D2: Adjustable backlight brightness (sometimes fails when boosted, suggests I2C timing needs adjustment). Tweak lcd_enable() to behave more like other targets.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16967 a1c6a512-1295-4272-9138-f99709370657

3 files changed, 63 insertions, 40 deletions

diff --git a/firmware/target/arm/tcc780x/cowond2/backlight-cowond2.c b/firmware/target/arm/tcc780x/cowond2/backlight-cowond2.c
new file mode 100644
index 0000000000..07286bdd09
--- /dev/null
+++ b/firmware/target/arm/tcc780x/cowond2/backlight-cowond2.c
@@ -0,0 +1,56 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2008 by Rob Purchase
+ *
+ * All files in this archive are subject to the GNU General Public License.
+ * See the file COPYING in the source tree root for full license agreement.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+#include "backlight-target.h"
+#include "system.h"
+#include "backlight.h"
+#include "pcf50606.h"
+#include "tcc780x.h"
+
+static unsigned short backlight_brightness = DEFAULT_BRIGHTNESS_SETTING;
+
+int _backlight_init(void)
+{
+    _backlight_set_brightness(DEFAULT_BRIGHTNESS_SETTING);
+    return true;
+}
+
+void _backlight_set_brightness(int brightness)
+{
+    backlight_brightness = brightness;
+
+    int level = disable_irq_save();
+    pcf50606_write(PCF5060X_PWMC1, 0xe1 | (14-backlight_brightness)<<1);
+    pcf50606_write(PCF5060X_GPOC1, 0x3);
+    restore_irq(level);
+    
+    if (brightness > 0)
+        _backlight_on();
+    else
+        _backlight_off();
+}
+
+void _backlight_on(void)
+{
+    GPIOA_SET = (1<<6);
+}
+
+void _backlight_off(void)
+{
+    GPIOA_CLEAR = (1<<6);
+}
diff --git a/firmware/target/arm/tcc780x/cowond2/backlight-target.h b/firmware/target/arm/tcc780x/cowond2/backlight-target.h
index 0563fc20f5..0ddff85544 100644
--- a/firmware/target/arm/tcc780x/cowond2/backlight-target.h
+++ b/firmware/target/arm/tcc780x/cowond2/backlight-target.h
@@ -19,22 +19,9 @@
 #ifndef BACKLIGHT_TARGET_H
 #define BACKLIGHT_TARGET_H
 
-#include "tcc780x.h"
-
-#define _backlight_init() true
-
-/* nb: we can set the backlight intensity using PCF50606 register 0x35 */
-   
-static inline void _backlight_on(void)
-{
-    /* Enable backlight */
-    GPIOA_SET = (1<<6);
-}
-
-static inline void _backlight_off(void)
-{
-    /* Disable backlight */
-    GPIOA_CLEAR = (1<<6);
-}
+int _backlight_init(void);
+void _backlight_on(void);
+void _backlight_off(void);
+void _backlight_set_brightness(int brightness);
 
 #endif
diff --git a/firmware/target/arm/tcc780x/cowond2/lcd-cowond2.c b/firmware/target/arm/tcc780x/cowond2/lcd-cowond2.c
index 54466f428b..8a268db4cc 100644
--- a/firmware/target/arm/tcc780x/cowond2/lcd-cowond2.c
+++ b/firmware/target/arm/tcc780x/cowond2/lcd-cowond2.c
@@ -23,7 +23,6 @@
 #include "lcd.h"
 #include "system.h"
 #include "cpu.h"
-#include "i2c.h"
 
 /* GPIO A pins for LCD panel SDI interface */
 
@@ -100,16 +99,6 @@ static void lcd_write_reg(unsigned char reg, unsigned short val)
 }
 
 
-/* TODO: The existing pcf50606 drivers are target-specific, so the following 
-   lonely function exists until a D2 driver exists. */
-
-void pcf50606_write_reg(unsigned char reg, unsigned char val)
-{
-    unsigned char data[] = { reg, val };
-    i2c_write(0x10, data, 2);
-}
-
-
 /*
    TEMP: Rough millisecond delay routine used by the LCD panel init sequence.
    PCK_TCT must first have been initialised to 2Mhz by calling clock_init().
@@ -190,9 +179,6 @@ static void lcd_display_on(void)
     lcd_write_reg(10, 0x111F);
     sleep_ms(10);
 
-    pcf50606_write_reg(0x35, 0xe9); /* PWMC1 - backlight power (intensity) */
-    pcf50606_write_reg(0x38, 0x3);  /* GPOC1 - ? */
-
     /* tell that we're on now */
     display_on = true;
 }
@@ -213,9 +199,6 @@ static void lcd_display_off(void)
     
     /* kill power to LCD panel (unconfirmed) */
     GPIOA_CLEAR = (1<<16);
-    
-    /* also kill the backlight, otherwise LCD fade is visible on screen */
-    GPIOA_CLEAR = (1<<6);
 }
 
 
@@ -226,14 +209,14 @@ void lcd_enable(bool on)
 
     if (on)
     {
+        lcd_display_on();
         LCDC_CTRL |= 1;     /* controller enable */
-        GPIOA_SET = (1<<6); /* backlight enable - not visible otherwise */
         lcd_update();       /* Resync display */
     }
     else
     {
-        LCDC_CTRL &= ~1;      /* controller disable */
-        GPIOA_CLEAR = (1<<6); /* backlight off */
+        LCDC_CTRL &= ~1;    /* controller disable */
+        lcd_display_off();
     }
 }
 
@@ -290,9 +273,6 @@ void lcd_init_device(void)
     
     /* enable LTV250QV panel */
     lcd_display_on();
-    
-    /* turn on the backlight, without it the LCD is not visible at all */
-    GPIOA_SET = (1<<6);
 }