pressing some keys / touchpad...
-     */
-    if (current_level == level) return;
-
-    /* Check for limits and adjust in case */
-    level = MIN(MAX_BRIGHTNESS_SETTING, MAX(0, level));
-
-    if (level == 0)
-    {
-        /* Set pin low for a sufficient time, puts the device into low-power consumption state
-         * In other words backlight goes off
-         */
-        imx233_pinctrl_set_gpio(3, 13, false);
-        udelay(TIME_OFF);
-    }
-    else
-    {
-        if (level > 3) {
-            /* This enables 16 levels of backlight */
-            aat3151_write(MAX_CURRENT, MAX_CURRENT_15);
-            /* Set the value according Table 1 in datasheet
-             * For MAX_CURRENT_15, the scale is from 0 mA to 15 mA in 16 steps
-             */
-            aat3151_write(D1_D3_CURRENT, 19 - level);
-        }
-        else {
-            /* This enables other 4 levels of backlight */
-            aat3151_write(MAX_CURRENT, MAX_CURRENT_LOW_CURRENT);
-            /* Set the value according Table 1 in datasheet
-             * For LOW_CURRENT, there is no "real" scale. We have scattered values.
-             * We are interested in the last 3 -> 0.5 mA; 1 mA; 2 mA
-             */
-            aat3151_write(LOW_CURRENT, 13 + level);
-        }
-    }
-    current_level = level;
-}
-
-bool backlight_hw_init(void)
-{
-    imx233_pinctrl_acquire(3, 13, "backlight");
-    imx233_pinctrl_set_function(3, 13, PINCTRL_FUNCTION_GPIO);
-    imx233_pinctrl_set_drive(3, 13, PINCTRL_DRIVE_4mA);
-    imx233_pinctrl_enable_gpio(3, 13, true);
-    imx233_pinctrl_set_gpio(3, 13, false);
-    return true;
-}
-
-void backlight_hw_on(void)
-{
-#ifdef HAVE_LCD_ENABLE
-    lcd_enable(true); /* power on lcd + visible display */
-#endif
-    /* restore the previous backlight level */
-    backlight_hw_brightness(backlight_brightness);
-}
-
-void backlight_hw_off(void)
-{
-    /* there is no real on/off but we can set to 0 brightness */
-    backlight_hw_brightness(0);
-#ifdef HAVE_LCD_ENABLE
-    lcd_enable(false); /* power off visible display */
-#endif
-}
diff --git a/firmware/target/arm/imx233/samsung-ypz5/button-target.h b/firmware/target/arm/imx233/samsung-ypz5/button-target.h
deleted file mode 100644
index 2f94f5fb31..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/button-target.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2013 by Lorenzo Miori
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#ifndef _BUTTON_TARGET_H_
-#define _BUTTON_TARGET_H_
-
-#include <stdbool.h>
-
-#define HAS_BUTTON_HOLD
-#define IMX233_BUTTON_LRADC_CHANNEL     0
-#define IMX233_BUTTON_LRADC_HOLD_DET    BLH_GPIO
-#define BLH_GPIO_BANK   0
-#define BLH_GPIO_PIN    13
-
-#define IMX233_BUTTON_LRADC_CHANNEL 0
-
-/* Main unit's buttons */
-#define BUTTON_POWER                0x00000001
-#define BUTTON_VOL_UP               0x00000002
-#define BUTTON_VOL_DOWN             0x00000004
-/* Directional buttons by touchpad */
-#define BUTTON_LEFT                 0x00000008
-#define BUTTON_UP                   0x00000010
-#define BUTTON_RIGHT                0x00000020
-#define BUTTON_DOWN                 0x00000040
-#define BUTTON_SELECT               0x00000080
-#define BUTTON_BACK                 0x00000100
-#define BUTTON_REW                  0x00000200
-#define BUTTON_FF                   0x00000400
-
-
-#define BUTTON_MAIN (BUTTON_VOL_UP | BUTTON_VOL_DOWN | BUTTON_POWER | BUTTON_LEFT | \
-                     BUTTON_UP | BUTTON_RIGHT | BUTTON_DOWN | BUTTON_SELECT | \
-                     BUTTON_BACK | BUTTON_REW | BUTTON_FF)
-
-/* Software power-off */
-#define POWEROFF_BUTTON BUTTON_POWER
-#define POWEROFF_COUNT 10
-
-bool button_debug_screen(void);
-
-#endif /* _BUTTON_TARGET_H_ */
diff --git a/firmware/target/arm/imx233/samsung-ypz5/button-ypz5.c b/firmware/target/arm/imx233/samsung-ypz5/button-ypz5.c
deleted file mode 100644
index 91fe059c31..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/button-ypz5.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- *
- * Copyright (C) 2013 by Lorenzo Miori
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-
-#include "system.h"
-#include "lcd.h"
-#include "string.h"
-#include "kernel.h"
-#include "pinctrl-imx233.h"
-#include "power-imx233.h"
-#include "button-lradc-imx233.h"
-#include "button-target.h"
-#include "button-imx233.h"
-
-#ifndef BOOTLOADER
-#include "touchscreen.h"
-#include "touchscreen-imx233.h"
-#include "button.h"
-#include "font.h"
-#include "action.h"
-#endif
-
-#define CHAN    0   /* ADC channel for the buttons */
-#define I_VDDIO 0   /* Mock button to define the relative voltage to compute voltage from ADC steps */
-
-struct imx233_button_map_t imx233_button_map[] =
-{
-    [I_VDDIO] = IMX233_BUTTON_(VDDIO, VDDIO(3760), "vddio"), /* we need VDDIO for relative */
-    IMX233_BUTTON_(HOLD, GPIO(0, 13), "hold"),
-    IMX233_BUTTON(POWER, PSWITCH(1), "power"),
-    IMX233_BUTTON(SELECT, PSWITCH(3), "select"),
-    IMX233_BUTTON(VOL_UP, LRADC_REL(CHAN, 485, I_VDDIO), "vol up"),
-    IMX233_BUTTON(VOL_DOWN, LRADC_REL(CHAN, 975, I_VDDIO), "vol down"),
-    IMX233_BUTTON(BACK, LRADC_REL(CHAN, 1521, I_VDDIO), "back"),
-    IMX233_BUTTON(FF, LRADC_REL(CHAN, 2000, I_VDDIO), "ff"),
-    IMX233_BUTTON(REW, LRADC_REL(CHAN, 2480, I_VDDIO), "rew"),
-    IMX233_BUTTON_(END, END(), "")
-};
-
-#ifndef BOOTLOADER
-static int last_x = 0;
-static int last_y = 0;
-static bool touching = false;
-#endif /* BOOTLOADER */
-
-#ifndef BOOTLOADER
-
-/* Touchpad extra pin initialization
- * Strange facts:
- * 1. In the fully working sample I have, it seems that pins
- * must be all set to low
- * 2. In the other sample without LCD, it seems (by measurement) that
- * not all the pins are set to low! Actually, I still need to see if
- * touchpad works in this other sample.
-*/
-void touchpad_pin_setup(void)
-{
-    /* TX+ */
-    imx233_pinctrl_acquire(0, 25, "touchpad X+ power low");
-    imx233_pinctrl_set_function(0, 25, PINCTRL_FUNCTION_GPIO);
-    imx233_pinctrl_set_drive(0, 25, PINCTRL_DRIVE_4mA);
-    imx233_pinctrl_enable_gpio(0, 25, true);
-
-    /* TY+ */
-    imx233_pinctrl_acquire(0, 26, "touchpad Y+ power high");
-    imx233_pinctrl_set_function(0, 26, PINCTRL_FUNCTION_GPIO);
-    imx233_pinctrl_set_drive(0, 26, PINCTRL_DRIVE_4mA);
-    imx233_pinctrl_enable_gpio(0, 26, true);
-
-    /* TY- */
-    imx233_pinctrl_acquire(1, 21, "touchpad Y- power low");
-    imx233_pinctrl_set_function(1, 21, PINCTRL_FUNCTION_GPIO);
-    imx233_pinctrl_set_drive(1, 21, PINCTRL_DRIVE_4mA);
-    imx233_pinctrl_enable_gpio(1, 21, true);
-
-    /* TX- */
-    imx233_pinctrl_acquire(3, 15, "touchpad X- power high");
-    imx233_pinctrl_set_function(3, 15, PINCTRL_FUNCTION_GPIO);
-    imx233_pinctrl_set_drive(3, 15, PINCTRL_DRIVE_4mA);
-    imx233_pinctrl_enable_gpio(3, 15, true);
-
-}
-#endif /* BOOTLOADER */
-
-void button_init_device(void)
-{
-    /* init button subsystem */
-    imx233_button_init();
-#ifndef BOOTLOADER
-    touchpad_pin_setup();
-    /* Now that is powered up, proceed with touchpad initialization */
-    imx233_touchscreen_init();
-    imx233_touchscreen_enable(true);
-#endif /* BOOTLOADER */
-}
-
-/* X, Y, RadiusX, RadiusY */
-#define TOUCH_UP        2400, 1050, 650, 250
-#define TOUCH_DOWN      2057, 3320, 500, 350
-#define TOUCH_LEFT      3581, 2297, 300, 350
-#define TOUCH_RIGHT     1000, 2100, 400, 700
-#define TOUCH_CENTER    2682, 2167, 335, 276
-
-bool coord_in_radius(int x, int y, int cx, int cy, int rx, int ry)
-{
-    return ((x >= cx - rx && x <= cx + rx) && (y >= cy - ry && y <= cy + ry));
-}
-
-int button_read_device(void)
-{
-    int res = 0;
-
-#ifndef BOOTLOADER
-    /* handle the touchpad events */
-    touching = imx233_touchscreen_get_touch(&last_x, &last_y);
-    if(touching)
-    {
-        if (coord_in_radius(last_x, last_y, TOUCH_LEFT))
-        {
-            res |= BUTTON_LEFT;
-        }
-        else if (coord_in_radius(last_x, last_y, TOUCH_RIGHT))
-        {
-            res |= BUTTON_RIGHT;
-        }
-        else if (coord_in_radius(last_x, last_y, TOUCH_DOWN))
-        {
-            res |= BUTTON_DOWN;
-        }
-        else if (coord_in_radius(last_x, last_y, TOUCH_UP))
-        {
-            res |= BUTTON_UP;
-        }
-    }
-#endif /* BOOTLOADER */
-    /* handle the generic events */
-    return imx233_button_read(res);
-}
-
-#ifndef BOOTLOADER
-
-#define MAX_ENTRIES         100
-#define VIEWPORT_HEIGHT     100
-#define VIEWPORT_WIDTH      100
-#define MAX_X               3700
-#define MAX_Y               3700
-#define ADAPT_TO_VIEWPORT(cx, cy, rx, ry)       ((float)(cx) / MAX_X) * VIEWPORT_WIDTH, \
-                                                ((float)(cy) / MAX_Y) * VIEWPORT_HEIGHT, \
-                                                ((float)(rx) / MAX_X) * VIEWPORT_WIDTH, \
-                                                ((float)(ry) / MAX_Y) * VIEWPORT_HEIGHT
-static void draw_calibration_rect(int cx, int cy, int rx, int ry)
-{
-    if (coord_in_radius(last_x, last_y, cx, cy, rx, ry))
-        lcd_set_drawinfo(DRMODE_SOLID, LCD_RGBPACK(0xff, 0xff, 0xff), LCD_BLACK);
-    else
-        lcd_set_drawinfo(DRMODE_SOLID, LCD_RGBPACK(0xff, 0, 0), LCD_BLACK);
-    lcd_drawrect(ADAPT_TO_VIEWPORT(cx - rx, cy - ry, 2 * rx, 2 * ry));
-}
-
-bool button_debug_screen(void)
-{
-    int last = 0;
-    struct point_t
-    {
-        int x;
-        int y;
-    };
-    struct point_t last_entries[MAX_ENTRIES];
-    struct viewport report_vp;
-
-    memset(&report_vp, 0, sizeof(report_vp));
-    report_vp.x = (LCD_WIDTH - VIEWPORT_WIDTH) / 2;
-    report_vp.y = (LCD_HEIGHT - VIEWPORT_HEIGHT) / 2;
-    report_vp.width = VIEWPORT_WIDTH;
-    report_vp.height = VIEWPORT_HEIGHT;
-
-    lcd_setfont(FONT_SYSFIXED);
-    lcd_clear_display();
-
-    while(1)
-    {
-        int button = get_action(CONTEXT_STD, HZ / 10);
-        switch(button)
-        {
-            case ACTION_STD_OK:
-            case ACTION_STD_MENU:
-                lcd_set_viewport(NULL);
-                lcd_setfont(FONT_UI);
-                lcd_clear_display();
-                return true;
-            case ACTION_STD_CANCEL:
-                lcd_set_viewport(NULL);
-                lcd_setfont(FONT_UI);
-                lcd_clear_display();
-                return false;
-        }
-
-        lcd_set_viewport(NULL);
-        lcd_putsf(0, 1, "(%d,%d) %s", last_x, last_y, touching ? "touching!" : "");
-        lcd_putsf(0, 0, "Type %s", imx233_pinctrl_get_gpio(0, 31) ? "CAP" : "REG");
-        lcd_set_viewport(&report_vp);
-        lcd_set_drawinfo(DRMODE_SOLID, LCD_RGBPACK(0, 0, 0xff), LCD_BLACK);
-        lcd_drawrect(0, 0, 100, 100);
-        float percent_x = ((float)(last_x) / MAX_X);
-        float percent_y = ((float)(last_y) / MAX_Y);
-        if (touching)
-        {
-            lcd_set_viewport(NULL);
-            if (last < MAX_ENTRIES)
-            {
-                last_entries[last].x = last_x;
-                last_entries[last].y = last_y;
-                last++;
-                lcd_putsf(0, 17, "Recording: %d captures left", MAX_ENTRIES - last);
-            }
-            else
-            {
-                int min_x = 9999;
-                int min_y = 9999;
-                int max_x = -1;
-                int max_y = -1;
-                int median_x = 0;
-                int median_y = 0;
-                for (int i = 0; i < MAX_ENTRIES; i++)
-                {
-                    min_x = MIN(min_x, last_entries[i].x);
-                    min_y = MIN(min_y, last_entries[i].y);
-                    max_x = MAX(max_x, last_entries[i].x);
-                    max_y = MAX(max_y, last_entries[i].y);
-                    median_x += last_entries[i].x;
-                    median_y += last_entries[i].y;
-                }
-                median_x /= MAX_ENTRIES;
-                median_y /= MAX_ENTRIES;
-                lcd_putsf(0, 17, "center(%d,%d)", median_x, median_y);
-                lcd_putsf(0, 18, "radius(%d,%d)", median_x / 2, median_y / 2);
-            }
-            lcd_set_viewport(&report_vp);
-            lcd_set_drawinfo(DRMODE_SOLID, LCD_RGBPACK(0xff, 0x8c, 0), LCD_BLACK);
-            lcd_fillrect(VIEWPORT_WIDTH * percent_x, VIEWPORT_HEIGHT * percent_y, 2, 2);
-        }
-
-        /* Draw current calibration settings */
-        lcd_set_viewport(&report_vp);
-        draw_calibration_rect(TOUCH_UP);
-        draw_calibration_rect(TOUCH_DOWN);
-        draw_calibration_rect(TOUCH_CENTER);
-        draw_calibration_rect(TOUCH_LEFT);
-        draw_calibration_rect(TOUCH_RIGHT);
-
-        lcd_update();
-        yield();
-    }
-
-    return true;
-}
-#endif
diff --git a/firmware/target/arm/imx233/samsung-ypz5/debug-ypz5.c b/firmware/target/arm/imx233/samsung-ypz5/debug-ypz5.c
deleted file mode 100644
index c125eac973..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/debug-ypz5.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2013 by Amaury Pouly
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-
-#include "system.h"
-#include "button-target.h"
-#include "lcd-target.h"
-
-bool dbg_hw_target_info(void)
-{
-    return button_debug_screen() && lcd_debug_screen();
-}
diff --git a/firmware/target/arm/imx233/samsung-ypz5/fmradio-target.h b/firmware/target/arm/imx233/samsung-ypz5/fmradio-target.h
deleted file mode 100644
index 66bceb4071..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/fmradio-target.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2013 by Amaury Pouly
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#ifndef _FMRADIO_TARGET_H_
-#define _FMRADIO_TARGET_H_
-
-#define IMX233_FMRADIO_I2C  FMI_HW
-
-#define IMX233_FMRADIO_POWER    FMP_GPIO
-#define FMP_GPIO_BANK   0
-#define FMP_GPIO_PIN    10
-#define FMP_GPIO_DELAY  (HZ / 5)
-
-#endif /* _FMRADIO_TARGET_H_ */
diff --git a/firmware/target/arm/imx233/samsung-ypz5/ftl-target.h b/firmware/target/arm/imx233/samsung-ypz5/ftl-target.h
deleted file mode 100644
index cb943e34f2..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/ftl-target.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2009 by Michael Sparmann
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-
-#ifndef __FTL_TARGET_H__
-#define __FTL_TARGET_H__
-
-#include "config.h"
-#include "inttypes.h"
-
-#ifdef BOOTLOADER
-/* Bootloaders don't need write access */
-#define FTL_READONLY
-#endif
-
-uint32_t ftl_init(void);
-uint32_t ftl_read(uint32_t sector, uint32_t count, void* buffer);
-uint32_t ftl_write(uint32_t sector, uint32_t count, const void* buffer);
-uint32_t ftl_sync(void);
-
-
-#endif
diff --git a/firmware/target/arm/imx233/samsung-ypz5/lcd-target.h b/firmware/target/arm/imx233/samsung-ypz5/lcd-target.h
deleted file mode 100644
index 9993b7d731..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/lcd-target.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- *
- * Copyright (c) 2013 by Amaury Pouly
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#ifndef LCD_TARGET_H
-#define LCD_TARGET_H
-
-bool lcd_debug_screen(void);
-
-#endif /* LCD_TARGET_H */
diff --git a/firmware/target/arm/imx233/samsung-ypz5/lcd-ypz5.c b/firmware/target/arm/imx233/samsung-ypz5/lcd-ypz5.c
deleted file mode 100644
index 99fe0b2aef..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/lcd-ypz5.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- *
- * Copyright (c) 2013 by Lorenzo Miori
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#include <sys/types.h> /* off_t */
-#include <string.h>
-#include "cpu.h"
-#include "system.h"
-#include "backlight-target.h"
-#include "lcd.h"
-#include "lcdif-imx233.h"
-#include "clkctrl-imx233.h"
-#include "pinctrl-imx233.h"
-#include "dcp-imx233.h"
-#include "logf.h"
-#ifndef BOOTLOADER
-#include "button.h"
-#include "font.h"
-#include "action.h"
-#endif
-#include "dma-imx233.h"
-#include "kernel.h"
-
-#include "regs/lcdif.h"
-
-/**
- * NOTE
- * We don't know exact LCD models nor we have datasheets for them
- * Register function are partly guessed from the values, others are guessed from other LCD
- * drivers and others have been confirmed studying their values
- */
-
-static enum lcd_type_t
-{
-    LCD_TYPE_ZERO = 0,
-    LCD_TYPE_ONE = 1
-} lcd_type = LCD_TYPE_ZERO;
-
-static void lcd_write_reg(uint16_t reg, uint16_t data)
-{
-    imx233_lcdif_pio_send(false, 1, &reg);
-    if(reg != 0x22)
-        imx233_lcdif_pio_send(true, 1, &data);
-}
-
-/*
- * The two LCD types require different initialization sequences
- */
-void lcd_init_seq(void)
-{
-    switch (lcd_type)
-    {
-        case LCD_TYPE_ZERO:
-        {
-            lcd_write_reg(0x11, 0x1f1e);
-            lcd_write_reg(0x38, 0xf0f);
-            lcd_write_reg(0x12, 0x1101);
-            lcd_write_reg(0x13, 0x808);
-            lcd_write_reg(0x14, 0x3119);
-            lcd_write_reg(0x10, 0x1a10);
-            udelay(0xc350);
-            lcd_write_reg(0x13, 0x83b);
-            udelay(0x30d40);
-            lcd_write_reg(1, 0x90c); /* Display mode */
-            lcd_write_reg(2, 0x200);
-            lcd_write_reg(3, 0x1030);
-            lcd_write_reg(7, 5);
-            lcd_write_reg(8, 0x503);
-            lcd_write_reg(11, 0);
-            lcd_write_reg(12, 0);
-            /* Gamma control */
-            lcd_write_reg(0x30, 0x606);
-            lcd_write_reg(0x31, 0x606);
-            lcd_write_reg(0x32, 0x305);
-            lcd_write_reg(0x33, 2);
-            lcd_write_reg(0x34, 0x503);
-            lcd_write_reg(0x35, 0x606);
-            lcd_write_reg(0x36, 0x606);
-            lcd_write_reg(0x37, 0x200);
-
-            lcd_write_reg(0x11, 0x1f1e);
-            lcd_write_reg(0x38, 0xf0f);
-            /* Set initial LCD limits and RAM settings */
-            lcd_write_reg(0x40, 0); //BPP ?
-            lcd_write_reg(0x42, 0x9f00);
-            lcd_write_reg(0x43, 0);
-            lcd_write_reg(0x44, 0x7f00); /* Horizontal initial refresh zone [0 - 127] */
-            lcd_write_reg(0x45, 0x9f00); /* Vertical initial refresh zone [0 - 159] */
-
-            lcd_write_reg(14, 0x13);
-            lcd_write_reg(0xa9, 0x14);
-            lcd_write_reg(0xa7, 0x30);
-            lcd_write_reg(0xa8, 0x124);
-            lcd_write_reg(0x6f, 0x1d00);
-            lcd_write_reg(0x70, 3);
-            lcd_write_reg(7, 1);
-            lcd_write_reg(0x10, 0x1a10);
-            udelay(0x9c40);
-            lcd_write_reg(7, 0x21);
-            lcd_write_reg(7, 0x23);
-            udelay(0x9c40);
-            lcd_write_reg(7, 0x37); /* Seems to be "power on" */
-            break;
-        }
-        case LCD_TYPE_ONE:
-        {
-            lcd_write_reg(0, 1);
-            udelay(0x2710);
-            lcd_write_reg(0x11, 0x171b);
-            lcd_write_reg(0x12, 0);
-            lcd_write_reg(0x13, 0x80d);
-            lcd_write_reg(0x14, 0x18);
-            lcd_write_reg(0x10, 0x1a10);
-            udelay(0xc350);
-            lcd_write_reg(0x13, 0x81d);
-            udelay(0xc350);
-            lcd_write_reg(1, 0x90c); /* Display mode */
-            lcd_write_reg(2, 0x200);
-            lcd_write_reg(3, 0x1030);
-            lcd_write_reg(7, 5);
-            lcd_write_reg(8, 0x30a);
-            lcd_write_reg(11, 4);
-            lcd_write_reg(12, 0);
-            /* Gamma control */
-            lcd_write_reg(0x30, 0x300);
-            lcd_write_reg(0x31, 0);
-            lcd_write_reg(0x32, 0);
-            lcd_write_reg(0x33, 0x404);
-            lcd_write_reg(0x34, 0x707);
-            lcd_write_reg(0x35, 0x700);
-            lcd_write_reg(0x36, 0x703);
-            lcd_write_reg(0x37, 4);
-
-            lcd_write_reg(0x38, 0);
-            /* Set initial LCD limits and RAM settings */
-            lcd_write_reg(0x40, 0);
-            lcd_write_reg(0x42, 0x9f00); /* LCD Display Start Address Register 0 */
-            lcd_write_reg(0x43, 0); /* LCD Display Start Address Register 1 */
-            lcd_write_reg(0x44, 0x7f00); /* Horizontal initial refresh zone [0 - 127] */
-            lcd_write_reg(0x45, 0x9f00); /* Vertical initial refresh zone [0 - 159] */
-
-            lcd_write_reg(7, 1);
-            udelay(0x2710);
-            lcd_write_reg(7, 0x21);
-            lcd_write_reg(7, 0x23);
-            udelay(0x2710);
-            lcd_write_reg(7, 0x1037);
-            udelay(0x2710);
-            lcd_write_reg(7, 0x35);
-            lcd_write_reg(7, 0x36);
-            lcd_write_reg(7, 0x37);
-            udelay(10000);
-            break;
-        }
-        default:
-            break;
-    }
-}
-
-static void send_update_rect(uint8_t x, uint8_t y, uint8_t w, uint8_t h)
-{
-    /* Set horizontal refresh zone */
-    lcd_write_reg(0x44, (x | (y + w - 1) << 0x8));
-    /* Set vertical refresh zone */
-    lcd_write_reg(0x45, (y | (y + h - 1) << 0x8));
-    lcd_write_reg(0x21, x | y << 8);
-    /* Set register index to 0x22 to write screen data. 0 is mock value */
-    lcd_write_reg(0x22, 0);
-}
-
-static void setup_lcd_pins(void)
-{
-    imx233_lcdif_setup_system_pins(16);
-     /* lcd_rd */
-    imx233_pinctrl_acquire(0, 9, "lcd rd");
-    imx233_pinctrl_set_function(0, 9, PINCTRL_FUNCTION_GPIO);
-    imx233_pinctrl_set_gpio(0, 9, false);
-    /*
-     * This pin is important to know the LCD type
-     * There are two types that require two different initialization sequences
-     */
-    /* lcd_tp */
-    imx233_pinctrl_acquire(3, 12, "lcd type");
-    imx233_pinctrl_set_function(3, 12, PINCTRL_FUNCTION_GPIO);
-    imx233_pinctrl_enable_gpio(3, 12, false);
-    /* Sense LCD Type */
-    lcd_type = imx233_pinctrl_get_gpio(3, 12) ? LCD_TYPE_ONE : LCD_TYPE_ZERO;
-}
-
-static void setup_parameters(void)
-{
-    imx233_lcdif_init();
-    imx233_lcdif_enable(true);
-    imx233_lcdif_set_word_length(16);
-    imx233_lcdif_set_data_swizzle(false);
-    imx233_lcdif_set_timings(2, 1, 1, 1);
-    BF_WR(LCDIF_CTRL, MODE86_V(8080_MODE));
-
-    imx233_lcdif_reset_lcd(true);
-    udelay(50);
-    imx233_lcdif_reset_lcd(false);
-    udelay(10);
-    imx233_lcdif_reset_lcd(true);
-}
-
-void lcd_init_device(void)
-{
-    /* Setup interface pins */
-    setup_lcd_pins();
-    /* Set LCD parameters */
-    setup_parameters();
-    /* Send initialization sequence to LCD */
-    lcd_init_seq();
-}
-
-struct lcdif_cmd_t
-{
-    struct apb_dma_command_t dma;
-    uint32_t ctrl0;
-    uint32_t pad[4];
-} __attribute__((packed)) CACHEALIGN_ATTR;
-
-struct lcdif_cmd_t lcdif_dma;
-void lcd_update(void)
-{
-    unsigned size = LCD_WIDTH * LCD_HEIGHT * sizeof(fb_data);
-
-    send_update_rect(0,0,LCD_WIDTH,LCD_HEIGHT);
-    /* We can safely do the transfer in a single shot, since 160 * 128 * 2 < 65k,
-     * the maximum transfer size!
-     */
-    lcdif_dma.dma.cmd |= BF_OR(APB_CHx_CMD, CMDWORDS(1), XFER_COUNT(size), COMMAND(2));
-    lcdif_dma.ctrl0 = HW_LCDIF_CTRL & ~BM_LCDIF_CTRL_COUNT;
-    lcdif_dma.ctrl0 |= BF_OR(LCDIF_CTRL, COUNT(size/2), DATA_SELECT(1));
-    lcdif_dma.dma.buffer = FBADDR(0,0);
-    lcdif_dma.dma.cmd |= BM_APB_CHx_CMD_SEMAPHORE;
-
-    imx233_dma_start_command(APB_LCDIF, &lcdif_dma.dma);
-    imx233_dma_wait_completion(APB_LCDIF, HZ);
-}
-
-void lcd_update_rect(int x, int y, int w, int h)
-{
-    (void)x;
-    (void)y;
-    (void)w;
-    (void)h;
-    lcd_update();
-}
-
-#ifndef BOOTLOADER
-bool lcd_debug_screen(void)
-{
-    lcd_setfont(FONT_SYSFIXED);
-
-    while(1)
-    {
-        int button = get_action(CONTEXT_STD, HZ / 10);
-        switch(button)
-        {
-            case ACTION_STD_NEXT:
-            case ACTION_STD_PREV:
-            case ACTION_STD_OK:
-            case ACTION_STD_MENU:
-                lcd_setfont(FONT_UI);
-                return true;
-            case ACTION_STD_CANCEL:
-                lcd_setfont(FONT_UI);
-                return false;
-        }
-
-        lcd_clear_display();
-        lcd_putsf(0, 0, "LCD type: %d", lcd_type);
-        lcd_update();
-        yield();
-    }
-
-    return true;
-}
-#endif
diff --git a/firmware/target/arm/imx233/samsung-ypz5/powermgmt-target.h b/firmware/target/arm/imx233/samsung-ypz5/powermgmt-target.h
deleted file mode 100644
index 5d32bc5e9c..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/powermgmt-target.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2013 by Amaury Pouly
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#ifndef POWERMGMT_TARGET_H
-#define POWERMGMT_TARGET_H
-
-#include "config.h"
-#include "powermgmt-imx233.h"
-
-#define IMX233_CHARGE_CURRENT   100
-#define IMX233_STOP_CURRENT     10
-#define IMX233_TOPOFF_TIMEOUT   (30 * 60 * HZ)
-#define IMX233_CHARGING_TIMEOUT (4 * 3600 * HZ)
-#define IMX233_DIE_TEMP_HIGH    71
-#define IMX233_DIE_TEMP_LOW     56
-#define IMX233_BATT_TEMP_SENSOR 0
-#define IMX233_BATT_TEMP_HIGH   1100
-#define IMX233_BATT_TEMP_LOW    220
-
-#endif /*  POWERMGMT_TARGET_H */
diff --git a/firmware/target/arm/imx233/samsung-ypz5/powermgmt-ypz5.c b/firmware/target/arm/imx233/samsung-ypz5/powermgmt-ypz5.c
deleted file mode 100644
index 9d9ed7de99..0000000000
--- a/firmware/target/arm/imx233/samsung-ypz5/powermgmt-ypz5.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/***************************************************************************
- *             __________               __   ___.
- *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
- *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
- *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
- *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
- *                     \/            \/     \/    \/            \/
- * $Id$
- *
- * Copyright (C) 2013 by Amaury Pouly
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- ****************************************************************************/
-#include "config.h"
-#include "powermgmt-target.h"
-#include "power-imx233.h"
-
-
-const unsigned short battery_level_dangerous[BATTERY_TYPES_COUNT] =
-{
-    3400
-};
-
-const unsigned short battery_level_shutoff[BATTERY_TYPES_COUNT] =
-{
-    3300
-};
-
-/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
-const unsigned short percent_to_volt_discharge[BATTERY_TYPES_COUNT][11] =
-{
-    /* Sansa Fuze+ Li Ion 600mAH figured from discharge curve */
-    { 3100, 3650, 3720, 3750, 3780, 3820, 3880, 4000, 4040, 4125, 4230 },
-};
-
-/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
-const unsigned short percent_to_volt_charge[11] =
-{
-    /* Sansa Fuze+ Li Ion 600mAH figured from charge curve */
-    3480, 3790, 3845, 3880, 3900, 3935, 4005, 4070, 4150, 4250, 4335
-};
diff --git a/firmware/target/arm/imx233/touchscreen-imx233.c b/firmware/target/arm/imx233/touchscreen-imx233.c
index f98dc9b738..561b2c750a 100644
--- a/firmware/target/arm/imx233/touchscreen-imx233.c
+++ b/firmware/target/arm/imx233/touchscreen-imx233.c
@@ -23,9 +23,6 @@
 #include "kernel.h"
 #include "touchscreen-imx233.h"
 #include "stdlib.h"
-#ifdef SAMSUNG_YPZ5
-#include "pinctrl-imx233.h"
-#endif
 
 /* Description:
  * the driver basically has 2 modes:
@@ -82,24 +79,6 @@ static void touch_channel_irq(int chan)
     process();
 }
 
-#ifdef SAMSUNG_YPZ5
-/* On this target we need to manually setup pulldown pins,
- * using specific GPIO lines
- */
-static void pulldown_setup(bool xminus_enable, bool yminus_enable,
-    bool xplus_enable, bool yplus_enable)
-{
-    /* TX+ */
-    imx233_pinctrl_set_gpio(0, 25, xplus_enable);
-    /* TX- */
-    imx233_pinctrl_set_gpio(3, 15, xminus_enable);
-    /* TY+ */
-    imx233_pinctrl_set_gpio(0, 26, yplus_enable);
-    /* TY- */
-    imx233_pinctrl_set_gpio(1, 21, yminus_enable);
-}
-#endif
-
 static void kick_measure(bool pull_x, bool pull_y, bool detect, int src)
 {
 #if IMX233_SUBTARGET < 3700
@@ -116,9 +95,6 @@ static void kick_measure(bool pull_x, bool pull_y, bool detect, int src)
     imx233_icoll_enable_interrupt(INT_SRC_LRADC_CHx(touch_chan), true);
     imx233_lradc_enable_channel_irq(touch_chan, true);
     /* setup measurement: x- pull down and x+ pull up */
-#ifdef SAMSUNG_YPZ5
-    pulldown_setup(pull_x, pull_y, pull_x, pull_y);
-#endif
     imx233_lradc_setup_touch(pull_x, pull_y, pull_x, pull_y, detect);
     imx233_lradc_enable_touch_detect_irq(false);
     imx233_lradc_enable_channel_irq(touch_chan, true);
@@ -138,9 +114,6 @@ static void enter_state(enum touch_state_t state)
     switch(state)
     {
         case TOUCH_STATE_WAIT:
-#ifdef SAMSUNG_YPZ5
-            pulldown_setup(false, false, false, false);
-#endif
             imx233_lradc_setup_touch(false, false, false, false, true);
             imx233_lradc_enable_touch_detect_irq(true);
             break;